Search below for:

Cisco IOS Command Reference Master Index, Release 12.1

Symbols  Numerics  A   B   C   D   E    F   G   H   I   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Z

Symbols

! character, ping command output     FR-572

# character, privileged EXEC mode prompt     FR-8

. character, ping command output     FR-572

/etc/printcap file, modifying for printing     FR-80

> prompt     FR-283

| character   P3R-150

Numerics

100VG-AnyLAN port adapter

configuring     IR-153

displaying information     IR-290

7-bit character set, changing for session     FR-105

8-bit character set

EXEC and configuration commands

changing for a session     FR-94

setting default value     FR-58

setting for line     FR-67

hardware data bits

changing for session     FR-88

configuring on a line     FR-56

software character bits

changing for session     FR-89

setting for line     FR-57

special character width

changing for session     FR-105

configuring default     FR-59

configuring for line     FR-84

A

AAA (authentication, authorization, and accounting)

server groups     SR-92, SR-117

virtual profiles, configuring     DR-844

aaa accounting command     SR-70

aaa accounting connection h323 command     SR-73

aaa accounting nested command     SR-74

aaa accounting send stop-record authentication failure command     SR-75

aaa accounting suppress null-username command     SR-76

aaa accounting update command     SR-77

aaa authentication arap command     SR-4

aaa authentication banner command     SR-6

aaa authentication enable default command     SR-8

aaa authentication fail-message command     SR-10

aaa authentication login command     SR-12

aaa authentication nasi command     SR-14

aaa authentication password-prompt command     SR-16

aaa authentication ppp command     SR-17

aaa authentication username-prompt command     SR-19

aaa authorization command     SR-56

aaa authorization config-commands command     SR-60

aaa authorization configuration default command     DR-2

aaa authorization ipmobile command     P1R-238

aaa authorization reverse-access command     SR-61

aaa dnis map accounting network group command     SR-79

aaa dnis map authentication ppp group command     SR-21

aaa group-configuration command     DR-3

aaa group server command     SR-117

aaa group server radius command     SR-92

aaa nas-port extended command     SR-93

aaa new-model command     SR-23

aaa processes command     SR-24

aaa route download command     DR-5

AAA server

dialer access     DR-125

group, configuring     DR-3

static route configuration, downloading     DR-2

AAL (ATM adaptation layer)

configuring     WR-78

displaying     WR-121, WR-128, WR-135

AAL3/4

ATM

enabling     WR-4

(example)     WR-4

AAL5 NLPID     WR-129, WR-136

abbreviating commands, software recognition     FR-3

ABR (available bit rate)

configuration (example)     WR-3

rate-factor configuration     WR-5

rate-factor (example)     WR-5

abr command     WR-2

absolute command     FR-666

absolute-timeout command     DR-6, FR-76

accept dialin command     DR-7

accept dialout command     DR-9

accept-lifetime command     P1R-616

accept reverse charging, X.25     WR-394

access-class (LAT) command     DR-11

access-class command     WR-346

access control

AppleTalk

access group     P2R-21

distribute list     P2R-37, P2R-39

zone filter     P2R-57

zones     P2R-2

ARA     DR-16, DR-17, DR-22

DECnet     P3R-137, P3R-149

IPX     P2R-209, P2R-246

LAT

access conditions     DR-317

connections     DR-11

group list     DR-325

group list name assignments     DR-320

VINES     P3R-57  to P3R-59

XNS

extended     P3R-348

standard     P3R-351

access-enable command     SR-142

access-expression command     B1R-90

access expressions, configuring     B1R-90

access groups, DECnet     P3R-119

access-list (connect initiate) command

DECnet     P3R-110

access-list (DECnet extended) command     P3R-108

access-list (DECnet standard) command     P3R-114

access-list (encryption) command     SR-250

access-list (extended-ibm) command     B1R-4

access-list (IPX extended) command     P2R-204

access-list (IPX standard) command     P2R-209

access-list (NLSP) command     P2R-212

access-list (standard-ibm) command     B1R-7

access-list (type-code) command     IR-3

access-list (type-code-ibm) command     B1R-8

access-list (XNS extended) command     P3R-348

access-list (XNS standard) command     P3R-351

access list, creating     XR-327

access-list additional-zones command     P2R-2

access-list cable-range command     P2R-4

access list command     DR-922, DR-928

access-list command     B1R-92

IPX

extended     P2R-204, P2R-229

NLSP     P2R-212

SAP     P2R-215

violation logging     P2R-204, P2R-229

access-list includes command     P2R-6

access-list nbp command     P2R-8

access-list network command     P2R-11

access-list other-access command     P2R-13

access-list other-nbps command     P2R-15

access-list rate-limit command     QR-2

access lists

Apollo Domain

creating     P3R-3

interface, applying to     P3R-2

AppleTalk

network numbers

cable range     P2R-4

creating     P2R-11

including     P2R-6

interfaces     P2R-21

other access     P2R-13

within     P2R-17

zones, creating     P2R-2, P2R-19

AppleTalk, displaying     P2R-110

bridging (table)     B1R-579

class maps criteria, configuring     QR-77

DDR

dialing control     DR-154

types and numbers supported (table)     DR-154

DECnet

extended     P3R-108

filter connect initiate packets     P3R-110

standard     P3R-114

dynamic

temporary entries, clearing manually     SR-142

IBM NetBIOS, byte offset     B1R-193

IP

BGP access list filters     P1R-516, P1R-538

time-based     FR-666, FR-708

IPX

extended     P2R-204

named     P2R-248

NetBIOS     P2R-304, P2R-306, P2R-424

NLSP route aggregation     P2R-212

routing table filtering     P2R-289

SAP     P2R-215

standard     P2R-209

time-based     P2R-205, P2R-230, P2R-428

time-range     FR-744

LSAP, using in access expressions     B1R-90

MAC address, configuring     B1R-7

netbios-host     B1R-91

rate-limited     QR-149

rate limit statistics (table)     QR-150

SNAP type, using in access expressions     B1R-90

SRB

configuring     B1R-92

Ethernet type codes (table)     B1R-579

filtering by protocol type     B1R-92

traffic shaping based on     QR-209

transparent bridging

assigning to bridge group     B1R-33

assigning to interface     B1R-29, B1R-33

associating with interface and bridge group     B1R-41

extended, configuring     B1R-4

filtering MAC addresses     B1R-36

qualifications for using     B1R-5

type codes

configuring     B1R-8

Ethernet (table)     B1R-579

VINES

displaying     P3R-25

extended     P3R-54

simple     P3R-57

standard     P3R-59

XNS standard     P3R-351

See also IPSec

access-list within command     P2R-17

access-list zone command     P2R-19

access-profile command     SR-26

replace command form (caution)     SR-27

using per-user configuration (caution)     SR-27

access-template command     SR-143

accounting

DECnet

database entries, deleting     P3R-116

database threshold     P3R-124

enabling     P3R-120

filters     P3R-122

maximum transit entries     P3R-125

overloaded acct-session ID field     MR-280

syslog messages     MR-283

vendor-specific RADIUS attributes     MR-282

accounting (gatekeeper) command     SR-83

accounting, IPX

configuring     P2R-250

database threshold     P2R-254

deleting database entries     P2R-220

enabling     P2R-250

filters     P2R-252

maximum transit entries     P2R-255

accounting command     SR-81

acc-qos command     MR-2

activation character, setting     FR-54

activation-character command     FR-54

active signalling     XR-297

adapter command     B2R-196

address command     SR-432

addressed-key command     SR-434

addresses

alternate destinations, defining     WR-396

primary IP     P1R-14

secondary IP     P1R-14

SMDS

displaying assigned     WR-327, WR-328

effect of bridging     WR-331

mapping IP multicast     WR-343

multicast     WR-336

multicast ARP     WR-338

structure of     WR-331

X.121

called, suppressing     WR-471

calling

suppressing     WR-472

updating     WR-482

setting     WR-395

addresses, exchanging     XR-143

address-family command     XR-3

address ranges, summarizing

IS-IS for IP     P1R-398, P1R-478

OSPF     P1R-337

address-registration, ATM (example)     WR-6

address translation gateway

See ATG, DECnet

adjacency

TARP blacklist

displaying     P3R-306

setting     P3R-317

adjacency levels, IS-IS for IP, specifying     P1R-442, P1R-443

administrative distance

BGP, setting     P1R-510

defaults (table)     P1R-409, P1R-618

IP Enhanced IGRP, setting     P1R-409

OSPF default     P1R-410, P1R-618

RIP default     P1R-410, P1R-618

administrative filtering, statically configured stations     B1R-10

ADT Security Systems

primary end of link, specifying     B1R-334

AESOs (Auxiliary Extended Security Options), attaching to interfaces     SR-500

agent set control unit

See ALPS, ASCU

aggregate address, configuring for BGP     P1R-482

aggregate-address command     P1R-482

algorithms

encryption

See IKE, algorithms

hash

See IKE, algorithms

alias command     FR-668

aliases

creating for commands     FR-668

default     FR-668

displaying     FR-724

alias static command     MR-4

all-nets flooding, IPX     P2R-282

allocate lu command     B2R-304

all-routes explorer packets, definition     B1R-199

ALPS (Airline Product Set)

