Index: Cisco IOS Configuration Fundamentals Command Reference, Release 12.1
Symbols A B C D E F G H I K L M N O P Q R S T U V W X
- ! character
- ping command output FR-574
- # character
- privileged EXEC mode prompt FR-8
- . character
- ping command output FR-574
- /etc/printcap file
- modifying for printing FR-80
- > prompt FR-283
- ? command FR-xv
- 7-bit character set
- changing for session FR-105
- 8-bit character set
- EXEC and configuration commands
- changing for a session FR-94
- setting default value FR-58
- setting for line FR-67
- hardware databits
- changing for session FR-88
- configuring on a line FR-56
- software character bits
- changing for session FR-89
- setting for line FR-57
- special character width
- changing for session FR-105
- configuring default FR-59
- configuring for line FR-84
- abbreviating commands
- context-sensitive help FR-xv
- software recognition FR-3
- absolute command FR-668
- absolute-timeout command FR-76
- access lists
- IP
- time-based FR-668, FR-710
- IPX
- time-range FR-746
- activation character
- setting FR-54
- activation-character command FR-54
- alias command FR-670
- aliases
- creating for commands FR-670
- default FR-670
- displaying FR-726
- ASCII
- activation character FR-54
- character
- widths FR-84, FR-105
- character set
- (table) FR-859
- disconnect character FR-60
- dispatch character FR-61, FR-90
- escape character FR-66, FR-93
- hold character FR-69, FR-96
- padding FR-78, FR-101
- start character FR-107
- stop character FR-109
- async-bootp command FR-322
- attach command FR-536
- attach shelf command FR-750
- autobaud command FR-55
- banner exec command FR-122
- banner incoming command FR-124
- banner login command FR-125
- banner motd command FR-127
- banners
- disabling on a line FR-122, FR-125, FR-149
- enabling on a line FR-122, FR-125, FR-149
- EXEC, displaying FR-122
- for reverse Telnet lines FR-124
- incoming message FR-124
- line number FR-154
- login FR-125
- MOTD FR-127
- using to announce system shutdown FR-127
- See also messages
- baud rate
- receive, changing for session FR-104
- See also line speed
- boot bootldr command FR-286
- boot bootstrap command FR-288
- boot buffersize command FR-215
- boot command FR-282
- boot config command FR-216
- BOOT environment variable
- rearranging order of entries FR-292
- specifying FR-290, FR-293
- boot field
- bit settings, listing FR-300
- default values, changing FR-295, FR-297
- boot host command FR-218
- booting
- from Flash FR-290
- checksum values, MOP FR-175
- from network server FR-282
- (example) FR-284
- manually from Flash FR-282
- system software, configuration register FR-295, FR-297
- BOOTLDR environment variable, specifying FR-286
- boot network command FR-220
- boot register FR-295, FR-297
- bootstrap image
- backing up on a server FR-174
- secondary FR-288
- boot system command FR-290
- Break key FR-293
- buckets-of-history-kept command FR-460
- buffers
- character, for terminal sessions FR-61, FR-64
- command history
- changing for session FR-41
- setting for a line FR-17, FR-19
- configuration file, changing size FR-215
- interface buffer pool tuning FR-674
- management parameters FR-673, FR-675
- message logging to internal FR-556
- public buffer pool tuning FR-674
- size, setting FR-673, FR-675
- statistics, displaying FR-727
- buffers command FR-673
- buffers huge size command FR-675
- calendar set command FR-676
- Carriage Return
- See CR
- cautions
- usage in text FR-xi
- CCO
- accessing FR-xi
- definition FR-xi
- cd command FR-168
- CDP
- enabling and disabling for routing device FR-443
- global information, displaying FR-447
- interface status information, displaying FR-451
- neighbor
- information, displaying FR-453
- table, clearing FR-446
- neighbor device, displaying information FR-449
- traffic counters, clearing FR-445
- traffic information, displaying FR-456
- transmission hold time, configuring FR-442
- transmission timer, setting FR-444
- Version-2, enabling FR-440
- cdp advertise-v2 command FR-440
- cdp enable command FR-441
- cdp holdtime command FR-442
- cdp run command FR-443
- cdp timer command FR-444
- character data bits
- changing for session FR-89
- setting for line FR-57
- character padding
- changing for session FR-101
- configuring for line FR-78
- character set
- 7-bit for standard U.S. characters FR-105
- 8-bit
- See 8-bit character set
- character width
- EXEC process
- changing for session FR-94
- configuring for a line FR-67
- defining default FR-58
- special characters
- changing for session FR-105
- configuring for line FR-84
- defining default FR-59
- checksums
- system images, verifying FR-175
- Cisco Connection Online
- See CCO
- Cisco Discovery Protocol
- See CDP
- Cisco IOS
- saving configuration changes FR-xviii
- Cisco-supported RFCs
- (table) FR-869
- clear cdp counters command FR-445
- clear cdp table command FR-446
- clear dsip tracing command FR-814
