Cisco IOS Release 12.0 Command Reference Master Index

Command Reference Master Index
Symbols
Numerics
A
B
C
D
E
F
G
H
I
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Z

Command Reference Master Index

This master index lists topics and commands found in the Cisco IOS Release 12.0 Command References.

To access one of these topics or commands, click on the page number following the topic.

Symbols

! character

: ping command output FR-524

# character

: privileged EXEC mode prompt FR-8

$ character in regular expressions DR-905

* character in regular expressions DR-904

+ character in regular expressions DR-904

. character

: ping command output FR-524

/etc/printcap file

: modifying for printing FR-80

> prompt FR-299

? character in regular expressions DR-904

? command FR-xvii

^ character in regular expressions DR-905

_ character in regular expressions DR-906

Numerics

100VG AnyLAN port adapter

: configuring IR-118
: displaying information IR-234, IR-325

7-bit character set

: changing for session FR-105
: for standard U.S. characters FR-105

8-bit character set

EXEC and configuration commands

: changing for a session FR-94
: setting default value FR-62
: setting for line FR-69

hardware databits

: changing for session FR-88
: configuring on a line FR-60

software character bits

: changing for session FR-89
: setting for line FR-61

special character width

: changing for session FR-105
: configuring default FR-63
: configuring for line FR-84

90-compatible OUI form BR-60, BR-99

A

aaa accounting command SR-64

aaa accounting suppress null-username command SR-67

aaa accounting update command SR-68

aaa accounting update periodic command

network congestion

: (caution) SR-68

aaa authentication arap command SR-4

aaa authentication banner command SR-6

aaa authentication enable default command SR-8

aaa authentication fail-message command SR-10

aaa authentication local-override command SR-12

aaa authentication login command SR-13

aaa authentication nasi command SR-15

aaa authentication password-prompt command SR-17

aaa authentication ppp command SR-18

aaa authentication username-prompt command SR-20

aaa authorization command SR-52

aaa authorization config-commands command SR-55

aaa authorization reverse-access command SR-56

AAA configuration

: virtual profiles, use with DR-777

aaa nas-port extended command SR-80

aaa new-model command SR-21, SR-59

aaa processes command SR-22

AAA/TACACS+

: arap authentication DR-646
: enable login authentication DR-177

AAL

: displaying WR-99, WR-105, WR-111

AAL3/4

ATM

: (example) WR-4
: enabling WR-4

AAL5 NLPID WR-106, WR-112, WR-122

abbreviating commands

: context-sensitive help FR-xvii
: software recognition FR-3

ABR

configuring

: (example) WR-3

rate-factor

: (example) WR-5
: configuration WR-5

abr command WR-2

absolute line number DR-21

absolute-timeout command DR-172, FR-76

accept reverse charging

: X.25 WR-329

accept-lifetime command P1R-470

access control

AppleTalk

: access group P2R-21
: distribute list P2R-37, P2R-39
: zone filter P2R-55
: zones P2R-2

ARA DR-649, DR-650, DR-657

DECnet P3R-132, P3R-144

IPX P2R-216, P2R-246

LAT

: assigning names to group lists DR-387
: connections DR-364
: defining a group list DR-393
: specifying access conditions to nodes DR-384

VINES P3R-57 -P3R-59

XNS

: extended P3R-356
: standard P3R-359

access expressions, configuring BR-90

access groups

: DECnet P3R-115
: IP P1R-139

access list command

with regular expressions DR-902

: (example) DR-907

access list violations

: accounting P1R-143
: displaying P1R-171
: displaying (example) P1R-172
: logging P1R-115, P1R-121, P1R-129, P1R-133, P1R-143, P1R-166

access lists

Apollo Domain

: applying to an interface P3R-2
: creating P3R-3

AppleTalk

: displaying P2R-112
: network numbers
: cable range P2R-4
: creating P2R-11
: including P2R-6
: interfaces P2R-21
: other access P2R-13
: within P2R-17
: zones, creating P2R-2, P2R-19

bridging (table) BR-923

contents of QR-51

DDR

: dialing, controlling DR-665, DR-693, DR-721
: types and numbers, supported (table) DR-665, DR-693, DR-721

DECnet

: extended P3R-104
: filter connect initiate packets P3R-106
: standard P3R-110

dynamic

: temporary entries, clearing manually SR-144

Ethernet type codes (table) BR-923

IBM NetBIOS

: byte offset BR-190

: applying on inbound or outbound interfaces P1R-139
: BGP access list filters P1R-387, P1R-402
: extended P1R-112 -P1R-120, P1R-143
: logging message P1R-129, P1R-133, P1R-166
: named P1R-141
: setting on virtual terminal lines P1R-110
: standard P1R-121 -P1R-122
: violations, accounting for P1R-143
: violations, logging P1R-115, P1R-129, P1R-133, P1R-143, P1R-166