alarms

ASCU     B1R-535

circuits     B1R-536

peer     B1R-537

ASCU

displaying status     B1R-573

logical address     B1R-530

physical address     B1R-531

poll     B1R-538

circuit

activating     B1R-533, B1R-539

deactivating     B1R-569

default     B1R-534

definition     B1R-532

disabling     B1R-545

displaying status     B1R-574

message queue     B1R-547

remote CPE     B1R-532

counters     B1R-570

error message display     B1R-540

error states     B1R-553, B1R-560

HLD definition     B1R-548

IP address     B1R-549

messages     B1R-551

multiplexing     B1R-552

P1024B protocol     B1R-571

peer

alarms     B1R-537

displaying status     B1R-575

partner CPE     B1R-558

TCP     B1R-557

polls

intervals     B1R-556

limits     B1R-564

minimum requirement     B1R-554

service messages

content     B1R-563

intervals     B1R-561

lists     B1R-562

TCP peers     B1R-546, B1R-557

timeouts     B1R-565, B1R-566

X.121 address     B1R-567

X.25 interface     B1R-541

X.25 virtual circuit     B1R-543

alps a1-map a2-map command     B1R-530

alps ascu command     B1R-531

alps circuit command     B1R-532

alps connection-type permanent command     B1R-533

alps default-circuit command     B1R-534

alps enable-alarms ascu command     B1R-535

alps enable-alarms circuit command     B1R-536

alps enable-alarms peer command     B1R-537

alps enable-ascu command     B1R-538

alps enable-circuit command     B1R-539

alps error-display command     B1R-540

alps host-hld host-link command     B1R-541

alps hostlink command     B1R-543

alps idle-timer command     B1R-545

alps keepalive command     B1R-546

alps lifetime-timer command     B1R-547

alps local-hld remote-hld command     B1R-548

alps local-peer command     B1R-549

alps matip-close-delay command     B1R-550

alps max-msg-length command     B1R-551

alps mpx command     B1R-552

alps n1 command     B1R-553

alps n2 command     B1R-554

alps n3 command     B1R-555

alps poll-pause command     B1R-556

alps primary-peer command     B1R-557

alps remote-peer command     B1R-558

alps retry-option command     B1R-560

alps service-msg-interval command     B1R-561

alps service-msg-list command     B1R-562

alps service-msg-list number command     B1R-563

alps servlim command     B1R-564

alps t1 command     B1R-565

alps t2 command     B1R-566

alps translate command     B1R-567

alps update-circuit command     B1R-568

alt-dial command     MR-6

AMI (alternate mark inversion) line coding     IR-455

anchoring regular expressions     DR-926

Annex G     WR-348, WR-372, WR-381, WR-433

answer-address command     MR-7

AO/DI (Always On/Dynamic ISDN)

BAP number

formats     DR-440

prefix     DR-441

clients, enabling     DR-877

mapping     DR-878

multilink PPP bundle, receive-only mode     DR-458

apollo access-group command     P3R-2

apollo access-list command     P3R-3

Apollo Domain

access lists

applying to an interface     P3R-2

creating     P3R-3

ARP table, displaying entries     P3R-11

interfaces, displaying status     P3R-12

load sharing     P3R-5

maximum paths, setting     P3R-5

parallel paths, choosing between     P3R-5

routing

enabling     P3R-8

interface, enabling on     P3R-6

routing table entries

adding     P3R-7

displaying     P3R-14

update interval     P3R-9

static routes, adding to routing table     P3R-7

traffic, displaying statistics     P3R-16

apollo maximum-paths command     P3R-5

apollo network command     P3R-6

apollo route command     P3R-7

apollo routing command     P3R-8

apollo update-time command     P3R-9

append-after command     XR-5

AppleTalk

access control

access group     P2R-21

distribute list     P2R-37, P2R-39

zone filter     P2R-57

zones     P2R-2

access lists

cable range     P2R-4

displaying     P2R-110

interface cable range     P2R-21

network numbers     P2R-21

other access     P2R-13

range-overlaps     P2R-6

within     P2R-17

network numbers, creating     P2R-11

zones, creating     P2R-2, P2R-19

addresses

format     P2R-24

remapping     P2R-46

adjacent networks     P2R-112

adjacent routers     P2R-150

ARP table entries

deleting     P2R-103

displaying     P2R-114

gleaning     P2R-59

ARP table update interval     P2R-25, P2R-27, P2R-29

AURP (AppleTalk Update Routing Protocol)

