Index: Cisco IOS Interface Configuration Guide, Release 12.1
Symbols Numerics A B C D E F G H I K L M N O P Q R S T U V W X
Symbols
- ? command xxi
Numerics
- 100VG-AnyLAN port adapter
- configuring IC-33
- examples IC-63
- 10Base-T IC-27
A
- abbreviating commands
- context-sensitive help xxi
- access-list command IC-53
- alarms and errors on T1 line IC-11
- AMI line
- ones density IC-119
- AppleTalk
- RTMP
- broadcasting packets IC-155
- tunneling IC-155
- across IP-only backbone (example) IC-161
- across IP-only backbone (figure) IC-162
- definition IC-155
- GRE IC-159
- appletalk cable-range command IC-159
- tunneling AppleTalk using GRE IC-159
- AppleTalk network address caution IC-159
- APS
- alarm reporting IC-117
- BER thresholds IC-117
- configuration IC-115
- configuration options IC-116
- examples IC-139
- monitoring IC-117
- protect interface IC-116
- working interface IC-116
- aps authenticate command IC-116
- aps force command IC-116
- aps group command IC-117
- aps lockout command IC-117
- aps manual command IC-117
- aps protect command IC-116
- aps revert command IC-117
- aps timers command IC-117
- aps unidirectional command IC-117
- aps working command IC-116
- asynchronous host mobility IC-160
- asynchronous host roaming (example) IC-160
- Asynchronous Transfer Mode-Data Exchange Interface
- See ATM-DXI
- ATM-DXI
- encapsulation IC-73
- atm-dxi map command IC-71
- Automatic Protection Switching of Packet-over-SONET Circuits
- See APS
- automatic receiver polarity reversal
- enabling IC-45
- auto-polarity command IC-45
B
- bandwidth command IC-7
- BERT
- testing IC-102
- BERT/TDM Enhancements for Cisco AS5300 8PRI/4T Cards
- configuring IC-102
- description IC-111
- example
- BERT profile configuration IC-136
- E2-clockrate configuration IC-136
- verifying configuration IC-102
- BGP
- sessions staying up IC-153
- binary synchronous communications
- See Bisync
- Bisync
- specifying primary and secondary roles IC-74
- bit control
- setting for FDDI IC-42
- bit-error rate testing
- See BERT
- Border Gateway Protocol
- See BGP
C
- cablelength command IC-92
- carrier protocol
- tunneling IC-154
- cautions
- AppleTalk network address IC-159
- Cayman tunnel IC-159
- clear service-module command IC-14
- enabling CEF/dCEF IC-35
- FEIP2-DSW-2FX interfaces IC-26
- MTU caution IC-8, IC-112
- port-channel interface IC-36
- usage in text xvii
- Cayman encapsulation protocol IC-154
- Cayman tunnel caution IC-159
- CCO
- accessing xvii
- definition xvii
- CEF/dCEF enabling caution IC-35
- channel-group command IC-36
- channelized T3
- configuring CT3IP IC-90
- description IC-89
- See also T3
- Channelized T3 Interface Processor
- enhancements IC-89
- See also T3
- Channelized T3 Support for the Cisco AS5800
- configuring IC-91
- T3 configuration
- verifying IC-100
- typical CT3IP configuration example IC-134
- channel service unit/digital service unit
- See CSU/DSU
- Cisco 1000 series LAN Extender
- description IC-47
- See also LAN Extender
- Cisco 2500 series routers
- low-speed serial interfaces IC-126
- Cisco 2520 to Cisco 2523 routers
- synchronous or asynchronous, setting IC-132
- Cisco 2524
- fractional T1/T1 service modules IC-118
- Cisco 2525
- fractional T1/T1 service modules IC-118
- Cisco 4000 series routers
- FDDI
- configuring IC-43
- Cisco Connection Online
- See CCO
- Cisco IOS
- saving configuration changes xxiv
- clear controller lex command IC-56
- clear counters command IC-16
- clear hub command IC-16
- clear hub counters command IC-16
- clear interface command IC-17
- clear interface tokenring command IC-59
- clear line command IC-17
- clear service-module command caution IC-14
- clock
- enabling internal IC-85
- signal
- inverting IC-86
- clock source
