Index: Cisco IOS Bridging and IBM Networking Command Reference, Volume II, Release 12.1
Symbols A C D E F G H I K L M N O P Q R S T U V
Symbols
- ? command x, xv
A
- abbreviating commands
- context-sensitive help ix, x, xv
- adapter command B2R-196
- allocate lu command B2R-304
C
- cautions
- usage in text ix
- CCO
- accessing x
- definition x
- Channel Interface Processor
- See CIP
- Channel Port Adapter
- See CPA
- channel-protocol command B2R-198
- CIP
- data rate
- PCA, configuring B2R-198
- Cisco Connection Online
- See CCO
- Cisco IOS
- saving configuration changes xviii
- Cisco Multipath Channel
- See CMPC
- Cisco Multipath Channel+
- See CMPC+
- Cisco SNA
- See CSNA
- CLAW
- backup groups
- displaying B2R-272
- configuring
- IP datagram B2R-256
- IP host backup group
- configuring B2R-256, B2R-259
- packing connections
- displaying B2R-273
- packing names
- displaying B2R-273
- packing statistics
- displaying B2R-275
- claw (backup) command B2R-259
- claw command B2R-256
- clear dbconn connection command B2R-148
- clear txconn connection command B2R-150
- clear txconn statistics command B2R-151
- clear txconn transaction command B2R-149
- client ip command B2R-306
- client ip lu command B2R-308
- client ip pool command B2R-310
- client lu maximum command B2R-312
- CMCC adapters
- channel interfaces
- hardware, displaying B2R-249
- physical, monitoring B2R-254
- shutting down B2R-253
- specifying B2R-203
- statistics, displaying B2R-235
- channel statistics
- displaying B2R-230
- CLAW
- configuring B2R-256, B2R-259
- CMPC
- configuring B2R-278, B2R-299
- subchannels, displaying B2R-285
- transmission groups, displaying B2R-291
- CMPC+
- configuring B2R-278, B2R-301
- subchannels, displaying B2R-285
- transmission groups, displaying B2R-291
- core dump
- enabling B2R-201
- CSNA
- configuring B2R-280
- subchannels, displaying B2R-287
- data rate
- parallel channel interfaces, configuring B2R-198
- DLUR
- configuring B2R-314
- DLUS backup
- configuring B2R-316
- ICMP stack
- displaying B2R-211
- internal adapters
- configuring B2R-196
- naming B2R-208
- VRN, configuring B2R-406
- internal LANs
- configuring B2R-205
- displaying B2R-217
- IP host backup
- offload devices, configuring B2R-267
- paths, configuring B2R-270
- IP stack
- displaying B2R-213
- LLC2 sessions
- displaying B2R-219
- maximum, displaying B2R-228
- maximum, specifying B2R-207
- SAPs, displaying B2R-210
- NN server
- TN3270 server, configuring B2R-344
- SAPs
- LLC2 sessions, displaying B2R-210
- sessions
- TN3270 server, configuring B2R-339
- TCP/IP offload
- configuring B2R-262, B2R-265
- TCP connections
- displaying B2R-240
- TCP stack
- displaying B2R-243
- TN3270 server
- configuring B2R-303 to B2R-407
- UDP listener sockets
- displaying B2R-246
- UDP stack
- displaying B2R-247
- CMPC
- LLC connections
- configuring B2R-299
- subchannels
- configuring B2R-278
- displaying B2R-285
- transmission groups
- configuring B2R-299
- displaying B2R-291
- CMPC+
- subchannels
- configuring B2R-278
- displaying B2R-285
- TG connection manager
- displaying B2R-283
- transmission groups
- configuring B2R-301
- displaying B2R-291
- cmpc command B2R-278
- command modes
- summary (table) xiv
- Common Link Access to Workstation
- See CLAW
- configuration, saving xviii
- CPA
- data rate
- PCPA, configuring B2R-198
- CSNA
- subchannels
- configuring B2R-280
- displaying B2R-287
- csna command B2R-280
D
- dbconn license command B2R-154
- dbconn ping command B2R-157
- dbconn server command B2R-158
- dbconn tcpserver command B2R-161
- default form of a command
- using xvii
- dependent logical unit requester
- See DLUR
- DLUR
- TN3270 server
- configuring B2R-314
- displaying B2R-363, B2R-367
