Table of Contents

Cisco IOS Dial Services Configuration Guide: Terminal Services, Release 12.1

Symbols   A   B   C   D   E   F   G   H   I   K   L   M   N   O   P   Q   R   S   T   U   V   W   X

Symbols

? command     xli

A

AAA/TACACS+

ARA authentication

enabling     DTC-559

PPP authentication

enabling     DTC-246, DTC-342

undefined list name

(caution)     DTC-246

aaa authentication arap command     DTC-559

aaa authentication nasi command     DTC-143

aaa authentication ppp command     DTC-246, DTC-342

abbreviating commands

context-sensitive help     xli

absolute-timeout command     DTC-461

access-class command     DTC-426, DTC-478

access control

AppleTalk     DTC-562

ARA     DTC-556

asynchronous interfaces

(example)     DTC-37

Legacy DDR

configuring     DTC-315  to DTC-316, DTC-346

outgoing calls

configuring     DTC-173, DTC-315

access-list command     DTC-173, DTC-299, DTC-303

access lists

DDR

DECnet     DTC-302

IP     DTC-300

transparent bridging     DTC-299

VINES     DTC-302

XNS     DTC-303

DECnet

dialer profiles     DTC-376

dialer groups     DTC-304

dialer profiles

Ethernet type codes     DTC-379

VINES     DTC-375

IP

dialer profiles     DTC-376

LAT

configuration (example)     DTC-430

defining     DTC-425

Legacy DDR

interface assignment     DTC-315, DTC-346

X.29

configuring     DTC-477

XNS

dialer profiles     DTC-377

access restrictions

asynchronous interfaces     DTC-37

addresses

asynchronous interfaces     DTC-71

default asynchronous

configuring     DTC-71

dynamic asynchronous

configuring     DTC-71

IP

pooling     DTC-477

symbolic host X.25

configuring     DTC-479

unnumbered interfaces     DTC-70

(example)     DTC-42

addressing

dynamic

configuring     DTC-42

address pooling

DHCP     DTC-252

global default mechanism

local pooling     DTC-253

AppleTalk

access control     DTC-562

cable ranges

configuration (example)     DTC-570

DDR

configuring     DTC-301

dialer profiles

configuring     DTC-375

discovery mode

configuration (example)     DTC-571

extended interface

configuration (example)     DTC-570

interfaces

monitoring     DTC-564

internal network advertisements     DTC-554

MacIP clients

monitoring     DTC-564

MacIP servers

monitoring     DTC-564

networks

monitoring     DTC-563

PPP

configuring     DTC-276

services

enabling     DTC-554

traffic statistics

monitoring     DTC-564

zone information (table)     DTC-564

zones

PPP access (example)     DTC-40

appletalk address command     DTC-256

appletalk cable-range command     DTC-256

appletalk client-mode command     DTC-276

AppleTalk Control Protocol

See ATCP

AppleTalk Remote Access

See ARA

appletalk send-rtmps command     DTC-554

appletalk service command     DTC-554

appletalk virtual-net command     DTC-276

ARA

access control     DTC-556

automatic sessions

starting     DTC-74

automatic session startup

configuring     DTC-555

configuration (example)     DTC-568

configuring     DTC-554

connectivity prerequisites     DTC-551

dedicated line (example)     DTC-569

guests

disabling     DTC-557

Inter-Poll verification tool     DTC-563

Kerberos security authentication     DTC-561

monitoring     DTC-563

multiuse line (example)     DTC-568

overview     DTC-551

PPP

configuring     DTC-552

security

CCL scripts

configuring     DTC-559  to DTC-561

internal username authentication     DTC-557

TACACS/ARA     DTC-558

TACACS username authentication (example)     DTC-571

servers

cabling and connections (example)     DTC-553

configuration (example)     DTC-567

lines, configuring     DTC-553

modems, configuring     DTC-553

monitoring     DTC-563

tunneling     DTC-467

one-step     DTC-475

X.25 client to AppleTalk network (example)     DTC-572

arap dedicated command     DTC-555

arap enable command     DTC-554

arap net-access-list command     DTC-557

arap network command     DTC-554, DTC-562

arap noguest command     DTC-557

arap require-manual-password command     DTC-556

arap timelimit command     DTC-555

arap use-tacacs command     DTC-559

arap warningtime command     DTC-555

arap zonelist command     DTC-556

ARP

table

verifying entries     DTC-564

async-bootp command     DTC-69

async default routing command     DTC-73

async dynamic address command     DTC-72

async dynamic routing command     DTC-73

asynchronous group interfaces

CHAP authentication     DTC-30, DTC-31

IP unnumbered     DTC-31

PAP authentication     DTC-30, DTC-31

PPP encapsulation     DTC-30, DTC-31

verifying     DTC-32

asynchronous host mobility

configuring     DTC-277

asynchronous host roaming

(example)     DTC-277

asynchronous interfaces

addressing methods

configuring     DTC-72

description     DTC-71

bandwidth

configuring optimal     DTC-78

broadcasts on     DTC-273

chat scripts

configuring     DTC-87

configuration options     DTC-28

dedicated network mode

(example)     DTC-37

default addresses

configuring     DTC-71

dynamic addresses

configuring     DTC-71

dynamic addressing

(example)     DTC-42

group and member

(examples)     DTC-37

IPX loopback interfaces     DTC-275

low bandwidth     DTC-271

modems

configuration (examples)     DTC-80

monitoring     DTC-37, DTC-60

network interface (example)     DTC-43

protocol functions

header compression     DTC-485

keepalive updates     DTC-485

vty lines     DTC-483

routing configuration (example)     DTC-273

TCP/IP header compression

(example)     DTC-42

configuring     DTC-78

troubleshooting     DTC-79

asynchronous mode

low-speed serial interface     DTC-70

async mode dedicated command     DTC-72

async mode interactive command     DTC-72, DTC-277

AT

modem attention commands     DTC-98, DTC-112

AT&T

latched CSU loopback specification     DTC-200

ATCP

PPP

enabling     DTC-276

autocommand command     DTC-77, DTC-137

autodetect encapsulation command     DTC-172, DTC-235, DTC-237

autohangup command     DTC-66

Autoselect

incoming protocol sensor     DTC-74

autoselect command     DTC-75, DTC-555

auxiliary ports

asynchronous serial interfaces

configuring     DTC-73

B

backup delay command     DTC-391

backup interface command     DTC-390

backup interfaces

dialer profiles     DTC-395

overview     DTC-389

See also dial backup, serial interfaces, and serial interfaces

backup load command     DTC-391

bandwidth

configuring optimal     DTC-78

bandwidth on demand

load threshold     DTC-319, DTC-349

banners

line numbers     DTC-462

SLIP-PPP     DTC-283

(example)     DTC-285

tokens     DTC-283

banner slip-ppp command     DTC-283

baud rates

lines

configuring     DTC-460

terminal

configuring     DTC-459

See also line speeds

binding

DNIS-plus-ISDN-subaddress     DTC-160

BOOTP

requests

configuring     DTC-69

description     DTC-272

bridge group command     DTC-316, DTC-346, DTC-380

bridge protocol command     DTC-299, DTC-378

broadcasts

asynchronous interfaces     DTC-273

IP

asynchronous serial traffic over UDP     DTC-135

buffers command     DTC-153

bundle

MLP Inverse Multiplexer     DTC-263

busy-message command     DTC-411

C

cable ranges

AppleTalk

configuring     DTC-571

calls

analog

robbed-bit signalling     DTC-166

analog modem     DTC-4

asynchronous character steam     DTC-4

channel-associated signalling     DTC-166

circuit-switched digital     DTC-3

incoming

V.120 asynchronous     DTC-234

ISDN not end-to-end     DTC-158

outgoing

access control     DTC-173, DTC-315

prevent incoming     DTC-68

X.3 PAD

XOT, enabling     DTC-543

carrier wait time

dialer profiles     DTC-374

cas-group command     DTC-186

cas-group timeslots command     DTC-181

cause codes

ISDN     DTC-159

cautions

undefined AAA/TACACS+ list     DTC-246

usage in text     xxxv

CCO

accessing     xxxvi

definition     xxxvi

central sites

protocol translation     DTC-498

