Index: Cisco IOS AppleTalk and Novell IPX Configuration Guide, Release 12.1
Symbols A B C D E F G H I K L M N O P Q R S T U V W X Z
Symbols
- ? command xvii, xxi
A
- AARP P2C-2
- abbreviating commands
- context-sensitive help xvi, xvii, xxi
- access control
- AppleTalk P2C-16 to P2C-25
- IPX P2C-116 to P2C-118, P2C-126
- access-list additional-zones command P2C-18 to P2C-20
- access-list cable-range command P2C-20, P2C-21
- access-list command
- IPX
- extended P2C-112, P2C-119
- SAP P2C-119
- standard P2C-112, P2C-119
- NLSP route aggregation filtering P2C-102 to P2C-108
- access-list includes command P2C-21
- access-list network command P2C-20
- access-list other-access command P2C-21
- access-list other-nbps command P2C-19
- access lists
- AppleTalk
- cable ranges P2C-20
- configuration (examples) P2C-58 to P2C-67
- displaying P2C-53
- guidelines P2C-18
- network numbers P2C-17
- zones P2C-16, P2C-20
- IPX
- configuration (examples) P2C-165 to P2C-174
- extended P2C-116
- extended, creating P2C-119
- implicit deny P2C-122
- implicit masks P2C-122
- input P2C-117
- named P2C-119
- NetBIOS
- creating P2C-126
- description P2C-116
- NetBIOS, creating P2C-121
- NLSP route aggregation P2C-116
- routing table, filtering P2C-124
- SAP
- creating P2C-119
- standard P2C-116
- standard, creating P2C-119
- time-based P2C-122
- types P2C-116
- violations, logging P2C-119, P2C-120
- access-list within command P2C-21
- access-list zone command P2C-20
- accounting
- IPX
- configuring P2C-143
- database threshold P2C-144
- enabling P2C-144
- filters P2C-144
- maximum transit entries P2C-144
- addresses
- AppleTalk P2C-9
- (example) P2C-10
- network numbers P2C-9
- IPX P2C-77
- (example) P2C-77
- network numbers P2C-77
- node numbers P2C-77
- AEP P2C-2
- AppleTalk
- access control P2C-16 to P2C-25
- access lists
- cable ranges P2C-20
- configuration (examples) P2C-58 to P2C-67
- displaying P2C-53
- guidelines P2C-18
- network numbers P2C-17
- zones P2C-16, P2C-20
- addresses
- (example) P2C-10
- definition P2C-9
- network numbers P2C-9
- remapping P2C-50
- adjacent networks P2C-53
- adjacent routers P2C-53
- AEP P2C-2
- ARP P2C-2
- ARP table
- See ARP table, AppleTalk
- ATCP P2C-37
- ATP P2C-2
- AURP P2C-14, P2C-26
- configuring P2C-26
- enabling P2C-26
- last-heard-from timer P2C-27
- private path database, displaying P2C-53
- routing update interval P2C-27
- tunneling P2C-26
- update-events queue, displaying P2C-53
- cable ranges
- definition P2C-9
- interfaces, assigning P2C-12
- remapping P2C-50
- CAP P2C-32
- checksums
- generation and verification, disabling P2C-41
- Cisco's implementation P2C-3
- concurrent routing and bridging (CRB) P2C-15
- configuration P2C-10
- configuration (examples) P2C-55 to P2C-72
- CRB P2C-15
- DDP P2C-2
- DDR P2C-51
- definition P2C-1
- discovery mode
- (example) P2C-56
- interfaces
- dynamic P2C-12
- extended P2C-14
- nonextended P2C-14
- nonextended interface P2C-56
- domains P2C-47
- domain router configuration P2C-48
- domain router configuration (figure) P2C-49
- encapsulation P2C-3, P2C-8, P2C-29, P2C-33
- Enhanced IGRP P2C-14
- active state time limit, adjusting P2C-47
- bandwidth P2C-47
- (example) P2C-73
- Cisco's implementation P2C-3, P2C-44
- configuration (examples) P2C-57
- disabling P2C-45
- enabling P2C-14, P2C-26, P2C-45
- features P2C-43
- hello packets P2C-46
- hold time P2C-46
- interfaces, displaying P2C-53
- log neighbor adjacencies P2C-47
- neighbors, displaying P2C-53
- route redistribution P2C-45
- routing protocol, enabling P2C-45
- split horizon P2C-46
- topology table P2C-53
- enhancements P2C-3
- Ethernet card
- using P2C-10
- EtherTalk P2C-1, P2C-10
- extended interfaces
- cable range
- assigning P2C-12
- configuring (example) P2C-55
- proxy network numbers P2C-40
- routing P2C-12, P2C-14, P2C-15
- routing (example) P2C-55
- zones
- names P2C-12
- extended network
- definition P2C-7
- fast switching
- cache entries P2C-53
- interfaces P2C-42
- FDDITalk P2C-1
- pre-FDDITalk packets P2C-52
- filters
- data packet P2C-21
- (example) P2C-58
- zones P2C-22
- GZL P2C-24
- partial zones P2C-25
- (example) P2C-62
- routing P2C-22
- routing table P2C-23
- routing table (example) P2C-59
- routing update filters P2C-23
- free-trade zone
- (example) P2C-63
- establishing P2C-27
- gleaning P2C-4, P2C-41
- GZL
- filters P2C-24
- replies P2C-23
- integrated routing and bridging
- See AppleTalk, IRB
- Inter·Poll P2C-54
- interenterprise routing P2C-47
- addresses
- remapping P2C-50
- AURP
- (example) P2C-68
- cable ranges
- remapping P2C-50
- configuring (example) P2C-74