IP violations, logging P1R-121

IPX

: extended P2R-206
: named P2R-248
: NetBIOS P2R-298, P2R-300, P2R-397
: NLSP route aggregation P2R-210
: routing table filtering P2R-283
: SAP P2R-213
: standard P2R-216

LSAP

: using in access expressions BR-90

netbios-host BR-90

rate limit statistics (table) QR-54

rate-limited QR-53

SNAP type

: using in access expressions BR-90

SRB

: Ethernet type codes (table) BR-923
: filtering by protocol type BR-92

traffic shaping based on QR-87

transparent bridging

: assigning to bridge group BR-28
: assigning to interface BR-24, BR-28
: associating with interface and bridge group BR-36

access lists (continued)

: filtering MAC addresses BR-31
: qualifications for using BR-3

VINES

: displaying P3R-26
: extended P3R-54
: simple P3R-57
: standard P3R-59

violations

: displaying SR-148
: (example) SR-149

XNS

: extended P3R-356
: standard P3R-359

B

B8ZS line coding IR-355

backup delay command DR-740

backup interface

: Dialer Profiles DR-747

backup interface command DR-741, DR-748

backup load command DR-742, DR-750

backup server table

: IPX Enhanced IGRP P2R-256

backup-dlus command

: APPN control point BR-594
: APPN link station BR-595

backward explicit congestion notification

: See BECN

bandwidth

: setting DR-236, IR-19

Bandwidth Allocation Control Protocol

: See PPP, BACP DR-781

bandwidth command DR-236, IR-19

bandwidth on demand, DDR DR-695

banner exec command FR-122

banner incoming command FR-124

banner login command FR-126

banner motd command FR-127

banners

: disabling on a line FR-122, FR-126, FR-136
: enabling on a line FR-122, FR-126, FR-136
: EXEC, displaying FR-122
: for reverse Telnet lines FR-124
: incoming message FR-124
: line number FR-141
: login FR-126
: MOTD FR-127
: using to announce system shutdown FR-127
: See also messages

Banyan VINES

: See VINES

baud rate

: receive, changing for session FR-104
: receive, configuring for a line DR-180
: transmit and receive, configuring for a line DR-187
: transmit, configuring for a line DR-195
: X.3 PAD parameters DR-896
: See also line speed

Bc, committed burst size, Frame Relay WR-172

Be, excess burst size, Frame Relay WR-174

BECN

: bits WR-246
: message generation QR-85

BFE

address translation WR-285, WR-318

Blacker Emergency Mode

: entering WR-285
: leaving WR-285

local marker facilities (table) WR-405

mapping algorithm WR-318

remote-red setting WR-374

X.25 encapsulation WR-292

bfe command WR-285

BGP

administrative distance, setting P1R-385

aggregate address, configuring P1R-366

autonomous system path P1R-428

backdoor routes, indicating P1R-425

community attribute

: sending to a neighbor P1R-417
: setting P1R-430

community list, creating P1R-389

community, matching P1R-393

confederation P1R-372

display routes

: allowed by a community list P1R-447
: of communities P1R-445

enabling P1R-427

filtering packets and routing information DR-902

IP access (example) DR-907

local preference value, setting P1R-536

metric type P1R-434

networks, specifying P1R-424

route dampening

: configuring factors P1R-374
: dampened routes, displaying P1R-449
: dampening information, clearing P1R-380
: enabling P1R-374
: flap statistics, clearing P1R-381
: flap statistics, displaying P1R-452
: setting with a route-map P1R-432
: suppressed routes, unsuppressing P1R-380

route filtering P1R-387, P1R-402

route map P1R-517

route reflector, configuring P1R-370, P1R-371, P1R-415

route summarization P1R-202, P1R-304, P1R-368

routing domain confederation P1R-372

sessions, resetting immediately P1R-377

soft reconfiguration P1R-378, P1R-418

synchronization with IGPs P1R-465

TCP MD5 authentication P1R-407

timers, adjusting P1R-467

bgp always-compare-med command P1R-369

bgp client-to-client reflection command P1R-370

bgp cluster-id command P1R-371

bgp confederation identifier command P1R-372

bgp confederation peers command P1R-373

bgp dampening command P1R-374

bgp default local-preference command P1R-376

bgp fast-external-fallover command P1R-377

bgp-policy command QR-4

Binary Synchronous Communications

: See Bisync

Bisync

: bsc dial-contention command BR-310
: character set BR-308
: contention interfaces BR-309
: number of poll-list cycles BR-317
: poll timeout BR-313
: polling cycle interval BR-312
: primary end of link BR-314
: retries for a device BR-315
: secondary end of link BR-316
: specific polls BR-318