- service modules, 2- and 4-wire CSU/DSU IC-123
- clock source command IC-89, IC-92, IC-114
- CMT IC-38
- FDDI process IC-38
- microcode, disabling IC-43
- cmt connect command IC-43
- cmt disconnect command IC-43
- command
- encapsulation ppp IC-77, IC-79, IC-82
- show interfaces serial 0/0 IC-78, IC-79, IC-82
- command modes
- summary (table) xx
- command syntax conventions
- Cisco IOS documentation xvii
- compression
- distributed IC-75
- hardware IC-75
- HDLC IC-76
- PPP IC-75
- show pas caim stats 0 IC-83
- software IC-75
- compress stac command IC-76
- concentrator port
- enabling IC-61
- monitoring IC-61
- configuration, saving xxiv
- configuring T1 cable length
- description IC-104
- using line build-out commands IC-105
- connection management
- See CMT
- controller t3 command IC-92
- copy flash lex command IC-56
- copy tftp lex command IC-56
- counters
- clearing interface IC-16
- CRC
- configuring IC-84
- enabling 32 bits IC-84
- crc4 command IC-88
- crc command IC-84
- CSC-R interface card IC-20
- CSU/DSU
- Cisco 2524 IC-118
- Cisco 2525 IC-118
- loopback IC-18
- CT3
- software configuration verification IC-100
- cyclic redundancy check
- See CRC
D
- DAS
- FDDI IC-37
- data
- inverting IC-85
- Data Compression AIM for the Cisco 2600 Series Routers
- configuring data compression AIM IC-76
- configuring Frame-Relay map compression IC-78
- configuring Frame-Relay payload-compression IC-81
- configuring PPP compression IC-77
- verifying Frame-Relay map compression IC-79
- verifying PPP compression IC-78
- data service unit
- See DSU
- dce-terminal-timing enable command IC-87
- DDS mode
- service modules
- 2- and 4-wire CSU/DSU IC-125
- default form of a command
- using xxiii
- delay
- setting on interface IC-7
- delay command IC-7
- description command IC-6
- diagnostic information
- controller IC-10
- interface processor IC-10
- port adapters IC-10
- Dial and System Management Commands for the Cisco AS5800
- configuring T1 cable length
- description IC-104
- using line build-out commands IC-105
- T1/E1 line termination IC-104
- dialup mode
- service modules
- 2- and 4-wire CSU/DSU IC-125
- Distance Vector Multicast Routing Protocol
- See DVMRP
- distributed compression IC-75
- documentation conventions
- Cisco IOS xvi
- down-when-looped command IC-18
- DSU
- configuration information
- displaying IC-108
- configuration information, displaying IC-108, IC-110
- interoperability mode
- setting IC-107
- interoperability mode, setting IC-109
- maximum bandwidth
- setting IC-107
- maximum bandwidth, setting IC-109
- dsu bandwidth command IC-107, IC-109
- dsu mode command IC-107, IC-109
- dte-invert-txc command IC-87
- DTR
- signal pulsing IC-86
- Dual Attach Stations
- See DAS
- duplex mode
- Fast Ethernet interface IC-27
- DVMRP IC-159
E
- E3
- configuring IC-106, IC-109
- encapsulation
- ATM-DXI IC-73
- Cayman IC-154
- EON IC-155
- Ethernet interface IC-24
- GRE IC-154
- HDLC IC-73
- HSSI IC-71
- NOS IC-155
- PPP
- LAN Extender interface IC-49
- synchronous serial IC-73
- tunneling IC-155
- encapsulation arpa command IC-25
- encapsulation atm-dxi command IC-71
- encapsulation command IC-51, IC-71, IC-76, IC-77, IC-79, IC-82
- encapsulation hdlc command IC-76
- encapsulation ppp command IC-51, IC-77, IC-79, IC-82
- encapsulation sap command IC-25
- encapsulation snap command IC-25
- EON IC-155
- Ethernet
- encapsulation (example) IC-61
- full-duplex
- example IC-62
- interfaces
- encapsulation IC-25
- loopback server
- configuring IC-20
F
- Fast EtherChannel IC-33
- CEF IC-34
- configuring IC-35
- displaying information IC-37
- example IC-64
- Fast Ethernet
- assigning IC-36
- removing IC-36
- HSRP IC-34
- keepalives IC-36
- Fast Ethernet
- configuring AS5300 IC-27
- Fast EtherChannel
