Index: Cisco IOS Dial Services Command Reference, Release 12.1
Symbols A B C D E F G H I K L M N O P Q R S T U V W X
Symbols
- ? command ix, xv
A
- AAA
- virtual profiles
- configuring DR-844
- aaa authorization configuration default command DR-2
- aaa group-configuration command DR-3
- aaa route download command DR-5
- AAA server
- dialer access DR-125
- group
- configuring DR-3
- static route configuration
- downloading DR-2
- abbreviating commands
- context-sensitive help viii, ix, xv
- absolute-timeout command DR-6
- accept dialin command DR-7
- accept dialout command DR-9
- access-class (LAT) command DR-11
- access control
- ARA DR-16, DR-17, DR-22
- LAT
- access conditions DR-317
- connections DR-11
- group list DR-325
- group list name assignments DR-320
- access list command DR-922, DR-928
- access lists
- DDR
- dialing control DR-154
- types and numbers supported (table) DR-154
- anchoring
- regular expressions DR-926
- AO/DI
- BAP number
- formats DR-440
- prefix DR-441
- clients
- enabling DR-877
- mapping DR-878
- multilink PPP bundle
- receive only mode DR-458
- ARA
- access control DR-16, DR-17, DR-22
- clients
- virtual terminal line connection DR-804, DR-813, DR-822
- monitoring DR-531
- sessions
- automatic startup DR-35
- arap authentication command DR-13
- arap callback command DR-13
- arap dedicated command DR-14
- arap enable command DR-15
- arap net-access-list command DR-16
- arap network command DR-17
- arap noguest command DR-18
- arap require-manual-password command DR-19
- arap timelimit command DR-20
- arap warningtime command DR-21
- arap zonelist command DR-22
- ASCII
- start character DR-766
- stop character DR-769
- async default ip address command
- See peer default ip address command
- async default routing command DR-24
- async dynamic address command DR-25
- async dynamic routing command DR-26
- asynchronous interfaces
- AUX port configured as DR-24
- group ranges DR-212
- members DR-367
- routing
- configuring manually DR-26
- async mode dedicated command DR-28
- async mode interactive command DR-29
- AT
- modem attention commands DR-665
- authen before-forward command DR-30
- authentication translate option
- mapping to virtual interface template command DR-810, DR-831
- autocommand command DR-31
- autoconfigure discovery command DR-372
- autodetect encapsulation command DR-32
- autohangup command DR-34
- automatic protocol startup
- ARA DR-35
- PPP DR-35
- SLIP DR-35
- autoselect command DR-35
- AUX port
- asynchronous interface DR-24
B
- backup command DR-37
- backup delay command DR-39
- backup interface command DR-40
- backup interface dialer command DR-41
- backup load command DR-43
- BACP
- enabling DR-455
- Bandwidth Allocation Protocol
- See BACP
- bandwidth on demand
- DDR DR-156
- baud rates
- receive
- configuring for a line DR-501, DR-762
- transmit
- configuring for a line DR-762, DR-843
- X.3 PAD parameters DR-916
- BGP
- IP access (example) DR-928
- regular expression filtering DR-922
- buffers
- XRemote
- size of DR-893
- busy-message command DR-44
C
- callback
- ARA DR-13
- ARA protocol chat scripts DR-506
- dialer interface, non-DTR DR-451
- enabling DR-129, DR-519
- EXEC chat scripts DR-508
- forced wait period
- configuring DR-49
- PPP client DR-451, DR-452
- PPP server DR-451
- router acceptance
- enabling DR-119
- secure
- configuring DR-127
- callback forced-wait command DR-49
- called-number command DR-50
- call progress tone
- monitoring DR-535
- call progress tone country command DR-47
- calls
- caller ID screening DR-132
- configuring DR-248
- platform support DR-248
- disconnect ISDN DR-254
- incoming channel-associated signalling
- configuring DR-53
- incoming reject count DR-707
- ISDN three-way conference DR-252
- limit overflow DR-344
- monitoring total E1 DR-548
- monitoring total on T1 DR-552
- NSF on ISDN PRI
- configuring outgoing voice DR-263
- outoging information transfer capability
- configuring DR-264
- reject type of
- configuring DR-52
- voice and data call priority
- configuring DR-286
- call-switching module
- modem response time DR-403
- call switching modules
- monitoring DR-550, DR-554
- call-type cas command DR-53
- call-type command DR-52
- carrier wait time
- DDR
- interface, disabling DR-190
- map class DR-191
- cas-custom command DR-54
- cas-group (e1 controller) command DR-61
- cas-group (t1 controller) command DR-66
- cautions
- usage in text ix
- CCL scripts
- modified and unmodified together DR-36
- CCO
- accessing x
- definition x
- channel-group command DR-71
- channelized E1
- channel groups DR-71
- controller statistics DR-111, DR-545
- frame type DR-211
- loopback
- local interface DR-362
- serial interface DR-221
- channelized T1
- channel groups DR-71
- frame type DR-211
- loopback
- local interface DR-362
- local on entire line DR-361
- serial interface DR-221
- channels
- switched 56K data
- monitoring DR-550, DR-554
- CHAP
- DDR DR-161
- character mapping
- configuring DR-792
- displaying TN3270 DR-735
- chat-script command DR-73, DR-927
- chat scripts
- ARA protocol-callback DR-506
- create DR-73
- DDR DR-512
- escape sequences
- (table) DR-74
- example DR-927
- EXEC callback DR-508
- expect-send pairs
- sample (table) DR-75
- naming conventions DR-73, DR-512
- physical terminal lines DR-504, DR-506, DR-508
- SLIP and PPP backward compatibility DR-520
- starting
- because of incoming connections DR-510
- from the EXEC DR-767
- manually for a line DR-767
- on line activation DR-504
- on line reset DR-514
- on system startup DR-516
- CIPX
- IPX
- compression on PPP links DR-236
- Cisco Connection Online
- See CCO
- Cisco Easy IP
- address negotiation DR-224
- Cisco IOS
- saving configuration changes xviii
- clear controller command DR-77
- clear cot summary command DR-78
- clear counters (async) command DR-79
- clear counters line command DR-81
- clear dialer command DR-83
- clear dialer dnis command DR-84
- clear entry command DR-87
- clear interface command DR-88
- clear interface virtual-access command DR-90
- clear ip route download DR-91