Bisync enhancements

: bsc contention command BR-309

Blacker Emergency Mode WR-333

: address translation WR-285
: entering WR-285
: leaving WR-285

Blacker Front End

: See BFE

Block Serial Tunneling

: See BSTUN

boot bootldr command FR-302

boot bootstrap command FR-304

boot buffersize command FR-209

boot command FR-298

boot config command FR-210

BOOT environment variable

: rearranging order of entries FR-308
: specifying FR-306, FR-309

boot field

: bit settings, listing FR-316
: default values, changing FR-311, FR-313

boot flash command FR-298

boot host command FR-212

boot network command FR-214

boot register FR-311, FR-313

boot system command FR-306, FR-307

booting

from Flash FR-306

: checksum values, MOP FR-271

from network server FR-298

: (example) FR-300

manually from Flash FR-298

system software, configuration register FR-311, FR-313

BOOTLDR environment variable, specifying FR-302

BOOTP

: forwarding agent P1R-27, P1R-32

bootstrap image

: backing up on a server FR-270
: secondary FR-304

Border Gateway Protocol

: See BGP

Break key FR-309

Break key, use in login string DR-415

Break signals DR-895

: generating DR-462
: X.3, action upon receipt of DR-895

bridge acquire command BR-8

bridge address command BR-9

bridge bridge command BR-11

bridge circuit-group pause command BR-12

bridge circuit-group source-based command BR-13

bridge cmf command BR-14

bridge crb command BR-15, P1R-15

bridge domain command BR-16

bridge forwarding database, viewing classes of entries BR-65

bridge forward-time command BR-18

bridge group command P1R-15

bridge groups, assigning interface to BR-13, BR-19, BR-23

bridge hello-time command BR-44

bridge irb command BR-45

bridge lat-service-filtering command BR-46

bridge max-age command BR-47

bridge multicast-source command BR-48

bridge priority command BR-49

bridge protocol command BR-50

bridge protocol data units

: intervals between hello BR-44

bridge protocol ibm command BR-94

bridge route command BR-51

bridge-group aging-time command BR-20

bridge-group cbus-bridging command BR-21

bridge-group circuit-group command BR-23

bridge-group command BR-19

bridge-group input-address-list command BR-24

bridge-group input-lat-service-deny command BR-25

bridge-group input-lat-service-permit command BR-26

bridge-group input-lsap-list command BR-27

bridge-group input-pattern-list command BR-28

bridge-group input-type-list command BR-29

bridge-group lat-compression command BR-30

bridge-group output-address-list command BR-31

bridge-group output-lat-service-deny command BR-32

bridge-group output-lat-service-permit command BR-33

bridge-group output-lsap-list command BR-34

bridge-group output-pattern-list command BR-36

bridge-group output-type-list command BR-37

bridge-group path-cost command BR-38

bridge-group priority command BR-39

bridge-group spanning-disabled command BR-40

bridge-group sse command BR-42

bridge-group virtual interface (BVI) BR-63

bridges

displaying

: all global information BR-151
: logical configuration BR-152

bridging

: X.25 WR-355

broadcast command WR-45

broadcasts

: and transparent bridging spanning-tree protocol P1R-29
: flooding P1R-29

IPX

: forwarding P2R-276
: type 20 packets P2R-381, P2R-382, P2R-383

VINES

: forwarding P3R-78
: serverless networks P3R-86
: zero-hop P3R-86

XNS

: all-nets P3R-374
: flooding P3R-374, P3R-375, P3R-376
: in 3Com environment P3R-375
: forwarding P3R-377, P3R-380

BSC

Bisync enhancements

: contention BR-310

bsc contention command BR-309

bsc dial-contention command BR-310

contention interfaces BR-309

bsc contention command BR-309

bsc dial-contention command BR-310

bsc host-timeout command BR-311

bsc pause command BR-312

bsc poll-timeout command BR-313

bsc primary command BR-314

bsc retries command BR-315

bsc secondary command BR-316

bsc servlim command BR-317

bsc spec-poll command BR-318

bsc-char-set command BR-308

BSTUN

custom queuing

: BSTUN header BR-344
: TCP port BR-346

frames, specifying BR-326

group, specifying BR-319

interface

: enabling BR-329

over Frame Relay

: bstun lisnsap command BR-321
: bstun route command BR-328
: frame-relay map bstun command BR-332
: frame-relay map llc2 command BR-333
: frames, specifying BR-328