- clear logging command FR-538
- clear tcp command FR-129
- CLI
- privilege levels FR-8
- clock calendar-valid command FR-677
- clock read-calendar command FR-678
- clock set command FR-679
- clock summer-time command FR-680
- clock timezone command FR-682
- clock update-calendar command FR-683
- command FR-196
- command alias
- See aliases
- command history
- buffer size
- changing for session FR-41
- setting for a line FR-17, FR-19
- displaying previous commands FR-32
- recalling commands FR-32
- command modes
- exiting FR-11
- global configuration FR-222
- privileged EXEC FR-8
- summary (table) FR-xiv
- commands
- abbreviating FR-3
- history
- See command history
- mapping old to new
- (table) FR-321
- mapping old to new (table) FR-214, FR-234, FR-261
- command syntax
- help FR-15
- command syntax conventions
- Cisco IOS documentation FR-xi
- community access string
- setting for SNMP FR-365
- compressed system images FR-292
- compressing configuration files FR-225
- CONFIG_FILE environment variable, specifying FR-216
- config-register command FR-295
- configuration, saving FR-xviii
- configuration file
- active, displaying FR-230
- buffer, changing size FR-215
- copying
- to an rcp server FR-173
- host
- default filename FR-227
- loading from a server FR-218, FR-227
- network
- default filename FR-227
- loading from a server FR-227
- network server, storing FR-175
- NVRAM
- displaying file FR-231
- storing
- in CONFIG_FILE environment variable FR-175, FR-176
- in NVRAM FR-175, FR-176
- configuration files
- copying
- to an rcp server FR-174, FR-219, FR-221
- configuration mode
- exiting FR-10
- configuration register
- streamlined setup facility FR-45
- configure command FR-222
- configure network command
- See copy command
- configure overwrite-network command
- See copy command
- confreg command FR-297
- connections
- display open FR-119
- incoming, definition FR-124
- naming FR-151
- notification of pending output FR-77
- refusing full duplex FR-111
- console
- displaying debug messages FR-99
- logging messages FR-557
- contact string
- setting for SNMP FR-367
- continue command FR-299
- copy FR-209
- copy bootflash rcp command FR-181
- copy command FR-170
- copy erase flash command
- See erase flash command
- copy flash rcp command FR-179, FR-180
- copy mop flash command FR-175
- copy rcp flash command
- example FR-177
- copy rcp running-config command FR-181
- copy rcp startup-config command FR-181
- copy tftp flash command
- example FR-178
- copy verify bootflash command
- copy verify command
- See verify command
- copy verify flash command
- See verify command
- copy xmodem command FR-239
- copy ymodem command FR-240
- CPA
- microcode image
- loading FR-244
- reloading FR-249
- CR FR-859
- CSAA
- See SA Agent
- Ctrl-C command FR-153
- Ctrl-Z command FR-153
- data bits
- changing character FR-89
- setting for session FR-57
- databits command FR-56
- data-character-bits command FR-57
- data flow control
- setting FR-95
- data size
- RTR FR-477, FR-478
- debug command output
- displaying FR-99
- debug dsc clock command FR-815
- debug dsip command FR-816
- debug messages
- displaying enabled FR-602
- default form of a command
- using FR-xvii
- default-value exec-character-bits command FR-58, FR-105
- default-value special-character-bits command FR-59
- delete command FR-186
- diag command FR-539
- dial-tdm-clock command FR-818
- dir command FR-187
- directory
- print working FR-198
- remove FR-200
- disable command FR-4
- disconnect character
- setting FR-60
- disconnect-character command FR-60
- diskless boot
- configuring FR-329
- dispatch character
- changing for session FR-90
- configuring for line FR-61
- dispatch-character command FR-61
- dispatch-machine command FR-62
- dispatch-timeout command FR-64
- distributions-of-statistics-kept command FR-462
- DNS
- enabling for rcp and rsh FR-330
- documentation conventions
- Cisco IOS FR-x
- Domain Name System
- See DNS
- downward-compatible-config command FR-684
- editing command FR-5
- editor
- enhanced mode
- disabling for a line FR-5
- disabling for session FR-36
- enabling for a line FR-5
- enabling for session FR-36
- enable command FR-8, FR-751
- enable password command FR-8
- end command FR-10
- end-of-line character
- changing FR-114
- enhanced editing mode
- See editor, enhanced mode
- environmental conditions
- at last shutdown FR-608
- table of measurements within specification FR-611
- temperature and voltage FR-608
- environment variables
- BOOT, specifying FR-290
- BOOTLDR, specifying FR-286
- CONFIG_FILE, specifying FR-216
- erase bootflash command
- See erase command
- erase command FR-189
- erase flash command FR-241
- erase start-up config command
- See erase command
- error messages
- logging priorities
- (table) FR-557
- logging priorities (table) FR-626
- redirecting FR-567
- escape character
- changing for session FR-93
- defining for a line FR-66