- clear ip route download command DR-91
- clear line command DR-92
- clear modem command DR-93
- clear modem counters command DR-95
- clear modempool-counters command DR-97
- clear resource-pool command DR-99
- clear rlm group command DR-101
- clear snapshot quiet-time command DR-103
- clear vpdn history failure command DR-104
- clear vpdn tunnel command DR-105
- clock source command DR-106
- clock source line command DR-106
- Combinet Proprietary Protocol
- See CPP
- command modes
- summary (table) xiv
- Common Command Language
- See CCL
- configuration, saving xviii
- connect command DR-108, DR-315, DR-772
- connections
- display open DR-876
- LAT DR-315 to DR-316
- limit simultaneous DR-343
- mobile remote node DR-842
- NASI client DR-239
- NetBEUI DR-693
- enabling DR-415
- notification of pending output DR-491
- PPP DR-428
- queued host-initiated
- clearing entries DR-87
- refuse full duplex DR-776
- reverse DR-382, DR-393
- rlogin DR-494, DR-496, DR-497, DR-770 to DR-773
- SLIP DR-757
- status of open DR-721
- switching between DR-490, DR-492
- Telnet DR-770 to DR-773
- configuring line DR-777
- TN3270 DR-789
- X.3 PAD DR-886
- XRemote DR-888, DR-892, DR-896
- console port
- configuring DR-346
- controller command DR-111
- controllers
- E1
- analog R2 signalling, configuring DR-63
- calls, monitoring DR-548
- call signals, configuring DR-63
- channel-associated signalling, configuring DR-61
- clock source, configuring DR-106
- configuring DR-111
- loopback, configuring DR-360
- timeslots, configuring DR-71
- T1
- channelized timeslots, configuring DR-66
- configuring DR-111
- monitoring calls DR-552
- R1 channel-associated signalling, configuring DR-66
- robbed-bit signalling, configuring DR-66
- timeslots, configuring DR-71
- copy modem command DR-113
- COT
- monitoring DR-556, DR-560
- CPP
- authentication negotiation DR-117
- enabling DR-117
- callback acceptance
- configuring DR-119
- encapsulations DR-201
- half-bridging DR-201
- PPP support DR-117
- cpp authentication command DR-117
- cpp callback accept command DR-119
D
- data terminal ready
- See DTR
- DDR
- bandwidth on demand DR-156
- carrier wait time
- interface DR-190
- map class, configuring DR-191
- chat scripts DR-512
- configuring DR-73
- sample expect-send pairs (table) DR-75
- dialer hold queue
- dialers supported DR-144
- rotary groups DR-144
- dialer interface statistics
- clearing DR-83
- dialer list
- configuring DR-153
- dialer load threshold
- configuring DR-156
- dialer pool ISDN B channels
- maximum number DR-174
- minimum number DR-174
- dialer profile
- CHAP or PAP username DR-178
- configuring DR-178
- dialer interface data display DR-564, DR-570
- dialer pool, configuring DR-172
- dialer pool and dialer pool-member (example) DR-172
- dialer pool members DR-174
- dial string DR-185
- links, maximum number DR-170
- link to physical interface DR-174
- dialer rotary groups
- interface priority, configuring DR-176
- interfaces DR-181
- dialing pool
- dialer profile DR-172
- DTR dialing
- not for rotary group (hunt group) leaders DR-138
- outgoing calls only DR-138
- receive calls DR-138
- remote interface passive DR-138
- remote interface to terminate calls DR-138
- show dialer display DR-566
- interface diagnostics display DR-564, DR-570
- interface timeout
- configuring DR-139
- legacy
- dialer map for outbound calls DR-158
- dialer map ISDN interfaces DR-164, DR-167
- dial string DR-186
- dial string-telephone number DR-183
- enabling DR-148
- forwarding broadcasts DR-163, DR-166
- ISDN Advice of Charge, BRI (example) DR-164
- single site dial string DR-183, DR-186
- single telephone number DR-186
- snapshot routing DR-168
- line idle time DR-145
- map-class idle time
- configuring DR-147
- outbound calls
- best line DR-182
- protocol address for broadcasts DR-159
- single DDR telephone number DR-183, DR-191
- supported access list types and numbers (table) DR-154
- telephone number
- configuring single DR-186
- DEC LAT
- See LAT
- DECnet
- access list (example) DR-928
- regular expression filtering DR-922
- default (VPDN) command DR-121
- default form of a command
- using xvii
- delta
- telephone number dialed digits DR-441
- description command DR-123
- DHCP
- IP address pooling DR-225
- server
- configuring DR-228
- settings DR-562
- dial backup
- line delay
- configuring DR-39
- secondary line
- configuring DR-40, DR-41
- traffic load threshold
- configuring DR-43
- dialer aaa command DR-125
- dialer callback-secure command DR-127
- dialer callback-server command DR-129
- dialer called command DR-131
- dialer caller command DR-132
- dialer command DR-124
- dialer congestion threshold command DR-134
- dialer dnis group command DR-135
- dialer dns command DR-137
- dialer dtr command DR-138
- dialer enable-timeout command DR-139
- dialer fast-idle (interface configuration) command DR-140
- dialer fast-idle (map-class dialer configuration) command DR-142
- dialer-group command DR-143
- dialer groups
- interface assignment DR-143
- dialer hold queue
- dialers supported DR-144
- rotary groups DR-144
- dialer hold-queue command DR-144
- dialer idle-timeout (interface configuration) command DR-145
- dialer idle-timeout (map-class dialer configuration) command DR-147
- dialer in-band command DR-148
- dialer isdn command DR-150
- dialer isdn short-hold command DR-151
- dialer-list protocol command DR-153
- dialer load-threshold command DR-145, DR-156, DR-456
- dialer map
- configuring DDR DR-160
- DTR dialing DR-138
- form used for ISDN semipermanent connections DR-166
- for outbound calls DR-158
- ISDN Advice of Charge
- usage guidelines DR-164
- ISDN semipermanent connections DR-158
- map class name DR-364
- dialer map (AOC) command DR-163
- dialer map (SPC) command DR-166
- dialer map bridge command DR-158
- dialer map command DR-158, DR-922
- dialer map snapshot command DR-168
- dialer max-link command DR-170
- dialer outgoing command DR-171
- dialer pool command DR-172
- dialer pool-member command DR-174
- dialer priority command DR-176
- dialer remote-name command DR-178
- dialer reserved-links command DR-179
