Index: Cisco IOS Switching Services Configuration Guide, Release 2.1
Symbols A B C D E F G H I K L M N O P Q R S T U V W X
Symbols
A
- abbreviating commands
- context-sensitive help xxxi
- access lists
- creating XC-91
- IPX MLS
- configuring with, configuration (example) XC-166
- configuring without, configuration (example) XC-165
- overview XC-131
- restrictions XC-156
- accounting
- per VLAN XC-177
- Quality of Service (QoS) XC-177
- address
- Layer 2 MAC XC-6
- Layer 3 XC-6
- mapping XC-6
- addressing
- in VLANs XC-181
- AppleTalk
- AppleTalk over IEEE 802.10 in VLAN
- configuration (example) XC-211
- configuring on subinterface XC-210
- enabling for IEEE 802.10 encapsulation XC-210
- fast switching
- disabling XC-14
- enabling XC-11
- over encapsulating VLAN interfaces
- configuration (example) XC-199
- over IEEE 802.10 encapsulation XC-209
- Phase II in VLANs XC-180
- routing over VLAN subinterfaces XC-209
- subinterface
- customizing for VLAN XC-209
- TR-LANE support XC-231
- appletalk cable-range command XC-185, XC-210, XC-214
- appletalk route-cache command XC-13, XC-14
- appletalk routing eigrp command XC-185, XC-210, XC-214
- appletalk zone command XC-185, XC-210, XC-214
- APPN
- TR-LANE support XC-231
- Asynchronous Transfer Mode
- See ATM
- ATM
- configuring an interface XC-111
- forum XC-113
- interfaces XC-89
- LSRs XC-73
- MPLS subinterface XC-111
- subinterface XC-90, XC-91
- switches XC-90, XC-113
- virtual connections (VCs) XC-68
- with LSRs, configuring XC-88
- WRED XC-109
- atm-address command XC-236, XC-307, XC-313
- ATM LANE
- address
- wildcards in templates XC-234
- LECs XC-179
- LESs XC-179
- MAC address and ESI field XC-233
- NDIS-compliant LAN drivers XC-179
- ODI-compliant LAN drivers XC-179
- protocol definition XC-179
- ATM LAN emulation
- in VLANs XC-179
- atm lecs-address command XC-238
- atm lecs-address-default command XC-238
- atm pvc ilmi command XC-237
- atm pvc qsaal command XC-237
- automated scheduling XC-73
B
- backbone
- network XC-69
- provider XC-72
- services XC-67
- bandwidth
- allocation XC-73
- Banyan VINES
- in VLANs XC-180
- LANE support XC-231
- over ISL encapsulation XC-185
- configuration (example) XC-200
- TR-LANE support XC-231
- BGP PE to CE routing sessions
- configuring XC-86
- BGP routing sessions
- configuring XC-85
- bit settings XC-72
- bottlenecks XC-68
- bounded delay XC-73
- bridging domain XC-175
- broadcast
- control XC-177
- domain XC-175
- Layer 2 XC-176
- management
- in VLANs XC-181
- broadcast-and-unknown server (BUS) XC-230
- burst size XC-108
- BUS XC-221
C
- cache
- MLS XC-118
- cache imposition reply
- MPOA XC-300
- cache-imposition request
- MPOA XC-300
- candidate packet XC-120
- CAR
- as a CoS building block XC-88
- configuring XC-108
- for packet classification XC-73
- MLS
- restrictions XC-134
- rate policies XC-108, XC-110
- Catalyst 5000 series switches XC-305
- cautions
- usage in text xxv
- CCO
- accessing xxvi
- definition xxvi
- CE XC-68
- routing sessions XC-86, XC-87
- CEF XC-106, XC-108
- accounting XC-30
- benefits XC-21
- components
- adjacency tables XC-22
- Forwarding Information Base (FIB) XC-22
- configuration task list XC-27
- description XC-7, XC-21
- distributed tunnel switching
- configuring XC-30
- enabling XC-27
- load balancing
- per-destination, configuring XC-28
- per-destination, disabling XC-29
- per-packet, configuring XC-28
- NetFlow policy routing XC-46
- network accounting
- configuring XC-30
- operation modes
- central CEF mode XC-24
- distributed CEF mode XC-24
- sample network topology (figure) XC-22
- supported media XC-24
- CEF mode XC-24
- (figure) XC-24
- centralized service XC-67
- changing queue weight XC-92
- CIR XC-110
- Cisco 7200 series router XC-88
- Cisco 7500 series router XC-88
- Cisco Catalyst switches
- in VLANs XC-178
- Cisco Connection Online
- See CCO
- Cisco Express Forwarding
- See CEF
- Cisco IOS
- saving configuration changes xxxiv
- Cisco LightStream 100 ATM switch XC-237
- LANE ATM address prefix XC-233
- configuring XC-236
- LANE configuration server's ATM address on the LightStream 100 switch XC-235
- software version, TR-LANE XC-232
- Cisco LightStream 1010 ATM switch XC-237
- LANE configuration server's ATM address on the LightStream 1010 switch XC-235
- software version, TR-LANE XC-232
- class
- premium XC-91
- standard XC-91
- classification commands XC-73
- Class of Service
- See CoS