- escape-character command FR-66
- exception core-file command FR-542
- exception dump command FR-544
- exception linecard command FR-546
- exception memory command FR-548
- exception protocol command FR-550
- EXEC
- mode
- default aliases FR-670
- process
- delaying startup of FR-718
- disabling on a line FR-131
- displaying messages upon creation FR-122
- enabling on a line FR-131
- setting timeout interval FR-134
- prompt
- setup command facility FR-45
- exec-banner command FR-122, FR-125
- exec-character-bits command FR-67
- exec command FR-131
- exec-timeout command FR-134
- execute-on command FR-552
- exit
- configuration mode FR-10
- exit command FR-11
- file
- display FR-196
- file compression FR-225
- file prompt FR-191
- file prompt command FR-191
- files
- download mode FR-92
- file system
- erase FR-189
- list FR-187
- setting the default FR-168
- filter-for-history command FR-464
- filtering
- establishing packet size for SNMP FR-389
- Finger protocol
- enabling FR-719
- Flash file system
- check and repair FR-194
- format FR-193
- make directory FR-195
- recover deleted file FR-207
- remove directory FR-200
- rename file FR-199
- squeeze FR-206
- verify memory FR-209
- Flash load helper, monitoring FR-252
- Flash memory
- booting automatically FR-290
- formatting FR-192
- partitioning FR-264
- verifying checksum FR-209
- MOP FR-175
- Flash memory device
- deleting a file FR-186
- flow control
- changing for session FR-95
- end transmission FR-109
- start character FR-107
- stop character FR-109
- format command FR-192
- frequency command FR-466
- fsck command FR-194
- FTP Server
- restricted regions FR-754
- router acting as FR-753
- ftp-server enable command FR-753
- ftp-server topdir command FR-754
- full-help command FR-13
- get command
- See type http command
- global configuration command mode FR-222
- global configuration mode
- summary FR-xiv
- hardware
- break signal FR-110
- flow control FR-95
- Health Monitor
- managed shelf polling FR-768
- SNMP traps FR-783, FR-785
- help
- user-level commands FR-13
- help command FR-xv, FR-15
- High System Availability
- See HSA
- history command FR-17
- history for RTR
- buckets kept FR-460
- displaying FR-505
- filters FR-464
- lives kept FR-471
- samples kept FR-493
- history size command FR-19
- hold character
- changing for session FR-96
- configuring for line FR-69
- hold-character command FR-69
- hops-of-statistics-kept command FR-467
- host configuration file FR-218
- changing FR-218
- copying from a server using rcp FR-175
- example FR-181
- default filename FR-227
- loading from a server FR-218, FR-227
- host name
- router FR-685
- hostname command FR-685
- hours-of-statistics-kept command FR-470
- HSA
- automatic synchronization mode, starting FR-315
- configuration synchronization
- automatic FR-315
- manual FR-319
- configuring default slave RSP FR-316
- master and slave, ensuring identical configurations FR-315
- reload slave RSP card FR-318
- slave image
- reloading FR-318
- specifying FR-317
- synchronizing configurations
- automatically FR-315
- manually FR-319
- HTTP Raw configuration submode FR-526
- http-raw-request command FR-469
- hw-module command FR-820
- idle-terminal message
- enabling FR-156
- incoming connections
- definition FR-124
- informs
- operation, enabling FR-369
- insecure command FR-70
- interface configuration mode
- summary FR-xiv
- internal buffer
- message logging to FR-556
- international character sets
- supporting FR-105
- See also 8-bit character set
- international command FR-158
- invalidated system images FR-271
- IP
- access lists
- time-based FR-668, FR-710
- routing
- displaying status of interfaces FR-359
- ip bootp server command FR-686
- ip ftp passive command FR-324
- ip ftp password command FR-325
- ip ftp source-interface command FR-326
- ip ftp username command FR-327
- ip http access-class command FR-159
- ip http authentication command FR-160
- ip http port command FR-161
- ip http server command FR-162
- ip rarp-server command FR-328
- ip rcmd domain-lookup command FR-330
- ip rcmd rcp-enable command FR-331, FR-337
- ip rcmd remote-host command FR-332
- ip rcmd remote-username command FR-335
- ip rcmd rsh-enable command FR-337
- ip telnet source-interface command FR-687
- ip tftp source-interface command FR-688
- ip wccp command FR-797
- ip wccp enable command FR-800
- ip wccp group-address command FR-797
- ip wccp group-list command FR-797
- ip wccp group-listen command FR-801
- ip wccp password command FR-797, FR-799
- ip wccp redirect exclude in command FR-803
- ip wccp redirect-list command FR-797
- ip wccp redirect out command FR-804
- ip wccp version command FR-807
- IPX
- access lists
- time-range FR-746
- keepalive packets
- generating FR-579, FR-580
- keymaps
- specifying for session FR-97
- length command FR-71
- lines
- sending messages to FR-153
- line speed
- receive speed