- dialer rotary-group command DR-180
- dialer rotary groups
- configuring DR-219
- interface priority
- configuring DR-176
- interfaces
- configuring DR-181
- dialer rotor command DR-182
- dialer string (dialer profiles) command DR-185
- dialer string (legacy DDR) command DR-186
- dialer string command DR-183
- dialer voice-call command DR-188
- dialer vpdn command DR-189
- dialer wait-for-carrier-time (interface configuration) command DR-190
- dialer wait-for-carrier-time (map-class dialer configuration) command DR-191
- dialer watch-disable command DR-192
- dialer watch-group command DR-193
- dialer watch-list command DR-194
- dialing delay
- configuring DR-255
- dial string
- configuring telephone number DR-183, DR-185
- disconnect command DR-195
- disconnect warning time
- configuring DR-21
- dispatch-timeout command DR-734
- DNIS
- groups
- configuring Dialer DR-135
- counter statistics, clearing DR-84
- dnis group command DR-196
- DNS
- addresses
- configuring IPCP ngotiation DR-453
- domain command DR-197
- domain names
- VPDN groups
- support for additional DR-197
- ds0 busyout command DR-199
- DTR dialing
- dialer map and dialer string command effect on DR-138
- not for rotary group (hunt group) leaders DR-138
- outgoing calls only DR-138
- remote interface configured to terminate calls DR-138
- remote interface passive only DR-138
E
- E1 R2
- country settings DR-55
- country support DR-55
- parameters
- configuring DR-55
- EIA/TIA-232
- handshake DR-499
- encapsulation cpp command DR-201
- encapsulations
- automatic detection on serial or ISDN interface DR-32
- escape character
- EXEC prompt DR-888
- exec-timeout command DR-734
F
- fast idle timer
- interface
- configuring DR-140
- map class
- configuring DR-142
- firmware
- copy modem DR-113
- firmware location command DR-203
- firmware upgrade command DR-205
- flow control
- configuring for a line DR-207
- input X.3 PAD parameters DR-917
- start character DR-766
- stop character DR-769
- flowcontrol command DR-207
- force-local-chap command DR-209
- forwarding mask
- X.3 PAD DR-914
- framing command DR-211
G
- global configuration mode
- summary xiv
- global translation options
- translate command DR-806, DR-815, DR-824
- translate lat command DR-809
- translate tcp command DR-819
- translate x25 command DR-830
- group range command DR-212
- guests
- allowing DR-18
- disallowing DR-18
H
- half-bridging
- AppleTalk DR-446
- Combinet devices not supporting PPP DR-201
- Ethernet subnetwork DR-446, DR-448, DR-449
- IP DR-448
- IPX DR-449
- hardware flow control
- configuring for a line DR-207
- header compression
- statistics DR-593
- translate options
- map to virtual interface template DR-810, DR-831
- help command viii, ix, xv
- host-failed message
- configuring DR-44
I
- idle time
- DDR
- configuring line DR-145
- configuring map-class DR-147
- idle timer
- multilink PPP and dialer-load threshold DR-145, DR-156, DR-456
- initiate-to command DR-213
- interface bri command DR-216
- interface command
- IP
- addresses
- configuring DR-215
- interface configuration mode
- summary xiv
- interface dialer command DR-219
- interface multilink command DR-220
- interfaces
- asynchronous
- DDR dialer maps, configuring DR-160
- backup
- configuring DR-40, DR-41
- descriptions in configuration DR-123
- dialer
- diagnostic display DR-564
- dialer statistics
- clearing DR-83
- ISDN
- configuring for DDR DR-159, DR-164, DR-167
- half-bridge, configuring DR-446, DR-448, DR-449
- multilink bundle
- configuring DR-413
- point-to-point authentication retries DR-454
- PRI channel service state DR-273
- serial
- dialer maps, configuring for DDR DR-159
- half-bridge, configuring DR-446, DR-448, DR-449
- virtual template
- configuring DR-223
- interface serial command DR-221
- interface virtual-template command DR-223, DR-847
- IP
- addresses
- pools, defining local DR-230
- pools, enabling DR-225
- pool settings DR-589
- returned to remote peer DR-423
- TCP port assignment DR-227
- backup endpoint addresses
- configuring VPDN DR-37
- ip address negotiated command DR-224
- ip address-pool command DR-225
- ip alias command DR-227
- ip as-path access-list command DR-922, DR-928
- ip dhcp-server command DR-228
- ip local-pool command DR-230
- ip-pool translate option
- mapping to virtual interface template command DR-831
- map to virtual interface template DR-810
- ip route command DR-232
- ip rtp reserve command DR-234
- ip tcp async-mobility server command DR-235
- IPX
- client connection to asynchronous interface DR-237
- loopback interfaces DR-806, DR-815, DR-824
- over PPP DR-237
- clients connecting to virtual terminal lines DR-815, DR-824
- on VTY lines DR-868
- virtual terminal lines DR-806
- ipx compression cipx command DR-236
- ipx loopback translate option
- mapping to virtual interface template command DR-810, DR-831
- ipx nasi-server enable command DR-239
- ipx ppp-client command DR-237
- ISDN
- 128 kbps leased-line service DR-260
- active calls
- displaying DR-598
- Advice of Charge
- short-hold timer DR-151
- static idle timer and short-hold timer (example) DR-151
- automatic encapsulation detection DR-32
- B1 channel SPID
- configuring DR-275
- B channel
- false busy signal DR-246
- called-party number verification DR-242
- call history
- displaying DR-598
- calling number identification DR-250
- call speed origin and delivery mismatch DR-262
- call transferring
- configuring DR-284
- channel service states DR-273
- data call DR-247
- disconnect DR-254
- DDR configuration DR-247
- default type and plan DR-261
- dialer maps
- configuring for DDR DR-159
- legacy DDR, configuring DR-164, DR-167
- Layer 2 and Layer 3 timers DR-598
- memory pool statistics DR-598
- NFAS
- DDR primary D-channel only DR-463
- primary and backup D-channels DR-463
- NFAS group members and channels
- displaying DR-604
- outbound calls
- best line DR-182
- outgoing calls
- Alerting information element DR-270
- Sending Complete information element DR-271
- Overlap Receiving DR-265
- PRI
- slave or master selection DR-266