- clear ip flow stats command XC-49
- clear ip mds forwarding command XC-170
- clear ip pim interface count command XC-170
- clear mpoa client cache command XC-307
- clear mpoa server cache command XC-314
- client-atm-address name command XC-243
- clns route-cache command XC-15
- closed user groups XC-68
- color
- See VLANs
- command modes
- summary (table) xxx
- command syntax conventions
- Cisco IOS documentation xxvi
- committed access rate
- See CAR
- committed information rate
- See CIR
- communication
- between hosts XC-67
- components
- IPX MLS XC-128
- MLSP XC-128
- MLS-SE XC-128
- NFCC XC-128
- MSL-RP XC-128
- configuration, saving xxxiv
- congestion
- avoidance XC-73
- management XC-73
- preventing XC-73
- connectionless
- architecture XC-68
- IP environment XC-67
- network XC-67
- service XC-67
- connection-oriented overlay XC-67
- connections
- ATM virtual XC-68
- meshed XC-68
- private XC-67
- connectivity XC-67, XC-68
- content hosting XC-67
- CoS
- ATM interface supported features XC-89
- ATM switch supported features XC-90
- benefits XC-68
- committed access rate XC-88
- definition XC-72
- description XC-72
- mapped functions XC-73
- maps XC-91
- sample network topology XC-106
- support on MPLS backbone XC-88
- verifying operation XC-92
- weighted fair queueing XC-88
- weighted random early detection XC-88
- cos-map function XC-91
- customer edge routers
- See CE
D
- data encryption
- MLS
- restrictions XC-133
- data hosting network commerce XC-67
- dCEF
- description XC-7
- disabling XC-28
- distributed tunnel switching
- configuring XC-30
- enabling XC-28
- Inter Process Communication (IPC), using XC-25
- load balancing, disabling XC-29
- NetFlow policy routing XC-46
- dCEF mode XC-25
- (figure) XC-25
- DECnet
- fast switching
- disabling XC-15
- in VLANs XC-180
- LANE support XC-231
- over ISL encapsulation
- configuration (example) XC-200
- configuring XC-186
- VLAN encapsulation format, defining XC-187
- TR-LANE support XC-231
- decnet cost command XC-187
- decnet route-cache command XC-14
- decnet routing command XC-187
- default form of a command
- using xxxiii
- default-name command XC-240, XC-241
- discard policy XC-88
- distributed fair queueing
- configuring XC-92
- distributed switching
- See switching
- documentation conventions
- Cisco IOS xxv
- domain
- bridging XC-175
- broadcast XC-175
- DRiP
- database, enabling XC-190
- drop mechanism XC-110
- dropping packets XC-88
- drop probability XC-88
E
- EBGP
- parameters XC-86
- Edge LSR XC-88
- egress edge device XC-299
- emulated LANs
- default XC-239
- restricted membership XC-239, XC-242
- adding database entries for clients XC-284
- configuration (example) XC-258
- database entries for all clients, configuring XC-242
- database entries for clients, adding XC-243
- setting up database for XC-242
- unrestricted membership XC-239
- configuration (example) XC-255
- setting up database for XC-240
- See also LANE
- enabler packet XC-121
- encapsulation
- AppleTalk Phase II
- in VLANs XC-180
- formats
- defining XC-193
- ISL XC-190, XC-193
- Novell Ethernet_802.2 XC-192
- SAP XC-192
- formats, defining XC-190
- IEEE 802.10 XC-209
- Novell IPX
- configurable encapsulation XC-180
- VLANs
- formats supported XC-180
- encapsulation format
- defining XC-185, XC-188, XC-210
- IEEE 802.10 XC-185, XC-209, XC-210
- ISL XC-185, XC-188, XC-195, XC-196, XC-197
- configuring XC-186
- Security Data Exchange (sde) XC-185, XC-210
- VLANs, defining XC-210
- encapsulation isl command XC-185, XC-186, XC-187, XC-188, XC-192, XC-195, XC-196, XC-197, XC-198
- encapsulation sde command XC-185, XC-210
- encapsulation smds command XC-13
- encapsulation type XC-90, XC-110
- encryption tunnels XC-67
- ESI field and MAC address
- in LANE ATM address XC-233
- establishing privacy XC-67
- Ethernet XC-108
- export target communities XC-85
- extranet XC-68
F
- fair-queue XC-92
- fast switching
- description XC-3, XC-6, XC-11
- disabling
- AppleTalk XC-14
- DECnet XC-14
- IP XC-12
- IPX XC-14
- VINES XC-14
- XNS XC-15
- enabling
- AppleTalk XC-11
- IP XC-12
- IPX XC-13
- same interface XC-12
- enabling for directed broadcast packets
- IPX XC-13
- ISO CLNS XC-15
- SMDS XC-13
- AppleTalk XC-13
- IP XC-13
- IPX XC-13
- See also switching
- feature interaction
- IPX MLS
- restrictions XC-157
- flow masks
- IP multicast MLS XC-126
- flows
- IP multicast MLS
- completely and partially switched XC-127