- dlur command B2R-314
- DLUS backup
- TN3270 server
- configuring B2R-316
- dlus-backup command B2R-316
- downstream physical unit
- See DSPU
- DSPU
- activation request units
- defining B2R-2
- default PU
- defining B2R-3
- Ethernet
- host, defining B2R-17
- LSAP address, enabling B2R-8
- PUs, defining B2R-32
- upstream host B2R-5
- FDDI
- host, defining B2R-17
- LSAP address, enabling B2R-8
- PUs, defining B2R-32
- upstream host B2R-5
- Frame Relay
- host, defining B2R-11
- LSAP address, enabling B2R-8
- PUs, defining B2R-26
- upstream host B2R-5
- LAN
- naming B2R-51
- LU pools
- defining B2R-24
- LUs
- defining B2R-19
- inactivity timeout, specifying B2R-24
- monitoring B2R-52
- NCIA server
- configuring B2R-21
- PUs, defining B2R-32
- SAP, enabling B2R-22
- notification level
- specifying B2R-23
- PUs
- Ethernet, defining B2R-32
- FDDI, defining B2R-32
- NCIA server, defining B2R-32
- RSRB, defining B2R-32
- Token Ring, defining B2R-32
- VDLC, defining B2R-32
- QLLC
- host, defining B2R-13
- PUs, defining B2R-28
- upstream host B2R-6
- X.121 subaddress, enabling B2R-9
- RSRB
- defining B2R-35
- host, defining B2R-17
- PUs, defining B2R-32
- SAPs, enabling B2R-37, B2R-38
- starting B2R-39
- SAPs
- VDLC, enabling B2R-45, B2R-47
- SDLC
- address, enabling B2R-10
- host, defining B2R-15
- PUs, defining B2R-30
- upstream host B2R-7
- starting B2R-41
- Token Ring
- host, defining B2R-17
- LSAP address, enabling B2R-8
- PUs, defining B2R-32
- upstream host B2R-5
- VDLC
- defining B2R-43
- host, defining B2R-17
- PUs, defining B2R-32
- SAP, enabling B2R-45
- starting B2R-49
- dspu activation-window command B2R-2
- dspu default-pu command B2R-3
- dspu enable-host (QLLC) command B2R-6
- dspu enable-host (SDLC) command B2R-7
- dspu enable-host (Token Ring, Ethernet, FDDI, Frame Relay) command B2R-5
- dspu enable-pu (Ethernet, Frame Relay, Token Ring, FDDI) command B2R-8
- dspu enable-pu (SDLC) command B2R-10
- dspu host (Frame Relay) command B2R-11
- dspu host (QLLC) command B2R-13
- dspu host (SDLC) command B2R-15
- dspu host (Token Ring, Ethernet, FDDI, RSRB, VDLC) command B2R-17
- dspu lu command B2R-19
- dspu ncia command B2R-21
- dspu ncia enable-pu command B2R-22
- dspu notification-level command B2R-23
- dspu pool command B2R-24
- dspu pu (Frame Relay) command B2R-26
- dspu pu (QLLC) command B2R-28
- dspu pu (SDLC) command B2R-30
- dspu rsrb command B2R-35
- dspu rsrb enable-host command B2R-37
- dspu rsrb enable-pu command B2R-38
- dspu rsrb start command B2R-39
- dspu start command B2R-41
- dspu vdlc command B2R-43
- dspu vdlc enable-host command B2R-45
- dspu vdlc enable-pu command B2R-47
- dspu vdlc start command B2R-49
E
- Ethernet
- SNA service point
- defining B2R-64
- enabling B2R-57
- exception slot command B2R-201
F
- FDDI
- SNA service point
- defining B2R-64
- enabling B2R-57
- Fiber Distributed Data Interface
- See FDDI
- Frame Relay
- SNA service point
- defining B2R-58
- enabling B2R-57
G
- generic-pool command B2R-317
- global configuration mode
- summary xiv
H
- help command ix, x, xv
I
- ICMP stack
- CMCC adapters
- displaying B2R-211
- idle-time command B2R-319
- interface channel command B2R-203
- interface configuration mode
- summary xiv
- internal adapters
- CMCC adapters
- naming B2R-208
- VRN
- configuring B2R-406
- internal LANs
- CMCC adapters
- configuring B2R-205
- displaying B2R-217
- IP addresses
- CMCC adapters
- offload device B2R-265
- TN3270 server
- configuring B2R-330
- displaying B2R-369
- IP datagram
- CMCC adapters
- configuring B2R-256
- IP host backup
- CLAW
- configuring B2R-256, B2R-259
- CMCC adapters
- paths, configuring B2R-270
- TCP/IP offload B2R-262
- configuring B2R-267
- IP precedence