- domain information P2C-53
- domain names P2C-49
- domain numbers P2C-49
- domains P2C-47, P2C-49
- hop count P2C-50
- interfaces P2C-50
- remapping P2C-53
- split horizon P2C-48
- interfaces P2C-12
- interface status P2C-53
- Internet Router software P2C-10
- internetwork parameters P2C-53
- IPTalk
- /etc/services file P2C-35
- AppleTalk-to-IP address mapping P2C-34
- configuration (example) P2C-70 to P2C-72
- definition P2C-32
- IP encapsulation P2C-36
- node identifier P2C-71
- SLIP drivers P2C-32
- tunneling P2C-33
- UDP port numbers P2C-34, P2C-35
- IRB P2C-16
- K-Star
- Shiva FastPath routers P2C-10
- LANE P2C-3
- load sharing
- round-robin P2C-40
- LocalTalk P2C-1
- logical cable P2C-9
- MacIP
- (examples) P2C-69
- addresses P2C-31, P2C-32
- address ranges P2C-30
- advantages P2C-30
- clients P2C-53
- configuration requirements P2C-30
- definition P2C-29
- disadvantages P2C-30
- implementation P2C-29
- servers P2C-31, P2C-53
- traffic P2C-53
- maximum paths
- setting P2C-40
- MIB P2C-2
- monitoring tasks P2C-52
- name binding
- See AppleTalk, NBP
- NBP P2C-2, P2C-25
- name registration
- task table P2C-53
- services P2C-53
- neighbor table, deleting entries P2C-52
- network, definition P2C-9
- network connectivity, testing P2C-53
- network events, logging P2C-42
- nondiscovery-mode interface P2C-13
- nonextended interface
- assigning an address P2C-12
- enabling routing P2C-12
- routing (example) P2C-56
- zone name, assigning P2C-12
- nonextended interfaces
- proxy network numbers P2C-40
- routing P2C-15
- nonextended network
- definition P2C-7
- packets P2C-33
- performance tuning P2C-37
- Phase 1
- comparison with Phase 2 P2C-8
- compatibility with Phase 2 P2C-10
- definition P2C-7
- Phase 2
- comparison with Phase 1 P2C-8
- compatibility with Phase 1 P2C-10
- definition P2C-7
- pre-FDDITalk packets
- enabling P2C-52
- proxy network numbers
- (example) P2C-73
- interoperability P2C-40
- responder support P2C-3, P2C-54
- round-robin load sharing, enabling P2C-40
- routing
- (example) P2C-55
- extended interfaces, enabling dynamically P2C-14
- extended interfaces, enabling manually P2C-12
- routing, enabling
- on nonextended interface dynamically P2C-13
- on nonextended interface manually P2C-11, P2C-12
- routing process P2C-14
- routing protocols
- specifying P2C-26
- routing table P2C-53
- entries P2C-52
- update timers P2C-39
- routing tables
- update filters P2C-22
- routing uopdates
- interval timer P2C-39
- routing updates P2C-39
- advertising routes with no zones P2C-39
- strict checking P2C-38
- stub mode P2C-38
- timers P2C-39
- RTMP P2C-2, P2C-14
- advertising routes with no zones P2C-39
- enabling P2C-26
- routing updates P2C-39
- strict checking P2C-38
- stub mode P2C-38
- seed router P2C-13
- Shiva FastPath routers P2C-10
- SMRP
- fast switching P2C-36
- fast switching cache table P2C-53
- forwarding table P2C-53
- global information P2C-53
- group table
- P2C-53
- neighbor table P2C-53
- port table P2C-54
- routing table P2C-54
- SNMP
- configuring P2C-28
- configuring (example) P2C-69
- sockets, displaying P2C-53
- static routes
- defining P2C-51
- displaying P2C-53
- test mode, entering P2C-54
- TokenTalk P2C-1
- traffic P2C-53
- traffic statistics
- resetting P2C-52
- transition mode P2C-15
- (example) P2C-57
- tunneling
- AURP P2C-26
- cayman P2C-29
- GRE P2C-29
- methods P2C-28
- Update Routing Protocol
- See AppleTalk, AURP
- VLANs P2C-3
- WAN protocols supported P2C-3
- ZIP
- ZIP query interval P2C-42
- ZIP reply filters
- configuration (example) P2C-68
- overview P2C-24
- zones P2C-10, P2C-12
- information table P2C-53
- name format P2C-10
- special characters P2C-10
- appletalk access-group command P2C-21
- AppleTalk Access List Enhancements
- filters P2C-21
- overview P2C-19
- types P2C-20
- appletalk address command P2C-12
- AppleTalk Address Resolution Protocol
- See AppleTalk, ARP
- See ARP table, AppleTalk
- appletalk arp interval command P2C-41
- appletalk arp retransmit-count command P2C-41
- appletalk arp timeout command P2C-41
- appletalk aurp-tickle-time command P2C-27
- appletalk aurp update-interval command P2C-27
- appletalk cable-range command P2C-12, P2C-14, P2C-15, P2C-28
- appletalk checksum command P2C-41
- appletalk client-mode command P2C-37
- AppleTalk Control Protocol
- See AppleTalk, ATCP P2C-37
- AppleTalk Datagram Delivery Protocol
- See (DDP)
- appletalk discovery command P2C-14
- appletalk distribute-list in command P2C-23
- appletalk distribute-list out command P2C-23
- appletalk domain hop-reduction command P2C-50
- appletalk domain name command P2C-49
