Index: Cisco IOS Apollo Domain, Banyan VINES, DECnet, ISO CLNS, and XNS Configuration Guide, Release 2.1
Symbols A B C D E F G H I L M N O P Q R S T U V W X
Symbols
- ? command xix
A
- abbreviating commands
- context-sensitive help xix
- access control
- DECnet P3C-44
- VINES P3C-16
- XNS P3C-118 to P3C-121
- access groups
- DECnet P3C-43
- access-list command
- DECnet P3C-43
- access lists
- Apollo Domain
- applying to an interface P3C-7
- creating P3C-7
- DECnet
- adding filters to P3C-43
- configuring P3C-42
- connect-initiate packets, filtering P3C-43
- creating P3C-42
- extended P3C-43
- standard P3C-42
- ISO CLNS
- configuring P3C-83
- VINES
- creating P3C-17
- displaying P3C-24
- extended P3C-16
- simple P3C-16
- standard P3C-16
- types P3C-16
- XNS
- 3Com (example) P3C-128
- creating P3C-120
- extended list P3C-119
- filters P3C-120, P3C-121
- standard list P3C-118
- accounting
- DECnet
- configuring P3C-44
- database threshold P3C-45
- enabling P3C-44, P3C-45
- filters P3C-45
- maximum transit entries P3C-45
- addresses
- Apollo Domain P3C-5
- DECnet
- (example) P3C-32
- address translation P3C-36
- MAC address P3C-32
- mapping name P3C-37
- ISO CLNS
- addressing rules P3C-62
- IS-IS NSAPs P3C-60
- ISO IGRP NSAPs P3C-60
- NSAPs, addressing structure P3C-62
- TARP P3C-95
- VINES P3C-13
- (example) P3C-14
- network number P3C-13
- subnetwork number P3C-14
- XNS P3C-116
- address translation gateway
- See ATG
- AFI field
- NSAP addresses P3C-61
- all-nets broadcasts
- XNS P3C-123
- apollo access-group command P3C-7
- apollo access-list command P3C-7
- Apollo Domain
- 802.5 implementation P3C-2
- access lists P3C-7
- (example) P3C-10
- addresses P3C-5
- (figure) P3C-5
- ARP P3C-1
- ARP table P3C-9
- bridging P3C-7
- Cisco's implementation P3C-1
- configuration
- (examples) P3C-10 to P3C-11
- task list P3C-6
- host number P3C-5
- interfaces, displaying status P3C-9
- monitoring tasks P3C-9
- network
- access P3C-7
- network number P3C-5
- paths, setting maximum P3C-9
- restrictions
- bridging P3C-1
- setting IP addresses P3C-1
- routing
- concurrent P3C-7
- enabling P3C-6
- over WANs P3C-9
- routing table entries
- adding P3C-8
- displaying P3C-9
- update interval P3C-8
- setting IP addresses P3C-1
- static routes, adding to routing table P3C-8
- traffic, displaying statistics P3C-9
- apollo maximum-paths command P3C-9
- apollo network command P3C-6
- apollo route command P3C-8
- apollo routing command P3C-6
- apollo update-time command P3C-8
- area addresses
- IS-IS P3C-60, P3C-61
- ISO IGRP P3C-60
- NSAPs P3C-60
- area-password command P3C-74
- area routing
- IS-IS P3C-64
- ISO IGRP P3C-64
- areas
- IS-IS for CLNS
- addresses P3C-70
- establishing P3C-70
- multihoming P3C-70
- ISO CLNS P3C-60, P3C-70
- multihoming P3C-70
- ISO IGRP P3C-64
- area tag
- IS-IS P3C-69, P3C-71
- ARP
- Apollo Domain P3C-1
- ARP table
- Apollo Domain P3C-9
- ATG
- configuring P3C-36
- example P3C-51
- routing table P3C-51
B
- Banyan VINES
- See VINES
- bridge crb command P3C-7, P3C-35
- DECnet P3C-35
- ISO CLNS P3C-63
- VINES P3C-15
- XNS P3C-118
- broadcast routing timer P3C-48
- broadcasts
- Net/One P3C-116
- VINES
- forwarding P3C-23
- serverless networks P3C-16
- XNS
- all-nets P3C-123, P3C-125, P3C-126
- directed P3C-123
- flooding P3C-124, P3C-126
- forwarding P3C-124, P3C-125
- local P3C-123
C
- cautions
- usage in text xv
- CCO
- accessing xv
- definition xv
- Cisco Connection Online
- See CCO
- Cisco IOS
- saving configuration changes xxii
- clear clns cache command P3C-92
- clear clns neighbors command P3C-92
- clear clns route command P3C-92
- clear decnet counters command P3C-49
- clear tarp counters command P3C-98
- clear tarp ldb-table command P3C-98
- clear tarp tid-table command P3C-98
- clear vines cache command P3C-23
- clear vines ipc command P3C-23
- clear vines neighbor command P3C-23
- clear vines route command P3C-23
- clear vines traffic command P3C-23
- CLNP ISO documentation P3C-4
- CLNS
