Index: Cisco IOS Bridging and IBM Networking Command Reference, Volume 1, Release 12.1
Symbols A B C D E F G H I L M N O P Q R S T U V X
Symbols
- ? command x, xv
A
- abbreviating commands
- context-sensitive help ix, x, xv
- access-expression command B1R-90
- access expressions
- configuring B1R-90
- access-list (extended-ibm) command B1R-4
- access-list (standard-ibm) command B1R-7
- access-list (type-code-ibm) command B1R-8
- access-list command B1R-92
- access lists
- bridging (table) B1R-579
- IBM NetBIOS
- byte offset B1R-193
- LSAP
- using in access expressions B1R-90
- MAC address
- configuring B1R-7
- netbios-host B1R-91
- SNAP type
- using in access expressions B1R-90
- SRB
- configuring B1R-92
- Ethernet type codes (table) B1R-579
- filtering by protocol type B1R-92
- transparent bridging
- assigning to bridge group B1R-33
- assigning to interface B1R-29, B1R-33
- associating with interface and bridge group B1R-41
- extended, configuring B1R-4
- filtering MAC addresses B1R-36
- qualifications for using B1R-5
- type codes
- configuring B1R-8
- Ethernet (table) B1R-579
- administrative filtering
- statically configured stations B1R-10
- ADT Security Systems
- primary end of link
- specifying B1R-334
- agent set control unit
- See ALPS, ASCU
- Airline Product Set
- See ALPS
- all-routes explorer packets
- definition B1R-199
- ALPS
- alarms
- ASCU B1R-535
- circuits B1R-536
- peer B1R-537
- ASCU
- displaying status B1R-573
- logical address B1R-530
- physical address B1R-531
- poll B1R-538
- circuit
- activating B1R-533, B1R-539
- deactivating B1R-569
- default B1R-534
- definition B1R-532
- disabling B1R-545
- displaying status B1R-574
- message queue B1R-547
- remote CPE B1R-532
- counters B1R-570
- error message display B1R-540
- error states B1R-553, B1R-560
- HLD definition B1R-548
- IP address B1R-549
- messages B1R-551
- multiplexing B1R-552
- P1024B protocol B1R-571
- peer
- alarms B1R-537
- displaying status B1R-575
- partner CPE B1R-558
- TCP B1R-557
- polls
- intervals B1R-556
- limits B1R-564
- minimum requirement B1R-554
- service messages
- content B1R-563
- intervals B1R-561
- lists B1R-562
- TCP
- peers B1R-546, B1R-557
- timeouts B1R-565, B1R-566
- X.121 address B1R-567
- X.25 interface B1R-541
- X.25 virtual circuit B1R-543
- alps a1-map a2-map command B1R-530
- alps ascu command B1R-531
- alps circuit command B1R-532
- alps connection-type permanent command B1R-533
- alps default-circuit command B1R-534
- alps enable-alarms ascu command B1R-535
- alps enable-alarms circuit command B1R-536
- alps enable-alarms peer command B1R-537
- alps enable-ascu command B1R-538
- alps enable-circuit command B1R-539
- alps error-display command B1R-540
- alps host-hld host-link command B1R-541
- alps hostlink command B1R-543
- alps idle-timer command B1R-545
- alps keepalive command B1R-546
- alps lifetime-timer command B1R-547
- alps local-hld remote-hld command B1R-548
- alps local-peer command B1R-549
- alps matip-close-delay command B1R-550
- alps max-msg-length command B1R-551
- alps mpx command B1R-552
- alps n1 command B1R-553
- alps n2 command B1R-554
- alps n3 command B1R-555
- alps poll-pause command B1R-556
- alps primary-peer command B1R-557
- alps remote-peer command B1R-558
- alps retry-option command B1R-560
- alps service-msg-interval command B1R-561
- alps service-msg-list command B1R-562
- alps service-msg-list number command B1R-563
- alps servlim command B1R-564
- alps t1 command B1R-565
- alps t2 command B1R-566
- alps translate command B1R-567
- alps update-circuit command B1R-568
- asp addr-offset command B1R-332
- asp role command B1R-334
- asp rx-ift command B1R-335
- autonomous bridging
- ciscoBus II
- enabling B1R-26
- autonomous switching
- SRB
- enabling B1R-193
B
- Binary Synchronous Communications
- See BSC
- Block Serial Tunneling
- See BSTUN