- Forwarding Equivalence Class XC-59
- frame processing
- MPOA XC-305
- Frame Relay XC-68
- frame tagging
- VLANs XC-177
G
- global configuration mode
- summary xxx
H
- HDLC
- IEEE 802.10 XC-179
- help command xxxi
- holding-time command XC-313
- hops XC-88
- host
- communication XC-67
- content and web XC-67
- Hot Standby Router Protocol
- See HSRP
- HSRP
- group attributes
- customizing XC-189
- over ISL encapsulation
- configuration (example) XC-200
- configuring XC-189
- TR-LANE support XC-231
- hybrid networks XC-69
- hybrid switching environments
- extending VLAN topology XC-181
I
- IBGP session XC-85
- IEEE 802.10
- AppleTalk
- encapsulation XC-209
- connectivity between VLANs XC-179
- description XC-179
- encapsulation XC-178, XC-210
- HDLS serial interface XC-179
- standard XC-209
- IGP routes XC-68
- import target communities XC-85
- ingress edge device XC-299
- interface atm command XC-306, XC-313, XC-318
- ILMI PVCs and signaling, setting up XC-237, XC-243 to XC-246
- interface ATM for multi-VC mode
- configuration (example) XC-109
- interface command XC-48, XC-50, XC-185, XC-188, XC-190, XC-192, XC-193, XC-194, XC-195, XC-196, XC-197, XC-198, XC-210, XC-214, XC-215, XC-216, XC-306
- interface configuration mode
- summary xxx
- interface POS3/0/0 XC-108
- Internet XC-67
- Inter-Switch Link Protocol
- See ISL
- inter-VLAN communication XC-177
- intranet XC-68
- IP
- addresses XC-68, XC-88
- defining XC-189
- enabled state XC-107
- fast switching
- disabling XC-12
- enabling XC-12
- flow switching cache XC-49
- inter-VLAN communication XC-180
- multicast XC-68
- packets XC-72, XC-88
- precedence XC-88
- assignments XC-110
- setting XC-110
- route cache invalidation, controlling XC-15
- routing commands XC-107
- subnets, defining XC-189
- TR-LANE support XC-231
- unnumbered XC-90
- ip address command XC-189
- ip cache-invalidate-delay command XC-15
- ip cef accounting command XC-30
- ip cef command XC-27
- ip flow-cache entries command XC-49
- ip flow-export command XC-48, XC-50
- ip load-sharing per-packet command XC-29
- ip mroute-cache command XC-170
- IP multicast MLS
- complex sample network topology (figure) XC-151
- components XC-125
- configuration (example) XC-148, XC-150
- configuring and monitoring XC-145
- enabling XC-146
- flow mask XC-126
- flows
- completely and partially switched XC-127
- forwarding table XC-125
- Layer 2 forwarding table XC-125
- Layer 3 MLS cache XC-126
- Layer 3 switching information, displaying XC-147
- management interface XC-147
- MLSP XC-147
- packet rewrite XC-126
- PIM, enabling XC-146
- prerequisites XC-143
- restrictions
- access lists XC-145
- external routers XC-145
- routers XC-144
- sample network topology (figure) XC-148
- source-destination-vlan flow mask XC-126
- topologies XC-123
- IP multicast routing
- MDS
- configuration (example) XC-171
- description XC-169
- enabling globally XC-170
- enabling on interface XC-170
- interface status, displaying XC-171
- line card packet counts, clearing XC-170
- line card packet counts, displaying XC-171
- MFIB table, clearing XC-170
- MFIB table, displaying XC-170
- MFIB table summary, displaying XC-170
- packet statistics, displaying XC-171
- switched packet counts, displaying XC-171
- MLS
- See IP multicast MLS
- switched packet counts, displaying XC-171
- See also IP multicast MLS
- ip multicast-routing command XC-170
- ip route-cache cef command XC-28
- ip route-cache command XC-12, XC-13, XC-170
- ip route-cache distributed command XC-50, XC-195
- ip route-cache flow command XC-48, XC-50
- ip route-cache same-interface command XC-12
- ip routing command XC-194
- IPX
- configurable encapsulation formats XC-191
- configuration (example) XC-203
- encapsulation
- SAP XC-192
- encapsulation formats
- Ethernet V2 XC-191
- Novell-ether XC-191
- Subnetwork Access Protocol (SNAP) XC-191
- fast switching
- disabling XC-14
- enabling XC-13
- enabling for directed broadcast packets XC-13
- padding packets XC-17
- route cache
- invalidation XC-17
- size XC-16
- routing over ISLs XC-191
- SAP XC-192
- TR-LANE support XC-231
- VLANs
- TRISL, configuring XC-193
- TRISL, configuring NetWare XC-193
- ipx broadcast-fastswitching command XC-13
- IPX MLS
- access lists
- configuring with, configuration (example) XC-166
- configuring without, configuration (example) XC-165
- overview XC-131
- adding VTP domain interface XC-158