- See ISO CLNS
- clns access-group command P3C-83
- clns adjacency-filter command P3C-83
- clns cluster-alias command P3C-87
- clns configuration-time command P3C-86
- clns congestion-threshold command P3C-90
- clns dec-compatible command P3C-87
- clns enable command P3C-80
- clns erpdu-interval command P3C-91
- clns esct-time command P3C-87
- clns es-neighbor command P3C-81
- clns filter-expr command P3C-83
- clns filter-set command P3C-83
- clns holding-time command P3C-86
- clns host command P3C-82
- clns is-neighbor command P3C-81
- clns mtu command P3C-89, P3C-90
- clns net command P3C-79, P3C-80
- clns packet-lifetime command P3C-92
- clns rdpdu-interval command P3C-91
- clns route-cache command P3C-90
- clns route command P3C-79, P3C-80
- clns route default command P3C-80
- clns router iso-igrp command P3C-66
- clns routing command P3C-79
- clns security pass-through command P3C-88
- clns send-erpdu command P3C-91
- clns send-rdpdu command P3C-91
- clns split-horizon command P3C-68
- clns template-alias command P3C-83
- clns want-erpdu command P3C-92
- cluster aliases
- DECnet P3C-87
- command modes
- summary (table) xviii
- command syntax conventions
- Cisco IOS documentation xv
- complete sequence number PDU
- IS-IS for CLNS, configuring P3C-72
- concurrent routing and bridging
- Apollo Domain P3C-7
- DECnet P3C-35
- ISO CLNS P3C-63
- VINES P3C-15
- XNS P3C-118
- configuration, saving xxii
- congestion threshold
- DECnet P3C-47
- ISO CLNS P3C-90
- Connectionless Network Protocol (CLNP) ISO documentation P3C-4
- Connectionless Network Service
- See ISO CLNS
- cost
- DECnet
- assigning to interfaces P3C-34
- interarea routing P3C-39
- intra-area routing P3C-39
- counters
- DECnet
- clearing P3C-49
- CSNP interval
- IS-IS for CLNS, configuring P3C-72
D
- DECnet
- access groups, configuring P3C-43
- access lists
- adding filters to P3C-43
- configuring P3C-42
- creating P3C-42
- accounting
- configuring P3C-44
- database threshold P3C-45
- enabling P3C-44, P3C-45
- filters P3C-45
- maximum transit entries P3C-45
- address mapping P3C-37
- address translation P3C-36
- address translation, configuring P3C-51
- advertising Phase IV through OSI backbone P3C-38
- area P3C-32
- ATG, configuring P3C-36
- broadcast routing timers, adjusting P3C-48
- Cisco's implementation P3C-2
- cluster alias configuration P3C-87
- concurrent routing and bridging P3C-35
- congestion threshold, setting P3C-47
- connect initiate packets, filtering P3C-43
- conversion, Phase IV-to-Phase V P3C-37
- cost, assigning to interfaces P3C-34
- DDR, configuring P3C-48
- designated routers, specifying P3C-40
- enabling concurrent routing and bridging P3C-35
- encapsulation over Token Ring P3C-35
- equal cost path P3C-46
- extended access lists, configuring P3C-43
- fast switching, disabling P3C-47
- filters P3C-44
- hello timers, adjusting P3C-47
- hop count, setting P3C-39, P3C-40
- hops, setting
- Level 1 routers P3C-39
- Level 2 routers P3C-40
- host name mapping P3C-37
- interarea routing P3C-35
- interfaces
- Token Ring P3C-35
- intra-area routing P3C-35
- IPX, configuration caveat P3C-32
- Level 1 routers, configuring P3C-39
- Level 2 routers, configuring P3C-39
- MAC addresses P3C-32
- media supported P3C-2
- MOP P3C-49
- multicast address
- mapping to functional address P3C-33
- name mapping P3C-37
- network, monitoring and maintaining P3C-49
- node
- specifying P3C-35
- OSI backbone, propagating Phase IV areas through P3C-38
- packet visits, configuring P3C-46
- parameters, Cisco's implementation P3C-3
- path selection, configuring P3C-46
- performance optimization P3C-45
- Phase IV areas through OSI backbone (example) P3C-54
- Phase IV Prime
- allowing arbitrary MAC address P3C-33
- assigning cost to interface P3C-34
- Phase IV-to-Phase V conversion P3C-3, P3C-37
- Poor Man's Routing P3C-37
- route cost, setting
- Level 1 routers P3C-39
- Level 2 routers P3C-39
- routing
- disabling P3C-32
- enabling P3C-51
- concurrent routing and bridging P3C-35