- bridge acquire command B1R-10
- bridge address command B1R-11
- bridge bridge command B1R-13, B1R-14
- bridge circuit-group pause command B1R-16
- bridge circuit-group source-based command B1R-17
- bridge cmf command B1R-18
- bridge crb command B1R-19
- bridge domain command B1R-20
- bridge forwarding database
- entry classes
- viewing B1R-67
- bridge forward-time command B1R-22
- bridge-group aging-time command B1R-25
- bridge-group cbus-bridging command B1R-26
- bridge-group circuit-group command B1R-28
- bridge-group command B1R-23
- bridge-group input-address-list command B1R-29
- bridge-group input-lat-service-deny command B1R-30
- bridge-group input-lat-service-permit command B1R-31
- bridge-group input-lsap-list command B1R-32
- bridge-group input-pattern-list command B1R-33
- bridge-group input-type-list command B1R-34
- bridge-group lat-compression command B1R-35
- bridge-group output-address-list command B1R-36
- bridge-group output-lat-service-deny command B1R-37
- bridge-group output-lat-service-permit command B1R-38
- bridge-group output-lsap-list command B1R-39
- bridge-group output-pattern-list command B1R-41
- bridge-group output-type-list command B1R-42
- bridge-group path-cost command B1R-43
- bridge-group priority command B1R-44
- bridge groups
- interface assignment
- bridge group numbers B1R-23
- circuit groups B1R-28
- source MAC address B1R-17
- bridge-group spanning-disabled command B1R-46
- bridge-group sse command B1R-48
- bridge-group virtual interface
- See BVI
- bridge hello-time command B1R-50
- bridge irb command B1R-51
- bridge lat-service-filtering command B1R-52
- bridge max-age command B1R-53
- bridge multicast-source command B1R-54
- bridge priority command B1R-55
- bridge protocol command B1R-56
- bridge protocol data units
- intervals between hello B1R-50
- bridge protocol ibm command B1R-94
- bridge route command B1R-58
- bridges
- global information
- displaying B1R-153
- logical configuration
- displaying B1R-154
- BSC
- character set
- configuring B1R-337
- contention interfaces
- addresses, specifying B1R-338
- idle timeout, configuring B1R-339
- device retries B1R-344
- link
- secondary end B1R-345
- polling cycle interval B1R-341
- poll-list cycles
- number, specifying B1R-346
- poll timeout B1R-342
- primary end of link B1R-343
- specific polls
- configuring B1R-347
- bsc char-set command B1R-337
- bsc-char-set command B1R-337
- bsc contention command B1R-338
- bsc dial-contention command B1R-339
- bsc host-timeout command B1R-340
- bsc pause command B1R-341
- bsc poll-timeout command B1R-342
- bsc primary command B1R-343
- bsc retries command B1R-344
- bsc secondary command B1R-345
- bsc servlim command B1R-346
- bsc spec-poll command B1R-347
- BSTUN
- custom queuing
- BSTUN header B1R-367
- TCP port B1R-368
- Frame Relay B1R-494
- frames, forwarding B1R-357
- frames
- specifying B1R-355
- group
- specifying B1R-348
- interface
- enabling B1R-358
- peers
- specifying B1R-351
- protocol group
- specifying B1R-352
- bstun group command B1R-348
- bstun keepalive-count command B1R-349
- bstun lisnsap command B1R-350
- bstun peer-name command B1R-351
- bstun protocol-group command B1R-352
- bstun route (Frame Relay) command B1R-357
- bstun route command B1R-355, B1R-357
- BVI
- configuring B1R-66
C
- cautions
- usage in text ix
- CCO
- accessing x
- definition x
- ciscoBus II
- autonomous bridging
- enabling B1R-26
- Cisco Connection Online
- See CCO
- Cisco IOS
- saving configuration changes xviii
- clear alps circuits command B1R-569
- clear alps counters command B1R-570
- clear bridge command B1R-61
- clear bridge multicast command B1R-62
- clear dlsw circuit command B1R-250
- clear dlsw reachability command B1R-251
- clear dlsw statistics command B1R-252
- clear drip command B1R-206, B1R-212
- clear ncia circuit command B1R-514
- clear ncia client command B1R-515