- appletalk domain remap-range command P2C-50
- AppleTalk Echo Protocol P2C-2
- appletalk eigrp active-time command P2C-47
- appletalk eigrp-bandwidth-percentage command P2C-47
- appletalk eigrp log-neighbor-changes command P2C-47
- appletalk eigrp split-horizon command P2C-46
- appletalk eigrp timers command P2C-46
- appletalk event-logging command P2C-28, P2C-42
- appletalk free-trade-zone command P2C-27
- appletalk getzonelist-filter command P2C-24
- appletalk glean-packets command P2C-41
- appletalk iptalk-baseport command P2C-35
- appletalk lookup-type command P2C-25
- appletalk macip dynamic command P2C-31
- appletalk macip server command P2C-31
- appletalk macip static command P2C-32
- appletalk maximum-paths command P2C-40
- appletalk name-lookup-interval command P2C-25
- appletalk permit-partial-zones command P2C-25
- appletalk pre-fdditalk command P2C-52
- appletalk protocol command P2C-14, P2C-26, P2C-45
- appletalk proxy-nbp command P2C-40
- appletalk require-route-zones command P2C-39
- appletalk route-cache command P2C-42
- appletalk route-redistribution command P2C-26, P2C-45
- appletalk routing command P2C-11, P2C-28, P2C-45
- appletalk rtmp jitter command P2C-40
- appletalk rtmp-stub command P2C-38
- appletalk send-rtmp command P2C-39
- appletalk static cable command P2C-51
- appletalk static net command P2C-51
- appletalk strict-rtmp-checking command P2C-38
- appletalk timers command P2C-39
- AppleTalk Transaction Protocol P2C-2
- AppleTalk Update Routing Protocol
- See AppleTalk, AURP
- appletalk virtual-net command P2C-37
- appletalk zip-query-interval command P2C-42
- appletalk zip-reply-filter command P2C-24
- appletalk zone command P2C-12, P2C-15, P2C-28
- area-address command P2C-91, P2C-102, P2C-108
- ARP
- AppleTalk P2C-2, P2C-41
- ARP cache
- See ARP table
- ARP table
- AppleTalk
- entries P2C-52
- gleaning P2C-41
- update interval P2C-41
- ATCP
- async interfaces P2C-37
- ATM
- fast switching IPX P2C-114
- ATP P2C-2
- AURP
- See AppleTalk AURP P2C-26
B
- backup server table
- IPX
- Enhanced IGRP P2C-89
- bandwidth
- AppleTalk Enhanced IGRP P2C-47
- bridge crb command P2C-15, P2C-82
- broadcasts
- IPX
- forwarding P2C-126, P2C-130, P2C-139
- type 20 packets P2C-128, P2C-129
C
- cable ranges
- See AppleTalk, cable ranges
- CAP P2C-32
- cautions
- usage in text xvi
- CCO
- accessing xvii
- definition xvii
- checksums
- AppleTalk P2C-41
- Cisco Connection Online
- See CCO
- Cisco IOS
- saving configuration changes xxiii
- clear appletalk arp command P2C-52
- clear appletalk neighbor command P2C-52
- clear appletalk route command P2C-52
- clear appletalk traffic command P2C-52
- clear ip nhrp command P2C-148
- clear ipx accounting command P2C-148
- clear ipx cache command P2C-145
- clear ipx nlsp neighbors command P2C-147
- clear ipx route command P2C-145
- clear ipx traffic command P2C-145
- clear smrp mcache command P2C-53
- clock ticks
- IPX P2C-132
- Columbia AppleTalk Package
- See CAP
- command modes
- summary (table) xx
- complete sequence number PDU
- See CSNP
- concurrent routing and bridging
- See CRB
- concurrent routing and bridging (CRB) P2C-15
- configuration, saving xxiii
- CRB P2C-15
- IPX, enabling P2C-82
- CSNP
- See also NLSP, CSNP
D
- Datagram Delivery Protocol
- See AppleTalk, DDP
- See DDP
- DDP P2C-2
- DDR
- AppleTalk P2C-51
- (example) P2C-74
- IPX P2C-114, P2C-115
- spoofing P2C-115
- spoofing watchdog packets P2C-114
- SPX
- spoofing P2C-115
- watchdog packets P2C-115
- default form of a command
- using xxiii
- default routes
- specifying P2C-142
- understanding P2C-78
- discovery mode
- interfaces
- dynamic P2C-12
- extended P2C-14
- nonextended P2C-14
- distribute-list in command P2C-87, P2C-88
- distribute-list out command P2C-87
- distribute-sap-list out command P2C-88
- domains
- See AppleTalk, interenterprise routing
E
- eigrp log-neighbor-adjacency-changes command P2C-147
- encapsulation
- AppleTalk P2C-3, P2C-8, P2C-29, P2C-33
- IPX P2C-4, P2C-79 to P2C-92
- encapsulation ppp command P2C-37
- Enhanced IGRP
- AppleTalk, configuring P2C-42
- IPX, configuring P2C-82
- NLSP route redistribution P2C-86, P2C-110
- (example) P2C-156
- /etc/services file P2C-35
- EtherTalk P2C-1, P2C-10
- extended access lists
- IPX
- See access lists, IPX
- extended networks
- AppleTalk P2C-7
F
- FastPath router
- AppleTalk P2C-33
- K-Star P2C-10
- fast switching P2C-42
- AppleTalk P2C-42
- cache entries P2C-53
- description P2C-140
- IPX
- cache entries, deleting P2C-145
- cache entries, displaying P2C-145
- directed broadcast packets P2C-140
- disabling P2C-140
- over ATM P2C-114
- over Frame Relay P2C-114