Challenge Handshake Authentication Protocol

See CHAP

channel-associated signalling

(examples)     DTC-213

analog calls on Cisco AS5200     DTC-180

channelized E1

channel-associated signalling

analog calls     DTC-180

channel groups

(example)     DTC-205

serial interfaces     DTC-199

testing     DTC-199

troubleshooting interface loopbacks     DTC-199, DTC-200

channel uses     DTC-166

controllers

troubleshooting     DTC-196, DTC-198

description     DTC-15

ISDN PRI

configuring     DTC-168

D-channel number     DTC-168

PRI groups

(example)     DTC-205

R2 signalling     DTC-180

testing channel group     DTC-199

channelized T1

channel groups

(example)     DTC-205

serial interfaces     DTC-199

troubleshooting interface loopbacks     DTC-199, DTC-200

channel uses     DTC-166

controllers

troubleshooting     DTC-197, DTC-198

description     DTC-15

ISDN PRI

configuring     DTC-169

D-channel number     DTC-170

local loopback and ping     DTC-197

PRI groups

(example)     DTC-205

switched 56K     DTC-181

See also switched 56K

channels

ISDN 2 B + D

BRI     DTC-16

logical relationship     DTC-17

PRI     DTC-17

CHAP

challenge     DTC-487

challenge packet     DTC-245

description     DTC-487

enabling     DTC-487

encrypted password (examples)     DTC-264

PAP authentication order     DTC-246

response     DTC-245

chat-script command     DTC-89

chat scripts

(examples)     DTC-91, DTC-92

asynchronous lines     DTC-313

escape sequences

(table)     DTC-89

expect-send pairs

(table)     DTC-89

naming conventions     DTC-88

overview     DTC-78

Cisco 2520-2523 routers

slow-speed serial interfaces

configuring     DTC-70

Cisco 3000

protocol translator (example)     DTC-496

Cisco 700 and 800

Combinet Proprietary Protocol     DTC-171, DTC-228

protocols supported     DTC-229

Cisco 7500

MLP Inverse Multiplexer     DTC-262

Cisco AS5200

channelized E1/T1

channel uses     DTC-166

R1 modified signalling

configuring     DTC-193

Cisco AS5300

R1 modified signalling

configuring     DTC-193

Cisco AS5800

R1 modified signalling

configuration (examples)     DTC-218

Cisco Connection Online

See CCO

Cisco IOS

saving configuration changes     xliv

clear dialer command     DTC-323, DTC-353, DTC-380

clear interface virtual-access command     DTC-488

clear line command     DTC-79

clear modem at-mode command     DTC-113

client server

X Window System     DTC-444

clns filter-set command     DTC-303

clock

internal

enabling     DTC-48

transmit

invert signal     DTC-49

clock rate command     DTC-50

clock source command     DTC-52, DTC-181, DTC-186

Combinet

See Cisco 700 and 800

command control language scripts

See ARA, security, CCL scripts and TACACS, CCL scripts

command modes

dedicated network interfaces

configuring     DTC-72

interactive sessions

configuring     DTC-72

summary (table)     xl

command syntax conventions

Cisco IOS documentation     xxxvi

communication servers

remote

automatic dialing     DTC-62

compressions

HDLC     DTC-47

Microsoft PPP     DTC-249

Multilink PPP     DTC-163

predictor (example)     DTC-163

Stacker     DTC-163

(example)     DTC-163

compress predictor command     DTC-248

compress stac command     DTC-48, DTC-248

configuration, saving     xliv

configure terminal command     DTC-186

connect command     DTC-412

connections

ARA

AppleTalk network     DTC-563

dial-in

testing     DTC-60

direct modem

(example)     DTC-135

full duplex     DTC-411

IPX dial-out     DTC-143

LAT

configuring     DTC-427

host-initiated     DTC-419, DTC-422

Legacy X.3 PAD     DTC-540

LLC2

NetBEUI clients over PPP     DTC-279

modems

stopping     DTC-65

troubleshooting     DTC-134

NASI     DTC-143

PPP     DTC-278

printers

configuration (example)     DTC-77

configuring     DTC-68

protocol translations

monitoring     DTC-490

quiet asynchronous tunnel     DTC-413

resuming X.3 (examples)     DTC-542

reverse modem     DTC-68

rlogin     DTC-413

rotary groups     DTC-77

semipermanent ISDN

BRI     DTC-156

Germany, Australia     DTC-226

PRI     DTC-173

SLIP     DTC-279

TCP

monitoring     DTC-414

TCP connection attempt time

configuring     DTC-281

Telnet     DTC-413

TN3270     DTC-440

transparent TCP     DTC-414, DTC-415

X.28 PAD     DTC-529

XRemote     DTC-444, DTC-448

controller e1 command     DTC-168, DTC-181

controllers

E1

description     DTC-14

T1

description     DTC-14

controller t1 command     DTC-169, DTC-186

CRC

16-bit default     DTC-48

32-bit

enabling     DTC-48

configuring     DTC-48

crc4 command     DTC-51

crc command     DTC-48

CSU loopbacks

AT&T specification     DTC-200

latched     DTC-200

cyclic redundancy check

See CRC

D

data bits

configuring     DTC-460

databits command     DTC-459

data compression

modem negotiation     DTC-79, DTC-80

data terminal ready

See DTR

dce-terminal-timing enable command     DTC-50

DDR

access lists

dialer groups     DTC-304

routed protocols, configuring     DTC-300

AppleTalk

configuring     DTC-301

bridged protocols     DTC-297

chat scripts

configuring     DTC-87

enabling     DTC-92

configuration (examples)     DTC-304  to DTC-307

decision flowchart     DTC-293

DECnet

configuring     DTC-302

control packets     DTC-302

dependent implementation decisions     DTC-296

fast switching     DTC-349

independent implementation decisions     DTC-295

interesting packets     DTC-315

interfaces     DTC-297, DTC-298, DTC-311

IP

configuring     DTC-300

IPX

configuring     DTC-301

ISDN PRI

configuration (example)     DTC-203

ISO CLNS

configuring     DTC-303

routed protocols     DTC-297, DTC-299

See also dialer profiles

See also Legacy DDR

transparent bridging     DTC-298

permit all packets     DTC-299

type code access     DTC-299

uninteresting packets     DTC-315

VINES

configuring     DTC-302

XNS

configuring     DTC-303

See also dialer profiles

See also Legacy DDR

debug async command     DTC-79

debug dialer command     DTC-161, DTC-178, DTC-229

debug isdn events command     DTC-161, DTC-178

debug isdn q921 command     DTC-229

debug isdn q931 command     DTC-59, DTC-229

debug modem command     DTC-59

debug modem csm command     DTC-59

debug ppp chap command     DTC-79

debug ppp error command     DTC-79

debug ppp negotiation command     DTC-79

debug ppp packet command     DTC-79

debug q921 command     DTC-161, DTC-178

debug q931 command     DTC-161, DTC-178

debug udptn command     DTC-138

DECnet

DDR

access lists     DTC-302

configuring     DTC-302

control packets     DTC-302

dialer profiles

access lists     DTC-376

configuring     DTC-376

control packets     DTC-376

dedicated mode

asynchronous interfaces

configuring     DTC-72

configuration (example)     DTC-37

default form of a command

using     xliii

DHCP

address pooling     DTC-476

client proxy

enabling     DTC-476

configuration (examples)     DTC-39

IP address pooling

configuring     DTC-252

local IP address pool

(example)     DTC-39

dial backup

dialer profiles     DTC-395  to DTC-397

backup interfaces     DTC-396

dialer interfaces, configuring     DTC-396

ISDN BRI (example)     DTC-397

physical interfaces     DTC-396

ISDN channels     DTC-392

load threshold exceeded (examples)     DTC-393

load threshold reached (examples)     DTC-393

primary line down (examples)     DTC-394

serial interfaces     DTC-389  to DTC-393

See also Dialer Watch

Dialed Number Identification Service

See DNIS

dialer dtr command     DTC-312

dialer enable-timeout command     DTC-318, DTC-348

dialer fast-idle command     DTC-317, DTC-347, DTC-374

dialer-group command     DTC-156, DTC-173, DTC-258, DTC-316, DTC-346, DTC-373, DTC-396

dialer hold-queue command     DTC-319, DTC-349

dialer idle-timeout command     DTC-223, DTC-257, DTC-258, DTC-317, DTC-347, DTC-374