- semipermanent connections (Germany) DR-150, DR-158
- subaddresses
- configuring DR-183
- dialer string DR-186
- multipoint connections DR-159, DR-163, DR-166
- switches
- random-length delay, configuring DR-285
- switch types DR-279
- See also ISDN PRI, Multiple Switch Types feature
- three-way conference call
- configuring DR-252
- voice and data call priority DR-286
- isdn all-incoming-calls-v120 command DR-241
- isdn answer1 command DR-242
- isdn answer2 command DR-242
- isdn autodetect command DR-244
- isdn bchan-number-order command DR-245
- ISDN BRI
- configuring DR-216
- field descriptions (table) DR-542
- information display DR-541
- leased-lines
- synchronous serial DR-260
- line power DR-348
- monitoring interface DR-538
- SPIDs
- automatic detection, configuring DR-244
- local directory numbers DR-275
- subinterfaces
- BRI multipoint, point-to-point DR-216
- isdn busy command DR-246
- isdn caller command DR-248
- isdn calling-number command DR-250
- isdn call interface command DR-247
- isdn conference-code command DR-252
- isdn disconnect interface command DR-254
- isdn fast-rollover-delay command DR-255
- isdn leased-line bri 128 command DR-260
- isdn map command DR-261
- isdn not-end-to-end command DR-262
- isdn nsf-service command DR-263
- isdn outgoing-voice command DR-264
- isdn overlap-receiving command DR-265
- ISDN PRI
- B channel order selection DR-245
- calling number identification DR-250
- Multiple ISDN Switch Types feature
- restrictions DR-281
- services status DR-598
- switch types (table) DR-281
- isdn protocol-emulate command DR-266
- isdn send-alerting command DR-270
- isdn sending-complete command DR-271
- isdn service command DR-273
- isdn spid1 command DR-275
- isdn switch-type (BRI) command DR-277
- isdn switch-type (PRI) command DR-280
- isdn tei command DR-283
- isdn transfer-code command DR-284
- isdn twait-disable command DR-285
- isdn voice-priority command DR-286
- isdn x25 dchannel command DR-288
- isdn x25 static-tei command DR-290
K
- keepalive translate option
- mapping to virtual interface template command DR-810, DR-831
- keyboard mapping
- charactersitics DR-291
- keymap command DR-291, DR-299
- keymaps
- custom DR-293
- default DR-293
- special characters DR-292
- syntax DR-293
- keymap-type command DR-298
- keys
- Break DR-359
L
- l2f ignore-mid-sequence command DR-299
- l2tp drop out-of-order command DR-300
- l2tp flow-control backoff-queuesize command DR-301
- l2tp flow-control maximum-ato command DR-302
- l2tp flow-control receive-window command DR-303
- l2tp flow-control static-rtt command DR-305
- l2tp hidden command DR-306
- l2tp ip tos reflect command DR-308
- l2tp ip udp checksum command DR-310
- l2tp offset command DR-311
- l2tp tunnel authentication command DR-312
- l2tp tunnel hello command DR-313
- l2tp tunnel password command DR-314
- LAPB
- Numbered Mode negotiation DR-461
- LAPB-TA
- encapsulations
- dynamic detection DR-32
- LAT
- access control
- access conditions DR-317
- group list DR-325
- group list name assignments DR-320
- on connections DR-11
- active sessions DR-614
- associate rotary group with a service DR-337
- available services list DR-315, DR-613
- connection queue entry
- clearing DR-87
- connections DR-315 to DR-316
- description DR-315
- enabling DR-319
- group code mask
- configuring DR-332
- inbound connections
- enabling DR-331
- keepalive timer
- configuring DR-323
- learned services DR-613, DR-719
- maximum number of sessions
- configuring DR-339
- multiple connections DR-315
- node name DR-324
- password for a service
- configuring DR-334
- pattern matching symbols (table) DR-317
- protocol translation options DR-813, DR-823
- proxy node
- configuring DR-336
- receive buffers
- host DR-322
- server DR-329
- service advertisement timer DR-338
- service announcements
- configuring DR-330
- reenabling DR-330
- service identification
- configuring DR-333
- static service rating
- configuring DR-335
- transmission interval
- configuring DR-340
- lat access-list command DR-317
- lat command DR-315
- lat enabled command DR-319
- lat group-list command DR-320
- lat host-buffers command DR-322
- lat ka-timer command DR-323
- lat node command DR-324
- lat out-group command DR-325
- lat remote-modification command DR-327
- lat retransmit-limit command DR-328
- lat server-buffers command DR-329
- lat service-announcements command DR-330
- lat service enabled command DR-331
- lat service-group command DR-332
- lat service ident command DR-333
- lat service password command DR-334
- lat service rating command DR-335
- lat service-responder command DR-336, DR-338
- lat service rotary command DR-337
- lat service timer command DR-338
- lat service-timer command DR-338
- lat vc-sessions command DR-339
- lat vc-timer command DR-340
- Layer 2 Forwarding
- tunnel information display DR-742
- lcp renegotiation command DR-341
- limit base-size command DR-343
- limit overflow-size command DR-344
- line command DR-345
- line feed
- insertion
- X.3 PAD parameters DR-917
- padding
- X.3 PAD parameters DR-918
- line-power command DR-348
- lines
- absolute number DR-346
- activity status DR-533
- ARA connections
- configuring DR-14, DR-15
- automatic disconnect DR-34
- auxiliary number DR-346
- characteristics
- configuring DR-327
- configuring DR-345
- console port DR-346
- dedicated ARA-only
- configuring DR-14
- dedicated asynchronous mode
- configuring DR-28
- disconnecting DR-195
- discover type of modem DR-372
- folding X.3 DR-916
- fractional data DR-111
- incoming and outgoing calls DR-394
- interactive mode
- configuring DR-29
- line configuration mode DR-340, DR-345
- relative line number DR-345
- rotary DR-499
- session limits DR-523
- status DR-740
- types
- (table) DR-346
- virtual terminal DR-346
- link (RLM) command DR-349
- Link Quality Monitoring
- See LQM
- loadsharing command DR-351
- Local Area Transport
- See LAT
- local name command DR-352
- logging
- VPDN
- events DR-857
- logging in
- Break key DR-359
- configuring username DR-355
- login (EXEC) command DR-355