- on interfaces P3C-34
- over WANs P3C-48
- static P3C-40
- routing table size P3C-38
- split horizon P3C-48
- static discard routes, injecting P3C-38
- static routes P3C-42
- static routing, configuring P3C-40, P3C-41
- timers, adjusting P3C-47, P3C-48
- Token Ring, configuring on P3C-35
- decnet access-group command P3C-43
- decnet accounting command P3C-44, P3C-45
- decnet accounting list command P3C-45
- decnet accounting threshold command P3C-45
- decnet accounting transits command P3C-45
- decnet advertise command P3C-38
- decnet area-max-cost command P3C-40
- decnet area-max-hops command P3C-40
- decnet congestion-threshold command P3C-47
- decnet conversion command P3C-37
- decnet encapsulation command P3C-36
- decnet hello-timer command P3C-47
- decnet host command P3C-37
- decnet in-routing-filter command P3C-44
- decnet map command P3C-36
- decnet max-cost command P3C-39
- decnet max-hops command P3C-39
- decnet max-paths command P3C-46
- decnet max-visits command P3C-47
- decnet node-type command P3C-35
- decnet out-routing-filter command P3C-44
- decnet path-split-mode interim command P3C-46
- decnet path-split-mode normal command P3C-46
- decnet propagate command P3C-42
- decnet route-cache command P3C-47
- decnet route command P3C-40, P3C-41
- decnet routing command P3C-32
- decnet split-horizon command P3C-48
- default form of a command
- using xxi
- designated routers
- DECnet, specifying P3C-40
- IS-IS, specifying election P3C-73
- destination routing table
- ISO CLNS, displaying P3C-93
- distance command P3C-86
- DNS
- ISO CLNS address discovery P3C-82
- documentation conventions
- Cisco IOS xiv
- Domain
- See Apollo Domain
- domain-password command P3C-74
- domains
- ISO CLNS P3C-60
- ISO IGRP P3C-60
- DSP field
- NSAP address P3C-59
- dynamic routing
- See ISO CLNS, dynamic routing
E
- encapsulation
- DECnet on Token Rings P3C-35
- VINES P3C-18
- XNS P3C-118
- end system
- See ES
- ERPDU
- configuring P3C-91
- disabling P3C-91
- interval, determining P3C-91
- error protocol data unit
- See ERPDU
- ES
- communicating with another ES P3C-80
- listing, for NSAP-to-SNPA mapping P3C-81
- neighbors P3C-92
- ES-IS
- configuring P3C-86
- hello rate configuration P3C-86
- protocol P3C-81
F
- fast switching
- DECnet
- disabling P3C-47
- ISO CLNS P3C-90
- VINES
- deleting P3C-23
- disabling P3C-21
- displaying P3C-24
- XNS
- disabling P3C-126
- filters
- DECnet
- adding to access lists P3C-43
- ISO CLNS, creating P3C-83
- VINES
- applying to interface P3C-17
- types P3C-16
- XNS
- applying to interface P3C-121
- creating P3C-120, P3C-121
- types (table) P3C-119
- floating static routes
- VINES P3C-22
G
- global configuration mode
- summary xviii
- GOSIP
- ISO CLNS compliance with P3C-4
- NSAP format P3C-62
- Government OSI Profile
- See GOSIP
H
- HDLC
- encapsulation
- ISO CLNS P3C-4
- hello packets P3C-72
- DECnet
- adjusting timers P3C-47
- ISO CLNS P3C-86
- ES-IS, configuring interval P3C-86
- Net/One P3C-115
- VINES P3C-19
- help command xix
- hop count
- DECnet P3C-39, P3C-40
- host name table
- VINES
- displaying entries P3C-24
- host number
- Apollo Domain P3C-5
- XNS P3C-116, P3C-124
I
- IDP
- NSAP address field P3C-59
- ignore-lsp-errors command P3C-76
- interarea router
- See Level 2 router
- interarea routing
- DECnet P3C-39, P3C-40
- interdomain routing
- ISO IGRP P3C-64
- interface configuration mode
- summary xviii
- interfaces
- DECnet costs P3C-34
- VINES P3C-15, P3C-17
- XNS routing P3C-118
- interface tokenring command P3C-36
- intermediate system
- See IS
- intra-area router
- See Level 1 router
- intra-area routing
- DECnet P3C-39
- IPC connections
- VINES P3C-24
- ip domain-lookup nsap command P3C-82
- IPX
- DECnet configuration caveat P3C-32
- IS
- Level 1 P3C-64, P3C-81
- Level 2 P3C-64, P3C-81
- listing, for NSAP-to-SNPA mapping P3C-81
- neighbors P3C-92
- isis adjacency-filter command P3C-83
- isis circuit-type command P3C-74
- isis csnp-interval command P3C-72