enabling     P2R-77

last-heard-from timer     P2R-30

private path database     P2R-117

routing update interval     P2R-31

tunnel interface, assigning AppleTalk domain-group number     P2R-41

update-events queue     P2R-116

cable ranges

assigning to interface     P2R-32

remapping     P2R-46

CAP compatibility     P2R-61

checksum     P2R-33

discovery mode     P2R-35

enabling     P2R-23, P2R-32, P2R-35

startup process     P2R-35

domain

hop count     P2R-43

information, displaying domain-related information     P2R-121

number, assigning     P2R-41

eigrp-bandwidth-percent command     P2R-50

eigrp interfaces, displaying     P2R-123

eigrp log-neighbor-changes command     P2R-51

Enhanced IGRP

enabling     P2R-77

hello packets     P2R-53

hold time     P2R-53

neighbors

displaying     P2R-125

query packets     P2R-52

route redistribution     P2R-83

split horizon     P2R-52

timers, adjusting     P2R-53

topology table     P2R-127

update packets     P2R-52

EtherTalk     P2R-1

extended interfaces     P2R-35

assigning cable range     P2R-32

fast switching     P2R-82

cache entries displaying     P2R-119

configuring     P2R-82

FDDITalk     P2R-1, P2R-76

filters

data packet, applying     P2R-21

GZL, applying     P2R-39, P2R-57

partial zone     P2R-75

routing table     P2R-37, P2R-39

floating static routes     P2R-90

displaying     P2R-164

nonextended networks     P2R-92

free-trade zone     P2R-56

GZL

filters     P2R-39, P2R-57

replies     P2R-39, P2R-57

hop count     P2R-43

interenterprise routing

addresses, remapping     P2R-46

AURP tunnel interface     P2R-41

cable ranges

remapping     P2R-46

domain name     P2R-45

domain number     P2R-45

domains     P2R-45

hop count     P2R-43

remap, displaying     P2R-153

remapping     P2R-46

interfaces

configuring dynamically     P2R-35

displaying     P2R-135

domain number, assigning     P2R-41

internetwork parameters, displaying     P2R-132

IPTalk

/etc/services file     P2R-63

IP encapsulation, configuring     P2R-61

UDP port numbers     P2R-63

Kinetics IPTalk     P2R-61

LocalTalk     P2R-1

MacIP

addresses, allocating     P2R-67, P2R-71

clients, displaying     P2R-139

servers, displaying     P2R-140

servers, establishing     P2R-69

traffic statistics     P2R-144, P2R-166

maximum paths, defining     P2R-73

NBP

lookup interval     P2R-74

lookup type     P2R-65

name registration table     P2R-148

registered entities     P2R-199

services, displaying     P2R-146

tests     P2R-199

neighbor table     P2R-104

network events, logging     P2R-55

nonextended interface, assigning address     P2R-23

Phase 1/Phase 2 network compatibility     P2R-79

pre-FDDITalk packets, enabling recognition     P2R-76

proxy network numbers, assigning     P2R-79

routes, poisoned     P2R-158, P2R-160

routing     P2R-84

extended interface     P2R-35

routing protocol, specifying     P2R-77

routing table

displaying entries     P2R-156

update timers, setting     P2R-95

routing updates

advertising     P2R-81

interval timer     P2R-86

retransmission, disabling     P2R-89

strict checking     P2R-94

stub mode, enabling     P2R-87

timers, setting     P2R-95

RTMP

enabling     P2R-77

routes without zones     P2R-81

routing updates, disabling transmission     P2R-89

strict checking of routing updates     P2R-94

stub mode, enabling     P2R-87

service types (table)     P2R-65

SMDS, configuring over     WR-336

SMRP

enabling for     P2R-196

fast-switching, enabling on a port     P2R-194

fast-switching cache table, clearing entries     P2R-108

fast-switching cache table, displaying     P2R-180

sockets     P2R-162

static routes

displaying     P2R-164

overriding     P2R-90, P2R-92

test mode, entering     P2R-199

TokenTalk     P2R-1

traffic statistics     P2R-166

tunneling, Cayman     IR-476

ZIP

query interval     P2R-99

reply filter, creating     P2R-100

zone

assigning name     P2R-101

displaying     P2R-172

name format     P2R-101

special characters     P2R-101

Zone Information Protocol

See ZIP

appletalk access-group command     P2R-21

appletalk address command     P2R-23

appletalk alternate-addressing command     P2R-24

appletalk arp interval command     P2R-25

appletalk arp retransmit-count command     P2R-27

appletalk arp-timeout command     P2R-29

appletalk aurp tickle-time command     P2R-30

appletalk cable-range command     P2R-32

appletalk checksum command     P2R-33

appletalk client-mode command     P2R-34

appletalk discovery command     P2R-35

appletalk distribute-list in command     P2R-37

appletalk distribute-list out command     P2R-39

appletalk domain-group command     P2R-41

appletalk domain hop-reduction command     P2R-43

appletalk domain name command     P2R-45

appletalk domain remap-range command     P2R-46

appletalk eigrp active-time command     P2R-48

appletalk eigrp-bandwidth-percent command     P2R-50

appletalk eigrp log-neighbor-changes command     P2R-51

appletalk eigrp split-horizon command     P2R-52

appletalk eigrp-timers command     P2R-53

appletalk event-logging command     P2R-55

appletalk free-trade-zone command     P2R-56

appletalk getzonelist-filter command     P2R-57

appletalk glean-packets command     P2R-59

appletalk ignore-verify-errors command     P2R-60

appletalk iptalk-baseport command     P2R-63

appletalk iptalk command     P2R-61

appletalk lookup-type command     P2R-65

appletalk macip server command     P2R-69

appletalk macip static command     P2R-71

appletalk maximum-paths command     P2R-73

appletalk name-lookup interval command     P2R-74

appletalk permit-partial-zones command     P2R-75

appletalk pre-fdditalk command     P2R-76

appletalk protocol command     P2R-77

appletalk proxy-npb command     P2R-79

appletalk require-route-zones command     P2R-81

appletalk route-cache command     P2R-82

appletalk route-redistribution command     P2R-83

appletalk routing command     P2R-84

appletalk rtmp jitter command     P2R-86

appletalk rtmp-stub command     P2R-87

appletalk send-rtmps command     P2R-89

appletalk static cable command     P2R-92

appletalk static cable-range     P2R-90

appletalk static cable-range command     P2R-90

appletalk static network command     P2R-92

appletalk strict-rtmp-checking command     P2R-94

appletalk timers command     P2R-95

appletalk virtual-net command     P2R-97

appletalk zip-reply-filter command     P2R-100

appletalk zone command     P2R-101

application command     MR-9

APS (automatic protection switching of packet-over-SONET circuits), protect interface     IR-13, IR-17

aps authenticate command     IR-5

aps force command     IR-6

aps group command     IR-8

aps lockout command     IR-10

aps manual command     IR-11

aps protect command     IR-13

aps revert command     IR-14

aps timers command     IR-15

aps unidirectional command     IR-16

aps working command     IR-17

ARA (AppleTalk Remote Access)

access control     DR-16, DR-17, DR-22

clients, virtual terminal line connection     DR-804, DR-813, DR-822

monitoring     DR-531

sessions, automatic startup     DR-35

arap authentication command     DR-13, SR-29

using list-names

(caution)     SR-29

arap callback command     DR-13

arap dedicated command     DR-14

arap enable command     DR-15

arap net-access-list command     DR-16

arap network command     DR-17

arap noguest command     DR-18

arap require-manual-password command     DR-19

arap timelimit command     DR-20

arap warningtime command     DR-21

arap zonelist command     DR-22

area-address command     P2R-218

area authentication command     P1R-332

area default-cost command     P1R-334

area nssa command     P1R-336

area-password command     P1R-436

area range command     P1R-337

area stub command     P1R-339

area virtual-link command     P1R-341

ARP (Address Resolution Protocol)

displaying accounting information     IR-303

SMDS, enabling     WR-324, WR-334, WR-336

SMDS broadcast messages     WR-338

arp arpa command     P1R-5

ARP cache

See ARP table

arp command     P1R-4, WR-324

arp probe command     P1R-5

ARP server (example)     WR-8

arp snap command     P1R-5

ARP table

Apollo Domain     P3R-11

AppleTalk

gleaning entries     P2R-59

update interval     P2R-25, P2R-27, P2R-29

LANE dynamic entries, clearing     XR-20

timeout     P1R-7

VINES     P3R-62

arp timeout command     P1R-7

ASCII (American Standard Code Interchange)

activation character     FR-54

character widths     FR-84, FR-105

character set (table)     FR-825

disconnect character     FR-60

dispatch character     FR-61, FR-90

escape character     FR-66, FR-93

hold character     FR-69, FR-96

padding     FR-78, FR-101

start character     DR-766, FR-107

stop character     DR-769, FR-109

AS (autonomous system) number     XR-226

asp addr-offset command     B1R-332

AS path     XR-187

asp role command     B1R-334

asp rx-ift command     B1R-335

assigning LVC quantity     XR-320

async-bootp command     FR-322

async default ip address command

See peer default ip address command

async default routing command     DR-24

async dynamic address command     DR-25

async dynamic routing command     DR-26

asynchronous interfaces

AUX port configured as     DR-24

compression, ignore-pfc option for async drivers     IR-69

group ranges     DR-212

groups, designating     IR-149

members     DR-367

routing, configuring manually     DR-26

async mode dedicated command     DR-28

async mode interactive command     DR-29

AT, modem attention commands     DR-665

ATG (address translation gateway)

DECnet, configuring     P3R-138

ATM (Asynchronous Transfer Mode)