- clear ncia client registered command B1R-516
- clear netbios-cache command B1R-95
- clear rif-cache command B1R-96
- clear source-bridge command B1R-97
- clear sse command B1R-98
- clear vlan statistics command B1R-64
- command modes
- summary (table) xiv
- compression
- LAT packets
- configuring B1R-35
- X.25
- packet-by-packet B1R-87, B1R-488
- concurrent routing and bridging
- enabling B1R-19
- configuration
- saving xviii
- constrained multicast flooding
- enabling B1R-18
- multicast state information
- clearing B1R-62
- displaying B1R-73
- cost
- modifying default for transparent bridging B1R-43
D
- data-link switching plus
- See DLSw+
- DEC Spanning-Tree Protocol
- specifying B1R-56
- default form of a command
- using xvii
- direct encapsulation
- SRB
- configuring B1R-242, B1R-484
- DLSw+
- configuring service access points B1R-263
- duplicate MAC addresses B1R-260
- fault-tolerance B1R-260
- load-balancing B1R-260
- local peer
- defining B1R-269
- QLLC
- PVC, configuring B1R-491
- static MAC address
- configuring B1R-271
- static NetBIOS name
- configuring B1R-275
- dlsw allroute-netbios command B1R-253
- dlsw allroute-sna command B1R-254
- dlsw bgroup-list command B1R-255
- dlsw bridge-group command B1R-256
- dlsw cache-ignore-netbios-datagram command B1R-258
- dlsw disable command B1R-259
- dlsw duplicate-path-bias command B1R-260
- dlsw group cache disable command B1R-261
- dlsw group-cache max entries command B1R-262
- dlsw icannotreach saps command B1R-263
- dlsw icanreach command B1R-264
- dlsw llc2 nornr command B1R-266
- dlsw load-balance command B1R-268
- dlsw local-peer command B1R-269
- dlsw mac-addr command B1R-271
- dlsw netbios-keepalive-filter command B1R-274
- dlsw netbios-name command B1R-275
- dlsw peer-on-demand-defaults command B1R-277
- dlsw port-list command B1R-280
- dlsw prom-peer-defaults command B1R-281
- dlsw redundant-rings command B1R-283
- dlsw remote-peer frame relay command B1R-284
- dlsw remote-peer fst command B1R-287
- dlsw remote-peer interface command B1R-290
- dlsw remote-peer tcp command B1R-293
- dlsw ring-list command B1R-298
- dlsw rsvp command B1R-299
- dlsw timer command B1R-301
- dlsw transparent map command B1R-307
- dlsw transparent redundancy-enable command B1R-308
- dlsw transparent switch-support command B1R-309
- dlsw transparent timers command B1R-310
- dlsw udp-disable command B1R-304, B1R-305, B1R-311
- domain, assigning B1R-20
- DRiP
- clearing B1R-206, B1R-212
- displaying B1R-209, B1R-216
- duplicate ring protocol
- See DRiP
E
- encapsulation alc command B1R-571
- encapsulation bstun command B1R-358
- encapsulation sdlc command B1R-400
- encapsulation sdlc-primary command B1R-401
- encapsulation sdlc-secondary command B1R-403
- encapsulation stun command B1R-359
- encapsulation tr-isl command B1R-207
- encapsulation uts command B1R-572
- Ethernet
- 0x80d5 format, enabling use of B1R-173
- encapsulated packets
- filtering on input B1R-34
- filtering on output B1R-42
- ethernet-transit-oui command B1R-99
- Ethernet type codes
- (table) B1R-579
- exchange identification
- See XID
- explorers
- all-routes
- forwarding or blocking B1R-182
- spanning-tree
- enabling B1R-198, B1R-199
- forwarding or blocking B1R-183, B1R-184
F
- Fast-Sequenced Transport
- See FST
- fast-switched SR/TLB
- disabling B1R-202
- fast switching
- SRB B1R-192
- SSE B1R-195
- transport
- configuring B1R-237
- FID4 frames
- enabling reading B1R-236
- filtering
- protocol type
- Ethernet type codes (table) B1R-579
- format indicator 4 frames,
- See FID4 frames
- forward delay interval
- configuring B1R-22
- forwarding database
- clearing B1R-61
- Frame Rejects
- See FRMRs
- Frame Relay
- bridging over B1R-65
- Frame Relay Access Support
- See FRAS
- frame-relay map bridge broadcast command B1R-65
- frame-relay map bstun command B1R-361