- IS-IS Dynamic Routing P3C-68
- IS-IS for CLNS
- adjacency, specifying desired P3C-74
- adjacency state changes P3C-77
- area password, setting P3C-74
- area routing P3C-64
- Cisco's implementation P3C-61
- CSNP interval, configuring P3C-72
- designated router election P3C-73
- domain password, setting P3C-74
- dynamic routing, configuring P3C-69
- hello interval, configuring P3C-72
- hello multiplier, configuring P3C-72
- ignore LSPs P3C-76
- interface parameter, configuring P3C-71
- Level 1 routers P3C-64
- Level 1 routing table, displaying P3C-93
- link
- state
- database, displaying P3C-93
- link-state
- metric, configuring P3C-71
- LSP
- MTU size, setting P3C-77
- retransmission interval, configuring P3C-73
- password
- assigning P3C-74
- authentication P3C-74
- router level support, configuring P3C-76
- routing
- configuration (example) P3C-103
- information redistribution P3C-83
- system routing P3C-64
- IS-IS for IP
- area tag P3C-69, P3C-71
- isis hello-interval command P3C-72
- isis hello-multiplier command P3C-72
- isis metric command P3C-72
- IS-IS Multiarea Support
- configuration
- (example) P3C-104
- LSP flooding P3C-75
- output of show commands P3C-78
- partitioning avoidance P3C-77
- routing level P3C-78
- isis password command P3C-74
- isis priority command P3C-73
- isis retransmit-interval command P3C-73
- ISO CLNS
- access lists, creating P3C-83
- addresses
- assigning P3C-60
- background P3C-59
- multiple area P3C-60
- rules P3C-62
- adjacencies
- CLNS neighbors P3C-92
- ES neighbors P3C-92
- establishing P3C-83
- IS neighbors P3C-92
- areas
- assigning P3C-60
- multihoming P3C-70
- basic static routing (example) P3C-108
- Cisco's implementation P3C-4
- clearing cache P3C-92
- CLNP ISO documentation P3C-4
- concurrent routing and bridging P3C-63
- configuration
- (examples) P3C-99
- tasks P3C-65
- configuring
- overlapping areas P3C-101
- over WANs P3C-88
- performance parameters P3C-89
- congestion threshold P3C-90
- DECnet cluster alias configuration P3C-87
- destination routing table, displaying P3C-93
- Digital-compatible mode configuration P3C-87
- displaying general information P3C-92
- DNS queries P3C-82
- domains
- addresses P3C-60
- establishing P3C-60
- dynamic routing
- configuring P3C-66
- examples P3C-100 to P3C-102
- in overlapping areas P3C-101
- interdomain routing (example) P3C-102
- NSAPs P3C-59
- protocol support P3C-64
- within a domain P3C-100
- ERPDU, disabling P3C-91
- ES-IS
- ISO documentation P3C-4
- parameters P3C-86
- protocol P3C-81
- ES neighbors P3C-92
- fast switching P3C-90
- filter expressions
- creating P3C-83
- displaying P3C-92
- displaying filter sets P3C-92
- GOSIP compliance P3C-4
- HDLC encapsulation P3C-4
- hello packets, specifying P3C-86
- IGRP support P3C-4
- interdomain routing (example) P3C-110
- interfaces
- displaying information P3C-92
- enabling on P3C-80
- intradomain static routing (example) P3C-109
- IS-IS, ISO documentation P3C-4
- IS neighbors P3C-92
- ISO standards supported P3C-4
- local source packet parameters P3C-92
- maintaining, network P3C-92
- MTU P3C-89
- multihoming P3C-70
- neighbors
- listing, for NSAP-to-SNPA mapping P3C-81
- NETs P3C-59
- assigning P3C-60
- next hop P3C-62
- network connectivity, testing P3C-92
- NSAPs
- address rules P3C-62
- and NETs in ISO network architecture P3C-59
- dynamic routing P3C-59
- field formats P3C-59
- prefix P3C-62
- n-selector P3C-59
- OSI standard P3C-59
- packet lifetime P3C-92
- protocols supported P3C-4
- QOS option P3C-88
- record route option P3C-88
- redistribution
- address match P3C-85
- routes
- entering P3C-62
- next hop NET P3C-62
- NSAPs prefix P3C-62
- routing
- dynamic
- See ISO CLNS, dynamic routing
- in more than one area P3C-101
- static routes
- See ISO CLNS, static routing
- routing cache
- clearing P3C-92
- displaying entries P3C-92
- dynamic entries P3C-63
- reinitializing P3C-92
- static entries P3C-63
- routing protocols supported P3C-4