- over SMDS P2C-114
- FDDI
- IPX encapsulation P2C-79
- FDDITalk P2C-1, P2C-52
- filters
- AppleTalk
- data packet
- (example) P2C-58
- zones P2C-22
- GZL P2C-24
- partial zones P2C-25
- (example) P2C-62
- routing P2C-22
- routing table P2C-23
- routing table (example) P2C-59
- routing update filters P2C-23
- IPX
- broadcast P2C-126
- generic P2C-123
- GNS P2C-124
- NetBIOS P2C-125, P2C-126
- overview P2C-116
- routing table P2C-123, P2C-124
- SAP P2C-124
- IPX Enhanced IGRP
- routes P2C-87
- route updates P2C-87
- SAP updates P2C-88
- SAP P2C-110
- floating static routes
- IPX P2C-132
- flooded broadcasts
- IPX P2C-139
- Frame Relay
- fast switching
- IPX P2C-114
- free-trade zone
- AppleTalk
- example P2C-63
- free-trade zone, AppleTalk
- establishing P2C-27
G
- Get General Service
- See GGS
- Get Nearest Server
- See GNS
- GetZoneList
- See GZL
- GGS
- filters P2C-125
- global configuration mode
- summary xx
- GNS
- filters P2C-125
- request response delay P2C-137
- requests P2C-137
- GZL
- replies P2C-23
H
- header compression
- IPX P2C-115
- hello packets
- AppleTalk
- Enhanced IGRP P2C-46
- IPX Enhanced IGRP, intervals P2C-85
- IPX Enhanced IGRP, timers P2C-85
- help command xvi, xvii, xxi
- helper addresses
- IPX P2C-126
- (example) P2C-172
- hold time
- AppleTalk
- Enhanced IGRP P2C-46
- IPX
- Enhanced IGRP P2C-85
I
- IDP
- characteristics P2C-4
- IGRP
- Cisco's implementation P2C-44
- Integrated Routing and Bridging
- See IRB
- interface command P2C-26, P2C-34
- interface configuration mode
- summary xx
- interface tunnel command P2C-26, P2C-29
- IP encapsulation of AppleTalk P2C-34
- Internet Datagram Protocol
- See IDP
- Internet Router software
- requirments P2C-10
- IP
- AppleTalk-to-IP address mapping P2C-34
- ip address command P2C-34
- IPTalk
- /etc/services file P2C-35
- AppleTalk-to-IP address mapping P2C-34
- configuration (example) P2C-70 to P2C-72
- description P2C-32
- IP encapsulation P2C-36
- SLIP drivers P2C-32
- UDP port numbers P2C-34, P2C-35
- IPX
- access control, configuring P2C-126
- access control violation logging (examples) P2C-167
- access lists
- configuration (examples) P2C-165 to P2C-174
- extended P2C-116
- extended, applying time ranges P2C-122
- extended, creating P2C-119
- filtering, SAP P2C-121
- implicit deny P2C-122
- implicit masks P2C-122
- named P2C-119
- named, extended P2C-120
- named, NLSP route aggregation P2C-121
- named, SAP P2C-121
- named, standard P2C-120
- NetBIOS P2C-116
- description P2C-116
- NetBIOS, creating P2C-121
- NLSP route aggregation P2C-116
- routing table filtering P2C-123
- SAP
- creating P2C-119
- standard P2C-116
- standard, creating P2C-119
- types P2C-116
- violations, logging P2C-119, P2C-120
- accounting
- (example) P2C-176
- configuring P2C-143
- database entries, deleting P2C-148
- database entries, displaying P2C-148
- database threshold P2C-144
- enabling P2C-144
- filters P2C-144
- maximum transit entries P2C-144
- addresses P2C-77
- broadcasts P2C-92
- blocking P2C-138
- forwarding P2C-126, P2C-130, P2C-139
- type 20 packets P2C-128, P2C-129
- clock ticks P2C-132
- compliance with Novell's IPX P2C-127
- configuration (examples) P2C-149 to P2C-154
- configuration task list P2C-78
- DDR P2C-114, P2C-115
- default routes
- See NLSP, default routes
- default routes, specifying P2C-142
- default routes, understanding P2C-78
- disabling P2C-131, P2C-142, P2C-143
- encapsulation P2C-4, P2C-79 to P2C-92
- IEEE interfaces (table) P2C-79
- Enhanced IGRP P2C-84
- backup server table P2C-89
- Cisco's implementation P2C-5
- enabling (example) P2C-153
- features P2C-82
- filters P2C-87
- route updates P2C-87
- SAP updates P2C-88
- hello packets, intervals P2C-85
- hello packets, timers P2C-85
- hold time P2C-85
- queries P2C-89
- redistribution P2C-86
- routes P2C-87
- SAP
- updates (example) P2C-154
- SAP updates P2C-87
- split horizon P2C-86
- task list P2C-84
- timers, adjusting P2C-85
- Enhanced IGRP, enabling P2C-84
- fast switching
- cache entries, deleting P2C-145
- directed broadcast packets P2C-140
- disabling P2C-140
- over ATM P2C-114
- over Frame Relay P2C-114
- FDDI P2C-79
- filtering P2C-100
- filters
- broadcast P2C-126
- generic P2C-123
- GGS, applying to interface P2C-125
- GNS P2C-125
- NetBIOS P2C-126
- description P2C-125
- overview P2C-116
- routing table P2C-123, P2C-124
- SAP P2C-124
- flooded broadcasts P2C-139
- GGS
- filters P2C-125
- GNS
- control requests P2C-137
- filters P2C-125
- queue length
- SAP requests P2C-134
- request response delay P2C-137
- header compression P2C-115
- helper addresses P2C-126