- assigning IC-36
- description IC-33
- displaying information IC-37
- example IC-64
- removing IC-36
- full-duplex IC-26
- media type IC-26
- RJ-45 receptacle IC-24
- fast switching
- Level 2 Forwarding traffic IC-9
- FDDI
- bandwidth
- determining IC-41
- bit control
- setting IC-42
- bridging configurations IC-40
- C-Min timer IC-41
- CMT microcode control IC-43
- description IC-37
- disconnecting IC-43
- duplicate address checking IC-42
- encapsulation mode compatibility IC-40
- frame contents IC-37
- frames-per-token
- configuration (example) IC-43
- configuration, tasks IC-43
- full-duplex IC-40
- SMT IC-44
- frame processing IC-42
- Version 7.3 IC-37
- starting IC-43
- stopping IC-43
- TB-Min timer IC-42
- timeout timer IC-42
- transmission time
- controlling IC-41
- fddi burst-count command IC-44
- fddi c-min command IC-41
- fddi cmt-signal-bits command IC-42
- fddi duplicate-address-check command IC-42
- fddi encapsulate command IC-40
- fddi if-cmt command IC-43
- fddi smt-frames command IC-42
- fddi tb-min command IC-42
- fddi tl-min-time command IC-41
- fddi token-rotation-time command IC-41
- fddi t-out command IC-42
- fddi valid-transmission-time command IC-41
- FEIP2-DSW-2FX interfaces caution IC-26
- Fiber Distributed Data Interface
- See FDDI
- fiber-optic cable
- FDDI designations for IC-43
- fractional T1/T1service modules
- Cisco 2524 IC-118
- Cisco 2525 IC-118
- framed mode IC-88
- frames
- transmission
- configuration (example) IC-43
- configuration tasks IC-43
- frame-type command IC-33
- framing command IC-92, IC-107, IC-109
- full-duplex command IC-26, IC-40
G
- G.703 interface IC-87, IC-88
- generic router encapsulation
- See GRE
- global configuration mode
- summary xx
- GRE
- configuring tunnel mode IC-158
- tunneling
- AppleTalk IC-159
H
- half-duplex command IC-26, IC-40, IC-130
- half-duplex controlled-carrier command IC-130, IC-131
- half-duplex DCE state machine IC-128
- constant carrier mode IC-129
- controlled-carrier mode IC-129
- receive, figure IC-130
- transmit, figure IC-129
- half-duplex DTE state machine
- receive, figure IC-128
- transmit IC-126
- transmit, figure IC-127
- half-duplex mode
- controlled-carrier and constant-carrier
- changing modes IC-130
- half-duplex timer command IC-131
- half-duplex timer cts-delay command IC-130
- half-duplex timer cts-drop-timeout command IC-127
- half-duplex timer dcd-drop-delay command IC-129
- half-duplex timer dcd-txstart-delay command IC-129
- half-duplex timer rts-drop-delay command IC-127
- half-duplex timer rts-timeout command IC-127
- half-duplex timers
- tuning IC-131
- half-duplex timer transmit-delay command IC-126, IC-128
- hardware compression IC-75
- HDLC
- compression IC-76
- encapsulation
- default for serial interfaces IC-73
- help command xxi
- High-Speed Serial Interface
- See HSSI
- hold queue
- limit IC-6
- hold-queue command IC-6
- HSSI
- 1-port IC-70
- encapsulation methods IC-71
- Interface Processor (HIP)
- Cisco 7000 series IC-69
- Cisco 7500 series IC-69
- loopback
- enabling IC-19
- figure IC-19
- VIP2 IC-70
- hssi internal-clock command IC-71
- HSSI line
- invoking ATM over IC-71
- HSSI network module
- configuration
- examples IC-133
- feature summary IC-70
- prerequisite tasks IC-70
- hub command IC-45
- hub ethernet command IC-15, IC-46
- hub ports
- automatic receiver polarity reversal
- enabling IC-45
- configuration (examples) IC-66
- enabling IC-45
- hub counters
- clearing IC-16
- hub statistics
- displaying IC-16
- link test function IC-45
- resetting IC-16
- router models IC-44
- shutting down IC-15
- source address control
- enabling IC-46
I
- IEEE 802.2
- LLC encapsulation IC-25
- IEEE 802.3
- encapsulation IC-25
- IEEE 802.5
- Token Ring media IC-58