- security-option packets, allowing to pass P3C-88
- source route option P3C-88
- static routing P3C-64
- support of P3C-4
- Target Identifier Address Resolution Protocol
- See TARP
- traffic statistics, displaying P3C-93
- X.25 encapsulation P3C-4
- ISO IGRP
- addressing P3C-60
- adjacency P3C-83
- area routing P3C-64
- areas P3C-64
- border routers P3C-83
- Cisco's implementation P3C-61
- configuring P3C-66
- enabling P3C-66
- filters P3C-83
- interdomain routing P3C-64
- Level 1 routers P3C-64
- metric adjustments P3C-67
- NETs, configuring P3C-66
- packet forwarding P3C-83
- preferred routes P3C-86
- processes per router P3C-66
- route maps P3C-84
- router level, specifying P3C-66
- routing
- information redistribution P3C-83
- processes, displaying P3C-93
- split horizon P3C-67
- system IDs P3C-64
- system routing P3C-64
- timing parameter adjustments P3C-67
- iso-igrp adjacency-filter command P3C-83
- is-type command P3C-76
L
- lcnode command P3C-2
- Level 1 router
- adjacency P3C-74
- IS P3C-81
- ISO IGRP P3C-76
- Level 2 router
- adjacency P3C-74
- IS P3C-81
- ISO IGRP P3C-64
- routing updates P3C-66
- link-state metrics
- IS-IS for CLNS, configuring P3C-71
- link-state packet
- See LSP
- local routers
- See Level 1 router
- log-adjacency-changes command P3C-77
- LSP
- ignore packets P3C-76
- retransmission interval P3C-73
- lsp-mtu command P3C-77
M
- MAC addresses
- DECnet P3C-32
- mapping
- name to DECnet address P3C-37
- match clns address command P3C-85
- match clns interface command P3C-85
- match clns next-hop command P3C-85
- match clns route-source command P3C-85
- match metric command P3C-85
- maximum paths
- Apollo Domain, setting P3C-9
- XNS, setting P3C-123
- metrics
- routing
- Net/One P3C-4, P3C-116
- VINES P3C-2
- XNS P3C-4, P3C-116
- metric weights command P3C-67
- modes
- See command modes
- MOP
- DECnet P3C-49
- mop enabled command P3C-49
- mop sysid command P3C-49
- MTU
- ISO CLNS P3C-89
- LSP size P3C-77
- multihoming
- areas P3C-70
- IS-IS areas P3C-70
- ISO CLNS P3C-70
N
- name mapping
- DECnet address P3C-37
- NETs P3C-82
- NSAPs P3C-82
- NCP
- DECnet parameters P3C-3
- neighbors, ISO CLNS P3C-81
- neighbor stations
- VINES P3C-22, P3C-24
- Net/One
- booting protocol P3C-115
- differences from XNS P3C-115
- emulation mode P3C-116
- enabling P3C-118
- receiving RIP updates P3C-116
- flooding broadcasts P3C-116
- hello packets P3C-4, P3C-115
- metrics, routing P3C-4, P3C-116
- network management
- consoles, configuring P3C-115
- protocols P3C-116
- network resource monitor P3C-116
- RIP updates P3C-115
- routing, enabling P3C-118, P3C-128
- routing protocol P3C-115
- net command
- ISO IGRP P3C-66
- NETs
- configuring P3C-66
- ISO CLNS addresses P3C-59
- ISO IGRP, number per router P3C-66
- name mapping P3C-82
- Network Control Program
- See NCP
- network entity titles
- See NETs
- network management consoles
- Net/One P3C-115
- network number
- Apollo Domain P3C-5
- VINES P3C-13
- XNS P3C-116
- network resource monitor
- Net/One P3C-116
- network service access points
- See NSAPs
- node P3C-32
- no form of a command
- using xxi
- notes
- usage in text xv
- NSAPs
- address rules P3C-62
- address structure (figure) P3C-61
- area addresses P3C-60, P3C-61
- domains, ISO IGRP P3C-60
- dynamic routing P3C-59
- field formats P3C-60
- fields P3C-59
- GOSIP format P3C-62
- IS-IS addresses P3C-60
- ISO CLNS addresses P3C-59
- ISO documentation
- ISO IGRP addresses P3C-60
- Level 1 routing P3C-60
- mapping addresses to media addresses P3C-80
- media address
- mapping P3C-81
- name mapping P3C-82
- n-selector P3C-60, P3C-61
- prefix P3C-80
- shortcut command P3C-82
- SNPA mapping P3C-81
- static address
- assignments P3C-80
- system ID P3C-60, P3C-61
- n-selector
- IS-IS P3C-61
- ISO CLNS P3C-59
- ISO IGRP P3C-60
O
- online documentation
- See CCO
- OSI
- See ISO CLNS
P
- passwords
- IS-IS for CLNS
- area, assigning on P3C-74
- authentication P3C-74
- configuring P3C-74
- domain, assigning on P3C-74