- (example) P2C-172
- helper addresses, specifying P2C-126
- integrated routing and bridging
- See IPX, IRB
- interfaces, displaying status P2C-145
- IPXWAN P2C-116
- disabling P2C-116
- failed link P2C-116
- network numbers P2C-116
- PPP P2C-116
- static routing P2C-116
- IRB
- keepalives P2C-114, P2C-115
- LANE support P2C-5
- load sharing
- per-host P2C-138
- round-robin P2C-137
- maximum paths
- description P2C-137
- setting P2C-138
- messages
- filtering NetBIOS P2C-126
- MIB P2C-4
- MLS support P2C-5
- monitoring tasks P2C-145
- multicasts P2C-92
- Multilayer Switching
- See IPX, MLS support
- Named Access Lists
- task list P2C-119
- NetBIOS
- access control P2C-125
- filters P2C-125
- filters (example) P2C-171
- messages
- filtering P2C-126
- network access P2C-116 to P2C-118
- network connectivity, testing P2C-146
- network numbers
- definition P2C-77
- interfaces P2C-79
- node numbers P2C-77
- Novell IPX compliance P2C-127
- padding packets P2C-142
- performance tuning P2C-127
- per-host load sharing, enabling P2C-138
- ping type, selecting P2C-145
- PPP P2C-115
- restarting P2C-131, P2C-142, P2C-143
- RIP
- description P2C-132
- updates, delay between P2C-131
- updates, delays P2C-133
- updates, timers P2C-133
- round-robin load sharing, enabling P2C-137
- route aggregation, See NLSP
- route cache
- size P2C-140
- route cache invalidation P2C-141
- routing
- between emulated LANs P2C-5
- enabling P2C-79
- enabling, example P2C-149
- enabling on multiple networks P2C-81
- enabling on multiple networks (example) P2C-150
- enabling over WAN interface (example) P2C-162
- metrics P2C-4
- routing table entries
- deleting P2C-145
- displaying P2C-145
- routing table entries, adding P2C-124
- SAP P2C-4
- access lists
- creating P2C-119
- delay
- setting P2C-135
- delay between packets
- setting P2C-130, P2C-131
- filtering P2C-119
- filters P2C-124
- filters (example) P2C-167, P2C-168
- messages
- filtering P2C-124
- queue length
- setting P2C-134
- responses to GNS requests
- controlling P2C-137
- split horizon P2C-88
- static entries
- configuring P2C-134
- table
- static entries P2C-134
- updates P2C-87, P2C-88
- setting P2C-135
- secondary networks
- configuring (example) P2C-151
- shutting down (example) P2C-151
- servers, displaying P2C-145
- spoofing P2C-114, P2C-115
- static routes
- adding to routing table P2C-132
- description P2C-132
- floating P2C-132
- static routes, overriding P2C-132
- subinterfaces P2C-91
- configuring P2C-80, P2C-81
- configuring (example) P2C-150
- NLSP P2C-91
- shutting down (example) P2C-150
- tick count P2C-132
- traffic, displaying statistics P2C-145
- type 20 packets
- accepting P2C-129
- forwarding P2C-128, P2C-129
- VLANs support P2C-5
- watchdog packets P2C-114, P2C-115
- ipx access-group command P2C-117, P2C-123
- ipx access-list command P2C-103, P2C-120, P2C-121
- ipx accounting command P2C-144
- ipx accounting-list command P2C-144
- ipx accounting-threshold command P2C-144
- ipx accounting-transits command P2C-144
- ipx advertise-default-route-only command P2C-142
- ipx backup-server-query-interval command P2C-89
- ipx bandwidth-percent eigrp command P2C-84
- ipx broadcast-fastswitching command P2C-140
- ipx default-output-rip-delay command P2C-130, P2C-133
- ipx default-output-sap-delay command P2C-130, P2C-135
- ipx default-ping command P2C-145
- ipx default-route command P2C-142
- ipx default-triggered-rip-delay command P2C-130, P2C-133
- ipx default-triggered-sap-delay command P2C-130, P2C-135
- ipx delay command P2C-132
- IPX Display and Debug Enhancements P2C-114
- configuration
- GGS SAP response filter (example) P2C-170
- GGS SAP response filters P2C-125
- IPX traffic statistics P2C-145
- watchdog spoofing P2C-114
- watchdog spoofing (example) P2C-164
- ipx down command P2C-131, P2C-142
- IPX Enhanced IGRP
- bandwidth
- (examples) P2C-155
- interfaces, displaying P2C-146
- log neighbor adjacencies P2C-147
- monitoring P2C-146
- neighbors, displaying P2C-146
- routing table, displaying entries P2C-146
- topology table P2C-146
- traffic, displaying statistics P2C-146
- ipx gns-reply-disable command P2C-137
- ipx gns-response-delay command P2C-137
- ipx gns-round-robin command P2C-137
- ipx hello-interval command P2C-85
- ipx helper-address command P2C-126, P2C-130, P2C-139
- ipx helper-list command P2C-126
- ipx hold-time eigrp command P2C-85
- ipx input-network-filter command P2C-124
- ipx input-sap-filter command P2C-124
- ipx internal-network command P2C-91
- ipx ipxwan command P2C-116
- ipx ipxwan error command P2C-116
- ipx ipxwan static command P2C-116