- adding VTP domain interface (caution) XC-158
- assigning VLAN ID to interface XC-158
- cache XC-129
- components XC-128
- MLSP XC-128
- MLS-RP XC-128
- MLS-SE XC-128
- NFFC XC-128
- configuration task list XC-155
- enabling IPX MLS on interface XC-159
- enabling MLSP on router XC-158
- flow mask modes XC-129
- destination XC-129
- destination-source XC-129
- flows XC-128
- management interface
- specifying on router XC-159
- monitoring and maintaining XC-160
- operation XC-162
- packet rewrite XC-130
- prerequisites XC-155
- restrictions XC-156
- feature interaction XC-157
- guidelines XC-156
- maximum transmission unit size XC-157
- sample network topology (figure) XC-131, XC-161
- specifying management interface XC-159
- ipx network encapsulation command XC-192, XC-193, XC-216
- ipx pad-process-switched-packets command XC-17
- ipx route-cache command XC-13, XC-14, XC-17
- ipx route-cache inactivity-timeout command XC-17
- ipx route-cache max-size command XC-16
- ipx routing command XC-191, XC-193, XC-216
- IPX routing over ISL in VLANs
- configuring NetWare
- subinterface XC-192
- enabling IPX routing XC-191
- VLAN encapsulation format XC-192
- ISL
- Banyan VINES encapsulation XC-185
- configuring on a subinterface XC-195
- DECnet encapsulation
- configuring XC-186
- description XC-178
- encapsulation XC-178
- configuration tasks XC-184
- frame tagging XC-183
- HSRP VLAN encapsulation XC-188
- IPX encapsulations XC-191
- link XC-178
- overview XC-183
- VLANs
- identifier XC-183
- traffic, distributed on VIP card XC-193
- XNS encapsulation XC-195, XC-196, XC-197
- ISO CLNS
- fast switching XC-15
K
- keepalive-lifetime command XC-313
- keepalive-time command XC-313
L
- label
- assigning XC-73
- switch routers XC-88
- label binding
- description XC-59
- distribution XC-59
- label edge routers
- See LERs
- label forwarding XC-87
- label switching
- configuring
- destination prefixes XC-78
- paths XC-78
- enabling
- incrementally XC-77
- subset of destination prefixes XC-78
- routing XC-59
- label switching network
- router-only XC-76
- traffic engineered paths XC-82
- label switch routers
- See LSRs
- label virtual circuit
- See LVC
- LAN XC-175
- segmentation XC-176
- with VLANs XC-181
- LANE
- address resolution XC-224
- assigning components to subinterfaces
- rules XC-235
- ATM address
- constructing XC-233
- ESI field XC-233
- ESI values derived from MAC address XC-234
- prefix, configuring on switch XC-233, XC-236
- syntax XC-233
- templates XC-234
- wildcards XC-234
- values of wildcard characters XC-234
- broadcast-and-unknown server (BUS) XC-230
- Cisco's implementation XC-222
- client XC-222, XC-230
- and server, setting up XC-245 to XC-246
- changing to different emulated LAN, change database first XC-245
- MAC address XC-233
- protocol address, assigning XC-245, XC-246
- requires MAC address XC-232
- components XC-222
- on subinterfaces, rules for assigning XC-235
- unique ATM address XC-232
- configuration plan and worksheet recommended XC-236
- configuration server XC-222, XC-230
- ATM address, locally configured XC-237
- database XC-222
- enabling XC-243
- how clients find XC-223
- on major interface XC-235
- configuration task list XC-235
- database
- default LAN, setting up XC-239
- restricted-membership LANs, setting up XC-242
- setting up XC-239
- task list for, setting up XC-239, XC-280
- types of entries XC-222
- unrestricted-membership LANs, setting up XC-240
- default emulated LAN, unrestricted membership mandatory XC-239
- emulated LANs
- and subnetworks XC-245, XC-246
- default, setting up database for XC-239
- default components on several routers, configuration (example) XC-253, XC-254
- multiple (figure) XC-255
- names, unique on an interface XC-222
- ESI template XC-234
- Ethernet support XC-231
- fault tolerance XC-221
- interaction with MPOA XC-301
- LE ARP XC-230
- MAC address
- clients on a given interface XC-232
- MAC layer connectivity XC-221
- MPOA XC-246
- multicast addresses XC-225
- network flappage XC-250
- prefix template XC-234
- routing between emulated LANs XC-222, XC-227, XC-244, XC-245
- routing protocol support XC-231
- scenarios
- multiple emulated LANs XC-226
- single emulated LAN XC-225
- typical XC-225
- server XC-230
- and clients, setting up XC-244 to XC-246
- brief description XC-222
- Cisco's implementation XC-222
- single emulated LAN scenario (figure) XC-226
- SSRP XC-231, XC-247