- interface, assigning on P3C-74
- paths
- Apollo Domain, setting maximum P3C-9
- XNS, setting maximum P3C-123
- PDU
- error
- See ERPDU
- Phase IV Prime
- configuration example P3C-50
- ping command
- DECnet
- privileged P3C-49
- user P3C-49
- ISO CLNS
- privileged P3C-92
- VINES P3C-24
- XNS P3C-127
- Poor Man's Routing, on DECnet P3C-37
- preferred routes, specifying with ISO IGRP P3C-86
- privileged EXEC mode
- summary xviii
- prompts
- system xviii
- protocol data unit (PDU)
- See ERPDU
Q
- QoS
- ISO CLNS use of P3C-88
- question command xix
R
- RDPDU
- interval to disable P3C-91
- ISO CLNS, configuring for sending P3C-91
- redirect protocol data unit
- See RDPDU
- redistribute command
- ISO CLNS P3C-84
- redistribute static command P3C-84
- redistribution
- match criteria
- address P3C-85
- route maps, using P3C-84
- routes P3C-84
- retransmission interval
- setting LSP P3C-73
- RFC 1348
- Domain Name System P3C-82
- RIP
- Net/One updates P3C-115
- XNS updates P3C-115
- delay between updates P3C-122
- receiving P3C-116, P3C-118
- setting timers P3C-122
- timer (example) P3C-129
- ROM monitor mode
- summary xviii
- route cost
- DECnet P3C-39
- setting P3C-39
- route-map command P3C-84
- route maps
- ISO IGRP, redistributing into P3C-84
- router iso-igrp command P3C-66
- routes
- static
- VINES P3C-22
- XNS P3C-122
- routing
- Apollo Domain P3C-6
- VINES P3C-15
- routing cache, ISO CLNS
- clearing P3C-92
- displaying entries P3C-92
- reinitializing P3C-92
- routing table
- Apollo Domain P3C-8, P3C-9
- ISO CLNS
- dynamic entries P3C-63
- static entries P3C-63
- RIP update timers P3C-122
- VINES P3C-22, P3C-23, P3C-24
- XNS P3C-121
- Routing Table Protocol
- See VINES, RTP
- rtchk command P3C-2
- RTP
- See VINES, RTP
S
- saving configuration changes xxii
- Sequenced Routing Update Protocol
- See SRTP
- set level command P3C-85
- set metric command P3C-85
- set metric-type command P3C-85
- set tag command P3C-85
- show apollo arp command P3C-9
- show apollo interface command P3C-9
- show apollo route command P3C-9
- show apollo traffic command P3C-9
- show clns cache command P3C-92
- show clns command P3C-92
- show clns es-neighbors command P3C-92
- show clns filter-expr command P3C-92
- show clns filter-set command P3C-92
- show clns interface command P3C-92
- show clns is-neighbors command P3C-92
- show clns neighbor areas command P3C-93
- show clns neighbors command P3C-92
- show clns protocol command P3C-93
- show clns route command P3C-93
- show clns traffic command P3C-93
- show decnet command P3C-49
- show decnet interface command P3C-49
- show decnet map command P3C-49
- show decnet neighbors command P3C-49
- show decnet route command P3C-49
- show decnet static command P3C-49
- show decnet traffic command P3C-49
- show isis database command P3C-93
- show isis routes command P3C-93
- show isis spf-log command P3C-93
- show isis topology command P3C-93
- show route-map command P3C-93
- show tarp blacklisted-adjacencies command P3C-99
- show tarp command P3C-99
- show tarp host command P3C-99
- show tarp interface command P3C-99
- show tarp ldb command P3C-99
- show tarp map command P3C-99
- show tarp static-adjacencies command P3C-99
- show tarp tid-cache command P3C-99
- show tarp traffic command P3C-99
- show vines access command P3C-24
- show vines cache command P3C-24
- show vines host command P3C-24
- show vines interface command P3C-24
- show vines ipc command P3C-24
- show vines neighbors command P3C-24
- show vines route command P3C-24
- show vines services command P3C-24
- show vines traffic command P3C-24
- show xns cache command P3C-127
- show xns interface command P3C-127
- show xns route command P3C-127
- show xns traffic command P3C-127
- single route
- VINES P3C-21
- SNPA
- masks P3C-91
- NSAP mapping P3C-81
- split horizon
- DECnet P3C-48
- ISO IGRP, enabling P3C-67
- VINES P3C-19, P3C-20
- SRTP
- starting P3C-15
- static routes
- Apollo Domain P3C-8
- DECnet P3C-40, P3C-42