peers, specifying BR-322

protocol group, specifying BR-323

bstun group command BR-319

bstun keepalive-count command BR-320

bstun lisnsap command BR-321

bstun peer-name command BR-322

bstun protocol-group command BR-323

bstun route (Frame Relay) command BR-328

bstun route command BR-326, BR-328

buckets-of-history-kept command FR-366

buffer-percent command BR-596

buffers

character, for terminal sessions FR-65, FR-67

command history

: changing for session FR-44
: setting for a line FR-15

configuration file, changing size FR-209

interface buffer pool tuning FR-614

management parameters FR-613, FR-615

message logging to internal FR-506

public buffer pool tuning FR-614

receive

: (example) WR-36
: configuring WR-36

size, setting FR-613, FR-615

statistics, displaying FR-664

transmit

: (example) WR-41
: configuring WR-41

XRemote, changing size of DR-493

buffers command FR-613

buffers huge size command FR-615

burned-in address WR-307

busy-message command DR-366, FR-129

C

cable arp command VR-204

cable channel-change command VR-205

cable downstream annex command VR-206

cable downstream frequency command VR-207

cable downstream if-output command VR-208

cable downstream interleave-depth command VR-209

cable downstream modulation command VR-210

cable downstream symbol-rate command VR-211

cable insertion-interval command VR-212

cable ip-broadcast-echo command VR-214

cable ip-multicast-echo command VR-213

cable length, T3 IR-20

cable privacy kek grace-time command VR-215

cable privacy kek life-time command VR-216

cable privacy tek grace-time command VR-217

cable privacy tek life-time command VR-218

cable proxy-arp command VR-219

cable shared-secret command VR-220

cable source-verify command VR-225

cable spectrum-group command VR-221

cable spectrum-group frequency command VR-223

cable upstream fec command VR-226

cable upstream frequency command VR-227

cable upstream power-level command VR-228

cable upstream scramble command VR-230

cable upstream shutdown command VR-231

cablelength command IR-20

cablelength long command IR-21, VR-10

cablelength short command IR-23, VR-12

ca-identity mode

: enabling SR-377

calendar set command FR-616

call user data

: See CUD

callback

: ARA DR-812
: ARA protocol chat scripts DR-815
: dialer interface, non-DTR DR-809
: enabling for PPP client DR-814
: enabling on interface DR-807
: enabling on the EXEC DR-818
: exec chat scripts DR-817
: forcing a waiting period DR-813
: PPP, client or server DR-809
: secure DR-806

callback forced-wait command DR-813

called-number command DR-64

caller ID screening DR-820

: configuring DR-202, DR-295, DR-822
: platform support DR-202, DR-295, DR-822

CAP

: compatibility P2R-59

CAR

: access lists QR-2
: interface statistics (table) QR-62
: policies, configuring QR-46

carrier wait time

DDR

: interface disabling DR-707
: map class DR-730

CAs

authenticating SR-368

: (example) SR-368

CEP

: support SR-389

configuration

: (example) SR-388

declaring SR-377, SR-388

: (example) SR-377, SR-388

enrolling SR-374

identity

: deleting SR-377

LDAP

: support SR-389
: support (example) SR-389

locations

: specifying SR-388

public keys SR-368

URLs

: specifying SR-388

See also Certification Authority Interoperability

cas-custom command DR-259

cas-group (controller e1) command DR-265

cas-group command DR-269, IR-24

caution, description VR-230

Cayman tunneling

: AppleTalk IR-372, P1R-107, P2R-201

CBAC

application-layer protocols

: configuring SR-188

audit trail messages

: (example) SR-178
: enabling SR-178

configurations

: viewing SR-204

denial-of-service attacks

: detection SR-198

disabling SR-203

H.323 inspection

: configuring SR-188

half-open sessions

: deleting, high threshold SR-182, SR-191
: deleting, low threshold SR-184, SR-193
: description SR-182
: TCP threshold SR-198

inspection rules

: applying SR-180
: applying (example) SR-180
: defining SR-186
: removing SR-180
: viewing SR-204

Java

: blocking SR-186
: blocking (caution) SR-188
: inspection, configuring SR-188

RPC inspection

: configuring SR-189

session information

: (example) SR-204
: viewing SR-204

SMTP inspection

: configuring SR-189

TCP inspection

: configuring SR-187

timeouts

: DNS idle, specifying SR-179
: FIN-exchange, specifying SR-195
: overriding SR-189
: synwait, specifying SR-200

CBAC (continued)

