Dialer Profiles Backup Commands

This chapter describes the function and displays the syntax for Dialer Profiles commands. For more information about defaults and usage guidelines, see the corresponding chapter of the Dial Solutions Command Reference.

backup interface dialer

To configure a dialer interface as a secondary or dial backup, use the backup interface dialer interface configuration command. To disable this feature, use the no form of this command.

number	Dialer interface number to use as the backup interface.

backup interface dialer number
no backup interface dialer number

number

Dialer interface number to use as the backup interface.

backup load

To set a traffic load threshold for dial backup service, use the backup load interface configuration command. To return to the default value, use the no form of this command.

enable-threshold	Percentage of the primary line's available bandwidth that the traffic load must exceed to enable dial backup.
never	Sets the secondary line never to be activated due to traffic load.
disable-load	Percentage of the primary line's available bandwidth that the traffic load must be less than to disable dial backup.

backup load {enable-threshold | never} {disable-load | never}
no backup load {enable-threshold | never} {disable-load | never}

enable-threshold

Percentage of the primary line's available bandwidth that the traffic load must exceed to enable dial backup.

never

Sets the secondary line never to be activated due to traffic load.

disable-load

Percentage of the primary line's available bandwidth that the traffic load must be less than to disable dial backup.

Table of Contents