dialer in-band command     DTC-257, DTC-258, DTC-312

dialer interfaces

See interfaces

dialer isdn command     DTC-374

dialer isdn short-hold command     DTC-223

dialer-list command     DTC-156, DTC-173, DTC-304

dialer-list protocol bridge command     DTC-299, DTC-315, DTC-316, DTC-379

dialer-list protocol command     DTC-304, DTC-373

dialer-list protocol list command     DTC-304

dialer load-threshold

Multilink PPP     DTC-258

async interface     DTC-257

BRI, configuring single     DTC-257

BRIs in rotary group     DTC-259

idle timers     DTC-258, DTC-259

dialer load-threshold command     DTC-257, DTC-258, DTC-259, DTC-319, DTC-349

dialer map-class

description     DTC-370

dialer map command     DTC-313

dialer map modem-script system-script command     DTC-314, DTC-340, DTC-345

dialer map name command     DTC-343

dialer map name spc command     DTC-156, DTC-173, DTC-226

dialer map name speed command     DTC-156, DTC-173

dialer pool

dialer profiles

backup interfaces     DTC-395

physical interfaces     DTC-371

priorities     DTC-371

dialer pool command     DTC-373, DTC-396

dialer pool-member command     DTC-374

dialer priority command     DTC-318, DTC-348

dialer profiles

AppleTalk

configuring     DTC-375

bridging protocols     DTC-378

central site

multiple remote networks (example)     DTC-381

configuring     DTC-372

DECnet

configuring     DTC-376

control packets     DTC-376

dial backup     DTC-395  to DTC-397

dialer interfaces

configuring     DTC-372, DTC-396

description     DTC-370

remote destination and map class     DTC-373

See also interfaces

dialer map-class

description     DTC-370

dialer pool

description     DTC-371

dialer interfaces     DTC-371

physical interfaces     DTC-371

reserved channel     DTC-371

dialing pool reserved channels     DTC-374

IP

addresses

remote network node     DTC-371

configuring     DTC-376

IPX

configuring     DTC-377

ISDN BRI

two leased lines (example)     DTC-382, DTC-397

map class     DTC-374

configuring     DTC-373

fast idle timer     DTC-374

ISDN requirements     DTC-374

wait for carrier time     DTC-374

physical interfaces

configuring     DTC-371, DTC-374

routing protocols     DTC-378

source address validation

disabling     DTC-296

transparent bridging

access control     DTC-378

bridging protocols, configuring     DTC-378

interesting packets     DTC-379

interfaces, configuring     DTC-379

type code access     DTC-379

VINES

configuring     DTC-375

XNS

configuring     DTC-377

Dialer Profiles feature

overview     DTC-369

dialer remote-name command     DTC-396

dialer rotary

Multilink PPP     DTC-258

dialer rotary-group command     DTC-257, DTC-259, DTC-341, DTC-344

dialer rotary groups

(example)     DTC-362

bandwidth on demand

load threshold     DTC-349

interfaces

assigment     DTC-344

priority     DTC-318, DTC-348

leader     DTC-339

dialer-string class command     DTC-373, DTC-396

dialer string command     DTC-313, DTC-314, DTC-345

dialer wait-for-carrier-time command     DTC-318, DTC-348, DTC-374

Dialer Watch

addresses

configuring     DTC-401

benefits     DTC-400

configuration (examples)     DTC-402

configuring     DTC-400

dial backup     DTC-389

interfaces

disable timer     DTC-401

primary     DTC-401

secondary     DTC-401

interface status     DTC-401

overview     DTC-399

dialer watch-disable command     DTC-401

dialer watch-group command     DTC-401

dialer watch-list command     DTC-401

dialing

automatic modem

configuring     DTC-62

DTR     DTC-312

configuration (example)     DTC-330

incoming calls, configuring     DTC-313

outgoing calls, configuring     DTC-312

remote interface     DTC-312, DTC-313

remote passive interface     DTC-312, DTC-313

X.25 (example)     DTC-367

X.25 encapsulation (example)     DTC-336

Legacy DDR

outgoing calls, configuring     DTC-313

display server

X Window System     DTC-444

DNIS

encapsulation types based on     DTC-154

ISDN subaddress binding     DTC-160

(example)     DTC-164

documentation conventions

Cisco IOS     xxxv

dte-invert-txc command     DTC-50

dynamic addressing

configuring     DTC-42

Dynamic Host Control Protocol

See DHCP

Dynamic Multiple Encapsulations

description     DTC-150

E

ear and mouth signalling

description     DTC-14

EBCDIC

IBM 3270 terminal character format     DTC-432

mapping control     DTC-439

encapsulation hdlc command     DTC-48

encapsulation lapb command     DTC-323, DTC-353

encapsulation ppp command     DTC-244, DTC-246, DTC-248, DTC-314, DTC-343, DTC-345, DTC-373, DTC-374, DTC-396