ABR rate-factor (example)     WR-5

address NSAP (example)     WR-29

addresses multicast (example)     WR-25

address-registration

configuration     WR-6

(example)     WR-6

AIP filter register

configuration (example)     WR-46

ARP server (example)     WR-8

channels

maximum, configuration (example)     WR-21

Cisco 4500 series

loopback for OS-3, DS3, E3 interfaces     WR-99

DS3

framing (example)     WR-16

scrambling (example)     WR-10

E.164 addresses

configuring     WR-41

(example)     WR-41

E.164 auto conversion (example)     WR-11

E3 framing (example)     WR-17

E3-scramble (example)     WR-12

ESI address (example)     WR-14

exception queue length (example)     WR-15

framing

DS3 (example)     WR-16

E3 (example)     WR-17

ILMI keepalives (example)     WR-18

ilmi PVC discovery (example)     WR-19

interface     XR-73

interfaces

displaying     WR-120

(example)     WR-95

keepalive timer (example)     WR-179

line build-out (example)     WR-20

loopback (example)     WR-99

loopback mode

Cisco 4500 series, OC-3, DS3, E3 interfaces     WR-99

maximum number of VCs, configuring     WR-23

MID per VC (example)     WR-24

MPLS subinterface     XR-351

multicast addresses (example)     WR-25

multipoint intervals configuring (example)     WR-26

NSAP address     WR-28

(example)     WR-29

OAM cell flush (example)     WR-30

permanent rate queues

configuring     WR-35

(example)     WR-36

point-to-multipoint SVC     P1R-774

poll timer (example)     WR-181

protocol addresses, mapping (example)     WR-74

PVC discovery (example)     WR-19

raw queue size configuration (example)     WR-37

receive buffers configuration (example)     WR-38

scrambling DS3 (example)     WR-10

signalling, point-to-multipoint (example)     WR-27

SMDS     WR-41

AAL3/4 encapsulations     WR-25

broadcast addresses     WR-25

multicast addresses     WR-25

multicast addresses, configuring (example)     WR-25

SONET PLIM     IR-18

configuration (example)     WR-42

speed     WR-35

SSCOP     WR-176

SSCOP connection control timer (example)     WR-178

SSCOP receiver window (example)     WR-182

SSCOP retry count (example)     WR-180

SSCOP transmitter window (example)     WR-183

static maps, displaying     WR-123

subinterfaces     XR-351

configuring     WR-94

SVC

disabling     WR-39

disabling (example)     WR-39

point-to-multipoint     P1R-774

traffic information, displaying     WR-139, WR-141

traffic shaping, strict

enabling     WR-40

(example)     WR-40

transmit buffers configuration (example)     WR-43

transmit clock enabling (example)     WR-9

unicast addresses     WR-41

UNI version configuration (example)     WR-44

vc-per-vp (example)     WR-45

VCs

bumping rules, configuring     QR-9

class broadcast     WR-48

VC status, displaying     P1R-819

virtual circuit     XR-320

virtual circuits maximum, configuration (example)     WR-23

atm aal aal3/4 command     WR-4

atm abr rate-factors command     WR-5

atm-address command     XR-6

atm address-registration command     WR-6

atm arp-server command     WR-7

atm clock internal command     WR-9

atm compression command     MR-13

ATM-DXI (Asynchronous Transfer Mode-Data Exchange Interface)     IR-99

AAL encapsulations     WR-76

encapsulations (example)     WR-77, WR-82

protocols supported for maps     WR-74

requires ADSU     WR-74

atm ds3-scramble command     WR-10

atm e164 auto-conversion command     WR-11

atm e3-scramble command     WR-12

atm esi-address command     WR-13

atm exception-queue command     WR-15

atm framing (DS3) command     WR-16

atm framing (E3) command     WR-17

atm ilmi-keepalive command     WR-18

atm ilmi-pvc-discovery command     WR-19

atm lbo command     WR-20

atm max channels command     WR-21

atm max-channels command     WR-21

atm maxvc command     WR-23

atm mid-per-vc command     WR-24

atm multicast command     WR-25

atm multipoint-interval command     WR-26

atm multipoint-signalling command     WR-27

atm nsap-address command     WR-28

atm oam flush command     WR-30

atm oversubscribe command     WR-31

atm pvp command     WR-33

atm rate-queue command     WR-35

atm rawq-size command     WR-37

atm rxbuff command     WR-38

atm scramble-enable command     MR-14

atmsig close atm command     WR-39

atm sig-traffic-shaping strict command     WR-40

atm smds-address command     WR-41

atm sonet command     IR-18

atm sonet stm-1 command     WR-42

ATM tag switching, enabling     XR-353

atm txbuff command     WR-43

atm uni-version command     WR-44

ATM VC bundles     WR-92

broadcast, configuring     WR-48

creating     QR-12

encapsulation     WR-79

members

parameters, bump     QR-9

parameters, oam-bundle     QR-88

parameters, precedence     QR-92

parameters, protect     QR-111

parameters, ubr     WR-185

parameters, ubr+     WR-188

parameters, vbr-nrt     WR-191

modifying     QR-12

OAM management, configuring     WR-105

parameters

broadcast     WR-48

class     QR-17, WR-70

displaying     QR-151

encapsulation     WR-78, WR-79

inarp     WR-92

Inverse ARP     WR-92

oam retry     WR-105

pvc-bundle     QR-113

statistics, displaying     QR-153

atm vc-per-vp command     WR-45

atm video aesa command     MR-15

ATM virtual circuit configuration commands

cbr     MR-148

atm vp-filter command     WR-46

attach command     FR-534

attach shelf command     FR-748

authen before-forward command     DR-30

authentication

CAs     SR-406

IP Enhanced IGRP packets     P1R-412

MD5, RIP     P1R-634

See also IKE, authentication; MD5 authentication

authentication (IKE policy) command     SR-436

authentication proxy commands     SR-229

authentication translate option

mapping to virtual interface template command     DR-810, DR-831

authorization command     SR-65

autobaud command     FR-55

autocommand command     DR-31

autoconfigure discovery command     DR-372

auto-cost command     P1R-344

auto-cut-through command     MR-18

autodetect encapsulation command     DR-32

autohangup command     DR-34

automatic protocol startup

ARA     DR-35

PPP     DR-35

SLIP     DR-35

automatic receiver polarity reversal     IR-19

autonomous bridging

ciscoBus II, enabling     B1R-26

autonomous switching

SRB, enabling     B1R-193

autonomous systems

BGP providing paths to remote networks     P1R-609

boundary router     P1R-345, P1R-660

auto-polarity command     IR-19

autoselect command     DR-35

auto-summary (BGP) command     P1R-484

auto-summary (RIP) command     P1R-290

auto-summary command, IP Enhanced IGRP     P1R-404

AUX port, asynchronous interface     DR-24

B

B8ZS line coding     IR-455

backup command     DR-37

backup delay command     DR-39

backup interface command     DR-40

backup interface dialer command     DR-41

backup load command     DR-43

backup server table, IPX Enhanced IGRP     P2R-259

BACP (Bandwidth Allocation Control Protocol), enabling     DR-455

bandwidth

allocation     QR-85

field name description     XR-244

setting     IR-20

setting thresholds     XR-125

bandwidth (policy map) command     QR-4

bandwidth command     IR-20

bandwidth on demand, DDR     DR-156

banner exec command     FR-2

banner incoming command     FR-4

banner login command     FR-5

banner motd command     FR-7

banners

disabling on a line     FR-2, FR-5, FR-29

enabling on a line     FR-2, FR-5, FR-29

EXEC, displaying     FR-2

for reverse Telnet lines     FR-4

incoming message     FR-4

line number     FR-34

login     FR-5

MOTD     FR-7

using to announce system shutdown     FR-7

See also messages

Banyan VINES

See VINES

baud rates

receive, changing for session     FR-104

receive, configuring for a line     DR-501, DR-762

transmit, configuring for a line     DR-762, DR-843

X.3 PAD parameters     DR-916

See also line speed

Bc, committed burst size, Frame Relay     WR-208

Be, excess burst size, Frame Relay     WR-210

beacon command     P1R-878

BECN (backward explicit congestion notification)

bits     WR-308

message generation     QR-207

BFE (Blacker Front End)

address translation     WR-347, WR-383

Blacker Emergency Mode

entering     WR-347

leaving     WR-347

local marker facilities (table)     WR-493

mapping algorithm     WR-383

remote-red setting     WR-446

X.25 encapsulation     WR-355

bfe command     WR-347

BGP (Border Gateway Control)

administrative distance, setting     P1R-510

aggregate address, configuring     P1R-482

backdoor routes, indicating     P1R-564

community, matching     P1R-529

community attribute. sending to a neighbor     P1R-555

community list, creating     P1R-519

confederation     P1R-492

enabling     P1R-566

IP access (example)     DR-928

local preference value, setting     P1R-684

metric type     P1R-577

neighbor connections     XR-187

networks, specifying     P1R-563

regular expression filtering     DR-922

route dampening

configuring factors     P1R-495

dampening information, clearing     P1R-504

enabling     P1R-495

flap statistics, clearing     P1R-505

suppressed routes, unsuppressing     P1R-504

route filtering     P1R-516, P1R-538

route map     P1R-662

route reflector, configuring     P1R-490, P1R-491, P1R-553

route summarization     P1R-290, P1R-404, P1R-484

routing domain confederation     P1R-492

sessions, resetting immediately     P1R-499

soft reconfiguration     P1R-502, P1R-557

synchronization with IGPs     P1R-609

TCP MD5 authentication     P1R-543

timers, adjusting     P1R-612

bgp always-compare-med command     P1R-485

bgp bestpath med-confed command     P1R-487

bgp bestpath missing-as-worst command     P1R-489

bgp client-to-client reflection command     P1R-490

bgp cluster-id command     P1R-491

bgp confederation identifier command     P1R-492

bgp confederation peers command     P1R-494

bgp dampening command     P1R-495

bgp default local-preference command     P1R-497

bgp fast-external-fallover command     P1R-499

bgp log-neighbor-changes command     P1R-499

bgp-policy command     QR-8

bgp scan-time command     XR-7

bidirectional mode

Frame Relay end-to-end keepalive     WR-226

bit settings     XR-9

Blacker Emergency Mode     WR-398

address translation     WR-347

entering     WR-347

leaving     WR-347

boot bootldr command     FR-286

boot bootstrap command     FR-288

boot buffersize command     FR-215

boot command     FR-282

boot config command     FR-216

BOOT environment variable

rearranging order of entries     FR-292

specifying     FR-290, FR-293

boot field

bit settings, listing     FR-300

default values, changing     FR-295, FR-297

bootfile     P1R-96

bootfile command     P1R-96

boot host command     FR-218

booting

from Flash     FR-290

checksum values, MOP     FR-175

from network server     FR-282

(example)     FR-284

manually from Flash     FR-282

system software, configuration register     FR-295, FR-297

BOOTLDR environment variable, specifying     FR-286

boot network command     FR-220

BOOTP (Bootstrap Protocol), forwarding agent     P1R-26, P1R-32

boot register     FR-295, FR-297

bootstrap image

backing up on a server     FR-174

secondary     FR-288

boot system command     FR-290, FR-291

Break key     FR-293

bridge acquire command     B1R-10

bridge address command     B1R-11

bridge bitswap-layer3-addresses command     B1R-13

bridge bridge command     B1R-14

bridge circuit-group pause command     B1R-16

bridge circuit-group source-based command     B1R-17

bridge cmf command     B1R-18

bridge crb command     B1R-19, P1R-15

bridge domain command     B1R-20

bridge forwarding database entry classes, viewing     B1R-67

bridge forward-time command     B1R-22

bridge-group aging-time command     B1R-25

bridge-group cbus-bridging command     B1R-26

bridge-group circuit-group command     B1R-28

bridge group command     P1R-15

bridge-group command     B1R-23

bridge-group input-address-list command     B1R-29

bridge-group input-lat-service-deny command     B1R-30

bridge-group input-lat-service-permit command     B1R-31

bridge-group input-lsap-list command     B1R-32

bridge-group input-pattern-list command     B1R-33

bridge-group input-type-list command     B1R-34

bridge-group lat-compression command     B1R-35

bridge-group output-address-list command     B1R-36

bridge-group output-lat-service-deny command     B1R-37

bridge-group output-lat-service-permit command     B1R-38

bridge-group output-lsap-list command     B1R-39

bridge-group output-pattern-list command     B1R-41

bridge-group output-type-list command     B1R-42

bridge-group path-cost command     B1R-43

bridge-group priority command     B1R-44

bridge groups

interface assignment

bridge group numbers     B1R-23

circuit groups     B1R-28

source MAC address     B1R-17

bridge-group spanning-disabled command     B1R-46

bridge-group sse command     B1R-48

bridge hello-time command     B1R-50

bridge irb command     B1R-51

bridge lat-service-filtering command     B1R-52

bridge max-age command     B1R-53

bridge multicast-source command     B1R-54

bridge priority command     B1R-55

bridge protocol command     B1R-56

bridge protocol data units

intervals between hello     B1R-50

bridge protocol ibm command     B1R-94

bridge route command     B1R-58

bridges

global information, displaying     B1R-153

logical configuration, displaying     B1R-154

bridging X.25     WR-422

broadcast command     WR-48

broadcasts

IP

and transparent bridging spanning-tree protocol     P1R-28

flooding     P1R-28

IPX

forwarding     P2R-282

type 20 packets     P2R-407, P2R-408, P2R-409

VINES

forwarding     P3R-78

serverless networks     P3R-87

zero-hop     P3R-87

XNS

all-nets     P3R-362

flooding     P3R-362, P3R-363, P3R-364

in 3Com environment     P3R-363

forwarding     P3R-365, P3R-368

BSC (Binary Synchronous Communications)