: TCP idle, specifying SR-196
: UDP idle, specifying SR-201

UDP inspection

: configuring SR-187

cbr VR-190

CCL scripts, using modified and unmodified together DR-621

CCO

: accessing vi
: definition vi

cd command FR-170

CDP

enabling and disabling for routing device FR-370

enabling on an interface FR-368

global information, displaying FR-404

interface status information, displaying FR-407

neighbor

: information, displaying FR-408
: table, clearing FR-373

neighbor device, displaying information FR-405

traffic counters, clearing FR-372

traffic information, displaying FR-410

transmission hold time, configuring FR-369

transmission timer, setting FR-371

cdp enable command FR-368

cdp holdtime command FR-369

cdp run command FR-370

cdp timer command FR-371

CEF

: interface, enabling XR-31

central resource registration

: disabling BR-597

central-resource-registration command BR-597

CEP

: specifying SR-389

certificate chain configuration mode

: enabling SR-370

certificate command SR-364

certificate enrollment protocol

: See CEP

certificates

accepting SR-366

: (example) SR-366

adding SR-364

deleting SR-364, SR-370

: (example) SR-364, SR-370

requesting SR-374

: (example) SR-375

requests

: resending (example) SR-385, SR-387
: resending, number of times SR-385
: resending, wait period SR-387

retrieving SR-372

: (example) SR-372

revoking SR-374

storing SR-372

viewing SR-390

: (example) SR-390 -SR-391

Certification Authority Interoperability

CA authentication SR-368

CEP

: specifying SR-389

challenge password SR-374

description SR-363

LDAP support

: specifying SR-389

NVRAM memory usage SR-372

See also CAs; certificates; CRLs; RSA keys

ces aal1 clock command WR-47

ces aal1 service command WR-48

ces cell-loss-integration-period command VR-191

ces circuit command WR-50

ces clockmode synchronous command VR-192

ces connect command VR-193

ces dsx1 clock source command WR-53

ces dsx1 framing command WR-54

ces dsx1 lbo command WR-56

ces dsx1 linecode command WR-57

ces dsx1 loopback command WR-58

ces dsx1 signalmode robbedbit command WR-59

ces initial-delay command VR-195

ces max-buf-size command VR-196

ces partial-fill command VR-197

ces pvc command WR-60

ces service command VR-198

CGMP

: clearing P1R-568
: enabling P1R-578
: proxy P1R-578

Challenge Handshake Authentication Protocol

: See CHAP

Channel Interface Processor

: See CMCC adapters

Channel Port Adapter

: See CMCC adapters

channel service unit/data service unit

: See CSU/DSU

channel-associated signaling (CAS) WR-51

channel-group (Fast EtherChannel) command IR-26

channel-group command DR-273, VR-13

channelized E1

channel groups DR-273

controller, statistics DR-279, DR-317

loopback

: local, interface DR-310

channelized T1

channel groups DR-273

controller

: descriptive name DR-284

channelized T1 (continued)

loopback IR-146, IR-147

: local, entire line DR-309
: local, interface DR-310
: remote, interface DR-312

channelized T3 IR-54, IR-359

Channelized T3 Interface Processor (CT3IP)

: See T3

channel-protocol command BR-744

channels

ATM

: maximum, configuring (example) WR-21

CHAP

: authentication method DR-590
: rotary, common alias for routers DR-596
: username and password, specifying DR-615
: using with DDR DR-700

character data bits

: changing for session FR-89
: setting for line FR-61

character mapping

: creating DR-472
: determining DR-450
: displaying DR-451

character padding

: changing for session FR-101
: configuring for line FR-78

character set

: See 7-bit character set; 8-bit character set

character width

EXEC process

: changing for session FR-94
: configuring for a line FR-69
: defining default FR-62

special characters

: changing for session FR-105
: configuring for line FR-84
: defining default FR-63

characters in regular expressions

: $ character DR-903
: * character DR-903
: + character DR-903
: . character DR-903
: ? character DR-903
: ^ character DR-903
: _ character DR-903

chat scripts

ARA protocol-callback DR-815

backward compatibility, SLIP and PPP DR-637

DDR DR-672

escape sequences

: (table) DR-669

example DR-907

EXEC callback DR-817

expect-send pairs

: sample (table) DR-670

naming conventions DR-668, DR-672

physical terminal lines, using on DR-38, DR-815, DR-817

starting

: because of incoming connections DR-40
: from the EXEC DR-60
: manually for a line DR-60
: on line activation DR-38
: on line reset DR-42
: on system startup DR-44

writing DR-668

chat-script command DR-668

regular expressions

: (example) DR-907

checksums

: AppleTalk P2R-33
: ISO CLNS P3R-198
: system images, verifying FR-271

chunk size, configuring IP DR-373

CIP

: See CMCC adapters

CIPX DR-630

circuit emulation services (CES)

: cable length WR-56
: CBR information WR-136
: channel-associated signaling (CAS) WR-51
: ciruit information WR-126
: clocking WR-47, WR-53
: clocking information WR-144
: framing WR-54
: hard PVC WR-60
: interface information WR-129
: line code format WR-57
: loopback WR-58
: on-hook detection WR-51
: robbed bit signaling WR-59
: status information WR-124, WR-132
: structured services WR-51
: unstructured services WR-51