- frame-relay map llc2 command B1R-494
- frame-relay map rsrb command B1R-495
- frames
- forwarding B1R-10, B1R-54
- maximum size on source-route bridge B1R-239, B1R-242, B1R-244, B1R-246, B1R-484
- using bridge address to filter B1R-11
- FRAS
- BAN
- configuring B1R-498
- displaying status B1R-508
- enabling B1R-501
- BNN
- displaying status B1R-508
- DLCI, LLC connection B1R-504
- enabling B1R-502
- LLC connection, associating B1R-504
- congestion
- managing B1R-507
- connection state
- displaying status B1R-508, B1R-512
- dial backup over DLSw+
- displaying status B1R-508
- enabling B1R-496
- DLCI
- backup, configuring B1R-500
- SDLC link, associating B1R-505
- host
- LLC2 local termination B1R-503
- LLC2
- local termination B1R-503
- sessions, displaying status B1R-510
- mapping
- displaying status B1R-512
- RSRB
- DLCI number B1R-495
- SDLC
- link, associating B1R-505
- fras backup dlsw command B1R-496
- fras ban command B1R-498
- fras ddr-backup command B1R-500
- fras-host ban command B1R-501
- fras-host bnn command B1R-502
- fras-host dlsw-local-ack command B1R-503
- fras map llc command B1R-504
- fras map sdlc command B1R-505
- FRMRs
- SDLC
- configuring B1R-424
- FST
- configuring B1R-237, B1R-244
G
- global configuration mode
- summary xiv
- group codes
- access
- denying B1R-30, B1R-37
- permitting B1R-31, B1R-38
H
- HDLC
- encapsulation
- enabling B1R-393
- traffic
- forwarding B1R-390
- hello BPDUs
- specifying intervals B1R-50
- help command ix, x, xv
- High-Level Data Link Control
- See HDLC
I
- idle interval
- changing B1R-53
- IEEE 802-encapsulated packets
- assigning an access list to filter on input B1R-180
- assigning an access list to filter on output B1R-186
- filtering on input B1R-32
- filtering on output B1R-39
- IEEE Spanning-Tree Protocol
- specifying B1R-56
- See also spanning-tree, protocol
- I-frames
- LLC2
- size limitations B1R-471
- integrated routing and bridging
- bridge group
- protocol, enabling B1R-14
- BVI
- configuring B1R-66
- configuration
- displaying B1R-78
- enabling B1R-51
- interface bvi command B1R-66
- interface configuration mode
- summary xiv
- interfaces
- placing in STUN group B1R-380
- STUN frames
- forwarding B1R-389, B1R-390, B1R-391
- Token Ring B1R-506
- interface virtual-tokenring command B1R-506
L
- LAN Network Manager
- See LNM
- LAT
- compression
- configuring B1R-35
- serial interfaces B1R-35
- group code filtering
- configuring B1R-52
- service groups
- filtering B1R-30
- permitting access based on B1R-31
- LLC2
- acknowledgment
- wait interval, configuring B1R-405
- CMNS support B1R-399
- connection information
- displaying B1R-450
- local acknowledgment
- COS, enabling B1R-236
- SNA traffic prioritization, enabling B1R-236
- polling frequency
- configuring B1R-409
- retry count B1R-411
- XID
- transmission frequency, configuring B1R-418
- llc2 ack-delay-time command B1R-405
- llc2 ack-max command B1R-407
- llc2 dynwind command B1R-507
- llc2 idle-time command B1R-409
- llc2 local-window command B1R-410
- llc2 n2 command B1R-411
- llc2 t1-time command B1R-413
- llc2 tbusy-time command B1R-414
- llc2 tpf-time command B1R-415
- llc2 trej-time command B1R-417
- llc2 xid-neg-val-time command B1R-418
- llc2 xid-retry-time command B1R-419
- LNM
- configuration report server B1R-104
- interfaces
- displaying B1R-156
- passwords
- configuring B1R-108
- ring error monitor B1R-111
- ring parameter server B1R-112
- stations
- displaying B1R-160
- Token Ring
- displaying B1R-159
- lnm alternate command B1R-102
- lnm crs command B1R-104, B1R-105, B1R-110
- lnm express-buffer command B1R-106
- lnm loss-threshold command B1R-107
- lnm password command B1R-108
- lnm rem command B1R-111
- lnm rps command B1R-112
- lnm snmp-only command B1R-113
- lnm softerr command B1R-114
- locaddr-priority command B1R-222
- locaddr-priority-list command B1R-224