- support
- Banyan Vines XC-231
- DECnet XC-231
- XNS XC-231
- token ring
- configuring for MPOA XC-317
- VCCs
- Configure Direct XC-223
- Configure Direct (server) XC-223, XC-224
- Control Direct XC-223, XC-224
- Control Distribute XC-223, XC-224
- Data Direct XC-223, XC-224
- Multicast Forward XC-225
- Multicast Send XC-225
- types (figure) XC-223
- VCC types XC-223
- lane auto-config-atm-address command XC-244
- lane client command XC-245, XC-246
- lane client mpoa client command XC-318
- lane client mpoa client name command XC-306
- lane client mpoa server command XC-318
- lane client mpoa server name command XC-313
- lane client tokenring command XC-318
- lane config command XC-243
- lane database command XC-240 to XC-242, XC-281, XC-282, XC-283, XC-318
- LAN emulation
- See LANE
- LAN emulation client
- See LECs
- LAN emulation configuration server
- See LECS
- lane server-bus command XC-245, XC-312
- lane server-bus ethernet command XC-306
- lane server-bus tokenring elan-id command XC-318
- Layer 2
- address XC-6
- encapsulating interfaces XC-181
- forwarding table
- IP multicast MLS XC-125
- Layer 3
- address XC-6
- building VPNs XC-67
- connectionless architecture XC-68
- features XC-73
- MLS cache
- IP multicast MLS XC-126
- LE ARP XC-230
- LECS XC-221
- LECs
- commands XC-318
- configuring for Token Ring XC-317
- configuring the database XC-318
- LERs XC-73, XC-108
- LES XC-221
- LES/BUS
- configuring XC-318
- LightStream ATM switch
- See Cisco LightStream 100 ATM switch
- See Cisco LightStream 1010 ATM switch
- LightStream switch XC-90
- load balancing
- in VLANs XC-181
- loopback XC-108
- low-latency service class XC-68
- LSRs XC-73
- configuring XC-88
- LVC XC-88
M
- MAC address
- See address
- maximum burst size XC-108
- MDS
- See IP multicast routing, MDS
- media access control
- See MAC
- migration path XC-69
- MLS
- access lists XC-122, XC-132
- cache XC-118
- candidate packet XC-120
- CAR
- restrictions XC-134
- configuration (examples) XC-139
- configuring and monitoring XC-135
- data encryption
- restrictions XC-133
- enabler packet XC-121
- external routers
- usage guidelines XC-118
- features XC-119
- implementation XC-117
- media XC-132
- NAT
- restrictions XC-133
- policy route-map
- restrictions XC-133
- See IP multicast MLS
- TCP intercept
- restrictions XC-133
- terminology XC-118
- with an extended access list
- configuration (example) XC-142
- with a standard access list
- configuration (example) XC-141
- without access lists
- configuration (example) XC-140
- MLSP
- description
- IP multicast MLS
- See multicast MLSP
- MLS-RP
- description
- mls rp ip multicast command XC-146
- mls rp ip multicast management-interface command XC-147
- mls rp ipx command XC-158, XC-159, XC-160
- mls rp locate ipx command XC-160
- mls rp management-interface command XC-159, XC-160
- mls rp vlan-id command XC-159
- mls rp vtp-domain command XC-158, XC-160
- MLS-SE
- description
- MMLS-RP
- enabling IP multicast routing XC-146
- enabling on interfaces XC-146
- overview XC-125
- PIM, enabling on interface XC-146
- MMLS-SE
- overview XC-125
- modes
- See command modes
- MPC-LEC and MPS-LEC Relationships XC-302
- MPLS
- backbone XC-88
- configuration (examples) XC-94
- destination prefix XC-91
- distributed fair queueing, configuring XC-92
- forwarding XC-72
- functions XC-59
- multi-VC mode in MPLS-enabled core, configuring XC-91
- multi-VC using cos-map function, configuring XC-91
- network XC-72
- PVC in non-MPLS-enabled core, configuring XC-90
- sample network topology (figure) XC-76, XC-106
- software XC-88
- subinterface, creating XC-111
- traffic engineering, configuring XC-82
- VPN
- configuration (example) XC-102
- VPN features XC-67, XC-84
- VPN security XC-68
- MPOA
- benefits XC-303
- cache imposition reply XC-300
- cache-imposition request XC-300
- client
- See MPC
- description XC-299, XC-301
- ELAN ID, configuring XC-246, XC-306, XC-312
- frame processing XC-305
- LANE clients XC-246
- LANE interaction XC-301
- MPC
- configuration (example) XC-308, XC-314
- configuration tasks XC-305
- monitoring XC-307
- MPS
- configuration (example) XC-308, XC-314
- configuration tasks XC-312
- monitoring XC-314
- network ID XC-312
- shortcuts XC-312
- virtual circuits XC-303
- MPS-NHRP
- routing, interaction XC-311
- resolution reply XC-300
- resolution request XC-300
- sample network topology (figure) XC-308