Cisco 2520 through 2523 routers

: low-speed serial interfaces, physical layer DR-35

Cisco 4500 Series

: ATM loopback, OC3, DS3, E3 interfaces WR-77

Cisco Connection Online

: See CCO

Cisco Discovery Protocol

: See CDP

Cisco IOS

: saving configuration changes FR-xxii

ciscoBus II, enabling autonomous bridging on BR-21

Cisco-supported RFCs

: (table) FR-737

class command WR-62

: map-list configuration WR-164
: virtual circuit configuration WR-166

class-of-service command BR-598

claw (backup) command BR-748

claw command BR-745

clear access-list counters command P1R-123

clear access-template command SR-147

clear adjacency command XR-22

clear alps circuits command BR-912

clear alps counters command BR-913

clear appletalk arp command P2R-102

clear appletalk neighbor command P2R-103

clear appletalk route command P2R-104

clear appletalk traffic command P2R-105

clear arp-cache command P1R-8

clear atm vc command XR-124

clear bridge command BR-54

clear bridge multicast command BR-55

clear card-message command FR-235

clear cdp counters command FR-372

clear cdp table command FR-373

clear cef linecard command XR-23

clear clns cache command P3R-187

clear clns es-neighbors command P3R-188

clear clns is-neighbors command P3R-189

clear clns neighbors command P3R-190

clear clns route command P3R-191

clear controller command DR-275

clear controller lex command IR-28

clear counters command IR-30

clear counters line command DR-68

clear crypto connection command SR-219

clear crypto isakmp command SR-399

clear crypto sa command SR-316

clear dbconn connection command BR-716

clear decnet accounting command P3R-112

clear decnet counters command P3R-114

clear dialer command DR-676, DR-682

clear dlsw circuit command BR-238

clear dlsw reachability command BR-239

clear dlsw statistics command BR-240

clear drip command BR-200

clear entry command DR-367

clear frame-relay-inarp command WR-168

clear host command P1R-9

clear hub command IR-32

clear hub counters command IR-33

clear interface command IR-34

clear interface fastethernet command IR-36

clear ip accounting checkpoint command P1R-124

clear ip bgp command P1R-378

clear ip bgp dampening command P1R-380

clear ip bgp flap-statistics command P1R-381

clear ip bgp peer-group command P1R-382

clear ip cef command XR-24

clear ip cgmp command P1R-568

clear ip drp command P1R-125

clear ip dvmrp route command P1R-569

clear ip eigrp neighbors command P1R-305, P1R-569

clear ip flow stats command XR-2

clear ip igmp group command P1R-570

clear ip mds forwarding command XR-106

clear ip mroute command P1R-571

clear ip nat translation command P1R-10

clear ip nhrp command P1R-12

clear ip pim auto-rp command P1R-572

clear ip pim interface count command XR-107

clear ip route command P1R-13, P1R-472

clear ip rtp header-compression command P1R-573

clear ip sdr command P1R-574

clear ip sse command P1R-126

clear ip trigger-authentication command SR-27

clear ip wccp command FR-148

clear ipx accounting command P2R-221

clear ipx cache command P2R-223

clear ipx nhrp command P2R-224

clear ipx nlsp neighbors command P2R-225

clear ipx route command P2R-227

clear kerberos creds command SR-120

clear lane le-arp command XR-125

clear lane server command XR-127

clear line EXEC command DR-12

clear logging command FR-492

clear modem command DR-70, DR-72

clear modempool-counters command DR-74

clear mpoa client cache command XR-181

clear mpoa server cache command XR-182

clear ncia circuit command BR-728

clear ncia client command BR-729

clear ncia client registered command BR-730

clear netbios-cache command BR-95

clear rif-cache command BR-96, IR-37

clear service-module serial command IR-38

clear smrp mcache command P2R-107

clear snapshot quiet-time command DR-826

clear source-bridge command BR-97

clear sse command BR-56, BR-98

clear tarp counters command P3R-192

clear tarp ldb-table command P3R-193

clear tarp tid-table command P3R-194

clear tcp command FR-130

clear tcp statistics command P1R-126

clear vines cache command P3R-20

clear vines ipc command P3R-21

clear vines neighbor command P3R-22

clear vines route command P3R-23

clear vines traffic command P3R-24

clear vlan statistics command BR-57

clear voice port command VR-14

clear vpdn history failure command DR-836

clear vpdn tunnel command DR-837

clear x25 command WR-286

clear x25-vc command

: See clear x25 command

clear xot command WR-288

client (lu limit) command BR-752