- local acknowledgment
- LLC2 B1R-246
- SDLLC connections
- enabling B1R-486
- state
- displaying B1R-481
- local-area transport
- See LAT
- Logical Link Control, type 2
- See LLC2
- LU address
- logical units
- queuing priorities, configuring B1R-224
- priority list
- specifying B1R-227
M
- mac-address command B1R-115
- modes
- See command modes
- multicast source addresses
- configuring bridging support for B1R-54
- multiring all command B1R-117
- multiring command B1R-116
- multiring trcrf-vlan command B1R-208, B1R-214
N
- name caching
- enabling for NetBIOS B1R-122
- Native Client Interface Architecture
- See NCIA
- NCIA
- circuits
- clearing B1R-514
- status information, displaying B1R-524
- client
- active connection, terminating B1R-515
- configuring B1R-518
- status information, displaying B1R-526
- registered client control block
- releasing B1R-516
- server
- configuring B1R-522
- RSRB ring, configuring B1R-520
- starting and stopping B1R-517
- status information, displaying B1R-528
- ncia client command B1R-518
- ncia command B1R-517
- ncia rsrb command B1R-520
- ncia server command B1R-522
- NetBIOS
- access list filter
- assigning to interface B1R-123, B1R-124
- outgoing messages, defining B1R-134, B1R-135
- byte offsets
- access lists B1R-193
- configuring B1R-118
- cache
- entries, displaying B1R-162
- clearing dynamically learned names B1R-95
- name caching
- dead time, configuring B1R-131, B1R-132
- enabling B1R-122, B1R-133
- netbios access-list bytes command B1R-118
- netbios access-list host command B1R-120
- netbios enable-name-cache command B1R-122
- netbios input-access-filter bytes command B1R-123
- netbios input-access-filter host command B1R-124
- netbios name-cache command B1R-125
- netbios name-cache name-len command B1R-127
- netbios name-cache proxy-datagram command B1R-129
- netbios name-cache query-timeout command B1R-131
- netbios name-cache recognized-timeout command B1R-132
- netbios name-cache timeout command B1R-133
- netbios output-access-filter bytes command B1R-134
- netbios output-access-filter host command B1R-135
- no form of a command
- using xvii
- notes
- usage in text ix
O
- online documentation
- See CCO
- OSPF
- broadcasts
- over X.25 B1R-87, B1R-488
- OUI
- 90-compatible form B1R-99
- Cisco form B1R-99
- standard form
- specifying B1R-99
- translational bridges
- code, configuring B1R-99
P
- P1024B protocol B1R-571
- packet compression
- X.25 B1R-87, B1R-488
- passwords
- LNM
- configuring B1R-108
- paths
- source-route bridging
- cost, modifying B1R-198
- transparent bridging
- cost, modifying B1R-43
- poll bit
- LLC2
- sending B1R-415
- primary SDLC station
- configuring B1R-401
- priority-list command B1R-222, B1R-227
- priority-list protocol bstun command B1R-362
- priority-list protocol ip tcp command B1R-363
- priority-list stun address command B1R-365
- privileged EXEC mode
- summary xiv
- prompts
- system xiv
- protocol groups
- STUN
- creating B1R-384
- proxy explorers
- configuring B1R-188
- NetBIOS name caching
- enabling B1R-122
Q
- QLLC
- configured for DLSw B1R-487, B1R-491
- qllc accept-all-calls command B1R-456
- qllc dlsw command B1R-312
- qllc npsi-poll command B1R-459
- qllc partner command B1R-461
- qllc sap command B1R-463
- qllc srb command B1R-465
- qllc xid command B1R-467
- Qualified Logical Link Control
- See QLLC
- question command xv
- queue-list protocol bstun command B1R-367
- queue-list protocol ip tcp command B1R-368
- queuing priorities
- BSTUN
- based on header B1R-362
- based on TCP port B1R-363
- configuring B1R-224, B1R-227
- STUN
- based on address B1R-365
- based on a TCP port B1R-363
R
- receiver not ready frames
- See RNR frames
- receiver ready frames
- See RR frames
- Recognized Operating Agencies
- See X.25, ROA lists
- Recognized Operating Agencies lists
- See ROA lists
- reject timer B1R-417
- remote peer