encapsulations

automatic detection     DTC-228

dynamic multiple     DTC-150, DTC-370

ISDN LAPB-TA autodetect     DTC-237

supported     DTC-22

synchronous serial     DTC-47

V.120 dynamic detection     DTC-235

encapsulation x25 command     DTC-322, DTC-352

exec command     DTC-73

EXEC process

disabling     DTC-73

enabling     DTC-73

exec-timeout command     DTC-73

exit command     DTC-186

Extended Binary-Coded Decimal Interchange Code

See EBCDIC

F

fast switching

IP

disabling     DTC-282

enabling     DTC-282

Legacy DDR

IP     DTC-320, DTC-350

IPX     DTC-320, DTC-350

fonts

DECwindows

access     DTC-447

remote access     DTC-445

X terminal nonresident

access     DTC-447

Frame Relay

DDR

configuration overview     DTC-351

restrictions     DTC-351

dialup connections     DTC-320, DTC-350

LAT-to-LAT protocol translation (example)     DTC-502

Legacy DDR

configuration overview     DTC-321

interfaces supported     DTC-320

restrictions     DTC-321

framing command     DTC-186

framing crc4 command     DTC-168, DTC-181

framing esf command     DTC-169

G

G.703

See serial interfaces, G.703

Germany

ISDN semipermanent connection support     DTC-156

global configuration mode

summary     xl

group asynchronous interfaces

configuring     DTC-28

group-range command     DTC-9, DTC-38

H

HDLC

compressions

Stacker     DTC-47

help command     xli

Hong Kong

ISDN Sending Complete information element     DTC-159, DTC-174

host names

symbolic

configuring X.25     DTC-479

hunt group

See rotary groups

I

idle timer

Multilink PPP

dialer load thresholds     DTC-258

dialer timeout     DTC-258, DTC-259

ignore-dcd command     DTC-50

IGRP

dial-in router     DTC-44

interface bri command     DTC-153, DTC-234

interface configuration mode

summary     xl

interface dialer command     DTC-258, DTC-373, DTC-396

interface multilink command     DTC-263

interfaces

asynchronous

configuration options     DTC-8

configuring     DTC-7

description     DTC-28

logical constructs     DTC-8

Multilink PPP     DTC-256

compared to lines     DTC-8

DDR priority     DTC-352

dial backup

dialer profiles     DTC-395

dialer     DTC-370

configuring     DTC-372, DTC-373

description     DTC-11

downtime, enabling     DTC-348

logical entity     DTC-311, DTC-339

serial address     DTC-341

dialer rotary group assignment     DTC-344

group asynchronous

configuring     DTC-28

ISDN BRI

Multilink PPP     DTC-257  to DTC-258

ISDN PRI     DTC-166

low-speed serial     DTC-70

peer address allocation methods     DTC-250

physical     DTC-371

dialer pool, configuring     DTC-371

point-to-point

IP address pooling     DTC-250

relationship to lines     DTC-20

synchronous serial

configuration (examples)     DTC-52

configuring     DTC-45

DTR signal pulsing     DTC-49

enabling     DTC-46

encapsulation methods     DTC-47

ignore DCD signal     DTC-49

unnumbered     DTC-70

virtual asynchronous     DTC-233

virtual templates

configuring     DTC-471, DTC-473

description     DTC-10

interface serial command     DTC-170, DTC-186, DTC-230, DTC-234

interface virtual-template command     DTC-471, DTC-473

internal clock

See clock, internal

Internet Packet Exchange Protocol

See IPX

Internet Protocol

See IP

invert-transmit-clock command     DTC-49

IP

address pooling     DTC-477

assignment method     DTC-252

concept     DTC-250

DHCP     DTC-252

global default mechanism     DTC-252  to DTC-253

interfaces supported     DTC-251

local address pooling     DTC-253

peer address allocation methods     DTC-250

per-interface options     DTC-253

precedence rules     DTC-251

broadcasts

asynchronous serial traffic over UDP     DTC-135

fast switching

DDR     DTC-320

disabling     DTC-282

enabling     DTC-282

Legacy DDR     DTC-350

IP-SLIP

(example)     DTC-40

LAT-to-LAT protocol translations

configuring     DTC-500

performance parameters

configuring     DTC-280

PPP

configuring over     DTC-274

PPP-IP

(example)     DTC-40

route cache invalidation     DTC-283

ip address command     DTC-256, DTC-258, DTC-263, DTC-373

ip address-pool command     DTC-252, DTC-253, DTC-476, DTC-477

ip alias command     DTC-411

ip cache-invalidate-delay command     DTC-283

IPCP

See IP-PPP

ip dhcp-server command     DTC-252

IP header compression

See TCP/IP, header compression

ip host command     DTC-82, DTC-133

ip local pool command     DTC-253, DTC-477

IP multicast routing

asynchronous serial traffic over UDP     DTC-135

IP-PPP

enabling     DTC-274

ip route-cache command     DTC-282, DTC-320, DTC-350

ip route-cache distributed command     DTC-320, DTC-350

ip routing command     DTC-378

ip tcp chunk-size command     DTC-411

ip tcp compression-connections command     DTC-281

ip tcp header-compression command     DTC-78, DTC-281

ip tcp synwait-time command     DTC-281

ip telnet quiet command     DTC-416

ip unnumbered command     DTC-70

ip unnumbered ethernet command     DTC-471, DTC-473

ip unnumbered loopback command     DTC-396

IPX

configuring over PPP     DTC-275

DDR

configuring     DTC-301

dialer profiles

configuring     DTC-377

fast switching

Legacy DDR     DTC-350

header compression over PPP     DTC-281

network numbers

(example)     DTC-41

over PPP

dedicated network numbers     DTC-275

loopback interfaces     DTC-275

vty lines, configuring     DTC-484

PPP

configuring     DTC-274

loopback interfaces (example)     DTC-41

ipx compression enable command     DTC-282

IPXCP

See IPX, over PPP

ipx nasi-server enable command     DTC-143

ipx network command     DTC-256

ipx ppp-client loopback command     DTC-275

ipx route-cache command     DTC-377

ipx spx-idle-time command     DTC-301, DTC-377

ipx spx-spoof command     DTC-301, DTC-377

ipx watchdog-spoof command     DTC-301, DTC-377

ISDN

128 kbps leased-line service

(example)     DTC-232

configuring     DTC-227

interface characteristics     DTC-227

Advice of Charge     DTC-222  to DTC-223

BRI and dialer profiles (example)     DTC-230

call history     DTC-223

destination     DTC-222

dialer map class     DTC-223

dialer profiles     DTC-222

ISDN interface, configuring     DTC-222