client (lu nailing) command BR-754

client-atm-address command XR-129

CLNS

: See ISO CLNS

clns access-group command P3R-195

clns adjacency-filter command P3R-197

clns checksum command P3R-198

clns cluster-alias command P3R-199

clns configuration-time command P3R-200

clns congestion-threshold command P3R-201

clns dec-compatible command P3R-202

clns enable command P3R-203

clns erpdu-interval command P3R-204

clns esct-time command P3R-205

clns es-neighbor command P3R-206

clns filter-expr command P3R-207

clns filter-set command P3R-209

clns holding-time command P3R-211

clns host command P3R-212

clns is-neighbor command P3R-214

clns mtu command P3R-215

clns net (global configuration) command P3R-216

clns net (interface configuration) command P3R-217

clns packet-lifetime command P3R-218

clns rdpdu-interval command P3R-219

clns route (interface static route) command P3R-220

clns route (to enter a static route) command P3R-221

clns route default command P3R-223

clns route discard command P3R-224

clns route-cache command P3R-222

clns router isis command P3R-225

clns router iso-igrp command P3R-226

clns routing command P3R-227

clns security-passthrough command P3R-228

clns send-erpdu command P3R-229

clns send-rdpdu command P3R-230

clns split-horizon command P3R-231

clns template-alias command P3R-233

clns want-erpdu command P3R-235

clock

transmit

: (example) WR-9

clock calendar-valid command FR-617

clock rate

: (examples) IR-40

clock rate command DR-237, IR-39

clock rate examples DR-238

clock rate line command VR-15

clock rate network-clock command VR-16

clock read-calendar command FR-618

clock set command FR-619

clock signal

: inverting DR-249, IR-124

clock source

: T1 IR-350
: T3 IR-41

clock source (Cisco AS5200) IR-43

clock source (Cisco MC3810) command IR-44

clock source (controller) command DR-276, IR-45

clock source (interface) command IR-47

clock source command DR-278, IR-41, VR-17

: interface configuration DR-239

clock source line command DR-276

clock summer-time command FR-620

clock ticks

: IPX P2R-268

clock timezone command FR-622

clock update-calendar command FR-623

cluster aliases

: ISO CLNS P3R-199

CMCC adapters

activating

: host link BR-777

assigning

: generic-pool BR-765

backup data paths BR-790

channel-protocol

: defining transmit rate BR-744

CLAW

: configuring BR-745
: display
: connection state BR-822
: packing names BR-822
: packing statistics BR-824

configuring BR-742

: claw (backup) BR-748
: CMCP subchannels BR-756
: CSNA BR-758
: DLUR BR-760
: DLUS backup BR-762
: interfaces BR-748
: internal lan BR-775
: IP host backup
: offload devices BR-788
: LLC connection parameters BR-874
: maximum LUs BR-782
: offload device BR-785, BR-788
: PCA BR-744
: PU entity BR-793
: SNA session switch BR-879
: internal adapter interface BR-879
: TCP port setting BR-873
: TN3270 BR-876

CMCC adapters (continued)

: TN3270 server BR-876, BR-878
: WILL TIMING-MARK BR-877

define

: preferred network node server BR-792

defining

: host link BR-777
: idle-time BR-767

defining interval

: keepalive BR-773

display

: adapters BR-810
: internal lans BR-810

display information

: channel statistics BR-826
: CLAW BR-797
: CMPC
: subchannel information BR-798
: CMPC transmission groups BR-841
: CSNA subchannels BR-801
: interfaces BR-830, BR-868
: IP stack BR-807
: LLC2 sessions BR-820
: offload
: backup groups BR-797
: TCP connections BR-835
: TCP stack BR-838
: TN3270 server
: configuration parameters BR-846, BR-849, BR-855

BR-853

: PU LU BR-862
: UDP listener sockets BR-865
: UDP stack BR-866

enabling

: core dump BR-763

ICMP stack

: display information BR-805

interfaces

: configuring BR-745

internal adapter

: specify name BR-784

IP host backup BR-790

: claw (backup) command BR-748

LLC2

: display
: active connections BR-800
: display parameters BR-812
: specify number BR-781

LSAP, defining

: SNA session switch BR-779

LU sessions

: limiting BR-752

offload device

: configuring BR-785

PU entity

: configuring
: direct connection BR-793
: direct link BR-795

shut down

: internal LAN interface BR-872
: physical interfaces BR-872
: virtual interfaces BR-872

specify

: internal adapter name BR-784
: TCP port setting BR-873

TN3270

: generic-pool command BR-765

CMNS

: enabling WR-289
: LLC2 statistics WR-312
: local X.25 routing on nonserial media WR-289
: restarting WR-286
: traffic statistics, displaying WR-307
: X.25 routing WR-380