- specifying frame size B1R-244, B1R-246
- remote source-route bridging
- See RSRB
- reporting link number
- threshold
- specifying B1R-102
- retry count
- LLC2 B1R-411
- RFC 1045
- Ethernet type code for Versatile Message Translation Protocol B1R-581
- RFC 1356
- Multiprotocol Interconnect on X.25 and ISDN in the Packet Mode B1R-87, B1R-488
- RFC 877
- Standard for the transmission of IP datagrams over public data B1R-87, B1R-488
- RIF
- cache contents
- displaying B1R-164
- enabling B1R-208, B1R-214
- information collection
- enabling B1R-116
- ring groups
- establishing B1R-136
- routed protocols B1R-116
- static information
- entering B1R-136
- rif command B1R-136
- rif timeout command B1R-138
- rif validate-age command B1R-139
- rif validate-enable-age command B1R-142
- rif validate-enable command B1R-140
- rif validate-enable-route-cache command B1R-143
- ring error monitor
- LNM B1R-111
- ring parameter server
- LNM B1R-112
- RNR frames B1R-414
- ROA lists B1R-88, B1R-489
- ROM monitor mode
- summary xiv
- root bridge
- configuring B1R-55
- routing
- and bridging, concurrent B1R-19
- and bridging, integrated B1R-51
- routing information field
- See RIF
- RR frames B1R-409, B1R-414
- RSRB
- backup queue
- size, modifying B1R-248
- FRAS
- DLCI number B1R-495
- transport methods
- combining B1R-243, B1R-484
- rsrb remote-peer lsap-output-list command B1R-229
- rsrb remote-peer netbios-output-list command B1R-230
S
- sap-priority command B1R-232
- sap-priority-list command B1R-233
- saving configuration changes xviii
- SDLC
- broadcast
- enabling B1R-370
- configuring routing device
- as a primary SDLC station B1R-401
- as a secondary SDLC station B1R-403
- frame size maximum
- configuring B1R-429
- local acknowledgment
- STUN, enabling B1R-391
- multidrop configuration B1R-440
- primary station
- configuring B1R-401
- secondary stations
- serial link, assigning B1R-420
- STUN
- local acknowledgment, enabling B1R-384
- T1 timer B1R-445
- sdlc address command B1R-420
- sdlc address FF ack-mode command B1R-422
- sdlc dlsw command B1R-314
- sdlc dte-timeout command B1R-423
- sdlc frmr-disable command B1R-424
- sdlc holdq command B1R-425
- sdlc k command B1R-427
- SDLC Logical Link Control
- See SDLLC
- sdlc n2 command B1R-430
- sdlc partner command B1R-431
- sdlc poll-limit-value command B1R-433
- sdlc poll-wait-timeout command B1R-437
- sdlc qllc-prtnr command B1R-439
- sdlc role command B1R-440
- sdlc simultaneous command B1R-443
- sdlc slow-poll command B1R-444
- sdlc t1 command B1R-445
- sdlc test serial command B1R-446
- sdlc virtual multidrop command B1R-370
- sdlc vmac command B1R-448
- sdlc xid command B1R-449
- SDLLC
- device-initiated connections
- enabling B1R-469
- enabling use of B1R-475
- local acknowledgment
- enabling B1R-486
- serial interfaces
- configuring B1R-475
- sdllc partner command B1R-469
- sdllc ring-largest-frame command B1R-471
- sdllc sap command B1R-473
- sdllc sdlc-largest-frame command B1R-474
- sdllc traddr command B1R-475
- sdllc xid command B1R-477
- secondary SDLC stations
- assigning to serial link B1R-420
- configuring routing device as a B1R-403
- serial interfaces
- LAT compression B1R-35
- show alps ascu command B1R-573
- show alps circuits command B1R-574
- show alps peers command B1R-575
- show apollo interface command B1R-437
- show bridge circuit group command B1R-70
- show bridge command B1R-67
- show bridge group command B1R-72
- show bridge multicast command B1R-73
- show bridge vlan command B1R-75
- show bsc command B1R-371
- show bstun command B1R-376
- show controllers token (IBM) command B1R-144
- show dlsw capabilities command B1R-315
- show dlsw circuits command B1R-317
- show dlsw fastcache command B1R-319
- show dlsw peers command B1R-320
- show dlsw reachability command B1R-324
- show dlsw statistics command B1R-327