- ignore-dcd command IC-87
- interface command IC-158
- interface configuration mode
- summary xx
- interface ethernet command IC-25
- interface fastethernet command IC-25, IC-36
- interface fddi command IC-39
- interface hssi command IC-70
- interface lex command IC-51
- interface loopback command IC-154
- interface null command IC-154
- interface port-channel command IC-35
- interface pos command IC-112, IC-116
- interfaces
- ATM IC-69
- bandwidth on, setting IC-7
- configuration examples IC-21, IC-132
- configuring IC-4
- counters
- clearing IC-16
- delay value
- setting IC-7
- descriptive name
- adding IC-5
- displaying information about IC-10
- Ethernet IC-23
- examples IC-21
- FDDI IC-37
- hold queues IC-6
- LAN Extender IC-47
- loopback interface
- emulating an interface IC-153
- low-speed serial IC-126
- async commands supported IC-132
- configuration task list IC-75, IC-126
- constant-carrier mode IC-131
- controlled-carrier mode IC-131
- half-duplex DCE state machine IC-128
- half-duplex DTE state machine IC-126
- sync commands supported IC-132
- synchronous or asynchronous
- setting IC-131
- maintaining IC-9
- monitoring IC-9
- naming IC-5
- null IC-154
- restarting IC-17
- shutting down
- (example) IC-22
- task IC-17
- synchronous serial IC-72
- Token Ring IC-58
- tunnel IC-158
- types IC-3
- See also subinterfaces
- interface serial command IC-51, IC-73, IC-107, IC-109, IC-145
- interface tokenring command IC-60
- interface tunnel command IC-158, IC-159
- interface vg command IC-33
- internal clock
- enabling IC-85
- international bit command IC-107
- invert data command IC-85, IC-107
- invert rxclock command IC-86
- invert txclock command IC-86
- IP
- tunneling IC-155
- (examples) IC-161
- ip address command IC-35, IC-51
K
- KA9Q program IC-155
- keepalive command IC-7
- keepalives
- Fast EtherChannel IC-36
- keepalive timers
- adjusting IC-7
L
- LANCE controller IC-27
- LAN Extender
- access list
- assigning IC-53
- acknowledgment timeout IC-55
- description IC-47
- Ethernet interface
- shutting down IC-55
- filtering for Ethernet- and SNAP- encapsulated packets IC-54
- frames
- filtering by MAC address IC-51, IC-53
- filtering by protocol type IC-54
- interface
- access list (examples) IC-67
- binding to the serial line IC-49
- configuring IC-49, IC-67
- enabling (example) IC-67
- monitoring IC-15
- statistics, displaying IC-15
- interface on router
- configuring IC-51
- MAC address, assigning IC-51
- PPP encapsulation on serial interface IC-51
- serial interface, configuring IC-51
- LEDs IC-56
- figure IC-56, IC-57
- on LAN Extender IC-56
- trouble indicators (table) IC-57, IC-58
- MAC address IC-48
- priority list
- assigning IC-54
- problem solving IC-56
- queueing priorities
- setting IC-54
- rebooting IC-56
- restarting IC-55
- retries
- setting IC-55
- retry count IC-55
- software image
- downloading IC-56
- timeout
- setting IC-55
- troubleshooting IC-56
- LED trouble indicators table IC-57, IC-58
- Level 2
- switching IC-58
- Level 2 Forwarding
- fast switching
- stack group environment IC-9
- Level 3 switching IC-58
- lex burned-in-address command IC-51
- lex input-address-list command IC-53
- lex input-type-list command IC-54
- lex priority-group command IC-54
- lex retry-count command IC-55
- lex timeout command IC-55
- line build-out commands IC-105
- line coding
- NRZI IC-84
- link-test command IC-45
- local-lnm command IC-60
- loopback
- diagnostics IC-18
- Ethernet server support IC-20
- HSSI IC-19
- interface IC-153
- MCI serial card IC-20
- SCI serial card IC-20
- serial interface IC-19
- VMS system IC-20
- loopback command IC-20
- loopback dte command IC-13, IC-19, IC-107, IC-110
- loopback line command IC-12, IC-19
- loopback line payload command IC-12