- server
- See MPS
- Token Ring
- configuration (examples) XC-318
- MPC to MPC Shortcut in an IP Routed Environment (figure) XC-319
- MPC to MPC Shortcut in an IP SRB-Routed Environment (figure) XC-324
- traffic flow XC-301
- mpoa client config name command XC-306, XC-307
- mpoa client name command XC-306
- mpoa server config name command XC-313
- mpoa server name command XC-313
- mpoa server name trigger ip-address command XC-314
- multicast XC-67
- multicast distributed switching
- See IP multicast routing, MDS
- Multicast Forward VCC XC-225
- multicast MLSP
- overview XC-126
- multicast MLS-Route Processor
- See MMLS-RP
- multicast MLS-Switching Engine
- See MMLS-SE
- Multicast Send VCC XC-225
- Multilayer Switching
- See MLS
- Multilayer Switching Protocol
- See MLSP
- Multilayer Switching-Route Processor
- See MLS-RP
- Multilayer Switching-Switching Engine
- See MLS-SE
- multiple LVC model XC-88
- Multiprotocol over ATM
- See MPOA
- multi-VC mode XC-91, XC-108, XC-109
N
- name elan-id command XC-246, XC-306, XC-312, XC-318
- name ELAN preempt command XC-250
- name local-seg-id command XC-240 to XC-242, XC-318
- name server-atm-address command XC-240 to XC-242, XC-281, XC-282, XC-283, XC-318
- NAT
- MLS
- restrictions XC-133
- NBMA network XC-299
- NDE
- configuring XC-139
- NDIS-compliant LAN drivers
- with ATM LANE XC-179
- NetFlow
- accounting benefits XC-47
- cache XC-48
- customizing number of entries XC-49
- free-flow queue XC-48
- IP
- flow switching cache XC-49
- policy routing XC-46
- switching XC-47
- configuration (example) XC-52
- configuring XC-48
- description XC-33, XC-47
- distributed XC-49
- exporting cache entries XC-48, XC-50
- exporting information to network management applications XC-48
- identifying packet flows XC-47
- statistics XC-49
- switching on VIP interfaces XC-49
- traffic control XC-47
- traffic performance XC-47
- NetFlow data export
- See NDE
- NetFlow Feature Card
- See NFFC
- network
- changes XC-177, XC-178
- commerce XC-67
- core XC-68
- design XC-178
- IPX MLS
- topology (figure) XC-131
- management XC-177
- VlanDirector XC-178
- management applications
- NetFlow statistics XC-48
- performance XC-178
- point-to-point overlay XC-67
- provider XC-68
- scalability XC-178
- security XC-178
- services
- accounting XC-177
- quality of service (QoS) XC-177
- security filtering XC-177
- topology XC-178
- network-id command XC-313
- networks
- hybrid XC-69
- switched XC-181
- Next Hop Resolution Protocol
- See NHRP
- NFFC
- description XC-118
- NHRP
- resolution reply XC-300
- resolution request XC-300
- servers XC-301
- no form of a command
- using xxxiii
- no ip load-sharing per-destination command XC-29
- notes
- usage in text xxv
- Novell Ethernet_802.2
- encapsulation
- formats XC-192
- Novell IPX
- in VLANs XC-180
- VLANs
- configurable encapsulation XC-180
O
- ODI-compliant LAN drivers
- with ATM LANE XC-179
- online documentation
- See CCO
P
- PA-A1 interface (ATM Lite) XC-109
- PA-A3 interface XC-109
- packet
- bandwidth XC-73
- classification XC-73
- classifying XC-73
- IP XC-72
- transmitted XC-72, XC-108
- packet discard XC-88
- packet rewrite
- IPX MLS XC-130
- packets
- from customer XC-68
- from VPN XC-68
- padding packets, IPX XC-17
- partitioning XC-68
- PE XC-68
- peer model XC-68
- per-class WFQ XC-89
- per-flow WFQ XC-89
- performance XC-177, XC-178
- per-interface WRED XC-89
- permanent virtual circuit
- See PVC
- per VC WRED XC-110
- PE to CE routing sessions
- configuring XC-85
- PE to PE routing sessions
- configuring XC-85
- PIM
- enabling XC-146
- point-to-point
- connection maps XC-68
- overlay XC-67
- point-to-point WRED XC-109
- configuration (example) XC-109
- policy route-map
- MLS
- restrictions XC-133
- POS3/0/0 XC-108
- precedence assignments XC-110
- preventing congestion XC-73
- prioritizing traffic XC-73
- private
- connections XC-67
- intranet XC-67
- IP addresses XC-68
- privileged EXEC mode
- summary xxx
- process switching
- description XC-6
- See also switching
- prompts
- system xxx
- provider edge routers
- See PE
- public
- IP addresses XC-68
- IP network XC-68
- PVC
- configuring XC-90
- mode XC-90
- on point-to-point subinterface XC-112
- PVC in non-MPLS-enabled core
- configuring XC-90
Q
- QoS XC-67
- quality of service
- See QoS
- question command xxxi
- queue weight XC-92
R
- random early detection
- See WRED
- rate limit XC-108
