|
|
This chapter describes the function and displays the syntax for ISDN caller ID callback commands. For more information about defaults and usage guidelines, see the corresponding chapter of the Dial Solutions Command Reference.
To configure caller ID screening and optionally to enable ISDN caller ID callback for legacy DDR or the dialer profiles DDR feature, use the dialer caller interface configuration command. To disable this feature, use the no form of this command.
dialer caller number [callback]
number | Remote telephone number for which to screen. Use a letter X to represent a single "don't care" digit. The maximum length of each number is 25 characters. |
callback | (Optional) Enables callback. |
To configure ISDN caller ID screening and optionally to enable ISDN caller ID callback for legacy DDR, use the isdn caller interface configuration command. To disable this feature, use the no form of this command.
isdn caller phone-number [callback]
phone-number | Remote telephone number for which to screen. Use a letter X to represent a single "don't care" digit. The maximum length of each number is 25 characters. |
callback | (Optional) Enables callback. |
Posted: Mon Feb 8 13:39:57 PST 1999
Copyright 1989-1999©Cisco Systems Inc.