- ipx link-delay command P2C-94
- ipx linkup-request command P2C-137
- ipx maximum-paths command P2C-138
- ipx netbios input-access-filter command P2C-126
- ipx netbios output-access-filter command P2C-126
- ipx network command P2C-80, P2C-81, P2C-91, P2C-116, P2C-143
- ipx nhrp authentication command P2C-112
- ipx nhrp holdtime command P2C-114
- ipx nhrp interest command P2C-112
- ipx nhrp map command P2C-111, P2C-148
- ipx nhrp max-send command P2C-113
- ipx nhrp network-id command P2C-111
- ipx nhrp nhs command P2C-111
- ipx nhrp record command P2C-113
- ipx nhrp responder command P2C-113
- ipx nhrp use command P2C-113
- ipx nlsp csnp-interval command P2C-95
- ipx nlsp enable command P2C-91, P2C-92, P2C-102 to P2C-109
- ipx nlsp hello-interval command P2C-95
- ipx nlsp lsp-interval command P2C-96
- ipx nlsp metric command P2C-94
- ipx nlsp multicast command P2C-93
- ipx nlsp priority command P2C-95
- ipx nlsp-retransmit-interval command P2C-96
- ipx nlsp rip command P2C-109
- ipx nlsp sap command P2C-109
- ipx output-ggs-filter command P2C-125
- ipx output-gns-filter command P2C-125
- ipx output-network-filter command P2C-124
- ipx output-rip-delay command P2C-130, P2C-131, P2C-133
- ipx output-sap-delay command P2C-130, P2C-131, P2C-135
- ipx output-sap-filter command P2C-124
- ipx pad-process-switched-packets command P2C-142
- ipx per-host-load-share command P2C-138
- ipx rip-max-packetsize command P2C-134, P2C-136
- ipx rip-multiplier command P2C-134
- ipx route-cache command P2C-140, P2C-142
- ipx route-cache inactivity-timeout command P2C-141
- ipx route-cache max-size command P2C-141
- ipx route command P2C-132
- ipx router command P2C-84, P2C-86, P2C-91, P2C-110
- ipx router eigrp command P2C-107
- ipx router-filter command P2C-124
- ipx router nlsp command P2C-93, P2C-102 to P2C-108
- ipx router-sap-filter command P2C-124
- ipx routing command P2C-79
- IPX SAP-after-RIP
- queries, disabling P2C-136
- task table P2C-136
- updates P2C-136
- ipx sap command P2C-134
- ipx sap-incremental command P2C-87
- ipx sap-incremental split-horizon command P2C-88
- ipx sap-max-packetsize command P2C-134
- ipx sap-multiplier command P2C-135
- ipx sap-queue-maximum command P2C-134
- ipx split-horizon command P2C-87
- ipx throughput command P2C-94
- ipx triggered-rip-delay command P2C-130, P2C-133
- ipx triggered-sap-delay command P2C-130, P2C-135
- ipx type-20-helpered command P2C-130
- ipx type-20-input-checks command P2C-129
- ipx type-20-output-checks command P2C-129
- ipx type-20-propagation command P2C-128, P2C-131
- ipx update interval command P2C-133, P2C-135
- ipx update sap-after-rip command P2C-136
- IPXWAN
- See IPX, IPXWAN
- ipx watchdog-spoof command P2C-115
- IRB
- interfaces
- IPX
K
- keepalives
- IPX P2C-115
- watchdog packets P2C-114
- SPX P2C-115
- Kinetics FastPath router
- KIP software P2C-33
- K-Star
- Shiva FastPath routers P2C-10
L
- LANE
- routing between emulated LANs P2C-3, P2C-5
- link-state packet (LSP)
- See NLSP, LSP
- LocalTalk P2C-1
- log-adjacency-changes command P2C-96, P2C-147
- log neighbor adjacencies
- AppleTalk enhanced IGRP P2C-47
- IPX Enhanced IGRP P2C-147
- lsp-gen-interval command P2C-96
- lsp-mtu command P2C-96
- lsp-refresh-interval command P2C-96
M
- MacIP
- addresses P2C-31, P2C-32
- address ranges P2C-30
- advantages P2C-30
- AppleTalk traffic P2C-53
- clients P2C-53
- description P2C-29
- disadvantages P2C-30
- implementation P2C-29
- requirements P2C-30
- servers P2C-31, P2C-53
- maximum paths
- AppleTalk
- setting P2C-40
- IPX
- description P2C-137
- setting P2C-138
- max-lsp-lifetime command P2C-96
- messages
- access list violation P2C-120
- logging P2C-120
- metrics
- routing
- IPX P2C-4
- XNS P2C-4
- MIB
- AppleTalk P2C-2
- IPX P2C-4
- NLSP P2C-90
- modes
- See command modes
- multicast command P2C-93
N
- Name Binding Protocol
- See NBP
- named IPX access lists P2C-119
- name display facility
- AppleTalk P2C-25
- NBMA network
- addresses advertised P2C-114
- logical versus physical (figure) P2C-159
- NBP P2C-2
- definition P2C-2, P2C-25
- description P2C-25
- name registration
- task table P2C-53
- services P2C-53
- NetBIOS
- IPX
- filtering messages P2C-126
- NetBIOS, IPX P2C-125
- access control P2C-125
- filters (example) P2C-171
- netbios access-list command P2C-121
- network command P2C-84, P2C-107
- network numbers
- IPX P2C-77
- Next Hop Resolution Protocol
- See NHRP
- NHRP
- enabling P2C-111
- IPX
- holdtime P2C-114
- initiation, controlling P2C-113
- loop detection P2C-113
- next hop server P2C-113
- packet rate P2C-113
- record options, suppressing P2C-113