- reclassifying commands XC-73
- redundancy
- between multiple routers XC-188
- HSRP XC-188
- in VLANs XC-181
- LANE XC-221
- See also HSRP
- resolution reply
- MPOA XC-300
- NHRP XC-300
- resolution request
- MPOA XC-300
- NHRP XC-300
- resources
- sharing between VLANs XC-181
- RIP
- parameters XC-86
- ROM monitor mode
- summary xxx
- route
- distribution XC-181
- processing XC-181
- route cache
- invalidation, controlling XC-15
- size XC-16
- switching decision XC-3
- route cache invalidation, controlling XC-17
- route map XC-85
- routers
- architecture XC-4
- as MPOA servers XC-305
- CE XC-68
- in switched VLANs XC-181
- PE XC-68
- Route Switch Module/Versatile Interface Processor 2
- See RSM/VIP2
- route target communities XC-85
- routing
- between VLANs XC-181
- decision XC-4
- processes XC-4, XC-5
- routing decision XC-4
- routing protocol XC-87
- RSM/VIP2 XC-302
S
- saving configuration changes xxxiv
- scalability XC-67, XC-68
- in VLANs XC-178
- scheduling
- automated XC-73
- Secure Data Exchange (SDE)
- IEEE 802.10 XC-209
- security XC-178
- filtering XC-177
- VLANs XC-177
- Security Association Identifier (SAID)
- IEEE 802.10 XC-209
- security levels XC-68
- segmentation XC-175, XC-176
- with VLANs XC-181
- service access point
- See SAP
- service class XC-68
- set configserver command XC-239
- set ip next-hop verify-availability command XC-51
- setting IP precedence XC-110
- shortcut-frame-count command XC-307
- shortcut-frame-time command XC-307
- shortcut VCC XC-300, XC-305
- show interface stats command XC-171
- show ip cache command XC-16
- show ip mcache command XC-171
- show ip mds forwarding command XC-170
- show ip mds interface command XC-171
- show ip mds stats command XC-171
- show ip mds summary command XC-170
- show ip pim interface count command XC-171
- show ip route flow command XC-49
- show ip route profile command XC-30
- show lane bus command XC-250
- show lane client command XC-251
- show lane command XC-250
- show lane config command XC-251
- show lane database command XC-251
- show lane default-atm-addresses command XC-237, XC-251
- show lane le-arp command XC-252
- show lane server command XC-252
- show mls rp ip multicast command XC-147
- show mls rp ipx command XC-159, XC-160
- show mls rp vtp-domain XC-160
- show mpoa client cache command XC-307
- show mpoa client command XC-307
- show mpoa client statistics command XC-307
- show mpoa default-atm-addresses command XC-307, XC-314
- show mpoa server cache command XC-314
- show mpoa server command XC-314
- show mpoa server statistics command XC-314
- show route-map ipc command XC-52
- Simple LANE Service Replication
- backup servers XC-221
- redundancy requirements XC-247
- Simple Server Redundancy Protocol
- See SSRP
- SMDS
- fast switching
- AppleTalk XC-13
- configuring XC-13
- IP XC-13
- IPX XC-13
- source-route transparent bridging
- TR-LANE support XC-231
- spoofing XC-68
- SRB
- TR-LANE
- configuration (example) XC-261, XC-262
- TR-LANE support XC-231
- SSRP
- configuring XC-237
- standby authentication command XC-189
- standby ip command XC-189
- standby preempt command XC-189
- standby priority command XC-189
- standby timers command XC-189
- standby track command XC-189
- static route PE to CE routing sessions
- configuring XC-87
- statistics
- NetFlow accounting XC-49
- subif XC-90
- subinterface configuration mode
- summary xxx
- subinterfaces XC-68
- subnets
- IP
- defining XC-189
- switching
- distributed XC-3, XC-49
- fast XC-6
- description XC-3
- IP multicast multilayer
- See IP multicast MLS
- ISL VLAN traffic XC-193
- NetFlow XC-47, XC-49
- configuration (example) XC-52
- configuring XC-48
- exporting cache entries XC-48, XC-50
- identifying packet flows XC-47
- NetFlow distributed XC-49
- next-hop destination XC-4
- next-hop determination XC-5
- overview XC-3
- paths XC-3, XC-6, XC-11
- processes XC-3, XC-4, XC-5, XC-6
- route caching XC-3
- VIP distributed XC-50, XC-193, XC-194
- enabling XC-195
T
- Tab key
- command completion xxxi
- TCP/IP XC-67
- TCP intercept
- MLS
- restrictions XC-133
- telephony services XC-67
- Token Ring
- LANE
- configuring for MPOA XC-317
- MPOA
- configuration (examples) XC-318
- MPC to MPC Shortcut in an IP Routed Environment (figure) XC-319
- MPC to MPC Shortcut in an IP SRB-Routed Environment (figure) XC-324
- Token Ring ISL
- See TRISL
- Token Ring MPOA
- MPC to MPC Shortcut In an IP Routed Environment (figure) XC-319