- login (line) command DR-357
- login-string command DR-359
- loopback
- channel-group DR-362
- from MIP over dedicated T1 link DR-363
- T1 line DR-361
- virtual terminal line assignment DR-868
- loopback (controller) command DR-360
- loopback interfaces
- IPX network assignment DR-237
- loopback local (controller) command DR-361
- loopback local (interface) command DR-362
- loopback remote (controller) command DR-363
- LQM
- enabling DR-460
M
- map class
- dialer map DR-364
- map-class dialer command DR-364
- member command DR-367
- messages
- failed connection DR-44
- login DR-44, DR-359
- successful connection DR-44, DR-359
- modem answer-timeout command DR-368, DR-734
- modem at-mode command DR-369
- modem at-mode-permit command DR-371
- modem autoconfigure discovery command DR-372
- modem autoconfigure type command DR-373
- modem autotest command DR-374
- modem bad command DR-376, DR-499
- modem buffer-size command DR-378
- modem busyout command DR-379
- modem callin command DR-381
- modem callout command DR-382, DR-499
- modemcap edit command DR-408
- modemcap entry command DR-409
- modem country mica command DR-383
- modem country microcom_hdms command DR-386
- modem cts-required command
- See modem printer command
- modem dialin command DR-390
- modem dtr-active command DR-391
- modem hold-reset command DR-392
- modem host command DR-393
- modem inout command DR-394
- modem min-speed max-speed command DR-395
- modem poll retry command DR-396
- modem poll time command DR-397
- modem-pool command DR-411
- modem printer command DR-398
- modem recovery action command DR-399
- modem recovery maintenance command DR-400
- modem recovery threshold command DR-402
- modem recovery-time command DR-403
- modem ri-is-cd command
- See modem dialin command
- modems
- answer timeout DR-368
- AT command mode DR-369
- attributes display DR-688
- autoconfigure DR-373
- AUX (table) DR-901
- call switching module
- monitoring DR-646
- chat scripts DR-512, DR-899
- DDR DR-512
- default DR-512
- cookie
- displaying DR-645
- create pool DR-411
- diagnostic test DR-374, DR-406
- dialer hold queue DR-144
- digital DR-665
- disabling DR-379
- disconnect reasons DR-632
- discovery mode DR-372
- displaying configuration DR-637
- displaying firmware version DR-657, DR-682
- DSR control signal DR-398
- EC/compression DR-899
- (table) DR-899
- edit attribute values DR-408
- firmware upgrade DR-203
- forced reconnection waiting period
- configuring DR-49
- history event queue size DR-378
- history log DR-648
- incoming-only calls DR-390
- inoperable DR-376
- isolating DR-392
- MICA digital
- statistics DR-661
- MICA technologies DR-665
- bit rates DR-668
- character count DR-675
- constellation shaping DR-671
- country codes DR-383
- echo levels DR-674
- error counts DR-667
- frequency offset DR-673
- line shaping graph DR-676
- nonlinear encoding DR-671
- performance statistics (table) DR-667
- phase jitter frequency DR-673
- phase roll DR-674
- preemphasis index DR-671
- received signal DR-672
- receive signal quality DR-667
- robbed bits DR-675
- round trip delay DR-675
- transmit signal DR-672
- trellis coding DR-671
- Microcom
- country codes DR-386
- direct-connect session DR-371
- session status DR-631
- Microcom digital
- statistics DR-665
- monitoring connection speeds DR-641
- off-hook status DR-381
- operation summary DR-680
- performance statistics DR-623
- platform-specific (table) DR-901
- polling attempts DR-396
- poll interval DR-397
- pools
- line range DR-426
- statistics DR-678
- record capability values DR-409
- recovery action DR-399
- recovery behavior DR-400
- recovery process DR-402
- response time DR-403
- scripts (examples) DR-903
- shutdown DR-405
- speed parameters DR-395
- status polling DR-407
- testing DR-681
- troubleshooting DR-902
- upgrade method selection DR-205
- modem shutdown command DR-405
- modem startup-test command DR-406
- modem status-poll command DR-407
- modes
- See command modes
- mtu translate option
- mapping to virtual interface template command DR-810, DR-831
- multilink-group command DR-414
- Multilink PPP
- bundle
- configuring DR-458
- information display DR-700
- SGBP bid winner on DR-528
- multilink virtual-template command DR-413
- Multiple ISDN Switch Types feature
- restrictions DR-281
- multipliers
- regular expressions DR-924
N
- NASI
- clients
- enabling DR-239
- connection status
- displaying DR-594
- TTY lines
- connecting through DR-239
- VTY lines
- connecting through DR-239
- NBF
- sessions display DR-693
- NetBEUI
- connection information display DR-693
- remote node
- configuring DR-415
- NetBIOS
- Sessions Table DR-693
- netbios nbf command DR-415
- NetWare Asynchronous Services Interface
- See NASI
- network-clock-priority command DR-416
- network-clock-select command DR-418
- node name
- change LAT DR-324
- no form of a command
- using xvii
- notes
- usage in text ix
- number command DR-420
O
- online documentation
- See CCO
P
- PAD
- log on DR-421
- Macintosh connection DR-804, DR-813, DR-822
- parameters
- configuring DR-886
- setting DR-487 to DR-490
- See also X.3 PAD
- pad command DR-421
- parameter-setting command DR-914
- parentheses
- using in regular expressions DR-927
- password command DR-423
- passwords
- ARAP DR-19
- CPP authentication DR-117
- line assignment DR-423
- pattern matching
- description DR-921
- See also regular expressions
- patterns
- multiple-character
- anchoring DR-926
- creating DR-924
- description DR-922
- multipliers DR-924
- single-character
- anchoring DR-926
- creating DR-922
- description DR-922
- multipliers DR-924
- peer default IP address command DR-423
- Point-to-Point Protocol
- See PPP
- pool-member command DR-425
- pool-range command DR-426
- port numbers
- Telnet DR-500
- PPP DR-428
- authentication retries
- configuring DR-454
- BACP
- bundle group display DR-698
- callback configuration DR-431
- call parameters DR-429
- define link type DR-435
- dialer load threshold DR-439
- drop links DR-433
- nondefault timeout values DR-444
- remove bad links DR-433
- retransmission limits DR-437