- show dlsw transparent cache command B1R-328
- show dlsw transparent map command B1R-329
- show dlsw transparent neighbor command B1R-330
- show drip command B1R-209, B1R-216
- show fras command B1R-508
- show fras-host command B1R-510
- show fras map command B1R-512
- show interfaces crb command B1R-76
- show interfaces irb command B1R-78
- show interfaces tokenring (IBM) command B1R-149
- show llc2 command B1R-450
- show lnm bridge command B1R-153
- show lnm config command B1R-154
- show lnm interface command B1R-156
- show lnm ring command B1R-159
- show lnm station command B1R-160
- show local-ack command B1R-234, B1R-481
- show ncia circuits command B1R-524
- show ncia client command B1R-526
- show ncia server command B1R-528
- show netbios-cache command B1R-162
- show qllc command B1R-479
- show rif command B1R-164
- show source-bridge command B1R-166
- show span command B1R-169, B1R-173, B1R-196
- show spanning-tree command B1R-80
- show stun command B1R-378
- show vlans command B1R-84
- Silicon Switch Processor
- See SSP
- SNA
- traffic prioritization
- configuring B1R-236
- SNAP
- packet encapsulation
- input, filtering B1R-181
- output, filtering B1R-187
- type code, filtering B1R-187
- SNAP packet encapsulation
- filtering
- input B1R-34
- output B1R-42
- source-bridge command B1R-170
- source-bridge connection-timeout command B1R-172
- source-bridge cos-enable command B1R-236
- source-bridge enable-80d5 command B1R-173
- source-bridge explorer-dup-ARE-filter command B1R-175
- source-bridge explorer-fastswitch command B1R-176
- source-bridge explorer-maxrate command B1R-177
- source-bridge explorerq-depth command B1R-178
- source-bridge fst-peername command B1R-237
- source-bridge input-address-list command B1R-179
- source-bridge input-lsap-list command B1R-180
- source-bridge input-type-list command B1R-181
- source-bridge keepalive command B1R-238
- source-bridge largest-frame command B1R-239
- source-bridge max-hops command B1R-182
- source-bridge max-in-hops command B1R-183
- source-bridge max-out-hops command B1R-184
- source-bridge output-address-list command B1R-185
- source-bridge output-lsap-list command B1R-186
- source-bridge output-type-list command B1R-187
- source-bridge passthrough command B1R-240
- source-bridge proxy-explorer command B1R-188
- source-bridge proxy-netbios-only command B1R-189
- source-bridge qllc-local-ack command B1R-483
- source-bridge remote-peer frame-relay command (direct encapsulation) B1R-242
- source-bridge remote-peer fst command B1R-244
- source-bridge remote-peer interface command B1R-484
- source-bridge remote-peer tcp command B1R-246
- source-bridge ring-group command B1R-190
- source-bridge route-cache cbus command B1R-193
- source-bridge route-cache command B1R-192
- source-bridge route-cache sse command B1R-195
- source-bridge sap-80d5 command B1R-196
- source-bridge sdllc-local-ack command B1R-486
- source-bridge spanning (automatic) command B1R-198
- source-bridge spanning (manual) command B1R-199
- source-bridge tcp-queue-max command B1R-248
- source-bridge transparent command B1R-200
- source-bridge transparent fastswitch command B1R-202
- source-bridge trcrf-vlan command B1R-210, B1R-217
- source-route bridging
- See SRB
- source-route translational bridging
- See SR/TLB
- spanning explorer packets
- definition B1R-199
- spanning explorers
- enabling B1R-198
- spanning explorers, enabling B1R-199
- spanning tree
- domain
- assigning B1R-20
- multiple bridge loops with B1R-20
- protocol
- defining B1R-56
- disabling B1R-46
- SR/TLB
- enabling B1R-200
- fast-switching mode
- disabling B1R-202
- SRB
- access lists
- configuring B1R-92
- autonomous switching
- enabling B1R-193
- configuration
- displaying B1R-166
- connection timeout interval
- setting B1R-172
- explorer packets
- configuring B1R-199
- hop count
- maximum, configuring B1R-182, B1R-183, B1R-184