- TOS XC-73, XC-92, XC-110
- traffic
- broadcast XC-177
- controlling patterns XC-178
- control with NetFlow XC-47
- multicast XC-177
- performance XC-47
- prioritizing XC-73
- traffic engineering
- configuring
- backup path XC-82
- filter XC-83
- traffic engineering route
- configuring
- tunnel XC-83
- traffic flow
- MPOA XC-301
- traffic patterns XC-68
- translation
- in VLANs XC-181
- TRISL
- enabling XC-190
- encapsulation XC-190
- IP
- routing XC-190
- IPX XC-192
- encapsulation XC-193
- RIF
- configuration (example) XC-202, XC-205
- TrBRF VLANs
- configuration (example) XC-202
- TRISL and Ethernet VLANs
- configuration (example) XC-203
- TRISL VLAN and Token Ring
- configuration (example) XC-205
- TR-LANE
- AppleTalk XC-231
- APPN XC-231
- Banyan Vines XC-231
- benefits XC-230
- Cisco LightStream 100 XC-232
- Cisco LightStream 1010 XC-232
- DECnet XC-231
- hardware requirements XC-232
- HSRP XC-231
- IP XC-231
- IPX XC-231
- software version XC-232
- source-route transparent bridging XC-231
- SRB XC-231
- configuration (example) XC-261, XC-262
- XNS XC-231
- See also LANE XC-230
- TSP tunnel
- configuring
- head end XC-83
- TSP tunnel signaling
- configuring XC-83
- tunnels XC-67
- type of service
- See TOS
U
- user EXEC mode
- summary xxx
V
- VCCs XC-299, XC-305
- VCC types XC-223
- (figure) XC-223
- Versatile Interface Processor
- See VIP
- video conferencing XC-68
- VINES
- fast switching
- disabling XC-14
- vines metric command XC-186
- vines route-cache command XC-14
- vines routing command XC-186
- VIP
- distributed switching
- between ISL VLANs XC-194, XC-207
- enabling XC-195
- ISL encapsulation XC-195
- ISL VLAN traffic XC-193, XC-206
- routing decisions XC-3
- scalability XC-194, XC-206
- VLAN configuration (example) XC-207
- NetFlow distributed switching XC-49
- virtual channel connection
- See LANE, VCCs
- virtual circuit XC-91
- virtual LANs
- See VLANs
- VLANs
- addressing XC-181
- AppleTalk
- over IEEE 802.10 encapsulation XC-209
- routing XC-209, XC-210
- subinterface customization XC-209
- AppleTalk over ISL encapsulation XC-184
- AppleTalk Phase II support XC-180
- Banyan VINES over ISL encapsulation XC-185
- Banyan VINES support XC-180
- broadcast domain XC-175
- colors XC-177
- communication between XC-177, XC-178
- connecting Fast Ethernet devices XC-178
- DECnet over ISL encapsulation XC-186
- DECnet support XC-180
- description XC-175
- designing switched VLANs XC-181
- encapsulation format XC-210
- frame tagging XC-177
- hybrid switching environments XC-181
- identifier XC-177
- IEEE 802.10 encapsulation XC-178
- interoperability XC-180
- IP XC-180, XC-190
- IPX XC-192
- ISL encapsulation XC-178
- isolation between XC-177
- LAN segmentation XC-181
- Layer 2 translation XC-178
- Layer 3 routing XC-178
- load balancing XC-181
- network
- changes XC-178
- design XC-178
- management XC-177
- performance XC-177
- Novell IPX encapsulation XC-180
- packets traversing shared backbone XC-183
- performance XC-178
- redundancy in XC-181
- routers in XC-181
- routing between XC-181, XC-206
- routing Novell IPX XC-191
- scalability XC-176, XC-178
- security XC-177, XC-178
- segmenting LANs with XC-175, XC-176
- sharing resources between XC-181
- supported VLAN encapsulation formats XC-180
- translation XC-181
- VlanDirector XC-178
- VLAN identifier in IEEE 802.10 encapsulation XC-209
- XNS over ISL encapsulation XC-195, XC-196, XC-197
- XNS support XC-180
- VPN
- connection-oriented XC-68
- defining XC-85
- IBGP distribution XC-72
- label XC-68
- multiple XC-68
- packets XC-68
- partitioned routes XC-68
- routes XC-68
- route target communities XC-71
- solutions XC-67
- traffic XC-68
- verifying operation XC-87
- VRF table XC-87
- VTP domain
- IPX MLS
- adding VTP domain interface XC-158
W
- web hosting XC-67
- weighted fair queueing
- See WFQ
- weighted random early detection
- See WRED
- WFQ
- as a CoS building block XC-88
- for congestion management XC-73
- wildcards
- LANE address templates XC-234
- WRED
- as a CoS building block XC-88
- for congestion avoidance XC-73
- point-to-point XC-109
X
- XNS
- fast switching XC-15
- in VLANs XC-180
- LANE support XC-231
- over ISL encapsulation XC-195, XC-196, XC-197
- TR-LANE support XC-231
- xns network command XC-196, XC-198
- xns route-cache command XC-15
- xns routing command XC-195, XC-196, XC-197
Copyright 1989-2000
©
Cisco Systems Inc.