- TN3270 server
- configuring B2R-321
- ip precedence command B2R-321
- IP stack
- CMCC adapters
- displaying B2R-213
- IP TOS
- TN3270 server
- configuring B2R-323
- ip tos command B2R-323
K
- keepalive (TN3270) command B2R-325
L
- lan command B2R-205
- lan-name command B2R-51
- link (TN3270) command B2R-328
- listen-point command B2R-330
- LLC2 sessions
- CMCC adapters
- displaying B2R-219, B2R-228
- logical units
- See LUs
- lsap command B2R-333
- lu deletion command B2R-335
- LU nailing
- TN3270 server
- configuring B2R-308
- displaying B2R-369
- pools B2R-310
- LU pools
- assigning LUs B2R-304
- DSPU
- defining B2R-24
- TN3270 server
- configuring B2R-341
- displaying B2R-371
- nailing B2R-310
- LUs
- DSPU
- activation failure notification B2R-23
- dedicating to host B2R-19
- defining B2R-19
- inactivity timeout, specifying B2R-24
- pool assignment B2R-19
- state change notification B2R-23
- TN3270 server
- assigning B2R-304
- displaying B2R-371, B2R-377
- lu termination command B2R-337
M
- maximum-lus command B2R-339
- max-llc2-sessions command B2R-207
- modes
- See command modes
N
- name command B2R-208
- NN server
- TN3270 server
- configuring B2R-344
- no form of a command
- using xvii
- notes
- usage in text ix
O
- offload (backup) command B2R-267
- offload alias command B2R-265
- offload command B2R-262
- online documentation
- See CCO
P
- path command B2R-270
- physical channel interface monitoring B2R-254
- physical units
- See PUs
- pool command B2R-341
- preferred-nnserver command B2R-344
- privileged EXEC mode
- summary xiv
- prompts
- system xiv
- pu (listen-point) command B2R-347
- pu (TN3270) command B2R-349
- pu dlur (listen-point) command B2R-351
- PUs
- DSPU
- activation failure notification B2R-23
- Ethernet, defining B2R-32
- FDDI, defining B2R-32
- Frame Relay, defining B2R-26
- NCIA server, defining B2R-32
- QLLC, defining B2R-28
- RSRB, defining B2R-32
- SDLC, defining B2R-30
- state change notification B2R-23
- Token Ring, defining B2R-32
- VDLC, defining B2R-32
- TN3270 server
- configuring B2R-347, B2R-349
- displaying B2R-355, B2R-371
- DLUR, configuring B2R-351
Q
- QLLC
- SNA service point
- defining B2R-60
- enabling B2R-55
- Qualified Logical Link Control
- See QLLC
- question command xv
R
- remote source-route bridging
- See RSRB
- REPLY-PSID poweroff request
- TN3270 server
- configuring B2R-335
- response-time group command B2R-353
- response-time groups
- TN3270 server
- client subnet, configuring B2R-306
- displaying B2R-381, B2R-384, B2R-387, B2R-390, B2R-393
- ROM monitor mode
- summary xiv
- RSRB
- DSPU
- defining B2R-35
- starting B2R-39
- SNA service point
- defining B2R-64
- SAP, enabling B2R-67
- starting B2R-68
S
- SAPs
- DSPU
- NCIA server, enabling B2R-22
- RSRB, enabling B2R-37, B2R-38
- VDLC, enabling B2R-47
- SNA service point
- RSRB, enabling B2R-67
- TN3270 server
- configuring B2R-333
- saving configuration changes xviii
- SDLC
- SNA service point
- defining B2R-62
- enabling B2R-56
- Service Access Points
- See SAPs
- show dbconn connection command B2R-163
- show dbconn license command B2R-165
- show dbconn server command B2R-167
- show dspu command B2R-52
- show extended channel backup command B2R-272
- show extended channel cmgr command B2R-283
- show extended channel cmpc command B2R-285
- show extended channel connection-map llc2 command B2R-210
- show extended channel csna command B2R-287
- show extended channel icmp-stack command B2R-211
- show extended channel ip-stack command B2R-213
- show extended channel lan command B2R-217
- show extended channel llc2 command B2R-219
- show extended channel packing names command B2R-273
- show extended channel packing stats command B2R-275