- ISO CLNS P3C-64
- controlling the source NET P3C-80
- example P3C-108
- interdomain (example) P3C-110
- intradomain (example) P3C-109
- static routing (table) P3C-62
- table entries P3C-63
- VINES P3C-22
- XNS P3C-122
- subinterface configuration mode
- summary xviii
- subnetwork number
- VINES P3C-14
- subnetwork point of attachment
- See SNPA
- system ID
- IS-IS P3C-60, P3C-61
- ISO GRP P3C-64
- ISO IGRP P3C-60
- NSAPs, Level 1 routing P3C-60
- system routing
- IS-IS P3C-64
- ISO IGRP P3C-64
T
- Tab key
- command completion xix
- target identifier
- See TARP, TID
- Target Identifier Address Resolution Protocol
- See TARP
- TARP
- address mapping P3C-95
- adjacencies P3C-96
- configuration examples P3C-113
- configuration task list P3C-94
- configuring P3C-93
- enabling P3C-95
- maintaining P3C-98
- NSAP addresses
- determining P3C-97
- multiple P3C-96
- n-selector P3C-98
- PDU
- propagation P3C-95
- types P3C-93
- protocol type P3C-98
- sequence number P3C-98
- TID
- configuring P3C-95
- definition P3C-93
- determining P3C-97
- timers, configuring P3C-97
- update remote cache bit P3C-98
- tarp allow-caching command P3C-95
- tarp arp-request-timer command P3C-98
- tarp blacklist-adjacency command P3C-97
- tarp cache-timer command P3C-98
- tarp command P3C-98
- tarp enable command P3C-95
- tarp global-propagate command P3C-96
- tarp ldb-timer command P3C-98
- tarp lifetime command P3C-98
- tarp map command P3C-96
- tarp originate command P3C-96
- tarp post-t2-response-timer command P3C-98
- tarp propagate command P3C-96
- tarp query command P3C-97
- tarp resolve command P3C-97
- tarp route-static command P3C-96
- tarp run command P3C-95
- tarp sequence-number command P3C-98
- tarp t1-response-timer command P3C-97
- tarp t2-response-timer command P3C-97
- tarp tid command P3C-95
- tarp urc command P3C-98
- timers
- DECnet
- broadcast routing, adjusting P3C-48
- hello, adjusting P3C-47
- ISO IGRP, adjusting P3C-67
- TARP, configuring P3C-97
- XNS update timers P3C-122
- timers basic command P3C-67
- Token Ring
- DECnet
- configuring P3C-35
- encapsulation P3C-35
- trace command
- ISO CLNS
- user P3C-93
- VINES P3C-24
U
- Ungermann-Bass Net/One
- See Net/One
- user EXEC mode
- summary xviii
V
- VINES
- access control P3C-16
- access lists
- applying to interface P3C-17
- configuration (example) P3C-27
- creating P3C-17
- displaying P3C-24
- extended P3C-16
- simple P3C-16
- standard P3C-16
- types P3C-16
- addresses
- base of host addresses P3C-19
- format P3C-13
- host names, assigning to P3C-18
- application layer support P3C-24
- broadcasts
- encapsulation P3C-18
- forwarding P3C-23
- serverless networks P3C-16
- Cisco's implementation P3C-2
- class field P3C-23
- configuration
- (examples) P3C-24 to P3C-29
- tasks P3C-14
- encapsulation P3C-18
- fast switching
- deleting P3C-23
- disabling P3C-21
- displaying P3C-24
- filters
- applying to interface P3C-17
- configuration (example) P3C-27
- types P3C-16
- floating static routes P3C-22
- hello message P3C-19
- hop count field P3C-23
- host
- names, assigning to addresses P3C-18
- name table, displaying entries P3C-24
- number P3C-13
- interfaces, status P3C-24
- IPC connections, displaying information P3C-24
- IP header P3C-23
- load sharing P3C-20
- logical network (figure) P3C-13
- MAC-level echo P3C-2
- metrics, routing P3C-2, P3C-15
- monitoring tasks P3C-23
- name-to-address mapping P3C-2
- neighbor stations P3C-22, P3C-23, P3C-24
- network connectivity, testing P3C-24
- network number P3C-13
- NTP P3C-21
- over WANs P3C-23
- redetermine router's network address P3C-24
- routing
- concurrent routing and bridging P3C-15
- enabling (example) P3C-24
- enabling on interface P3C-15
- flash updates P3C-20
- serverless networks (examples) P3C-25
- table P3C-23, P3C-24
- updates P3C-19, P3C-20
- RTP
- determining best path P3C-22
- redirect messages P3C-20
- starting P3C-14
- serverless networks P3C-16
- server number P3C-13
- single route P3C-21