- loopback local command IC-97, IC-100, IC-107, IC-110
- loopback network command IC-100
- loopback network line command IC-97, IC-107, IC-110
- loopback network payload command IC-97, IC-107, IC-110
- loopback remote command IC-13, IC-14, IC-20, IC-100
- loopback remote line fdl command IC-103
- loopback remote line inband command IC-97
- loopback remote payload command IC-103
- loop circuit command IC-20
M
- MAC address
- LAN Extender Interface IC-53
- maximum transmission unit
- See MTU
- MCI interface card
- loopback on serial IC-20
- pulsing DTR signal on IC-86
- mdl command IC-101
- media-type command IC-26
- media-type half-duplex command IC-74
- MIB
- Token Ring support
- variables IC-58
- modes
- See command modes
- monitoring APS IC-117
- mop enabled command IC-6
- mop sysid command IC-6
- MTU
- adjusting media MTU IC-8
- MTU caution IC-8, IC-112
- mtu command IC-8
N
- national bit command IC-107
- network operating system
- See NOS
- no channel-group command IC-36
- no form of a command
- using xxiii
- no half-duplex controlled-carrier command IC-131
- no ip address command IC-36
- NOS
- encapsulation IC-155
- tunneling IC-155
- notes
- usage in text xvii
- NRZI
- encoding IC-84
- nrzi-encoding command IC-85
- null interface
- configuring IC-154
O
- OIR IC-8
- online documentation
- See CCO
- online insertion and removal
- See OIR
P
- PA-12E/2FE port adapter
- configuration example IC-62
- configuring IC-30
- monitoring IC-31
- PA-4R-DTR port adapter IC-59
- packet-over-SONET
- See POS
- packets
- maximum size
- setting IC-8
- packet tunneling
- and asynchronous host roaming IC-160
- PA-E3 port adapter
- configuration example IC-137
- monitoring IC-108
- troubleshooting IC-107
- PA-POS-OC3 Packet OC-3 Port Adapter
- packet-over-SONET OC3 configuration IC-138
- passenger protocol
- tunneling IC-154
- PA-T3 port adapter
- configuration example IC-137
- monitoring IC-110
- troubleshooting IC-110
- PCbus LAN management IC-60
- PCM
- FDDI IC-41
- Physical Connection Management
- See PCM
- physical-layer command IC-131
- ping command IC-18
- point-of-presence
- See POP
- polarity, receive circuitry, reversing automatically IC-45
- POP
- Port Aggregation Protocol IC-37
- port-channel
- See Fast EtherChannel
- port-channel interface caution IC-36
- POS
- configuring IC-115
- scrambling IC-114
- pos ais-shut command IC-114, IC-118
- pos report command IC-117
- pos scramble-atm command IC-114
- pos threshold command IC-117
- PPP
- compression IC-75
- with LAN Extender IC-49
- priority-list protocol command IC-54
- privileged EXEC mode
- summary xx
- prompts
- system xx
- protect interface, APS IC-116
- protocols
- carrier
- tunneling IC-154
- passenger
- tunneling IC-154
- transport
- tunneling IC-155
- pulse-time command IC-86
Q
- question command xxi
- queues
- controlling hold IC-6
R
- Real-time Transport Protocol
- See RTP
- recursive route problem IC-157
- remote Ethernet LAN IC-48
- remote loopback
- 56/64 kbps CSU/DSU IC-14
- interface
- FT1/T1 CSU/DSU, Cisco 2524 and 2525 IC-13
- RFC 1042
- Standard for the Transmission of IP Datagrams Over IEEE 802 Networks IC-25, IC-59
- RFC 1231
- IEEE 802.5 Token Ring MIB IC-58
- RFC 1406
- Definitions of Managed Objects for DS1 and E1 Interface Types IC-90
- RFC 1407
- DS3 MIB Variables IC-90, IC-105, IC-106, IC-108
- RFC 1516
- Definitions of Managed Objects for IEEE 802.3 Repeater Devices IC-44
- RFC 1619
- PPP over SONET/SDH IC-111
- RFC 1662
- PPP in HDLC-like Framing IC-111
- RFC 1889
- RTP--A Transport Protocol for Real-Time Applications IC-76
- RIF
- cache
- clearing IC-17
- monitoring IC-10
- ring
- scheduling FDDI IC-41
- ROM monitor mode
- summary xx
- routing
- on Token Ring IC-58
- RTP
- description IC-76