- show extended channel statistics command B2R-230
- show extended channel subchannel command B2R-235
- show extended channel tcp-connections command B2R-240
- show extended channel tcp-stack command B2R-243
- show extended channel tg command B2R-291
- show extended channel tn3270-server client-ip-address command B2R-359
- show extended channel tn3270-server command B2R-355
- show extended channel tn3270-server dlur command B2R-363
- show extended channel tn3270-server dlurlink command B2R-367
- show extended channel tn3270-server nailed-ip command B2R-369
- show extended channel tn3270-server pu command B2R-371
- show extended channel tn3270-server pu lu command B2R-377
- show extended channel tn3270-server response-time application command B2R-381
- show extended channel tn3270-server response-time global command B2R-384
- show extended channel tn3270-server response-time link command B2R-387
- show extended channel tn3270-server response-time listen-point command B2R-390
- show extended channel tn3270-server response-time subnet command B2R-393
- show extended channel udp-listeners command B2R-246
- show extended channel udp-stack command B2R-247
- show extended max-llc2-sessions command B2R-228
- show interfaces channel command B2R-249
- show sna command B2R-54
- show snasw class-of-service command B2R-78
- show snasw connection-network command B2R-80
- show snasw directory command B2R-82
- show snasw dlctrace command B2R-84
- show snasw dlus command B2R-86
- show snasw ipstrace command B2R-88
- show snasw link command B2R-90
- show snasw lu command B2R-92
- show snasw mode command B2R-94
- show snasw node command B2R-95
- show snasw pdlog command B2R-97
- show snasw port command B2R-99
- show snasw pu command B2R-101
- show snasw rtp command B2R-103
- show snasw session command B2R-105
- show snasw statistics command B2R-107
- show snasw summary-ipstrace command B2R-109
- show snasw topology command B2R-111
- show txconn destination command B2R-174
- show txconn license command B2R-175
- show txconn route command B2R-176
- show txconn server command B2R-177
- show txconn statistics command B2R-180
- show txconn transaction command B2R-183
- shutdown (CMCC) command B2R-253
- shutdown (TN3270) command B2R-397
- Simple Network Management Protocol
- See SNMP
- SNA
- DSPU notification
- specifying B2R-23
- RSRB
- configuring B2R-66
- session switching
- TN3270 server, configuring B2R-314, B2R-333, B2R-406
- TN3270 server, displaying B2R-363, B2R-367
- sna enable-host (QLLC) command B2R-55
- sna enable-host (SDLC) command B2R-56
- sna enable-host (Token Ring, Ethernet, Frame Relay, FDDI) command B2R-57
- sna host (Frame Relay) command B2R-58
- sna host (QLLC) command B2R-60
- sna host (SDLC) command B2R-62
- sna host (Token Ring, Ethernet, FDDI, RSRB, VDLC) command B2R-64
- sna rsrb command B2R-66
- sna rsrb enable-host command B2R-67
- sna rsrb start command B2R-68
- SNA service point
- Ethernet
- defining B2R-64
- enabling B2R-57
- FDDI
- defining B2R-64
- enabling B2R-57
- Frame Relay
- defining B2R-58
- enabling B2R-57
- monitoring B2R-54
- QLLC
- defining B2R-60
- enabling B2R-55
- RSRB
- defining B2R-64
- SAP, enabling B2R-67
- starting B2R-68
- SDLC
- defining B2R-62
- enabling B2R-56
- starting B2R-69
- Token Ring
- defining B2R-64
- enabling B2R-57
- VDLC
- defining B2R-64, B2R-70
- SAP, enabling B2R-72
- starting B2R-73
- sna start command B2R-69
- snasw cpname command B2R-113
- snasw dlcfilter command B2R-115
- snasw dlctrace command B2R-117
- snasw dlus command B2R-119
- snasw dump command B2R-121
- snasw event command B2R-123
- snasw ipsfilter command B2R-124
- snasw ipstrace command B2R-126
- snasw link command B2R-128
- snasw location command B2R-130