Legacy DDR     DTC-222

outgoing calls     DTC-222

overview     DTC-222

PRI and legacy DDR (example)     DTC-230

short-hold mode, configuring     DTC-222

switch types     DTC-222

B channel

ascending call order (example)     DTC-205

call order default     DTC-177

outgoing call order     DTC-177

call history     DTC-223

cause codes     DTC-159

channels

disabling     DTC-225

channel service states     DTC-226

DNIS-plus-ISDN-subaddress binding

(example)     DTC-383

encapsulations

automatic detection     DTC-228

dynamic multiple     DTC-383

interfaces

monitoring     DTC-223

TEI     DTC-173

LAPB-TA asynchronous traffic     DTC-236

leased-line service

Germany and Japan     DTC-227

multiple switch types     DTC-149, DTC-151

configuration (example)     DTC-161

PRI interfaces

configuring     DTC-176

restrictions     DTC-176

NFAS     DTC-223  to DTC-226

alternate route index     DTC-224

backup D-channel     DTC-225, DTC-232

channelized T1 controllers (example)     DTC-232

DDR configuration (example)     DTC-232

PRI group     DTC-224

primary D-channel     DTC-225, DTC-231

service state (example)     DTC-232

NFAS channel interface

configuring     DTC-225

disabling     DTC-225

NFAS groups

monitoring     DTC-225

NFAS switch types     DTC-224

semipermanent connections

Australia, Germany     DTC-226

semipermanent connection support     DTC-173

special signalling

(examples)     DTC-229

troubleshooting     DTC-229

subaddress     DTC-314, DTC-340

subaddress binding     DTC-160

isdn all-incoming-calls-v120 command     DTC-234

isdn answer1 command     DTC-157

isdn answer2 command     DTC-158

isdn bchan-number-order command     DTC-177

ISDN BRI

asynchronous access     DTC-235

called party number

verifying     DTC-157

caller ID screening     DTC-157

calling line identification

configuring     DTC-157

calling number identification     DTC-158

compression (examples)     DTC-163

configuration buffers

configuring     DTC-152

verifying     DTC-152

configuration self-tests     DTC-161

configuring     DTC-147  to DTC-164

dialer rotary group (example)     DTC-162

encapsulations

configuring     DTC-154

fast rollover delay

configuring     DTC-158

global and interface switch type (example)     DTC-161

interfaces

configuration (example)     DTC-202

configuring     DTC-149, DTC-151, DTC-153

monitoring     DTC-160

leased-line service     DTC-226

128 kbps     DTC-227

normal speeds     DTC-227

platform support     DTC-227

line configuration requirements     DTC-148

line speed

configuring     DTC-158

MLP and compression (example)     DTC-163

MTU size     DTC-152

network address

configuring     DTC-155

point-to-multipoint service     DTC-148

point-to-point service     DTC-148

semipermanent connections     DTC-156

Sending Complete information element

Taiwan, Hong Kong     DTC-159

switch types

configuration information     DTC-148

configuring     DTC-151

TEI interfaces

configuration (example)     DTC-202

configuring     DTC-173

defaults     DTC-174

TEI negotioation timing

configuring     DTC-156

troubleshooting     DTC-160

V.120 support

PPP on virtual terminal lines     DTC-235

voice calls

incoming (example)     DTC-164

outgoing (example)     DTC-164

isdn caller command     DTC-157

isdn calling-number command     DTC-158, DTC-174

ISDN cause code override     DTC-159

isdn disconnect-cause command     DTC-159

isdn incoming-voice modem command     DTC-174

ISDN LAPB-TA

configuration (example)     DTC-239

encapsulation autodetection     DTC-237

overview     DTC-236

isdn leased-line bri 128 command     DTC-227

isdn leased-line bri command     DTC-227

ISDN Non-Facility Associated Signalling

See NFAS

isdn not-end-to-end command     DTC-158, DTC-159

ISDN PRI

(examples)     DTC-201

analog calls

configuring     DTC-174

B channel

ascending call order (example)     DTC-205

outgoing call order     DTC-177

calling number identification     DTC-174

channel groups

(example)     DTC-205

channelized E1 controllers

configuring     DTC-168

DDR configuration (example)     DTC-204

slot and port numbering     DTC-168

channelized T1 controllers

configuring     DTC-169

DDR configuration (example)     DTC-203

slot and port numbering     DTC-169

configuration self-tests     DTC-177

D-channel serial interface number     DTC-168, DTC-170

DDR configuration requirement     DTC-167

encapsulations

Frame Relay     DTC-171

X.25     DTC-171

Legacy DDR interface

(example)     DTC-230, DTC-232

line configuration requirements     DTC-167

multiple switch types

(example)     DTC-205

configuring     DTC-176

restrictions     DTC-176

NSF call-by-call (example)     DTC-202

point-to-multipoint service     DTC-167

PRI groups

(example)     DTC-205

semipermanent connections

Australia     DTC-173

Sending Complete information element

Taiwan, Hong Kong     DTC-174

serial interfaces

configuring     DTC-170

isdn sending-complete command     DTC-160, DTC-174

isdn service command     DTC-225

isdn spid1 command     DTC-154

isdn spid2 command     DTC-154

isdn switch-type command     DTC-151, DTC-168, DTC-169, DTC-176, DTC-227

isdn tei command     DTC-157, DTC-174

ISO CLNS

DDR

access groups     DTC-303

configuring     DTC-303

K

keepalive command     DTC-263

keepalives

LAT timers     DTC-424

PPP

enabling LQM     DTC-247

translate option     DTC-471

Kerberos security

ARA

enabling     DTC-561

keyboard emulations

IBM 7171

(example)     DTC-441

keymap command     DTC-438

keymaps

alternate     DTC-439

line characteristics     DTC-439

selection priority     DTC-435

selection process (figure)     DTC-436

keymap-type command     DTC-438

keystroke

suspend-session     DTC-134

L

L2F

overview     DTC-469

tunneling     DTC-469, DTC-516

tunneling technology     DTC-469

virtual templates     DTC-469

LAPB

DDR

configuring     DTC-353

LAT

access lists (example)     DTC-430

basic services

configuration (example)     DTC-428

configuring     DTC-421

connections

configuration (examples)     DTC-431

host-initiated     DTC-419, DTC-422

stopping     DTC-427

VMS host     DTC-420

delay

set acknowledgment     DTC-425