- changing for session FR-104
- transmit and receive speed
- changing for session FR-106
- transmit speed
- changing for session FR-116
- link traps
- disabling FR-400
- lives-of-history-kept command FR-471
- loading the configuration file FR-220
- load-interval command FR-689
- load statistics
- interval FR-689
- location command FR-72
- location string
- setting FR-385
- lockable command FR-75
- lock command FR-73
- logging buffer
- clearing FR-538
- logging buffered command FR-556
- logging command FR-555
- logging console command FR-557
- logging facility command FR-559
- facility-type keywords (table) FR-559
- logging history command FR-561
- logging history size command FR-563
- logging linecard command FR-564
- logging messages
- See message logging
- logging monitor command FR-566
- logging on command FR-567
- logging source-interface command FR-569
- logging synchronous command FR-570
- logging syslog-server command FR-755
- logging trap command FR-572
- logout
- warning users of impending FR-76
- logout-warning command FR-76
- lsr-path command FR-473
- MAC address
- mapping to IP address FR-328
- manual booting
- from Flash FR-282
- from ROM FR-282
- mapping
- MAC address-to-IP address FR-328
- memory scan command FR-262
- memory-size iomem command FR-263
- menu (EXEC) command FR-20
- menu clear-screen command FR-135
- menu command FR-136
- resume FR-137
- menu default command FR-138
- menu line-mode command FR-139
- menu options command FR-140
- menu prompt command FR-141
- menu single-space command FR-142
- menu status-line command FR-143
- menu text command FR-144
- menu title command FR-146
- message logging
- console FR-557
- enabling FR-567
- history table size FR-563
- monitor FR-566
- SNMP trap FR-561
- UNIX syslog server FR-555
- message-of-the-day banner
- See MOTD banner
- message queue length
- SNMP FR-390
- messages
- busy FR-152
- displaying debug FR-99
- length FR-153
- line activation, displaying FR-122
- line-in-use FR-152
- redirecting system error FR-567
- sending to other terminals FR-153
- vacant terminal FR-156
- See also banners
- See also message logging
- MIB
- Cisco Round-Trip Time Monitor FR-479
- GUARANTEED-SERVICE FR-870
- IETF Repeater Hub
- See RFC 1516
- Integrated Services (INT-SERV) FR-870
- RMON FR-402, FR-412
- microcode
- loading Cisco IOS image FR-246
- loading from Flash memory FR-242
- reloading FR-250
- microcode (12000) command FR-246
- microcode (7000/7500) command FR-242
- microcode (7200) command FR-244
- microcode reload (12000) command FR-250
- microcode reload (7000/7500) command FR-248
- microcode reload (7200) command FR-249
- mkdir command FR-195
- modes
- See command modes
- monitor
- message logging to FR-566
- MOP
- server
- booting automatically FR-290
- forwarding boot requests FR-339
- mop device-code command FR-338
- mop retransmit-timer command FR-339
- more begin command FR-22
- more command FR-196
- more exclude command FR-24
- more flh:logfile command FR-252
- more include command FR-26
- MOTD banner
- configuring FR-127
- motd-banner command FR-149
- name-connection command FR-151
- network configuration file FR-220
- copying from a server using rcp FR-175
- example FR-181
- default filename FR-227
- changing FR-220
- loading from a server FR-227
- network services
- tailoring use of FR-579, FR-580
- no form of a command
- using FR-xvii
- no menu command FR-148
- nonvolatile RAM file compression FR-225
- no snmp-server command FR-352
- notes
- usage in text FR-xi
- notify command FR-77
- ntp access-group command FR-691
- ntp authenticate command FR-693
- ntp authentication-key command FR-694
- ntp broadcast client command FR-697
- ntp broadcast command FR-696
- ntp broadcastdelay command FR-698
- ntp clock-period command FR-699
- ntp disable command FR-700
- ntp master command FR-701
- ntp peer command FR-703
- ntp server command FR-705
- ntp source command FR-707
- ntp trusted-key command FR-708
- ntp update-calendar command FR-709
- null bytes
- end of string FR-78, FR-101
- NVRAM file compression FR-225
- o command FR-300
- oid command FR-757
- online documentation
- See CCO
- output notification
- configuring for session FR-100
- setting for line FR-77
- owner command FR-474
- packet
- maximum size, establishing FR-389
- SNMP, filtering FR-389
- packet dispatch character
- changing for session FR-90
- setting for line FR-61
- padding
- changing for session FR-101
- configuring for line FR-78
- padding command FR-78
- parity
- changing for session FR-102
- setting for line FR-79
- parity command FR-79
- partition command FR-264
- partition flash command FR-264
- paths-of-statistics-kept command FR-475
- Performance Data Collection
- configuring FR-761
- enabling FR-751
- SNMP data FR-773, FR-788
- transfer method FR-792
- period (.) character
- ping command output FR-574
- periodic command FR-710
- ping (privileged) command FR-573
- ping (user) command FR-576