- requests, triggering P2C-113
- time addresses P2C-114
- NHRP for IPX
- access lists P2C-112
- authentication P2C-112
- cache
- clearing, dynamic entries P2C-148
- clearing, static entries P2C-148
- monitoring P2C-147
- initiation, controlling P2C-112
- next hop server P2C-111, P2C-112
- static IPX-to-NBMA address mapping P2C-111
- task list P2C-110
- traffic, monitoring P2C-147
- NLSP
- adjacencies P2C-147
- adjacency state P2C-147
- CSNP interval, specifying P2C-85, P2C-94, P2C-95
- database P2C-147
- default routes
- advertising P2C-142
- designated router
- definition P2C-95
- election priority, specifying P2C-95
- pseudonode P2C-95
- enabling on an interface
- LAN P2C-91
- WAN P2C-92
- Enhanced IGRP route redistribution P2C-86, P2C-110
- (example) P2C-156
- GNS queries, replying to P2C-137
- hello interval, specifying P2C-95
- hop count, maximum from RIP updates P2C-85, P2C-94
- internal network number, setting P2C-91
- link delay, specifying P2C-94
- LSP P2C-96
- LSP (link-state packet) P2C-96
- metric, specifying P2C-94
- MIB P2C-90
- multicast addressing
- disabling P2C-93
- disabling (examples) P2C-155
- multiple encapsulations P2C-80, P2C-91
- neighbors P2C-147
- partial route calculation, setting interval P2C-96
- pseudonode P2C-95
- RIP entries, aging out P2C-134
- RIP packets
- maximum size P2C-136
- processing P2C-109
- route aggregation P2C-96
- aggregated routes P2C-97
- area addresses P2C-97
- area addresses and route summaries P2C-97
- areas P2C-98
- benefits P2C-99
- configuration task list P2C-101
- customized route summarization P2C-100
- default route redistribution P2C-98 to P2C-99
- default route summarization P2C-99
- Enhanced IGRP and NLSP 1.1 P2C-106
- filtering and route summarization, relationship P2C-100
- multiple NLSP 1.1 areas
- (example) P2C-156
- multiple NLSP 1.1 areas, configuring P2C-101
- multiple NLSP versions in a single area, mixing P2C-98
- NLSP 1.1, Enhanced IGRP, and RIP
- (example) P2C-157
- NLSP 1.1 and NLSP 1.0 areas
- (example) P2C-156
- NLSP 1.1 and NLSP 1.0 areas, configuring P2C-103
- path selection P2C-101
- RIP and NLSP 1.1, configuring P2C-108
- route summaries P2C-97
- route summarization P2C-99
- service selection P2C-101
- single versus multiple areas P2C-98
- SAP
- entries
- aging out P2C-135
- packets
- maximum size P2C-134
- shortest path first algorithm (SPF)
- calculation interval P2C-96
- subinterfaces P2C-80, P2C-91
- configuring (example) P2C-150
- shutting down (example) P2C-150
- throughput, specifying P2C-94
- NLSP Multicast Addressing
- (examples) P2C-155
- task list P2C-92
- NLSP Multicast Support
- overview P2C-92
- See also NLSP Multicast Addressing
- node numbers
- IPX P2C-77
- no form of a command
- using xxiii
- nonbroadcast, multiaccess network
- See NBMA network
- nonextended network
- AppleTalk P2C-7
- notes
- usage in text xvii
- Novell IPX
- See IPX
O
- online documentation
- See CCO
P
- padding packets, IPX P2C-142
- Phase 1
- See AppleTalk, Phase 1
- Phase 2
- See AppleTalk, Phase 2
- ping command
- AppleTalk P2C-53
- IPX P2C-146
- Plain English IPX Access List
- types P2C-119
- PPP
- IPX P2C-115
- priority-list protocol command P2C-20
- privileged EXEC mode
- summary xx
- prompts
- system xx
- proxy network numbers
- (example) P2C-73
- interoperability P2C-40
- pseudonode, NLSP P2C-95
Q
- question command xxi
R
- redistribute command P2C-86, P2C-110
- route aggregation P2C-102, P2C-103, P2C-105, P2C-108, P2C-109
- redistribution
- AppleTalk Enhanced IGRP P2C-45
- IPX Enhanced IGRP P2C-86
- responder support
- AppleTalk P2C-54
- RFC 1243 P2C-2
- RFC 1553, IPX header compression over WAN media P2C-115
- RFC 1634 P2C-115
- RIP
- IPX
- description P2C-132
- disable sending of general query P2C-136, P2C-137
- timers P2C-133
- updates, delays P2C-133
- updates, linking to SAP P2C-136
- updates, linking to SAP updates P2C-136
- ROM monitor mode
- summary xx
- route aggregation, configuring NLSP
- See NLSP
- route-aggregation command P2C-102 to P2C-109
- route cache
- size P2C-140
- route cache invalidation
- controlling P2C-141
- route redistribution
- Enhanced IGRP
- NLSP P2C-86
- Enhanced IGRP and NLSP
- (example) P2C-156
- Enhanced IGRP NLSP, configuring P2C-110
- See also redistribution
- routes
- static
- IPX P2C-132
- routing table
- AppleTalk P2C-53
- controlling P2C-38
- update timers P2C-39
- IPX P2C-124, P2C-145
- Routing Table Maintenance Protocol
- See RTMP
- routing tables
- AppleTalk
- update filters P2C-22
- RTMP P2C-2
- advertising routes with no zones P2C-39
- definition P2C-2
- interfaces P2C-14
- routing table