description     DTC-409, DTC-417

font selection     DTC-447

group codes (example)     DTC-428

group list

logical names     DTC-422

outgoing connections     DTC-421

groups     DTC-419

group services     DTC-422

high-speed buffer     DTC-421

keepalive timer     DTC-424

master and slave functions     DTC-418

message retransmission limit     DTC-424

multiple connections

starting     DTC-427

outbound session (example)     DTC-429

performance     DTC-425

port name     DTC-420

protocol translations

configuration (examples)     DTC-494  to DTC-513

LAT-to- LAT over an IP WAN (example)     DTC-500

TCP standalone (example)     DTC-513

to LAT via X.25 (example)     DTC-505

to TCP via X.25 (example)     DTC-507

X.25 host (example)     DTC-509

X.25 PAD (examples)     DTC-518

protocol transparency     DTC-421

proxy node

enabling     DTC-423

received messages     DTC-425

rotary group

associating with a service (example)     DTC-430

configuration (example)     DTC-429

service announcements

disabling     DTC-424

services

description     DTC-419

LAN (example)     DTC-429

partitioning by terminal line (example)     DTC-429

sessions

description     DTC-419

maximum virtual circuit     DTC-425

timers

traffic, configuring     DTC-424

virtual circuit, configuring     DTC-424

lat command     DTC-426, DTC-466, DTC-472

lat enabled command     DTC-421

lat group-list command     DTC-422

lat host-buffers command     DTC-425

lat host-delay command     DTC-425

lat out-group command     DTC-421

lat remote-modification command     DTC-422, DTC-426

lat server-buffers command     DTC-425

lat service-announcements command     DTC-423

lat service-group command     DTC-422

lat service-responder command     DTC-423

lat service-timer command     DTC-423

lat vc-sessions command     DTC-425

lat vc-timer command     DTC-424

Layer 2 Forwarding

See L2F

Legacy DDR

dial backup

asynchronous interfaces (example)     DTC-392

ISDN (example)     DTC-392

hubs

(examples)     DTC-354  to DTC-367

(figure)     DTC-344

access lists     DTC-346

AppleTalk (example)     DTC-356

asynchronous interfaces (example)     DTC-358

authentication     DTC-342, DTC-343

Banyan VINES (example)     DTC-356

bridging access control     DTC-346

configuration task flow     DTC-338

configuring     DTC-337  to DTC-367

connections, monitoring     DTC-353

DECnet (example)     DTC-357

dialer group interface assignment     DTC-346

dialer hold queue     DTC-348

dialer interfaces (figure)     DTC-342

dialer rotary group     DTC-341, DTC-344, DTC-348, DTC-349

dialing configuration (example)     DTC-361

Frame Relay     DTC-350  to DTC-352

Frame Relay (examples)     DTC-365

interface diagnostics     DTC-353

ISDN interfaces, enabling     DTC-340

ISO CLNS (example)     DTC-329, DTC-357

LAPB (example)     DTC-367

LAPB, configuring     DTC-353

load threshold     DTC-349

multiple destinations     DTC-344

multiple destinations (example)     DTC-362

PPP (example)     DTC-363

protocol access control     DTC-346

receiving calls     DTC-342

routing access control     DTC-346

timers, enabling     DTC-347

transparent bridging (example)     DTC-354, DTC-355

X.25     DTC-352

X.25 encapsulation (example)     DTC-367

XNS (example)     DTC-358

ISDN NFAS

primary D-channel     DTC-232

non-V.25bis modems     DTC-312

PPP DDR with authentication (example)     DTC-306

PPP DDR without authentication (example)     DTC-304

spokes

2-way client/server (examples)     DTC-326, DTC-333

access lists     DTC-315

AppleTalk configuration (example)     DTC-328

bandwidth on demand     DTC-319

bridging access control     DTC-315

carrier wait time     DTC-318

configuring     DTC-309

connections, monitoring     DTC-323

DECnet configuration (example)     DTC-328

dialer group assignment     DTC-316

dialer hold queue     DTC-318

DTR calls     DTC-312, DTC-313

DTR dialing (example)     DTC-330

Frame Relay     DTC-320, DTC-321

Frame Relay (example)     DTC-335

interface diagnostics     DTC-323

interface idle timer     DTC-317

interface priority in dialer rotary group     DTC-318

IP, configuring     DTC-325

ISDN interfaces, enabling     DTC-311

line down time     DTC-318

multiple calls to single destination     DTC-319

passive interface     DTC-312, DTC-313

protocol access control     DTC-315

single site calls     DTC-313

spoke configuration (examples)     DTC-324  to DTC-336

transparent bridging     DTC-315

transparent bridging (example)     DTC-324, DTC-325

X.25 DTR dialing (example)     DTC-336

X.25 encapsulation     DTC-322

XNS configuration (example)     DTC-329

V.120 incoming calls (example)     DTC-236

line aux command     DTC-74

linecode b8zs command     DTC-170

linecode command     DTC-186

linecode hdb3 command     DTC-168, DTC-181

line coding

NRZI     DTC-48

line numbers

absolute     DTC-22

relative     DTC-22

lines

ARA

configuring     DTC-553

asynchronous

configuring     DTC-21

asynchronous modem

configuring     DTC-27

automatic disconnect

configuring     DTC-66

compared to interfaces     DTC-8

connection protocol

configuring     DTC-457

connections

configuring individual     DTC-77

DDR asynchronous

downtime, enabling     DTC-318

looped-back     DTC-244

modem control

configuring     DTC-60

modems

disabling     DTC-129

parity

configuring     DTC-460

passwords

enabling     DTC-460

relationship to interfaces     DTC-20

reverse Telnet line speed     DTC-411

stop bits

configuring     DTC-460

terminal and keyboard characteristics

configuring     DTC-442

terminal speeds

configuring     DTC-460

tty     DTC-20

types

description     DTC-20

line speeds

configuring     DTC-460

load threshold

dialer rotary     DTC-349

local-area transport

See LAT

logging

vty-asynchronous authentication information     DTC-490

buffer     DTC-490

UNIX syslog server     DTC-491

logical constructs

group asynchronous interfaces     DTC-8

virtual template interfaces     DTC-10

logical interfaces

dialer     DTC-11

virtual access     DTC-12

virtual asynchronous     DTC-14, DTC-233

login authentication command     DTC-461, DTC-559