- ping command FR-220
- test characters (table) FR-573, FR-576
- test connectivity FR-573, FR-576
- poll-interval command FR-759
- port queue
- retry interval FR-103
- printer command (LPD) FR-80
- private command FR-82
- privileged EXEC command mode
- entering FR-8
- privileged EXEC mode
- summary FR-xiv
- privilege level command FR-8
- privilege levels FR-8
- probe
- See SA Agent operation
- probes
- configuring
- type echo command FR-523
- type pathEcho command FR-529
- type tcpConnect command FR-530
- type udpEcho command FR-532
- See RTR
- prompt
- customizing FR-713
- prompt command FR-710, FR-713
- prompts
- system FR-xiv
- pwd command FR-198
- question command FR-xv
- queues
- length, SNMP trap queues FR-390
- RARP
- router, configuring as server FR-328
- rcp
- configuring FR-332, FR-336
- copying files FR-331
- DNS, enabling security FR-330
- remote username FR-292
- rearranging entries in BOOT environment variable FR-292
- references and recommended reading FR-865
- refuse-message command FR-152
- reload command FR-302
- reloading the operating system FR-302
- remote copy protocol
- See rcp
- Remote Monitoring
- See RMON
- remote shell
- See rsh server
- remote username, rcp requests
- default values FR-292
- overriding default value FR-292
- rename command FR-199
- request-data-size command FR-477
- response-data-size command FR-478
- response time reporter
- See RTR
- resume command FR-137
- retry interval
- terminal port queue FR-103
- Reverse Address Resolution Protocol
- See RARP
- RFC
- 1447 (SNMPv2 Party MIB) FR-870
- 1450 (SNMPv2 MIB) FR-870
- 1516 (IETF Repeater Hub MIB) FR-370
- 1901-1908 FR-869
- 2104 FR-870
- 2206 (RSVP MIB) FR-870
- 2213-2214 (Integrated & Guaranteed Services MIBs) FR-870
- 2271-2275 FR-870
- obtaining full text FR-869
- RFC 1034
- domain name servers FR-322
- RFC 1035
- domain names FR-685
- RFC 1084
- BOOTP requests for asynchronous interfaces FR-322
- RFC 1178
- choosing a name for your computer FR-685
- RFC 1447
- predefined SNMP views FR-398
- RFC 1757
- RMON alarm group FR-405
- RMON MIB FR-402, FR-412
- RFC 742
- Finger protocol FR-719
- RFC 865
- Quote of the Day servers FR-322
- RFC 868
- time servers FR-322
- RFC 887
- RLP servers FR-323
- RFC 903
- RARP FR-329
- RFC 950
- subnet masks FR-322
- rmdir command FR-200
- RMON
- agent status, displaying FR-415
- alarms, enabling FR-404
- enabling FR-414
- event table FR-412
- interface, enabling FR-402
- rmon alarm command FR-404
- rmon capture-userdata command FR-406
- rmon collection history command FR-407
- rmon collection host command FR-409
- rmon collection matrix command FR-410
- rmon collection rmon1 FR-411
- rmon command FR-402
- rmon event command FR-412
- rmon queuesize command FR-414
- ROM, booting automatically FR-290
- ROM monitor mode
- summary FR-xiv
- rotary groups
- in-use message FR-156
- router
- host name FR-685
- rsh command FR-341
- rsh server
- (example) FR-342
- access, granting FR-332
- commands, executing FR-337, FR-341
- DNS, enabling security FR-330
- RSVP MIB FR-870
- RTR
- application information, displaying FR-495
- configuration information, displaying FR-502
- configuring probes
- type echo command FR-523
- type pathEcho command FR-529
- type tcpConnect command FR-530
- type udpEcho command FR-532
- displaying
- responder information FR-510
- history
- collection FR-460
- displaying FR-505
- filters FR-464
- lives kept FR-471
- samples kept FR-493
- operational state, displaying FR-507
- probe
- frequency FR-466
- owner FR-474
- scheduling FR-491
- reaction trigger
- configuring FR-486, FR-488
- displaying FR-509
- request data size FR-477
- resetting FR-489
- response data size FR-478
- statistics
- displaying FR-498, FR-503, FR-513
- hops kept FR-467
- hours kept FR-470
- kept FR-462
- paths kept FR-475
- tags FR-515
- threshold FR-516
- timeout FR-517
- verify data FR-534
- See also SA Agent
- rtr command FR-479
- rtr configuration mode
- entering FR-479
- rtr key-chain command FR-482
- rtr low memory command FR-483
- rtr reaction-configuration command FR-484
- rtr reaction-trigger command FR-488
- rtr reset command FR-489
- rtr responder command FR-490
- rtr schedule command FR-491
- running configuration file
- backing up on the server FR-175
- copying to the server (example) FR-181
- rxboot ROM
- streamlined setup facility FR-45
- SA Agent
- authentication information
- displaying FR-497
- operations
- configuring FR-479
- See also RTR commands
- samples command FR-761
- samples-of-history-kept command FR-493
- saving configuration changes FR-xviii
- scheduler allocate command FR-715
- scheduler-interval command FR-716
- screen
- length
- changing for session FR-98
- setting for line FR-71
- output, pausing FR-69
- width
- changing for session FR-118
- setting for line FR-120
- SDP
- system controller FR-777
- security levels
- See privilege levels
- See verify command
- send command FR-153