- update timers P2C-39
- routing updates P2C-39
- strict checking P2C-38
- stub mode P2C-38
S
- SAP
- delay between packets P2C-135
- setting P2C-130, P2C-131
- description P2C-4
- filters
- creating P2C-124
- filters (example) P2C-167
- filters (examples) P2C-168
- general query
- disabling P2C-136, P2C-137
- queue length
- setting P2C-134
- responses to GNS requests
- controlling P2C-137
- static entries
- configuring P2C-134
- table
- static entries P2C-134
- updates
- Enhanced IGRP P2C-87
- linking to RIP P2C-136
- setting P2C-135
- update timers P2C-135
- saving configuration changes xxiii
- secondary networks, IPX
- See IPX, secondary networks
- seed router
- AppleTalk P2C-13
- Sequenced Packet Exchange
- See SPX
- Service Advertisement Protocol
- See SAP
- Shiva FastPath router
- K-Star P2C-10
- show appletalk access-lists command P2C-53
- show appletalk adjacent-routes command P2C-53
- show appletalk arp command P2C-53
- show appletalk aurp events command P2C-53
- show appletalk aurp topology command P2C-53
- show appletalk cache command P2C-53
- show appletalk domain command P2C-53
- show appletalk eigrp interfaces command P2C-53
- show appletalk eigrp neighbors command P2C-53
- show appletalk eigrp topology command P2C-53
- show appletalk globals command P2C-53
- show appletalk interface command P2C-53
- show appletalk macip-clients command P2C-53
- show appletalk macip-servers command P2C-53
- show appletalk macip-traffic P2C-53
- show appletalk name-cache command P2C-53
- show appletalk nbp command P2C-53
- show appletalk neighbors command P2C-53
- show appletalk remap command P2C-53
- show appletalk route command P2C-53
- show appletalk socket command P2C-53
- show appletalk static command P2C-53
- show appletalk traffic command P2C-53
- show appletalk zone command P2C-53
- show ip nhrp command P2C-147
- show ip nhrp traffic command P2C-147
- show ipx accounting command P2C-148
- show ipx cache command P2C-145
- show ipx eigrp interfaces command P2C-146
- show ipx eigrp neighbors command P2C-146
- show ipx eigrp topology command P2C-146
- show ipx interface command P2C-145
- show ipx nlsp database command P2C-147
- show ipx nlsp neighbors command P2C-147
- show ipx nlsp spf-log command P2C-147
- show ipx route command P2C-145, P2C-146
- show ipx servers command P2C-145
- show ipx traffic command P2C-145, P2C-146
- show smrp forward command P2C-53
- show smrp globals command P2C-53
- show smrp group command P2C-53
- show smrp mcache command P2C-53
- show smrp neighbor command P2C-53
- show smrp port command P2C-54
- show smrp route command P2C-54
- show smrp traffic command P2C-54
- show sse summary command P2C-145
- Silicon Switch Processor
- See SSP
- SLIP
- drivers
- IPTalk P2C-32
- SMDS
- fast switching
- IPX P2C-114
- SMRP
- fast switching cache table P2C-53
- traffic table P2C-54
- smrp mroute-cache protocol appletalk command P2C-36
- SNMP
- AppleTalk, configuring P2C-28
- snmp-server community command P2C-28
- spf-interval command P2C-96
- split horizon
- AppleTalk Enhanced IGRP P2C-46
- IPX Enhanced IGRP P2C-86
- spoofing
- IPX P2C-115
- SPX keepalive packets over DDR P2C-115
- SPX, spoofing of keepalive packets P2C-115
- SSP
- statistics summary
- standard access lists
- See access lists, IPX
- static routes
- AppleTalk P2C-51, P2C-53
- IPX P2C-132
- subinterface configuration mode
- summary xx
- subinterfaces
- defined P2C-80
- IPX P2C-91
- configuring (example) P2C-150
- shutting down (example) P2C-150
- NLSP P2C-91
- configuring (example) P2C-150
- shutting down (example) P2C-150
- synchronizing SAP and RIP updates P2C-136
T
- Tab key
- command completion xxi
- test appletalk command P2C-54
- tick count
- IPX P2C-132
- time range command P2C-122
- timers
- IPX Enhanced IGRP, adjusting P2C-85
- TokenTalk P2C-1
- topology table
- AppleTalk Enhanced IGRP P2C-53
- IPX Enhanced IGRP P2C-146
- transition mode
- AppleTalk P2C-15
- (example) P2C-57
- tunnel destination command P2C-26, P2C-27, P2C-29
- tunneling
- AURP P2C-26
- cayman P2C-29
- GRE P2C-29
- methods P2C-28
- tunnel mode command P2C-26, P2C-29, P2C-34
- tunnel source command P2C-26, P2C-27, P2C-29, P2C-34
- type 20 packets P2C-128, P2C-129
U
- UDP port numbers
- IPTalk P2C-35
- user EXEC mode
- summary xx
V
- VLANs
- AppleTalk support P2C-3
- IPX support P2C-5
W
- watchdog packets P2C-115
X
- Xerox Network Systems
- See XNS
- XNS
- IDP P2C-4
- routing metrics P2C-4
Z
- ZIP
- definition P2C-2
- query interval P2C-42
- reply filters P2C-24
- Zone Information Protocol
- See ZIP
- zones
- See AppleTalk, zones
Copyright 1989-2000
©
Cisco Systems Inc.