- Token Ring interface
- displaying B1R-149
- SSE fast switching
- SRB B1R-195
- transparent bridging B1R-48
- SSP
- reinitializing B1R-98
- STUN
- connection status
- displaying B1R-376, B1R-378
- frames
- forwarding B1R-389, B1R-390
- interface
- configuring B1R-359
- placing in a group B1R-380
- IP addresses
- enabling B1R-383
- non-SDLC protocol
- defining B1R-395
- peer connection B1R-382
- protocol groups
- creating B1R-384
- stun group command B1R-380
- stun keepalive-count command B1R-382
- stun peer-name command B1R-383
- stun protocol-group command B1R-384, B1R-386
- stun remote-peer-keepalive command B1R-388
- stun route address interface dlci command B1R-389
- stun route address interface serial command B1R-390
- stun route address tcp command B1R-391
- stun route all interface serial command B1R-393
- stun route all tcp command B1R-394, B1R-397
- stun schema offset length format command B1R-395
- stun sdlc-role primary command B1R-397
- stun sdlc-role secondary command B1R-398
- subinterface configuration mode
- summary xiv
- Subnetwork Access Protocol
- See SNAP
- See SNAP packet encapsulation
- Synchronous Data Link Control
- See SDLC
- Systems Network Architecture
- See SNA
T
- T1 timer
- SDLC B1R-445
- Tab key
- command completion xv
- TCP
- encapsulation
- SRB, configuring B1R-246
- STUN, configuring B1R-391
- STUN, enabling B1R-394
- Texas Instruments Token Ring MAC firmware
- known defect B1R-115
- TFTP
- port number B1R-227
- Token Ring
- acknowledgment wait interval
- configuring B1R-405
- controller
- displaying B1R-144
- interface
- displaying B1R-149
- LNM information
- displaying B1R-159
- logical configuration
- monitoring B1R-104
- polling frequency
- configuring B1R-409
- XID
- transmission frequency, configuring B1R-418
- Token Ring Inter-Switch Link
- See TRISL
- Transmission Control Protocol
- See TCP
- transparent bridging
- access lists
- extended, configuring B1R-4
- MAC address, configuring B1R-7
- type code, configuring B1R-8
- constrained multicast flooding
- enabling B1R-18
- multicast state information, clearing B1R-62
- multicast state information, displaying B1R-73
- interface restrictions B1R-23
- TRISL
- commands
- clear drip B1R-212
- multiring trcrf-vlan B1R-214
- source-bridge trcrf-vlan B1R-217
- DRiP
- clearing B1R-206
- RIF
- enabling B1R-208, B1R-214
- VLAN
- attaching B1R-217
- VLANs
- attaching B1R-210, B1R-217
- Trivial File Transfer Protocol
- See TFTP
U
- UDP
- common services B1R-227
- User Datagram Protocol
- See UDP
- user EXEC mode
- summary xiv
V
- virtual interfaces
- Token Ring
- creating B1R-506
- virtual LANs
- See VLANs
- virtual ring
- assigning B1R-200, B1R-202
- definition B1R-190
- VLANs
- monitoring B1R-84
X
- X.25
- compression
- packet-by-packet B1R-87, B1R-488
- directed broadcasts
- configuring B1R-87, B1R-488
- encapsulation
- methods supported B1R-87, B1R-488
- facilities supported B1R-488
- frames
- bridging packets B1R-86
- input packet size
- configuring B1R-88
- input packet size, setting with x25 map command B1R-489
- map options (table) B1R-488
- network user ID B1R-88, B1R-489
- OSPF B1R-87, B1R-488
- output packet size B1R-88, B1R-489
- ROA lists B1R-88, B1R-489
- user facilities
- accept reverse charging B1R-87, B1R-488
- closed user group B1R-87, B1R-488
- network user ID B1R-88, B1R-489
- reverse charging B1R-87, B1R-488
- ROA list name, specifying B1R-88, B1R-489
- throughput class negotiation B1R-88, B1R-489
- transit delay B1R-88, B1R-489
- virtual circuits
- setting number of B1R-87, B1R-488
- window size B1R-88, B1R-489
- x25 map bridge command B1R-86
- x25 map qllc command B1R-487
- x25 pvc qllc command B1R-491
- XID
- frames
- SDLC stations, configuring B1R-449
- transmission frequency, configuring B1R-418
- SDLC stations
- specifying B1R-477
Copyright 1989-2000
©
Cisco Systems Inc.