- serial device
- location, setting FR-72
- service compress-config command FR-225
- service config command FR-220, FR-227
- service decimal-tty command FR-717
- service exec-wait command FR-718
- service finger command FR-719
- service hide-telnet-address command FR-720
- service linenumber command FR-154
- service nagle command FR-721
- service prompt config command FR-722
- services
- tailoring your network FR-579, FR-580
- service slave-log command FR-578
- service tcp-keepalives-in command FR-579
- service tcp-keepalives-out command FR-580
- service tcp-small-servers command FR-723
- service telnet-zero-idle command FR-724
- service timestamps command FR-581
- service udp-small-servers command FR-725
- setup command
- See setup command facility
- setup command facility FR-44
- asynchronous interfaces
- configuration (examples) FR-47 to FR-48
- default client IP address (examples) FR-47 to FR-48
- configuration
- (example) FR-46 to FR-50
- configuration command script
- (example) FR-48
- configuration file, saving FR-45, FR-50
- entering FR-44
- entering after erasing configuration FR-45
- global parameters
- configuration (example) FR-46
- interface parameters
- configuration (example) FR-46 to FR-50
- interface summary, viewing FR-46
- sample configuration FR-46 to FR-50
- System Configuration Dialog FR-44
- (example) FR-46
- returning to privileged EXEC prompt FR-45
- terminating the configuration FR-46
- shelf
- attributes FR-771, FR-790, FR-791
- discovered FR-765
- managed polling FR-775
- starting a session on FR-750
- type selection FR-763
- shelf-id command FR-822
- shelf-type command FR-763
- show FR-196
- show (Flash file system) command FR-266
- show aliases command FR-726
- show async-bootp command FR-343
- show begin command FR-28
- show bootflash command FR-267
- show bootvar command FR-305
- show buffers command FR-673, FR-727
- show c2600 command FR-583
- show c7200 command FR-587
- show calendar command FR-733
- show cdp command FR-447
- show cdp entry command FR-449
- show cdp interface command FR-451
- show cdp neighbors command FR-453
- show cdp traffic command FR-456
- show clock command FR-734
- show configuration command
- See more command
- show context command FR-590
- show context command (2600) FR-588
- show controllers (GRP image) command FR-592
- show controllers (line card image) command FR-594
- show controllers logging command FR-599
- show controllers tech-support command FR-600
- show debugging command FR-602
- show diag command FR-603
- show dial-shelf command FR-824
- show dsc clock command FR-826
- show dsi command FR-828
- show dsip clients command FR-839
- show dsip command FR-835
- show dsip nodes command FR-841
- show dsip ports command FR-843
- show dsip queue command FR-846
- show dsip tracing command FR-847
- show dsip transport command FR-849
- show dsip version command FR-852
- show environment command FR-607
- show exclude command FR-30
- show file command
- See more command
- show file descriptors command FR-202
- show file information command FR-203
- show file systems command FR-204
- show flash command FR-267
- show flash summary command FR-274
- show flh-log command FR-255
- See more flh
- logfile command
- show gsr command FR-621
- show gt64010 command FR-622
- show history command FR-32
- show include command FR-34
- show ip wccp command FR-808
- show ip wccp detail command FR-808
- show ip wccp view command FR-808
- show logging command FR-557, FR-572, FR-624
- show memory command FR-628
- show microcode command FR-256
- show ntp associations command FR-735
- show ntp status command FR-739
- show pci command FR-632
- show pci hardware command FR-634
- show processes command FR-636
- show processes memory command FR-639
- show protocols command FR-641
- show redundancy command FR-854
- show redundancy history command FR-854
- show reload command FR-308
- show rmon alarms command FR-417
- show rmon capture command FR-419
- show rmon command FR-415
- show rmon events command FR-422
- show rmon filter command FR-424
- show rmon history command FR-426
- show rmon hosts command FR-429
- show rmon matrix command FR-431
- show rmon statistics command FR-433
- show rmon topn command FR-436
- show rtr application command FR-495
- show rtr authentication command FR-497
- show rtr collection-statistics command FR-498
- show rtr configuration command FR-501
- show rtr distribution-statistics command FR-503
- show rtr history command FR-505
- show rtr operational-state command FR-507
- show rtr reaction-trigger command FR-509
- show rtr responder command FR-510
- show rtr totals-statistics command FR-511
- show running-config command
- See more command FR-230
- show snmp command FR-353
- show snmp engineID command FR-357
- show snmp group command FR-358
- show snmp pending command FR-359
- show snmp sessions command FR-360
- show snmp user command FR-362
- show sntp command FR-741