character set, configuring     B1R-337

contention interfaces

addresses, specifying     B1R-338

idle timeout, configuring     B1R-339

device retries     B1R-344

link, secondary end     B1R-345

polling cycle interval     B1R-341

poll-list cycles

number, specifying     B1R-346

poll timeout     B1R-342

primary end of link     B1R-343

specific polls, configuring     B1R-347

bsc char-set command     B1R-337

bsc-char-set command     B1R-337

bsc contention command     B1R-338

bsc dial-contention command     B1R-339

bsc host-timeout command     B1R-340

bsc pause command     B1R-341

bsc poll-timeout command     B1R-342

bsc primary command     B1R-343

bsc retries command     B1R-344

bsc secondary command     B1R-345

bsc servlim command     B1R-346

bsc spec-poll command     B1R-347

BSTUN (Block Serial Tunneling)

custom queueing

BSTUN header     B1R-367

TCP port     B1R-368

Frame Relay     B1R-494

frames, forwarding     B1R-357

frames, specifying     B1R-355

group, specifying     B1R-348

interface, enabling     B1R-358

peers, specifying     B1R-351

protocol group, specifying     B1R-352

bstun group command     B1R-348

bstun keepalive-count command     B1R-349

bstun lisnsap command     B1R-350

bstun peer-name command     B1R-351

bstun protocol-group command     B1R-352

bstun route (Frame Relay) command     B1R-357

bstun route command     B1R-355, B1R-357

buckets-of-history-kept command     FR-352

buffers

character, for terminal sessions     FR-61, FR-64

command history

changing for session     FR-41

setting for a line     FR-17, FR-19

configuration file, changing size     FR-215

interface buffer pool tuning     FR-672

management parameters     FR-671, FR-673

message logging to internal     FR-554

public buffer pool tuning     FR-672

receive configuration (example)     WR-38

size, setting     FR-671, FR-673

statistics, displaying     FR-725

transmit configuration (example)     WR-43

XRemote, size of     DR-893

buffers command     FR-671

buffers huge size command     FR-673

bump command     QR-9

bumping rules, configuring     QR-9

bundle command     QR-12

burned-in address     WR-370

burst size bytes, requested     XR-229

busy-message command     DR-44

busyout forced command     MR-19

busyout monitor interface command     MR-20

busyout-seize command     MR-22

BVI (Bridge Group Virtual Interface), configuring     B1R-66

C

cable arp command     MR-23

cable channel-change command     MR-24

cable downstream annex command     MR-26

cable downstream frequency command     MR-28

cable downstream if-output command     MR-29

cable downstream interleave-depth command     MR-30

cable downstream modulation command     MR-31

cable insertion-interval command     MR-39

cable interface configuration commands

cable arp     MR-23

cable channel-change     MR-24

cable downstream annex     MR-26

cable downstream frequency     MR-28

cable downstream if-output     MR-29

cable downstream interleave-depth     MR-30

cable downstream modulation     MR-31

cable insertion-interval     MR-39

cable ip-broadcast-echo     MR-42

cable ip-multicast-echo     MR-41

cable-modem compliant bridge     MR-112

cable-modem downstream saved channel     MR-113

cable-modem fast-search     MR-115

cable-modem upstream preamble qpsk     MR-116

cable proxy-arp     MR-54

cable spectrum-group frequency     MR-67

cable upstream fec     MR-93

cable upstream frequency     MR-95

cable upstream power-level     MR-104

cable upstream scramble     MR-109

cable upstream shutdown     MR-111

cable ip-broadcast-echo command     MR-42

cable ip-multicast-echo command     MR-41

cable length     IR-28

cablelength command     IR-28

cablelength long command     IR-29

cablelength short command     IR-32

cable-modem upstream preamble qpsk command     MR-116

cable privacy kek grace-time command     MR-50

cable privacy tek grace-time command     MR-52

cable proxy-arp command     MR-54

cable spectrum-group command     MR-63

cable spectrum-group frequency command     MR-67

cable upstream fec command     MR-93

cable upstream freq-adj averaging command     MR-96

cable upstream frequency command     MR-95

cable upstream power-adjust command     MR-102

cable upstream power-level command     MR-104

cable upstream scramble command     MR-109

cable upstream shutdown command     MR-111

cache command     XR-8

ca-identity mode, enabling     SR-415

calendar set command     FR-674

call application voice command     MR-118

call application voice language command     MR-120

call application voice load command     MR-123

call application voice pin-len command     MR-124

call application voice redirect-number command     MR-127

call application voice retry-count command     MR-130

call application voice set-location command     MR-133

call application voice uid-len command     MR-136

call application voice warning-time command     MR-139

callback

ARA     DR-13

ARA protocol chat scripts     DR-506

dialer interface, non-DTR     DR-451

enabling     DR-129, DR-519

EXEC chat scripts     DR-508

forced wait period

configuring     DR-49

PPP client     DR-451, DR-452

PPP server     DR-451

router acceptance, enabling     DR-119

secure, configuring     DR-127

callback forced-wait command     DR-49

called-number (dial-peer) command     MR-143

called-number command     DR-50

call progress tone, monitoring     DR-535

call progress tone country command     DR-47

calls

caller ID screening     DR-132

configuring     DR-248

platform support     DR-248

country-specific defaults, configuring     MR-386

disconnect ISDN     DR-254

disconnect notification. configuring     MR-390

incoming channel-associated signalling, configuring     DR-53

incoming reject count     DR-707

ISDN three-way conference     DR-252

limit overflow     DR-344

monitoring total E1     DR-548

monitoring total on T1     DR-552

NSF on ISDN PRI, configuring outgoing voice     DR-263

outgoing information transfer capability, configuring     DR-264

reject type of, configuring     DR-52

voice and data call priority, configuring     DR-286

call switching modules

modem response time     DR-403

monitoring     DR-550, DR-554

call-type cas command     DR-53

call-type command     DR-52

call-waiting command     MR-142

CAP (Columbia AppleTalk Package), compatibility     P2R-61

cap-list vfc command     MR-145

CAR (committed access rate)

access lists     QR-2

displaying     QR-160

interface statistics (table)     QR-161

policies, configuring     QR-142

card type command     MR-146

Carriage Return

See CR

carrier wait time

DDR

interface, disabling     DR-190

map class     DR-191

CAs (certification authority)

authenticating     SR-406

CEP support     SR-428

declaring     SR-415, SR-427

enrolling     SR-412

identity, deleting     SR-415

LDAP, support     SR-428

locations, specifying     SR-427

public keys     SR-406

URLs, specifying     SR-427

See also Certification Authority Interoperability

cas-custom command     DR-54

cas-group (e1 controller) command     DR-61

cas-group (t1 controller) command     DR-66

cautions

access lists     SR-254, SR-306, SR-315

access-profile command

replace command form (caution)     SR-27

using per-user configuration (caution)     SR-27

arap authentication command

using list-names (caution)     SR-29

Cisco 7200 series router     SR-293

crypto key zeroize dss command     SR-293

DSS keys     SR-292

enable password command

using encryption-type (caution)     SR-472

enable secret command

using encryption-type (caution)     SR-474

Java blocking     SR-189

key config-key command

unrecoverable DES key (caution)     SR-137

login authentication command

using list-names (caution)     SR-35

nasi authentication command

using list-names (caution)     SR-37

ppp authentication command

using list-names (caution)     SR-40

service password-encryption command

security level (caution)     SR-482

Cayman tunneling, AppleTalk     IR-476

CBAC (Context-based Access Control)

alert messages, enabling     SR-178

application-layer protocols, configuring     SR-189

audit trail messages

enabling     SR-179

(example)     SR-178

configurations, viewing     SR-205

denial-of-service attacks detection     SR-199

disabling     SR-204

fragment inspection, configuring     SR-191

H.323 inspection, configuring     SR-189

half-open sessions

deleting, high threshold     SR-182, SR-193

deleting, low threshold     SR-184, SR-195

description     SR-182

TCP threshold     SR-199

inspection rules

applying     SR-181

applying (example)     SR-181

defining     SR-186

removing     SR-181

viewing     SR-205

Java

blocking     SR-187

blocking (caution)     SR-189

inspection, configuring     SR-189

RPC inspection, configuring     SR-190

session information

(example)     SR-205

viewing     SR-205

SMTP inspection, configuring     SR-190

TCP inspection, configuring     SR-189

timeouts

DNS idle, specifying     SR-180

FIN-exchange, specifying     SR-197

overriding     SR-190

synwait, specifying     SR-201

TCP idle, specifying     SR-198

UDP idle, specifying     SR-202

UDP inspection, configuring     SR-189

cbr     MR-148

CBR (constant bit rate) interface

clocking     WR-101

clocking information     WR-174

configure cable length     WR-60

configure connection attributes     WR-54

configure port     WR-97

configure transmit clock source     WR-57

CBWFQ (class-based WFQ)