- telephone number negotiation DR-441
- transmit queue threshold DR-439
- callback
- enabling on non-DTR dialer interface DR-451
- secure DR-127
- client call back DR-452
- domain name calls
- tunneled DR-197
- encapsulations
- dynamic detection DR-32
- IPX packet compression over DR-236
- Multilink PPP
- enabling for BACP DR-455
- sessions
- automatic startup DR-35
- ppp bap callback command DR-431
- ppp bap call command DR-429
- ppp bap drop command DR-433
- ppp bap link types command DR-435
- ppp bap max command DR-437
- ppp bap monitor load command DR-439
- ppp bap number command DR-440
- ppp bap timeout command DR-444
- ppp bridge appletalk command DR-446
- ppp bridge ip command DR-448
- ppp bridge ipx command DR-449
- ppp callback (DDR) command DR-451
- ppp callback (PPP client) command DR-452
- ppp chap hostname command DR-453
- ppp chap password command DR-453
- ppp command DR-428
- ppp ipcp command DR-453
- ppp max-bad-auth command DR-454
- ppp multilink command DR-455
- ppp multilink fragment-delay command DR-457
- ppp multilink idle-link command DR-458
- ppp multilink interleave command DR-459
- ppp pap sent-username command DR-460
- ppp quality command DR-460
- ppp reliable-link command DR-461
- ppp use-tacacs translate option
- mapping to virtual interface template command DR-810, DR-831
- pri-group timeslots nfas_d command DR-463
- privileged EXEC mode
- summary xiv
- profiles
- customer
- contents display DR-705
- information display DR-704
- prompts
- system xiv
- protocol (VPDN) command DR-465
- protocol rlm port command DR-467
- protocols
- terminal transport DR-783
- protocol stack
- SPX
- status DR-596
- protocol translation
- global options DR-815, DR-824, DR-830
- LAT DR-809
- TCP DR-819
- X.25 DR-830
- global translation options DR-806, DR-815, DR-824
- LAT options DR-813, DR-823
- outgoing options
- mapping to virtual interface template commands DR-810, DR-831
- SLIP and PPP options DR-805, DR-814, DR-823
- Telnet/TCP options DR-812, DR-818, DR-823
- X.25 options DR-804, DR-814
- proxy
- configuring for LAT DR-336
Q
- question command xv
- queues
- holding packets for modem connection DR-144
R
- range command DR-469
- Real-time Transport Protocol
- See RTP
- receive buffers
- LAT host DR-322
- LAT server DR-329
- regular expressions
- alternative DR-925
- characters in DR-923
- $ character DR-923, DR-926
- * character DR-923, DR-925
- + character DR-923, DR-925
- ? character DR-923, DR-925
- ^ character DR-923, DR-926
- _ character DR-923, DR-926
- creating DR-922
- using parentheses for recall DR-927
- with anchoring DR-926
- description DR-921
- examples DR-927
- multipliers DR-924
- recalling DR-927
- special characters
- anchoring (table) DR-926
- multipliers (table) DR-925
- request dialout command DR-471
- resource command DR-473
- resource groups
- monitoring DR-708
- resource-pool aaa accounting ppp command DR-476
- resource-pool aaa protocol command DR-478
- resource-pool call treatment command DR-479
- resource-pool command DR-475
- resource-pool group resource command DR-480
- resource-pool profile customer command DR-482
- resource-pool profile discriminator command DR-484
- resource-pool profile service command DR-485
- resource-pool profile vpdn command DR-486
- resume (setting X.3 parameters) command DR-487
- resume (switching sessions) command DR-491
- resume command DR-916
- retransmission limit
- LAT DR-328
- retry keepalive command DR-493
- RFC 1144
- TCP/IP header compression DR-757
- RLM
- group
- latency display DR-713
- status DR-715
- timer values DR-717
- rlogin
- login string DR-359
- server connections DR-494, DR-497
- username authentication DR-496
- rlogin command DR-494
- rlogin trusted-localuser-source command DR-496
- rlogin trusted-remoteuser-source local command DR-497
- rollover delay
- configuring dial out DR-255
- ROM monitor mode
- summary xiv
- rotary command DR-499
- rotary-group command DR-501
- rotary groups
- DDR dialer hold queues DR-144
- services and port numbers (table) DR-500
- routes
- displaying static DR-591
- static
- configuring DR-232
- routing
- asynchronous interfaces
- configuring manually DR-26
- dynamic asynchronous connection
- configuring manually DR-26
- routing translate option
- mapping to virtual interface template command DR-810, DR-831
- routing updates
- passing
- configuring DR-24
- RTP
- Multilink PPP interleaving DR-234
- RTP packets
- interleaving DR-459
- rxspeed command DR-501
S
- saving configuration changes xviii
- script activation command DR-504
- script arap-callback command DR-506
- script callback command DR-508
- script connection command DR-510
- script dialer command DR-512, DR-922
- script reset command DR-514
- script startup command DR-516
- Serial Line Internet Protocol
- See SLIP
- server (RLM) command DR-518
- server connections
- LAT DR-315 to DR-316
- PPP DR-428
- rlogin DR-494 to DR-496, DR-773
- SLIP DR-757 to DR-758
- Telnet DR-770 to DR-773
- TN3270 DR-789
- XRemote DR-888, DR-892, DR-896
- service advertisement timer
- configuring DR-338
- service announcements
- reenabling LAT DR-330
- service exec-callback command DR-519
- service old-slip-prompts command DR-520
- service pt-vty-logging command DR-521
- session-limit command DR-523
- session-timeout command DR-524
- setenv command DR-889, DR-891
- sgbp dial-bids command DR-525
- sgbp group command DR-526
- sgbp member command DR-527
- sgbp ppp-forward command DR-528
- sgbp seed-bid command DR-529
- show arap command DR-531
- show async status command DR-533
- show call progress tone command DR-535
- show controllers bri command DR-538
- show controllers e1 call-counters command DR-548
- show controllers e1 cas-data command DR-550
- show controllers e1 command DR-545
- show controllers t1 call-counters command DR-552
- show controllers t1 cas-data command DR-554
- show cot dsp command DR-556
- show cot request command DR-558
- show cot summary command DR-560
- show dhcp command DR-562
- show dialer command DR-564, DR-566, DR-567, DR-570, DR-572
- show dialer dnis command DR-568