- show stacks command FR-642
- show startup-config command
- See more command
- show startup-config command
- See more command
- show subsys command FR-644
- show syscon discover command FR-765
- show syscon mibpoll command FR-768
- show syscon monitor command FR-771
- show syscon perfdata command FR-773
- show syscon sdp command FR-775, FR-777
- show syslog-server command FR-779
- show tcp brief command FR-651
- show tcp command FR-646
- show tdm connections command FR-652
- show tdm connections motherboard command
- channel output, interpreting FR-652
- show tdm data command FR-653
- show tech-support command FR-654
- show version command FR-309
- show whoami command FR-83
- shutdown
- enabling for SNMP FR-391
- Simple Network Management Protocol
- See SNMP
- slave auto-sync config command FR-315
- slave default-slot command FR-316
- slave image command FR-317
- slave reload command FR-318
- slave sync config command FR-319
- slave terminal command FR-320
- SNMP
- configuration parameters, displaying FR-624
- disabling all versions FR-352
- message queue length FR-390
- packet filtering FR-389
- system contact, setting FR-367
- system location, setting FR-385
- system shutdown, enabling FR-352, FR-391
- trap message
- source, setting FR-394
- timeout FR-395
- SNMP server
- informs
- enbling FR-369
- system location, setting FR-378
- trap operation
- enabling FR-369
- recipient FR-378
- snmp-server access-policy command FR-363
- snmp-server chassis-id command FR-364
- snmp-server community command FR-365
- snmp-server contact command FR-367
- snmp-server context command FR-368
- snmp-server enable command FR-369
- snmp-server group command FR-375
- snmp-server host command FR-378
- snmp-server informs command FR-383
- snmp-server location command FR-385
- snmp-server manager command FR-386
- snmp-server manager session-timeout command FR-387
- snmp-server packet-size command FR-389
- snmp-server queue-length command FR-390
- snmp-server system-shutdown command FR-391
- snmp-server tftp-server-list command FR-392
- snmp-server trap-authentication command
- See snmp-server enable traps command FR-393
- snmp-server trap-source command FR-394
- snmp-server trap-timeout command FR-395
- snmp-server user command FR-396
- snmp-server view command FR-398
- snmp trap link-status command FR-400
- sntp broadcast client command FR-742
- sntp server command FR-744
- software configuration boot register FR-295, FR-297
- software flow control
- changing for session FR-95
- changing start character FR-107
- special-character-bits command FR-84
- special characters
- activation character FR-54
- changing for session FR-90
- character width
- changing for session FR-105
- configuring for line FR-84
- defining default FR-59
- disconnect character FR-60
- dispatch character
- setting for line FR-61
- escape character
- changing for session FR-93
- setting for line FR-66
- hold character
- changing for session FR-96
- configuring for line FR-69
- Specifically FR-173
- speed
- See line speed
- squeeze command FR-206
- start character
- changing flow control FR-107
- changing for session FR-107
- startup configuration file FR-182
- state-machine command FR-85
- statistics-distribution-interval command FR-513
- statistics for RTR
- displaying FR-498, FR-503, FR-513
- distributions kept FR-462
- hops kept FR-467
- hours kept FR-470
- paths kept FR-475
- stop bits
- changing for session FR-108
- configuring for line FR-87
- stopbits command FR-87
- stop character
- changing flow control FR-109
- changing for session FR-109
- streamlined setup facility FR-45
- (example) FR-51
- booting from network server
- interface IP parameters, configuring FR-51
- configuration, corrupted startup FR-45
- configuration register FR-45
- rxboot ROM FR-45
- string
- setting system location FR-378
- SNMP community access, setting FR-365
- system contact, setting FR-367
- system location, setting FR-385
- subinterface configuration mode
- summary FR-xiv
- syscon address command FR-781
- syscon community command FR-782
- syscon monitor command FR-783
- syscon monitor traps command FR-785
- syscon password command FR-787
- syscon poll-group command FR-788
- syscon shelf-id command FR-790
- syscon source-interface command FR-791
- Syslog Disk Logging
- syslog server subfiles FR-755, FR-779
- syslog history table FR-624
- system buffer
- See buffers
- system contact string
- setting FR-367
- system controller
- configuring FR-781
- data collection FR-757, FR-759, FR-763
- shelf configuration FR-787
- shelf session FR-750
- SNMP community string FR-782
- system error messages
- redirecting FR-567
- system image file
- copying from server to Flash (example) FR-177
- system images
- checksum, verifying FR-209
- compressed FR-292
- copying from a server using rcp FR-292
- copying using Xmodem FR-259
- copying using Ymodem FR-259
- default filename FR-291
- invalidated FR-271