login authentication nasi command     DTC-143

login command     DTC-460

login local command     DTC-461

login-string command     DTC-411

login tacacs command     DTC-461, DTC-559

loopback (controller) command     DTC-198

loopback diagnostics

description     DTC-197

loopback local (controller) command     DTC-197, DTC-199

loopback remote (controller) command     DTC-198

loopback remote (interface) command     DTC-200

loopbacks

channelized E1

controllers     DTC-198

interface local     DTC-199

channelized T1

interface local     DTC-199

CSU/DSU

remote     DTC-200

LQM

keepalives

enabling LQRs     DTC-247

M

MacIP

clients

monitoring     DTC-564

servers

monitoring     DTC-564

traffic statistics

monitoring     DTC-564

Maintenance Operation Protocol

See MOP

map class

dialer profiles

configuring     DTC-373

map-class dialer command     DTC-223, DTC-374

messages

line-in-use

enabling     DTC-411

Telnet

failed connection     DTC-412

login     DTC-412

successful connection     DTC-412

suppress connection     DTC-413

Microsoft Point-to-Point Compression

See MPPC

MLP

Distributed MLP

configuration (example)     DTC-270

configuring     DTC-261

overview     DTC-261

T3 configuration (example)     DTC-270

topology     DTC-261

mnemonic addressing

character limitations     DTC-548

configuration (examples)     DTC-548

description     DTC-548

format options     DTC-548

modem answer-timeout command     DTC-65, DTC-68

modem at-mode command     DTC-112

modem autoconfigure command     DTC-84

modem autotest command     DTC-117

modem bad command     DTC-130

modem buffer-size command     DTC-113

modem busyout command     DTC-129

modem busyout threshold command     DTC-129

modem callin command     DTC-67

modem callout command     DTC-68

modem connections

individual     DTC-77

multiple     DTC-84

testing     DTC-82

modem cts-required command     DTC-65

modem dialin command     DTC-62, DTC-64

modem dtr-active command     DTC-62

modem hold-reset command     DTC-130

modem inout command     DTC-64

modem management

AT commands     DTC-112

basic modems     DTC-98

busy out modem card     DTC-129

connection speed

verifying     DTC-123

diagnostics     DTC-116, DTC-120

inoperable modems     DTC-130

integrated modem cards     DTC-96

modem activity

monitoring     DTC-104

modem control functions

event buffer     DTC-130

statistics

call-switching     DTC-113

connected AT sessions     DTC-113

event log     DTC-113

event polling     DTC-113

performance     DTC-113

system summary     DTC-113

topologies     DTC-100

modem poll retry command     DTC-113

modem poll time command     DTC-113

modem pooling

benefits     DTC-102

description     DTC-102

monitoring     DTC-105

physical partitioning

description     DTC-105

dial-in (example)     DTC-106

dial-in and dial-out (example)     DTC-108

network topology     DTC-106

restrictions     DTC-103

virtual partitioning

description     DTC-110

dial-in (example)     DTC-111

network topology     DTC-110

modem recovery-time command     DTC-130

modems

56K high-speed     DTC-96

ARA

configuring     DTC-553

automatic dialing     DTC-62

chat scripts     DTC-92

close connection     DTC-65

communication

starting     DTC-81, DTC-133

configuring manually     DTC-86

connections

testing     DTC-134

troubleshooting     DTC-134

data compression     DTC-79, DTC-80

DCD operation     DTC-87

dial-in     DTC-64, DTC-67

dial-out     DTC-64

direct Telnet sessions     DTC-82, DTC-133

DTR interpretation     DTC-87

error correction     DTC-79

external

configuring     DTC-84

factory default settings     DTC-85

flowcontrol

configuring     DTC-87

high-speed

(figure)     DTC-63

configuring     DTC-62

incoming calls     DTC-87

initialization strings

configuring     DTC-85

inoperable

troubleshooting     DTC-130

line configuration

advanced features     DTC-60

continuous CTS (figure)     DTC-66

incoming and outgoing calls (figure)     DTC-64

modem call-in (figure)     DTC-67

modem call-out (figure)     DTC-69

line timing

configuring     DTC-65

non-V.25bis DTR     DTC-312, DTC-340

overview     DTC-25

reverse connections     DTC-68

stored settings     DTC-86

Telebit T-3000

configuring     DTC-568

troubleshooting     DTC-59

V.110 terminal adapter and modem     DTC-95

V.120 asynchronous access     DTC-235

V.34 standard compliance     DTC-98

verifying configuration     DTC-58

XRemote setup     DTC-446

modem shutdown command     DTC-129, DTC-130

modem status-poll command     DTC-113

modes

See command modes

MPPC

compression scheme     DTC-249

protocol field compression flag     DTC-250

multicast

asynchronous serial traffic over UDP     DTC-135

multilink-group command     DTC-263

Multilink PPP     DTC-256  to DTC-260

(example)     DTC-267

bundle     DTC-263

caller ID authentication     DTC-258

configuration (example)     DTC-162

dialer rotary

configuring     DTC-258

interfaces

asynchronous     DTC-256

BRI (examples)     DTC-268

BRI multiple interfaces     DTC-258

BRI single interface     DTC-257

dialer rotary     DTC-258

interleaving

weighted fair queuing     DTC-259

Inverse Multiplexer

configuration (example)     DTC-270

configuring     DTC-261

overview     DTC-261

T3 configuration (example)     DTC-270

topology     DTC-261

multiple BRI     DTC-258

real-time traffic

(example)     DTC-269

interleaving     DTC-259  to DTC-260

interleaving (example)     DTC-269

restriction     DTC-260

rotary group

BRI members, configuring     DTC-259

Stacker compression     DTC-163

weighted fair queuing     DTC-259

Multiple ISDN Switch Types feature

description     DTC-151

use and restrictions     DTC-176

multiple switch types

BRI interface

configuring     DTC-149, DTC-151

PRI interface

configuration (example)     DTC-205

configuring     DTC-176

restrictions     DTC-176

N

NASI

client location requirements     DTC-142

GNS requests     DTC-143

network resource access     DTC-141

RCONSOLE line     DTC-142

SAP filters

configuring     DTC-143

NetBEUI

connection information     DTC-280

remote clients over PPP     DTC-280

NetBIOS Extended User Interface

See NetBEUI