class queue packet limit, configuring     QR-115

policy maps

See policy maps

priority queue, enabling     QR-97

CCL scripts, modified and unmodified together     DR-36

ccs connect command     MR-150

cd command     FR-168

CDP (Cisco Discovery Protocol)

enabling and disabling for routing device     FR-357

global information, displaying     FR-408

interface status information, displaying     FR-412

neighbor

information, displaying     FR-414

table, clearing     FR-360

neighbor device, displaying information     FR-410

traffic counters, clearing     FR-359

traffic information, displaying     FR-417

transmission hold time, configuring     FR-356

transmission timer, setting     FR-358

Version-2, enabling     FR-354

cdp advertise-v2 command     FR-354

cdp enable command     FR-355

cdp holdtime command     FR-356

cdp run command     FR-357

cdp timer command     FR-358

CEF (Cisco Express Forwarding)

interface, enabling     XR-67

policy routing     P1R-678

CEP (certificate enrollment protocol), specifying     SR-428

certificate chain configuration mode, enabling     SR-408

certificate command     SR-402

certificates

accepting     SR-404

adding     SR-402

deleting     SR-402, SR-408

requesting     SR-412

requests

resending, number of times     SR-423

resending, wait period     SR-425

retrieving     SR-410

revoking     SR-412

storing     SR-410

viewing     SR-429

Certification Authority Interoperability

CA authentication     SR-406

CEP, specifying     SR-428

challenge password     SR-412

commands     SR-401

LDAP support, specifying     SR-428

NVRAM memory usage     SR-410

See also CAs; certificates; CRLs; RSA keys

ces aal1 clock command     WR-51

ces aal1 service command     WR-52

ces cell-loss-integration-period command     MR-151

ces circuit command     WR-54

ces clockmode synchronous command     MR-153

ces connect command     MR-154

ces dsx1 clock source command     WR-57

ces dsx1 framing command     WR-58

ces dsx1 lbo command     WR-60

ces dsx1 linecode command     WR-61

ces dsx1 loopback command     WR-63

ces dsx1 signalmode robbedbit command     WR-64

ces initial-delay command     MR-156

ces max-buf-size command     MR-158

ces partial-fill command     MR-160

ces pvc command     WR-66

ces service command     MR-162

CGMP (Cisco Group Management Protocol)

clearing     P1R-720

enabling     P1R-730

proxy     P1R-730

channel-associated signalling (CAS)     WR-55

channel-group (Fast EtherChannel) command     IR-34

channel-group command     DR-71

channelized E1

channel groups     DR-71

controller statistics     DR-111, DR-545

frame type     DR-211

loopback, local interface     DR-362

serial interface     DR-221

channelized T1

channel groups     DR-71

frame type     DR-211

loopback     IR-184, IR-185

local interface     DR-362

local on entire line     DR-361

serial interface     DR-221

channelized T3     IR-79, IR-459

Channelized T3 Interface Processor (CT3IP)

See T3

channel-protocol command     B2R-198

channels

ATM maximum configuration (example)     WR-21

switched 56K data, monitoring     DR-550, DR-554

CHAP (Challenge Handshake Authentication Protocol), DDR     DR-161

character data bits

changing for session     FR-89

setting for line     FR-57

character mapping

configuring     DR-792

displaying TN3270     DR-735

character padding

changing for session     FR-101

configuring for line     FR-78

character set

7-bit for standard U.S. characters     FR-105

8-bit

See 8-bit character set

character width

EXEC process

changing for session     FR-94

configuring for a line     FR-67

defining default     FR-58

special characters

changing for session     FR-105

configuring for line     FR-84

defining default     FR-59

chat-script command     DR-73, DR-927

chat scripts

ARA protocol-callback     DR-506

create     DR-73

DDR     DR-512

escape sequences (table)     DR-74

(example)     DR-927

EXEC callback     DR-508

expect-send pairs (table)     DR-75

naming conventions     DR-73, DR-512

physical terminal lines     DR-504, DR-506, DR-508

SLIP and PPP backward compatibility     DR-520

starting

because of incoming connections     DR-510

from the EXEC     DR-767

manually for a line     DR-767

on line activation     DR-504

on line reset     DR-514

on system startup     DR-516

checksums

AppleTalk     P2R-33

ISO CLNS     P3R-198

system images, verifying     FR-175

cidr-only     XR-187

CIP (Channel Interface Processor)

data rate

PCA, configuring     B2R-198

CIPX, IPX compression on PPP links     DR-236

circuit emulation services (CES)

cable length     WR-60

channel-associated signalling (CAS)     WR-55

clocking     WR-51

clocking information     WR-174

framing     WR-58

hard PVC     WR-66

line code format     WR-61

loopback     WR-63

on-hook detection     WR-55

robbed bit signalling     WR-64

structured services     WR-55

unstructured services     WR-55

Cisco 4500 series

ATM loopback, OC-3, DS3, E3 interfaces     WR-99

ciscoBus II

autonomous bridging, enabling     B1R-26

Cisco Easy IP address negotiation     DR-224

Cisco-supported RFCs (table)     FR-835

class (map-list configuration) command

Frame Relay     WR-198

class (MPLS) command     XR-9

class (policy map) command     QR-14

class (virtual circuit configuration) command

Frame Relay map class DLCI     WR-200

class-bundle command     QR-17

class configuration commands

codec preference     MR-184

class-default class     QR-25

class-int command     WR-68

class-map command     QR-19

class maps

configuring     QR-19

match criteria

access lists, configuring     QR-77

interface, configuring     QR-79, QR-81

protocols, configuring     QR-83

See also class policies; policy maps

class policies

bandwidth configuration     QR-4

configuring     QR-14

default class, configuring     QR-14

displaying information     QR-155, QR-179, QR-181

dynamic queues, configuring     QR-25

queue packet limit, configuring     QR-115

See also class maps; policy maps

class-vc command     WR-70

CLAW (Common Link Access Workstation)