- snasw pathswitch command B2R-132
- snasw pdlog command B2R-133
- snasw port command B2R-135
- snasw start command B2R-137
- snasw start cp-cp command B2R-138
- snasw start link command B2R-139
- snasw start port command B2R-140
- snasw stop command B2R-141
- snasw stop cp-cp command B2R-142
- snasw stop link command B2R-143
- snasw stop port command B2R-144
- snasw stop session command B2R-145
- sna vdlc command B2R-70
- sna vdlc enable-host command B2R-72
- sna vdlc start command B2R-73
- SNMP
- DSPU notification
- specifying B2R-23
- state-tracks-signal command B2R-254
- subinterface configuration mode
- summary xiv
- Synchronous Data Link Control
- See SDLC
- Systems Network Architecture
- See SNA
T
- Tab key
- command completion xv
- TCP/IP offload
- backup groups
- displaying B2R-272
- configuring B2R-262
- IP addresses
- configuring B2R-265
- TCP connections
- CMCC adapters
- displaying B2R-240
- TCP port
- TN3270 server
- configuring B2R-399
- tcp-port command B2R-399
- TCP stack
- CMCC adapters
- displaying B2R-243
- Telnet nops
- TN3270 server
- configuring B2R-325
- TERMSELF request
- TN3270 server
- configuring B2R-337
- tg command B2R-299, B2R-301
- TG connection manager
- CMPC+
- displaying B2R-283
- timing-mark command B2R-402
- timing marks
- TN3270 server
- configuring B2R-325, B2R-402
- TN3270 server
- clients
- displaying B2R-359
- configuration
- displaying B2R-355
- configuration mode
- entering B2R-401
- DLUR
- configuring B2R-314
- displaying B2R-363, B2R-367
- DLUS backup
- configuring B2R-316
- generic pool
- LUs, configuring B2R-317
- host link
- configuring B2R-328
- idle time
- configuring B2R-319
- IP addresses
- configuring B2R-330
- displaying B2R-369
- IP precedence
- configuring B2R-321
- IP TOS
- configuring B2R-323
- listen points
- configuring B2R-330
- LU deletion
- configuring B2R-335
- LU nailing
- configuring B2R-308
- displaying B2R-369
- pools, configuring B2R-310
- LU pools
- assigning LUs B2R-304
- clients, nailing B2R-310
- configuring B2R-341
- displaying B2R-371
- LUs
- displaying B2R-371, B2R-377
- LU sessions
- limiting, per client B2R-312
- LU termination
- configuring B2R-337
- PUs
- direct, configuring B2R-347, B2R-349
- displaying B2R-355, B2R-371
- DLUR, configuring B2R-351
- response-time groups
- client subnet, configuring B2R-306
- configuring B2R-353
- displaying B2R-381, B2R-384, B2R-387, B2R-390, B2R-393
- SAPs
- configuring B2R-333
- session disconnection
- idle time, configuring B2R-319
- session maximum
- configuring B2R-339
- session termination
- configuring B2R-335, B2R-337
- shutting down B2R-397
- SNA session switch
- configuring B2R-314, B2R-406
- displaying B2R-363, B2R-367
- starting B2R-401
- TCP port
- configuring B2R-399
- Telnet nops
- configuring B2R-325
- timing marks
- configuring B2R-325, B2R-402
- UNBIND request
- configuring B2R-404
- tn3270-server command B2R-401
- Token Ring
- SNA service point
- defining B2R-64
- enabling B2R-57
- txconn destination command B2R-186
- txconn license command B2R-188
- txconn ping destination command B2R-190
- txconn route command B2R-191
- txconn server command B2R-192
U
- UDP listener sockets
- CMCC adapters
- displaying B2R-246
- UDP stack
- CMCC adapters
- displaying B2R-247
- unbind-action command B2R-404
- UNBIND request
- TN3270 server
- configuring B2R-337
- UNBIND response
- TN3270 server
- configuring B2R-404
- user EXEC mode
- summary xiv
V
- VDLC
- DSPU
- defining B2R-43
- SAPs, enabling B2R-45, B2R-47
- starting B2R-49
- SNA service point
- defining B2R-64, B2R-70
- SAP, enabling B2R-72
- starting B2R-73
- Virtual Data Link Control
- See VDLC
- vrn command B2R-406
Copyright 1989-1999
©
Cisco Systems Inc.