NetWare Asynchronous Services Interface

See NASI

Network-Specific Facilities

See NSF

NFAS

alternate route index     DTC-224

switch types     DTC-224

no form of a command

using     xliii

Non-Facility Associated Signalling

See NFAS

nonreturn to zero inverted

See NRZI

notes

usage in text     xxxv

notify command     DTC-411

NRZI

encoding     DTC-48

nrzi-encoding command     DTC-48

NSF

call-by-call support

configuring     DTC-175

restriction     DTC-175

O

P

packet assembler/disassembler

See PAD

PAD

Legacy X.3 mode

configuration (examples)     DTC-542

connections     DTC-527

switching sessions     DTC-541

user interface     DTC-540

X.3 parameters     DTC-541

mnemonic remote addressing

character limitations     DTC-548

configuration (examples)     DTC-548

description     DTC-548

format options     DTC-548

network topologies     DTC-527

parameters

(example)     DTC-542

setting     DTC-541

service signals

French language     DTC-530

X.28 mode

applications     DTC-530

command signals     DTC-531

configuration (examples)     DTC-536

configuring     DTC-530

overview     DTC-529

X.3 parameters, configuring     DTC-533

X.3 connections     DTC-532

XOT

enabling     DTC-543

pad command     DTC-466, DTC-472, DTC-540

PAD subaddressing

configuring     DTC-546

debug output     DTC-547

line command output     DTC-547

tty lines (examples)     DTC-547

vty lines (examples)     DTC-547

PAP

authentication request     DTC-245

CHAP authentication order     DTC-246

enabling     DTC-487

vty lines

PPP     DTC-487

parameter command     DTC-534

parity

configuring     DTC-460

parity command     DTC-460

Password Authentication Protocol

See PAP

password command     DTC-460

passwords

enabling     DTC-460

peer default ip address command     DTC-71, DTC-254

peer default ip address pool command     DTC-253

peer default ip address pool dhcp command     DTC-253

peer neighbor-route command     DTC-255

physical-layer command     DTC-70

ping command     DTC-197, DTC-199

point of presence

See POP

Point-to-Point Protocol

See PPP

POP

remote     DTC-277

PPP

AppleTalk over

configuring     DTC-276

AppleTalk Remote Access

configuring     DTC-552

AppleTalk zones

(example)     DTC-40

asynchronous access

ISDN lines     DTC-235

automatic sessions

starting     DTC-74

CHAP and PAP

authentication order     DTC-246

compressions

hardware-dependent     DTC-248

lossless data     DTC-247

Microsoft     DTC-249

platform support     DTC-248

software     DTC-247

connections     DTC-278

encapsulations

enabling     DTC-246

interfaces, configuring     DTC-314, DTC-345

Legacy DDR     DTC-343

half-bridging

(figure)     DTC-255

configuring     DTC-255

IP

address negotiation     DTC-250

address pooling     DTC-250

IP over

configuring     DTC-274

IPX

asynchronous interfaces     DTC-275

configuring     DTC-274

dedicated network numbers (example)     DTC-41

header compression     DTC-281

loopback interfaces (example)     DTC-41

IPX over

vty lines     DTC-484

IPX-PPP

vty lines, configuring     DTC-42

LAT

translations     DTC-514

Magic Number support     DTC-244

Microsoft Point-tp-Point Compression

See MPPC

MPPC

compression scheme     DTC-249

protocol field compression flag     DTC-250

network-layer protocols

configuring     DTC-274

peer neighbor routes

dialer interface effect     DTC-255

disabling     DTC-254

group-async interface effect     DTC-255

PPP-IP

asynchronous interfaces, configuring     DTC-40

reliable link     DTC-254

SLIP banner     DTC-283

(example)     DTC-285

tokens     DTC-283

SLIP BOOTP requests     DTC-272

telecommuting configuration (example)     DTC-272

X.25

tunneling (example)     DTC-515

ppp authentication chap command     DTC-258, DTC-314, DTC-343, DTC-345, DTC-374

ppp authentication command     DTC-246

ppp authentication pap command     DTC-258, DTC-343

ppp bridge appletalk command     DTC-256

ppp bridge ip command     DTC-256

ppp bridge ipx command     DTC-256

ppp command     DTC-278

ppp multilink command     DTC-257, DTC-258, DTC-263

ppp multilink fragmentation command     DTC-263

PPP on virtual terminal lines     DTC-271

ppp quality command     DTC-247

ppp reliable-link command     DTC-254

ppp use-tacacs command     DTC-246, DTC-342

PRI

See ISDN PRI

pri-group command     DTC-168, DTC-170

pri-group timeslots nfas_d command     DTC-225

Primary Rate Interface

See ISDN PRI

printer connections

See connections, printers

privileged EXEC mode

summary     xl

privilege level command     DTC-460

prompts

system     xl

protocols

Combinet Proprietary Protocol     DTC-171, DTC-228

preferred conection

configuring     DTC-457

preferred transport

configuring     DTC-458

terminal transport

configuring     DTC-457

protocol translations

applications

configuration (examples)     DTC-494  to DTC-504

basic configuration (example)     DTC-495

central site (example)     DTC-498

LAT-to-LAT

Frame Relay or SMDS (example)     DTC-502

IP WAN (example)     DTC-500

via X.25 (example)     DTC-505

LAT-to-PPP (example)     DTC-514

LAT-to-TCP local translation (example)     DTC-511

LAT-to-TCP over a WAN (example)     DTC-506

LAT-to-TCP via X.25 (example)     DTC-507

LAT-to-X.25 host (example)     DTC-509

one-step method

configuring     DTC-465, DTC-466

overview     DTC-465

TCP-to-X.25-host connections (example)     DTC-522

parameters

changing dynamically (example)     DTC-523, DTC-524

PPP over X.25 tunneling (example)     DTC-514

sessions

supported     DTC-473, DTC-482

TCP-to-SLIP translations     DTC-514

tunneling PPP over X.25 (example)     DTC-515

two-step method     DTC-472

configuring     DTC-466, DTC-472

for TCP-to-PAD connections (example)     DTC-522

general purpose gateway     DTC-472

overview     DTC-466

virtual asynchronous interfaces

tunneling protocols     DTC-467

virtual interface templates

benefits     DTC-469

configuring     DTC-467, DTC-488

virtual templates

two-step, configuring     DTC-468

X.25 PAD-to-LAT (example)     DTC-518

X.25 PAD-to-TCP (example)     DTC-520

X.25-to-PPP tunneling (example)     DTC-515

pulse-time command     DTC-49