backup groups

displaying     B2R-272

IP datagram, configuring     B2R-256

IP host backup group, configuring     B2R-256, B2R-259

packing connections, displaying     B2R-273

packing names, displaying     B2R-273

packing statistics, displaying     B2R-275

claw (backup) command     B2R-259

claw command     B2R-256

clear access-template command     SR-145

clear adjacency command     XR-11

clear alps circuits command     B1R-569

clear alps counters command     B1R-570

clear appletalk arp command     P2R-103

clear appletalk neighbor command     P2R-104

clear appletalk route command     P2R-105

clear appletalk traffic command     P2R-106

clear arp-cache command     P1R-8

clear atm vc command     XR-12

clear bridge command     B1R-61

clear bridge multicast command     B1R-62

clear cdp counters command     FR-359

clear cdp table command     FR-360

clear cef linecard command     XR-13

clear clns cache command     P3R-186

clear clns es-neighbors command     P3R-187

clear clns is-neighbors command     P3R-188

clear clns neighbors command     P3R-189

clear clns route command     P3R-190

clear controller command     DR-77

clear controller lex command     IR-37

clear cot summary command     DR-78

clear counters (async) command     DR-79

clear counters command     IR-39

clear counters line command     DR-81

clear crypto connection command     SR-258

clear crypto isakmp command     SR-438

clear crypto sa command     SR-354

clear csm-statistics command     MR-167, MR-168

clear dbconn connection command     B2R-148

clear decnet accounting command     P3R-116

clear decnet counters command     P3R-118

clear dialer command     DR-83

clear dialer dnis command     DR-84

clear dlsw circuit command     B1R-250

clear dlsw reachability command     B1R-251

clear dlsw statistics command     B1R-252

clear drip command     B1R-206, B1R-212

clear dsip tracing command     FR-812

clear entry command     DR-87

clear frame-relay-inarp command     WR-202

clear host command     P1R-9

clear hub command     IR-42

clear hub counters command     IR-43

clearing counters     IR-39

clear interface command     DR-88, IR-44

clear interface fastethernet command     IR-47

clear interface serial command     IR-49

clear interface virtual-access command     DR-90

clear ip audit configuration command     SR-210

clear ip audit statistics command     SR-211

clear ip auth-proxy cache command     SR-230

clear ip bgp command     P1R-502

clear ip bgp dampening command     P1R-504

clear ip bgp flap-statistics command     P1R-505

clear ip bgp peer-group command     P1R-506, P1R-507

clear ip cef command     XR-14

clear ip cef prefix-statistics command     XR-14

clear ip cgmp command     P1R-720

clear ip dhcp binding     P1R-97

clear ip dhcp binding command     P1R-97

clear ip dhcp conflict     P1R-98

clear ip dhcp conflict command     P1R-98

clear ip dhcp server statistics     P1R-99

clear ip dhcp server statistics command     P1R-99

clear ip dvmrp route command     P1R-721

clear ip eigrp neighbors command     P1R-405, P1R-721

clear ip flow stats command     XR-15

clear ip igmp group command     P1R-722

clear ip mds forwarding command     XR-16

clear ip mobile binding command     P1R-240

clear ip mobile secure command     P1R-241

clear ip mobile traffic command     P1R-243

clear ip mobile visitor command     P1R-245

clear ip mrm status-report command     P1R-880

clear ip mroute command     P1R-723, XR-17

clear ip msdp peer command     P1R-828

clear ip msdp sa-cache command     P1R-829

clear ip msdp statistics command     P1R-830

clear ip nat translation command     P1R-10

clear ip nhrp command     P1R-12

clear ip pgm router command     P1R-860

clear ip pim auto-rp command     P1R-724

clear ip pim interface count command     XR-18

clear ip route command     P1R-13

clear ip route download     DR-91

clear ip route download command     DR-91

clear ip route vrf command     XR-19

clear ip rtp header-compression command     P1R-725

clear ip sdr command     P1R-726

clear ip trigger-authentication command     SR-31

clear ipx accounting command     P2R-220

clear ipx cache command     P2R-222

clear ipx nhrp command     P2R-223

clear ipx nlsp neighbors command     P2R-224

clear ipx route command     P2R-226

clear ipx traffic command     P2R-228

clear kerberos creds command     SR-126

clear lane le-arp command     XR-20

clear lane server command     XR-22

clear line command     DR-92

clear logging command     FR-536

clear modem command     DR-93

clear modem counters command     DR-95

clear modempool-counters command     DR-97

clear mpoa client cache command     XR-24

clear mpoa server cache command     XR-25

clear ncia circuit command     B1R-514

clear ncia client command     B1R-515

clear ncia client registered command     B1R-516

clear netbios-cache command     B1R-95

clear resource-pool command     DR-99

clear rif-cache command     B1R-96

clear rlm group command     DR-101

clear service-module serial command     IR-50

clear smrp mcache command     P2R-108

clear snapshot quiet-time command     DR-103

clear source-bridge command     B1R-97

clear sse command     B1R-98

clear tarp counters command     P3R-191

clear tarp ldb-table command     P3R-192

clear tarp tid-table command     P3R-193

clear tcp command     FR-9

clear txconn connection command     B2R-150

clear txconn statistics command     B2R-151

clear txconn transaction command     B2R-149

clear vines cache command     P3R-20

clear vines ipc command     P3R-21

clear vines neighbor command     P3R-22

clear vines route command     P3R-23

clear vines traffic command     P3R-24

clear vlan statistics command     B1R-64

clear voice port command     MR-171

clear vpdn history failure command     DR-104

clear vpdn tunnel command     DR-105

clear x25 command     WR-348

clear x25-vc command

See clear x25 command

clear xot command     WR-351

CLI (command-line interface), privilege levels     FR-8

client-atm-address command     XR-26

client-atm-address name command     XR-26

client-identifier     P1R-100

client-identifier command     P1R-100

client ip command     B2R-306

client ip lu command     B2R-308

client ip pool command     B2R-310

client lu maximum command     B2R-312

client-name     P1R-101

client-name command     P1R-101

CLNS

See ISO CLNS

clns access-group command     P3R-194

clns adjacency-filter command     P3R-196

clns checksum command     P3R-198

clns cluster-alias command     P3R-199

clns configuration-time command     P3R-200

clns congestion-threshold command     P3R-201

clns dec-compatible command     P3R-202

clns enable command     P3R-203

clns erpdu-interval command     P3R-204

clns esct-time command     P3R-205

clns es-neighbor command     P3R-206

clns filter-expr command     P3R-207

clns filter-set command     P3R-209

clns holding-time command     P3R-211

clns host command     P3R-212

clns is-neighbor command     P3R-214

clns mtu command     P3R-215

clns net (global) command     P3R-217

clns net (interface) command     P3R-218

clns packet-lifetime command     P3R-219

clns rdpdu-interval command     P3R-220

clns route (create) command     P3R-221

clns route (enter) command     P3R-223

clns route-cache command     P3R-224

clns route default command     P3R-225

clns route discard command     P3R-226

clns router isis command     P3R-228

clns router iso-igrp command     P3R-230

clns routing command     P3R-231

clns security-passthrough command     P3R-232

clns send-erpdu command     P3R-233

clns send-rdpdu command     P3R-234

clns split-horizon command     P3R-235

clns template-alias command     P3R-237

clns want-erpdu command     P3R-239

clock transmit (example)     WR-9

clock calendar-valid command     FR-675

clock rate (examples)     IR-52

clock rate command     IR-51

clock rate line command     MR-172

clock rate network-clock command     MR-173

clock read-calendar command     FR-676

clock set command     FR-677

clock signal, inverting     IR-160

clock source

T1     IR-450

T3     IR-58

clock source (Cisco AS5200) command     IR-55

clock source (Cisco MC3810) command     IR-62

clock source (controller) command     IR-56

clock source (CT3IP) command     IR-58

clock source (interface) command     IR-60

clock source command     DR-106, IR-53  to IR-54

clock source line command     DR-106

clock summer-time command     FR-678

clock ticks, IPX     P2R-273

clock timezone command     FR-680

clock update-calendar command     FR-681

cluster aliases, ISO CLNS     P3R-199

CMCC (Cisco Mainframe Channel Connection) adapters

channel interfaces

hardware, displaying     B2R-249

physical, monitoring     B2R-254

shutting down     B2R-253

specifying     B2R-203

statistics, displaying     B2R-235

channel statistics, displaying     B2R-230

CLAW, configuring     B2R-256, B2R-259

CMPC

configuring     B2R-278, B2R-299

subchannels, displaying     B2R-285

transmission groups, displaying     B2R-291

CMPC+

configuring     B2R-278, B2R-301

subchannels, displaying     B2R-285

transmission groups, displaying     B2R-291

core dump, enabling     B2R-201

CSNA

configuring     B2R-280

subchannels, displaying     B2R-287

data rate

parallel channel interfaces, configuring     B2R-198

DLUR, configuring     B2R-314

DLUS backup, configuring     B2R-316

ICMP stack, displaying     B2R-211

internal adapters

configuring     B2R-196

naming     B2R-208

VRN, configuring     B2R-406

internal LANs

configuring     B2R-205

displaying     B2R-217

IP host backup

offload devices, configuring     B2R-267

paths, configuring     B2R-270

IP stack, displaying     B2R-213

LLC2 sessions

displaying     B2R-219

maximum, displaying     B2R-228

maximum, specifying     B2R-207

SAPs, displaying     B2R-210

NN server

TN3270 server, configuring     B2R-344

SAPs

LLC2 sessions, displaying     B2R-210

sessions

TN3270 server, configuring     B2R-339

TCP/IP offload, configuring     B2R-262, B2R-265

TCP connections, displaying     B2R-240

TCP stack, displaying     B2R-243

TN3270 server, configuring     B2R-303  to B2R-407

UDP listener sockets, displaying     B2R-246

UDP stack, displaying     B2R-247

CMNS (Connection Mode Network Service)

enabling     WR-352

local X.25 routing on nonserial media     WR-352

traffic statistics, displaying     WR-370

X.25 routing     WR-455

cmns enable command     WR-352

CMPC (Cisco Multipath Channel)

LLC connections, configuring     B2R-299

subchannels

configuring     B2R-278

displaying     B2R-285

transmission groups

configuring     B2R-299

displaying     B2R-291

CMPC+ (Cisco Multipath Channel+)