- split horizon P3C-19, P3C-20
- SRTP, starting P3C-15
- static paths P3C-22
- static routes P3C-22
- subnetwork number P3C-14
- time
- accepting updates P3C-21
- configuration (example) P3C-29
- NTP P3C-21
- sending updates P3C-21
- synchronizing P3C-21
- tracing packet path P3C-24
- traffic statistics P3C-23, P3C-24
- vines access-group command P3C-17
- vines access-list command P3C-17
- vines decimal command P3C-19
- vines encapsulation command P3C-18
- vines enhancements command P3C-20
- vines host command P3C-18
- vines metric command P3C-15
- vines neighbor command P3C-22
- vines propagate command P3C-23
- vines redirect command P3C-19, P3C-20
- vines route-cache command P3C-21
- vines route command P3C-22
- vines routing command P3C-14, P3C-15, P3C-24
- vines single-route command P3C-21
- vines split-horizon command P3C-20
- vines srtp-enabled command P3C-15
- vines time access-group command P3C-21
- vines time destination command P3C-21
- vines time participate command P3C-21
- vines time services command P3C-21
- vines time set-system command P3C-21
- vines time use-system command P3C-21
- vines update deltas command P3C-19
- vines update interval command P3C-19
- Virtual Network System
- See VINES
W
- WANs
- configuring
- ISO CLNS over P3C-88
- DECnet support P3C-3
- which-route command P3C-93
X
- X.25
- configuring NSAP-to-X.25 address mapping for ISO CLNS P3C-88
- DECnet support P3C-3
- encapsulating ISO CLNS P3C-4
- Xerox Network Systems
- See XNS
- XNS
- access control P3C-118 to P3C-121
- access lists
- 3Com (example) P3C-128
- creating P3C-120, P3C-121
- extended P3C-119
- filters P3C-120
- standard P3C-118
- addresses P3C-116
- broadcasts
- all-nets broadcast P3C-123
- directed broadcast P3C-123
- flooding P3C-124, P3C-125
- forwarding P3C-124, P3C-125
- local broadcast P3C-123
- messages, controlling P3C-123
- processing P3C-124
- Cisco's implementation P3C-4
- concurrent routing and bridging P3C-118
- configuration
- (examples) P3C-127 to P3C-130
- tasks P3C-117
- encapsulation on Token Ring interfaces P3C-118
- fast switching P3C-126
- cache entries, displaying P3C-127
- filters
- applying to interface P3C-121
- generic P3C-119, P3C-120
- routing table P3C-119, P3C-121
- types (table) P3C-119
- flooding P3C-124
- behavior, defining P3C-125
- configuring P3C-125
- helpering P3C-124
- configuring P3C-125
- example P3C-129
- host number P3C-116, P3C-124
- interfaces, displaying status P3C-127
- metrics, routing P3C-4, P3C-116
- monitoring tasks P3C-127
- Net/One routing
- emulation mode P3C-116
- enabling (example) P3C-128
- task list P3C-118
- network
- connectivity, testing P3C-127
- monitoring P3C-127
- number P3C-116
- network connectivity, testing P3C-127
- paths, setting maximum P3C-123
- RIP updates
- delay between P3C-122
- Net/One routers P3C-115
- receiving P3C-116, P3C-118
- setting timers P3C-122
- timers (example) P3C-129
- routing
- enabling P3C-118
- over LANs P3C-4
- over WANs P3C-4
- routing table entries
- adding P3C-121
- displaying P3C-127
- standard routing, enabling
- (example) P3C-127
- commands P3C-117
- static routes, adding to routing table P3C-122
- Token Ring interface encapsulation P3C-118
- traffic statistics, displaying P3C-127
- xns access-group command P3C-119, P3C-121
- xns encapsulation command P3C-118
- xns flood broadcast allnets command P3C-126
- xns flood broadcast net-zero command P3C-126
- xns flood specific allnets command P3C-126
- xns forward-protocol command P3C-125
- xns hear-rip command P3C-118
- xns helper-address command P3C-124
- xns input-network-filter command P3C-119, P3C-121
- xns maximum-paths command P3C-123
- xns network command P3C-117
- xns output-network-filter command P3C-119, P3C-121
- xns route-cache command P3C-126
- xns route command P3C-122
- xns router-filter command P3C-119, P3C-121
- xns routing command P3C-117
- xns ub-emulation command P3C-118
- xns update-time command P3C-122
Copyright 1989-2000
©
Cisco Systems Inc.