- show dialer interface bri command DR-564, DR-571
- show dialer map command DR-573
- show dialer sessions command DR-575
- show entry command DR-576
- show interfaces bri command DR-577
- show interfaces command DR-216
- show interfaces serial bchannel command DR-582
- show interfaces virtual-access command DR-583
- show ip interface virtual-access command DR-588
- show ip local-pool command DR-589
- show ip route command DR-591
- show ipx compression command DR-593
- show ipx nasi connections command DR-594
- show ipx spx-protocol command DR-596
- show isdn command DR-598
- show isdn nfas group command DR-604
- show isdn service command DR-606
- show isdn status command DR-273
- show keymap command DR-608
- show lat advertised command DR-609
- show lat groups command DR-610
- show lat nodes command DR-611
- show lat services command DR-613
- show lat sessions command DR-614
- show lat traffic command DR-618
- show line command DR-620
- show modem at-mode command DR-631
- show modem call-stats command DR-632
- show modemcap command DR-688
- show modem command DR-623
- show modem configuration command DR-637
- show modem connect-speeds command DR-641
- show modem cookie command DR-645
- show modem csm command DR-646
- show modem log command DR-648
- show modem mapping command DR-657
- show modem mica command DR-661
- show modem operational-status command DR-665
- show modem-pool command DR-678
- show modem summary command DR-680
- show modem test command DR-681
- show modem version command DR-682
- show nbf cache command DR-691
- show nbf sessions command DR-693
- show node command DR-695
- show ppp bap command DR-698
- show ppp multilink command DR-529, DR-700
- show queuing virtual-access command DR-702
- show resource-pool call command DR-704
- show resource-pool customer command DR-705
- show resource-pool discriminator command DR-707
- show resource-pool resource command DR-708
- show resource-pool vpdn command DR-710
- show rlm group statistics command DR-713
- show rlm group status command DR-715
- show rlm group timer command DR-717
- show service command DR-719
- show sessions command DR-721
- show sgbp command DR-723
- show sgbp queries command DR-530, DR-724
- show snapshot command DR-725
- show spe version command DR-727
- show terminal command DR-731
- show tn3270 ascii-hexval command DR-735
- show tn3270 character-map command DR-736
- show translate command DR-737
- show ttycap command DR-739
- show users command DR-740
- show vpdn command DR-742
- show vpdn domain command DR-744
- show vpdn group command DR-745
- show vpdn history failure command DR-748
- show vpdn multilink command DR-750
- show x25 pad command DR-752
- show xremote command DR-754
- show xremote line command DR-756
- signals
- Break DR-915, DR-916
- generating DR-774
- X.3 action upon receipt of DR-915
- CTS
- timeout DR-368
- DSR
- modem control DR-398
- DTR
- low DR-391
- off-hook status DR-381
- SLIP
- server connections DR-757 to DR-758
- sessions
- automatic startup DR-35
- slip command DR-757
- snapshot client command DR-759
- snapshot routing DR-761
- dialer map
- configuring for DDR DR-168
- quiet period DR-103
- snapshot server command DR-761
- software flow control
- configuring for a line DR-207
- source-ip command DR-763
- SPE
- configuration mode DR-764
- version display DR-727
- spe command DR-764
- speed command DR-762
- spoofing
- DDR DR-567
- stack group
- bidding
- default across stack members DR-529
- displaying current seed values DR-724
- offload server DR-529
- overriding offload or default DR-530
- configuration (example) DR-527
- create and name DR-526
- first call receiver
- host master bundle interface DR-529
- member
- configuring DR-526
- host name DR-527
- IP address DR-527
- start character
- configuring for a line DR-766
- default DR-207
- start-character command DR-766
- start-chat command DR-767
- static route
- configuring DR-5
- stop character
- configuring for a line DR-769
- default DR-207
- stop-character command DR-769
- subinterface configuration mode
- summary xiv
T
- Tab key
- command completion xv
- TCP
- connections
- asychronous mobility DR-235
- protocol translation DR-805, DR-812, DR-814, DR-818, DR-823
- TCP/IP
- rlogin connections DR-494, DR-496, DR-497
- Telnet connections DR-770
- telephone numbers
- modem pool assignments DR-50
- Telnet
- Break signal DR-774
- connections DR-770 to DR-773
- configuring a line DR-777
- description DR-772
- login string DR-359
- notification of pending output DR-491
- protocol translation DR-805, DR-812, DR-814, DR-818, DR-823
- Remote Echo option DR-776
- special commands (table) DR-772
- Suppress Go Ahead option DR-776
- telnet break-on-ip command DR-774
- telnet command DR-770
- telnet refuse-negotiations command DR-776
- telnet speed command DR-777
- telnet sync-on-break command DR-778
- telnet transparent command DR-779
- terminal dispatch-character command DR-914
- terminal lat command DR-782
- terminals
- baud rates
- receive, configuring for a line DR-501
- transmit, configuring for a line DR-843
- lock access DR-353
- session limits
- setting DR-523
- session timeout interval
- setting DR-524
- transport protocol DR-783
- terminal transport preferred command DR-783
- terminate-from command DR-785
- test modem back-to-back command DR-786
- time limits
- sessions
- configuring DR-20
- timeouts
- absolute DR-6
- DDR interface
- configuring DR-139
- session
- setting DR-524
- timers
- service advertisement
- configuring DR-338
- timeslots
- T1
- configuring DR-66
- TN3270
- character mapping
- configuring DR-792
- monitoring DR-735, DR-736
- data character bits
- setting DR-790, DR-791
- default keymaps DR-293
- description DR-789
- international characters DR-792
- monitoring DR-735
- null processing handling DR-798
- require reset after user error DR-800
- server connections DR-789
- special characters DR-292
- tn3270 8bit display command DR-790
- tn3270 8bit transparent-mode command DR-791
- tn3270 character-map command DR-792
- tn3270 command DR-789
- tn3270 datastream command DR-797