subchannels

configuring     B2R-278

displaying     B2R-285

TG connection manager, displaying     B2R-283

transmission groups

configuring     B2R-301

displaying     B2R-291

cmpc command     B2R-278

cmt connect command     IR-64

cmt disconnect command     IR-66

codec (Cisco 7200 series) command     MR-174

codec (voice-port configuration) command     MR-180

codec command     MR-176

codec complexity command     MR-182

codec preference command     MR-184

comfort-noise command     MR-185

command     FR-196

command alias

See aliases

command history

buffer size

changing for session     FR-41

setting for a line     FR-17, FR-19

displaying previous commands     FR-32

recalling commands     FR-32

command modes

exiting     FR-11

global configuration     FR-222

privileged EXEC     FR-8

commands

abbreviating     FR-3

EXEC

show ip bgp neighbors     P1R-598

history

See command history

mapping old to new (table)     FR-214, FR-234, FR-261, FR-321

router configuration

bgp bestpath med-confed     P1R-487

neighbor shutdown     P1R-556

command syntax help     FR-15

community access string, setting for SNMP     FR-472

community-list     XR-187

compand-type command     MR-186

compress command     IR-68

compressed system images     FR-292

compressing configuration files     FR-225

compression

configuring     IR-68

HDLC encapsulation     IR-69

LABP encapsulation     IR-69

LAPB     IR-70

LAT packets , configuring     B1R-35

MPPC ignore-pfc option     IR-69

packet-by-packet, X.25     WR-419, WR-422

PPP encapsulation     IR-69

RAND compression algorithm     IR-70

service adapter     IR-68

statistics, displaying     IR-240

TCP packet header     WR-426

X.25 packet-by-packet     B1R-87, B1R-488

compress mppc command     IR-73

compress predictor command

See compress command

concentrator port, enabling     IR-199

concurrent routing and bridging, enabling     B1R-19

conditional default origination, IS-IS     P1R-437

condition command     MR-187

CONFIG_FILE environment variable, specifying     FR-216

config-isakmp command mode, enabling     SR-445

config-register command     FR-295

configuration files

active, displaying     FR-230

buffer, changing size     FR-215

copying to an rcp server     FR-173,  FR-174, FR-219, FR-221

host

default filename     FR-227

loading from a server     FR-218, FR-227

network

default filename     FR-227

loading from a server     FR-227

network server, storing     FR-175

NVRAM, displaying file     FR-231

storing

in CONFIG_FILE environment variable     FR-175, FR-176

in NVRAM     FR-175, FR-176

Configuration Management, FDDI MAC-level connection     IR-330

configuration mode, exiting     FR-10

configuration register, streamlined setup facility     FR-45

configure command     FR-222

configure network command

See copy command

configure overwrite-network command

See copy command

configuring

advertisement     XR-4

translation     XR-4

confreg command     FR-297

congestion threshold

DECnet     P3R-130

ISO CLNS     P3R-201

connect (global) command     MR-191

connect command     DR-108, DR-315, DR-772

connection command     MR-194

connections

display open     DR-876, FR-119

incoming, definition     FR-4

LAT     DR-315  to DR-316

limit simultaneous     DR-343

mobile remote node     DR-842

naming     FR-31

NASI client     DR-239

NetBEUI     DR-693

enabling     DR-415

notification of pending output     DR-491, FR-77

PPP     DR-428

queued host-initiated, clearing entries     DR-87

refuse full duplex     DR-776,  FR-111

reverse     DR-382, DR-393

rlogin     DR-494, DR-496, DR-497, DR-770  to DR-773

SLIP     DR-757

status of open     DR-721

switching between     DR-490, DR-492

TCP and BGP     XR-187

Telnet     DR-770  to DR-773

configuring line     DR-777

TN3270     DR-789

X.3 PAD     DR-886

XRemote     DR-888, DR-892, DR-896

connect voice command     MR-193

console

displaying debug messages     FR-99

logging messages     FR-555

console port, configuring     DR-346

constrained multicast flooding, enabling     B1R-18

multicast state information

clearing     B1R-62

displaying     B1R-73

contact string, setting for SNMP     FR-474

continue command     FR-299

controller command     DR-111

controller configuration commands

ccs connect     MR-150

loop-detect     MR-323

mode (Voice over ATM)     MR-349

mode ccs     MR-351

pri-group nec-fusion     MR-411

shutdown (DS 1 link)     MR-613

tdm-group     MR-634

voice-group     MR-701

controllers

E1

analog R2 signalling, configuring     DR-63

calls, monitoring     DR-548

call signals, configuring     DR-63

channel-associated signalling, configuring     DR-61

clock source, configuring     DR-106

configuring     DR-111

loopback, configuring     DR-360

time slots, configuring     DR-71

T1

channelized time slots, configuring     DR-66

configuring     DR-111

monitoring calls     DR-552

R1 channel-associated signalling, configuring     DR-66

robbed-bit signalling, configuring     DR-66

time slots, configuring     DR-71

controller t1 command     IR-77

controller t3 command     IR-78

copy     FR-209

copy bootflash rcp command     FR-181

copy command     FR-170

copy erase flash command

See erase flash command

copy flash lex command     IR-81

copy flash rcp command     FR-179, FR-180

copy flash vfc command     MR-199

copy modem command     DR-113

copy mop flash command     FR-175

copy rcp flash command

(example)     FR-177

copy rcp running-config command     FR-181

copy rcp startup-config command     FR-181

copy tftp flash command (example)     FR-178

copy tftp lex command     IR-82

copy tftp vfc command     MR-200

copy verify bootflash command

See verify command

copy verify flash command

See verify command

copy xmodem command     FR-239, FR-240

CoS (class of service) maps     XR-327

cos-map function     XR-9, XR-320

cost

DECnet, assigning     P3R-133

modifying default for transparent bridging     B1R-43

COT (Continuity Test), monitoring     DR-556, DR-560

counters

clearing     IR-39, IR-439

DECnet     P3R-118

TARP, clearing     P3R-191

CPA (Channel Port Adapter)

data rate

PCPA, configuring     B2R-198

microcode image

loading     FR-244

reloading     FR-249

CPP (Combinet Proprietary Protocol)

authentication negotiation     DR-117

enabling     DR-117

callback acceptance, configuring     DR-119

encapsulations     DR-201

half-bridging     DR-201

PPP support     DR-117

cpp authentication command     DR-117

cpp callback accept command     DR-119

cptone command     MR-201

CR     FR-825

CRC (cyclic redundancy check)

G.703/G.704     IR-84

setting     IR-83

crc4 command     IR-84

crc bits 5 command     IR-85

crc command     IR-83

crl optional command     SR-404

CRLs (certificate revocation lists)

certificates

accepting     SR-404

revoking     SR-411

checking     SR-404

downloading     SR-411

requesting     SR-411

retrieving     SR-410

storing     SR-410

See also CAs; certificates

cross-connect command     MR-205

crypto algorithm 40-bit-des command

See crypto cisco algorithm 40-bit-des command     SR-260

crypto algorithm des command

See crypto cisco algorithm des command     SR-261

crypto ca authenticate command     SR-406

crypto ca certificate chain command     SR-408

crypto ca certificate query command     SR-410

crypto ca crl request command     SR-411

crypto ca enroll command     SR-412

crypto ca identity command     SR-415

crypto card clear-latch command     SR-264

crypto card command     SR-262

crypto cisco algorithm 40-bit-des command     SR-266

crypto cisco algorithm des command     SR-268

crypto cisco connections command     SR-270

crypto cisco entities command     SR-272

crypto cisco key-timeout command     SR-274

crypto cisco pregen-dh-pairs command     SR-275

crypto clear-latch command

See crypto card clear-latch command     SR-277

crypto dynamic-map command     SR-356

crypto esa command

See crypto card command     SR-278

crypto gen-signature-keys command

See crypto key generate dss command     SR-279

crypto ipsec security-association lifetime command     SR-359

crypto ipsec transform-set command     SR-361

crypto isakmp enable command     SR-440

crypto isakmp identity command     SR-441

crypto isakmp key command     SR-443

crypto isakmp policy command     SR-445

crypto key-exchange command

See crypto key exchange dss command     SR-280

crypto key exchange dss command     SR-281

crypto key exchange dss passive command     SR-283

crypto key-exchange passive command

See crypto key exchange dss passive command     SR-285

crypto key generate dss command     SR-286

crypto key generate rsa (CA) command     SR-417

crypto key generate rsa (IKE) command     SR-447

crypto key pubkey-chain dss command     SR-289

crypto key pubkey-chain rsa command     SR-450

crypto key-timeout command

See crypto cisco key-timeout command     SR-291

crypto key zeroize dss command     SR-292

crypto key zeroize rsa command     SR-420

crypto map (CET global) command     SR-294

crypto map (CET interface) command     SR-297

crypto map (IPSec global) command     SR-365

crypto map (IPSec interface) command     SR-370

crypto map local-address command     SR-372

crypto pregen-dh-pairs command

See crypto cisco pregen-dh-pairs command     SR-298

crypto public-key command

See crypto key pubkey-chain dss command     SR-299

crypto sdu connections command

See crypto cisco connections command     SR-300

crypto sdu entities command

See crypto cisco entities command     SR-301

crypto transform configuration mode

enabling     SR-363

crypto zeroize command

See crypto key zeroize dss command     SR-302

CSAA

See SA Agent

CSNA (Cisco SNA)

subchannels

configuring     B2R-280

displaying     B2R-287

csna command     B2R-280

CSNP (complete sequence number PDU) packets     P2R-324

See also NLSP

CSU/DSU (channel service unit/digital service unit)

Cisco 2524 or Cisco 2525, resetting     IR-50

loopback     IR-182

Ctrl-C command     FR-33

Ctrl-Z command     FR-33

CUD (Call User Data)

interpreting calls with unknown     WR-399

placing in routing table     WR-396, WR-452

CUGs (closed user groups)

behavior, displaying     WR-374

CUG service, subscribing     WR-461

incoming and outgoing access     WR-461

local CUG to network CUG, mapping     WR-465

no-incoming and no-outgoing access     WR-465

custom queueing

configuration information, displaying     QR-190

establishing     QR-21

custom-queue-list command     QR-21

cut-through command     IR-85