- running-config command IC-5
S
- saving configuration changes xxiv
- SCI interface card
- loopback on serial IC-20
- scramble command IC-107, IC-110
- sdlc cts-delay command
- See half-duplex timer command
- sdlc rts-timeout command
- See half-duplex timer command
- serial
- low-speed IC-126
- DTE, transmit IC-126
- serial interfaces
- clearing IC-17
- configuring IC-72
- DTR signal pulsing IC-86
- high-speed IC-69
- loopback IC-20
- low-speed IC-126
- PA-2JT2 configuration example IC-145
- PA-E3 port adapter configuration (example) IC-137
- PA-T3 port adapter configuration (example) IC-137
- synchronous
- encapsulation IC-73
- maintaining IC-17
- supporting cards IC-72
- transmit delay IC-86
- serial line
- encapsulation IC-73
- service-module 56k clock rate command IC-124
- service-module 56k clock source command IC-123
- service-module 56k data-coding command IC-124
- service-module 56k data-coding scrambled command IC-124
- service-module 56k network-type command IC-125
- service-module 56k remote-loopback command IC-125
- service-module 56k switched-carrier command IC-125
- service modules
- 2- and 4-wire CSU/DSU
- DDS mode IC-125
- dialup mode IC-125
- Cisco 2524
- 2- and 4-wire CSU/DSU IC-123
- monitor and maintain IC-11
- reset IC-14
- Cisco 2525
- 2- and 4-wire CSU/DSU IC-123
- monitor and maintain IC-11
- reset IC-14
- T1/fractional T1 IC-118
- remote loopback IC-121
- service modules, 2- and 4-wire CSU/DSU
- clock source IC-123
- service-module t1 clock source command IC-119
- service-module t1 data-coding inverted command IC-119
- service-module t1 framing command IC-120
- service-module t1 lbo command IC-120
- service-module t1 lbo none command IC-120
- service-module t1 linecode command IC-120
- service-module t1 remote-alarm-enable command IC-121
- service-module t1 remote-loopback full command IC-121
- service-module t1 remote-loopback payload command IC-121
- service-module tx1 data-coding normal command IC-119
- show aps command IC-116, IC-117
- show async status command IC-10
- show compress command IC-10
- show controller e1 command IC-11
- show controller fastethernet command IC-24
- show controller pos command IC-116
- show controllers bri command IC-10
- show controllers cbus command IC-24, IC-58, IC-100
- show controllers command IC-10, IC-24, IC-58, IC-117, IC-127
- show controllers cxbus command IC-10
- show controllers lex command IC-15
- show controllers mci command IC-24
- show controllers serial command IC-108, IC-110
- show controllers token command IC-58
- show controller t1 command IC-11
- show controller t3 command IC-100, IC-101
- show diagbus command IC-10
- show hardware command IC-4
- show hub command IC-16
- show interface fastethernet command IC-24
- show interface pos command IC-116, IC-117
- show interfaces async command IC-10
- show interfaces command IC-4, IC-10, IC-16, IC-24, IC-58
- show interfaces fddi command IC-38
- show interfaces lex command IC-15
- show interfaces port-channel command IC-37
- show interfaces serial 0/0 command IC-78, IC-79, IC-82
- show interfaces serial command IC-15, IC-100, IC-108, IC-110
- show interfaces tunnel command IC-16
- show pas caim stats command IC-83
- show process cpu command IC-76
- show rif command IC-10
- show system IC-5
- show version command IC-11
- shutdown (hub) command IC-15, IC-45
- shutdown command IC-17, IC-55
- shutdown interfaces
- example IC-22
- result IC-17
- signaling phase
- FDDI CMT IC-42
- signals
- pulsing DTR IC-86
- SMT
- message queue size
- setting IC-44
- smt-queue-threshold command IC-44
- SMT Version 7.3 IC-37
- SNAP
- Ethernet protocols over 802.2 media IC-25
- SNMP
- traps IC-46
- snmp trap illegal-address command IC-46
- software compression
- HDLC IC-76