- system location string
- setting FR-385
- system shutdown
- enabling for SNMP FR-352, FR-391
- system software
- booting FR-290, FR-291
- displaying version of FR-309
- Tab key
- command completion FR-xv
- tag command FR-515
- TCP
- connections
- clearing FR-129
- keepalive protocol, activating FR-580
- packet dispatch state machine FR-62
- technical publications and standards FR-867
- technical support information
- displaying FR-654
- Telnet
- addresses, suppressing FR-720
- changing end-of-line characters FR-114
- notification of pending output FR-77
- Remote Echo option FR-111
- Suppress Go Ahead option FR-111
- terminal
- activation character
- setting FR-54
- changing
- escape character FR-93
- line speed FR-106
- screen length FR-98
- stop character FR-109
- character
- data bits FR-89
- padding FR-101
- character padding
- configuring for line FR-78
- displaying
- debug messages FR-99
- end-of-line character FR-114
- escape character, defining for a line FR-66
- file download mode FR-92
- flow control FR-95
- line speed FR-106, FR-116
- location, recording FR-72
- locking FR-75
- message length FR-153
- output notification FR-100
- packet dispatch character FR-90
- parity bit FR-102
- pausing output to screen FR-69
- port queue FR-103
- receive speed FR-104
- screen length
- changing for session FR-98
- configuring for line FR-71
- screen width
- changing for session FR-118
- configuring for line FR-120
- settings, saving FR-82
- specifying type FR-115
- start character FR-107
- type, configuring for a line FR-117
- terminal databits command FR-88
- terminal data-character-bits command FR-89
- terminal dispatch-character command FR-90
- terminal dispatch-timeout command FR-91
- terminal download command FR-92
- terminal editing command FR-36
- terminal escape-character command FR-93
- terminal exec-character-bits command FR-94
- terminal flowcontrol command FR-95
- terminal full-help command FR-39
- terminal history command FR-41
- terminal hold-character command FR-96
- terminal international command FR-164
- terminal keymap-type command FR-97
- terminal length command FR-98
- terminal monitor command FR-99
- terminal notify command FR-100
- terminal padding command FR-101
- terminal parity command FR-102
- terminal port queue
- retry interval FR-103
- terminal-queue command FR-103
- terminal rxspeed command FR-104, FR-116
- terminals
- lock access FR-73
- terminal sessions
- closing FR-11
- terminal special-character-bits command FR-105
- terminal speed command FR-106
- terminal start-character command FR-107
- terminal stopbits command FR-108
- terminal stop-character command FR-109
- terminal telnet break-on-ip command FR-110
- terminal telnet refuse-negotiations command FR-111
- terminal telnet speed command FR-112
- terminal telnet sync-on-break command FR-113
- terminal telnet transparent command FR-114
- terminal terminal-type command FR-115
- terminal txspeed command FR-116
- terminal-type command FR-117
- terminal width command FR-118
- test flash command FR-656
- test interfaces command FR-657
- test memory command FR-658
- TFTP
- server
- booting automatically FR-290
- router, configuring to function as FR-344
- tftp FR-347
- tftp-server command FR-344
- tftp-server system command
- See tftp-server command
- threshold command FR-516
- timeout command FR-517
- timeout interval FR-91
- EXEC process, setting FR-134
- terminal character dispatch FR-64
- trap message FR-395
- time-range command FR-746
- tos command FR-518
- trace
- common problems FR-663
- terminating FR-663
- tracing IP routes FR-664
- trace (privileged) command FR-659
- trace (user) command FR-663
- trace command
- common problems FR-659
- extended test FR-659
- IP
- routes FR-660
- privileged, overview FR-659
- terminating FR-659
- user, overview FR-663
- transfer-mode command FR-792
- trap
- host, setting message queue length FR-390
- message
- establishing timeout FR-395
- source interface FR-394
- operation, enabling FR-369
- recipient, specifying FR-378
- triggers for RTR
- configuring FR-486, FR-488
- displaying FR-509
- Trivial File Transfer Protocol
- See TFTP
- type echo command FR-523
- type pathEcho command FR-529
- type tcpConnect command FR-530
- type udpEcho command FR-532
- undelete command FR-207
- UNIX
- compress command FR-292
- Syslog Server
- message logging to FR-555
- uncompress command FR-292
- unrecognized command message
- help command FR-67
- user EXEC mode
- summary FR-xiv
- vacant-message command FR-156
- verify bootflash command FR-257
- verify command FR-209
- verify-data command FR-534
- verify flash command FR-258
- views, predefined
- described in RFC 1447 FR-398
- where command FR-119
- width command FR-120
- word help
- description FR-15
- write FR-189, FR-196, FR-279
- write memory command
- See copy command
- write terminal command
- See more command
- xmodem command FR-259
Copyright 1989-1999
©
Cisco Systems Inc.