- tn3270 null-processing command DR-798
- tn3270 optimize-cursor-move command DR-799
- tn3270 reset-required command DR-800
- tn3270 status-message command DR-801
- tn3270 typeahead command DR-802
- translate lat (virtual access interfaces) command DR-809
- translate lat command DR-803
- translate tcp (virtual access interfaces) command DR-818
- translate tcp command DR-812
- translate x25 command DR-821
- translation options
- LAT DR-803, DR-809, DR-813, DR-822
- outgoing options
- mapping to virtual interface template commands DR-810, DR-831
- prevent service advertisements DR-803, DR-809
- swap outgoing X.25 connections DR-825, DR-830
- TCP
- binary mode DR-818
- incoming address DR-818
- TCP/IP
- PPP DR-804, DR-813, DR-822
- SLIP DR-803, DR-813, DR-822
- Telnet DR-803, DR-812, DR-822
- Telnet binary mode DR-812
- X.25 DR-803, DR-813, DR-821, DR-829
- transport input command DR-832
- transport output command DR-834
- transport preferred command DR-836
- troubleshooting
- modem access DR-902
- ttycap command DR-838
- ttycap support DR-839
- tunnel command DR-842
- tunnels
- VPDN
- sessions, stopping DR-105
- txspeed command DR-843
U
- user EXEC mode
- summary xiv
- username
- CPP authentication DR-117
- user profiles
- obtain name of remote DR-137
V
- V.120
- answer all incoming calls
- configuring DR-241
- encapsulations
- dynamic detection DR-32
- V.25bis
- options DR-184, DR-187
- (table) DR-184
- verifying DR-247
- virtual access interfaces
- VTY line status DR-583
- virtual asynchronous lines
- configuring authentication DR-805, DR-815, DR-824
- virtual interface template
- translate lat command DR-809
- translate tcp command, using with DR-818
- translate x25 command, using with DR-830
- Virtual Private Dialup Networking
- See VPDN
- virtual-profile aaa command DR-844
- virtual-profile if-needed command DR-845
- virtual-profile virtual-template command DR-847
- virtual-template command DR-848
- virtual template interface
- as serial interface DR-223
- purpose DR-223
- virtual templates
- configuration (example) DR-413
- multilink bundle interface
- configuring DR-413
- virtual terminal lines
- configuring DR-346
- See also VTY lines
- VPDN
- authorized sessions display DR-750
- connections
- incoming DR-855
- outgoing DR-859
- enabling DR-851
- group
- contents display DR-710
- relationships display DR-745
- history failure table
- clearing DR-104
- event logging DR-858
- size DR-854
- statistics DR-748
- home gateway
- CHAP challenge DR-852
- information display DR-742
- logging
- events DR-857
- status of domains and group DR-744
- tunnel
- authorization search order DR-862
- local name
- configuring DR-855
- tunnel authentication
- remote host name and IP address DR-859
- virtual templates DR-855
- vpdn domain-delimiter command DR-849
- vpdn enable command DR-851
- vpdn force-local-chap command DR-852
- vpdn history failure table-size command DR-854
- vpdn incoming command DR-855
- vpdn local-authentication command DR-856
- vpdn logging command DR-857
- vpdn logging history failure command DR-858
- vpdn outcoming command DR-859
- vpdn search-order command DR-862
- vpdn source-ip command DR-863
- vty-async command DR-864
- vty-async dynamic-routing command DR-866
- vty-async header-compression command DR-867
- vty-async ipx ppp-client loopback command DR-868
- vty-async keepalive command DR-869
- vty-async mtu command DR-871
- vty-async ppp authentication command DR-872
- vty-async ppp use-tacacs command DR-873
- vty-async virtual-template command DR-874
- VTY lines
- assigned to loopback interfaces DR-815, DR-824
- loopback interfaces DR-806
- See also lines, virtual terminal
W
- where command DR-876
X
- X.25
- Interrupt packet DR-916
- ISDN over D channel DR-288
- pad connections display DR-752
- protocol translation options DR-804, DR-814
- static TEI
- configuring DR-290
- switching feature (example) DR-928
- TEI restrictions DR-290
- traffic over ISDN D channel
- (example) DR-217
- translation options DR-829
- X.29
- Indication of Break packet DR-916
- SET PARAMETER packet DR-487, DR-886
- X.3
- parameter settings display DR-752
- X.3 PAD
- connections DR-886
- description DR-886
- X.3 PAD parameters
- action upon receipt of Break signal (7) DR-915
- baud rate (11) DR-916
- change dynamically DR-487
- character delete (16) DR-918
- data forward character (3) DR-914
- default values DR-487, DR-886
- description DR-490, DR-913
- device control (5) DR-915
- discard output (8) DR-916
- echo mask (20) DR-919
- editing (15) DR-918
- edit PAD service signals (19) DR-919
- escape from data transfer (1) DR-914
- idle timer (4) DR-915
- input flow control (12) DR-917
- line delete (17) DR-918
- line display (18) DR-919
- Line Feed insertion (13) DR-917
- Line Feed padding (14) DR-918
- line folding (10) DR-916
- local echo mode (2) DR-914
- local editing (15) DR-918
- PAD service signals (6) DR-915
- page wait (22) DR-919
- parity treatment (21) DR-919
- return padding (9) DR-916
- setting DR-886
- X.28
- mode DR-881
- x25 aodi command DR-877
- x25 map ppp command DR-878
- x25 route command DR-922, DR-928
- x25 subaddress command DR-880
- x28 command DR-881
- x3 command DR-886
- X Display Manager Control Protocol
- See XDMCP
- XDMCP
- starting XRemote DR-896
- XRemote
- automatic session startup DR-892
- buffer size
- configuring DR-893
- connections
- monitoring DR-756
- description DR-888, DR-892, DR-896
- EXEC prompt DR-888
- font server identification DR-894
- host computer connections DR-888
- manual session startup DR-888
- reenabling manually DR-888
- server connections DR-888
- server sessions DR-890
- starting clients DR-888
- terminal line statistics DR-756
- terminate session DR-888
- X display location
- configuring DR-888
- xremote command DR-888
- xremote lat command DR-892
- XRemote terminal
- configuring DR-889
- xremote tftp buffersize command DR-893
- xremote tftp host command DR-894
- xremote tftp retries command DR-895
- xremote xdm command DR-896
- X Window System
- display location
- configuring DR-888
Copyright 1989-1999
©
Cisco Systems Inc.