- LAPB IC-76
- PPP IC-75, IC-76
- statistics
- displaying IC-10
- source-address command IC-46
- source-route bridging
- maintaining IC-17
- Token Ring IC-58
- SP
- displaying information IC-10
- speed
- Fast Ethernet interface IC-27
- squelch normal command IC-27
- squelch reduced command IC-27
- Stacker compressor IC-76
- Station Management
- See SMT
- subinterface configuration mode
- summary xx
- subinterfaces IC-5
- configuring IC-5
- maximum allowed IC-5
- subnets
- discontinuous
- connecting, tunneling IC-155
- Switch Processor
- See SP
- synchronous serial interface
- encapsulation methods IC-73
- overview IC-72
T
- T1
- alarms IC-11
- CSU WIC IC-122
- displaying line activity IC-11
- monitor activity on line IC-11
- shutdown
- T1 circuit IC-22
- T1 line IC-22, IC-138
- See also T3
- T1/E1 line termination IC-104
- T1/fractional T1 service modules
- Cisco 2524 IC-118
- Cisco 2525 IC-118
- t1 bert pattern command IC-102
- t1 clock source command IC-94
- t1 external command IC-95
- t1 fdl ansi command IC-101
- t1 framing command IC-93
- t1 linecode command IC-94
- t1 test command IC-96
- t1 timeslot command IC-93
- t1 yellow command IC-93
- T3
- (example) IC-135, IC-136
- BERT pattern IC-102
- cable length IC-92
- clock source IC-92
- configuring IC-92
- external port (example) IC-135
- external T1 channels IC-94
- FDL
- loopbacks IC-103
- support IC-101
- framing IC-92
- loopbacks IC-99
- MDL messages IC-101
- monitoring IC-100
- performance report IC-101
- performance report monitoring IC-101
- protocols supported IC-90
- standards IC-90
- T1
- clock source IC-93
- configuration IC-92
- framing IC-93
- line code IC-93
- loopbacks IC-97, IC-103
- test port IC-96
- troubleshooting IC-96
- Tab key
- command completion xxi
- telecommuting
- and asynchronous host roaming IC-160
- THT
- FDDI IC-41
- timers
- keepalive
- adjusting IC-7
- token
- holding IC-41
- rotation IC-41
- transmission valid IC-41
- timeslot command IC-88
- token holding timer
- See THT
- Token Ring
- concentrator port
- enabling IC-61
- monitoring IC-61
- encapsulation IC-59
- token rotation time
- See TRT
- transient ring error IC-41
- translational bridging
- on FDDI interface IC-40
- transmission timer
- FDDI IC-41
- transmission valid timer
- FDDI IC-41
- transmit clock
- inverting IC-86
- transmit-clock-internal command IC-85
- transmit delay, serial interface IC-86
- transmit-delay command IC-128
- transmitter-delay command IC-86
- transparent bridging
- FDDI interface IC-40
- transport protocol
- tunneling IC-155
- trap operations
- defining for hub ports IC-46
- TRT
- FDDI IC-41
- ts16 command IC-88
- tunnel checksum command IC-159
- tunnel command IC-160
- tunnel destination command IC-158, IC-159
- tunneling
- advantages IC-155
- AppleTalk
- definition IC-155
- GRE IC-159
- Cayman
- brief description IC-154
- no AT network address IC-159
- components IC-154
- destination address IC-158
- encapsulation IC-158
- EON IC-155
- GRE IC-154
- IP IC-155, IC-157
- NOS IC-155
- optional tasks IC-157
- precautions IC-156
- recursive route IC-157
- required tasks IC-157
- source address IC-158
- tunnel key command IC-159
- tunnel mode command IC-158, IC-159
- tunnel sequence-datagrams command IC-160
- tunnel source command IC-158, IC-159
- TVX
- FDDI IC-41
- tx-queue-limit command IC-8
- type code
- LAN Extender Interface IC-53
U
- UNI
- version 3.0 IC-71
- user EXEC mode
- summary xx
- User-Network Interface
- See UNI
- using line build-out commands IC-105
V
- VIP2-50 IC-89
- virtual interfaces
- See loopback interface; subinterfaces; tunneling
- VMS
- system
- loopback IC-20
W
- working interface
- APS IC-116
- write memory command IC-51
X
- X3T9.5 specification IC-41
Copyright 1989-2000
©
Cisco Systems Inc.