cmns enable command WR-289

CMPC

defining

: LLC connection parameters BR-874

cmpc command BR-756

cmt connect command IR-49, IR-50

cmt disconnect command IR-50

codec command VR-19, VR-111

Columbia AppleTalk Package

: See CAP

Combinet devices

: protocols supported DR-288, DR-347

Combinet Proprietary Protocol

: See CPP

comfort-noise command VR-113

command alias

: See aliases

command history

buffer size

: changing for session FR-44
: setting for a line FR-15

displaying previous commands FR-38

recalling commands FR-38

command modes

: exiting FR-10
: global configuration FR-216
: privileged EXEC FR-8
: summary (table) FR-xxi

command syntax

: help FR-13

commands

abbreviating FR-3

ATM WR-1

history

: See command history

commands (continued)

mapping old to new

: (table) FR-335

mapping old to new (table) FR-208, FR-234, FR-263

voice port

: voice confirmation-tone VR-184

committed access rate

: See CAR

Common Command Language (CCL) DR-621

community access string

: setting for SNMP FR-455

compand-type command VR-114

complete sequence number PDU

: See CSNP

compress command DR-240, DR-576, IR-51

compress mppc command DR-576

compress predictor command DR-240, DR-576

compress stac command DR-240, DR-576

compressed system images FR-308

compressing configuration files FR-220

compression

configuring IR-51

HDLC encapsulation IR-52

LABP encapsulation IR-52

LAPB DR-240

MPPC

: ignore-pfc option DR-576

packet-by-packet, X.25 BR-87, BR-469, WR-352

PPP DR-576

PPP encapsulation IR-52

RAND compression algorithm DR-240

specifying for LAT packets BR-30

statistics, displaying IR-194

TCP packet header WR-357

concentrator port

: enabling IR-159

concurrent routing and bridging, enabling BR-15

condition command VR-115

conditional default origination, IS-IS P1R-337

CONFIG_FILE environment variable, specifying FR-210

config-isakmp command mode

: enabling SR-405

config-register command FR-311

configuration file

active, displaying FR-226

buffer, changing size FR-209

copying

: to an rcp server FR-213, FR-215, FR-269, FR-270

host

: default filename FR-222
: loading from a server FR-212, FR-222

network

: default filename FR-222
: loading from a server FR-222

network server, storing FR-271

NVRAM

: displaying file FR-227
: erasing FR-219

storing

: in CONFIG_FILE environment variable FR-272
: in NVRAM FR-272

Configuration Management, FDDI MAC-level connection IR-266

configuration mode

: exiting FR-9

configuration register

: streamlined setup facility FR-49

configuration, saving FR-xxii

configure command FR-216

configure network command

: See copy command

confreg command FR-313

congestion threshold

: DECnet P3R-125
: ISO CLNS P3R-201

connect command DR-368, DR-382, DR-459, SR-121

connect-at-startup command BR-599

connection command VR-117

Connection-Mode Network Service

: See CMNS

connections

displaying open DR-487, DR-565

escaping from DR-417, DR-559

incoming, definition FR-124

LAT DR-382 -DR-383

mobile remote node DR-486

naming FR-138

NASI clients, connecting to DR-754

NetBEUI DR-55

: enabling DR-34

notification of pending output DR-416, FR-77

PPP DR-635

refusing full duplex DR-463, FR-111

resuming DR-36

reverse DR-26, DR-30

rlogin DR-419, DR-421, DR-422, DR-458 -DR-460

SLIP DR-639

switching between DR-36

Telnet DR-458 -DR-461

Telnet, configuring a line DR-464

TN3270 DR-469

viewing the status of TCP DR-443

X.3 PAD DR-566

XRemote DR-488, DR-492, DR-496

console

: displaying debug messages FR-99
: logging messages FR-507

console port, configuring DR-22

constant bit rate (CBR) port

: circuit information WR-126
: clocking WR-79
: clocking information WR-144
: configuring WR-76
: interface information WR-129, WR-136
: status information WR-124, WR-132

constrained multicast flooding

enabling BR-14

multicast state information

: clearing BR-55
: displaying BR-71

contact string

: setting for SNMP FR-457

continue command FR-315

controller command DR-279

controller configuration commands

: cablelength long VR-10
: cablelength short VR-12
: channel-group VR-13
: clock source VR-17
: loop-detect VR-45
: mode VR-46
: shutdown VR-91
: tdm-group VR-96
: voice-group VR-102

controller t3 command IR-54

copy bootflash rcp command FR-277

copy command FR-266

copy erase flash command

: See erase flash command

copy flash lex command IR-55

copy flash rcp command FR-276

copy modem command DR-76

copy mop flash command FR-271

copy rcp flash command

: example FR-274

copy rcp running-config command FR-277

copy rcp startup-config command FR-277

copy tftp flash command

: example FR-274

copy tftp lex command IR-56

copy verify command

: See verify command

copy verify flash command

: See verify command

copy xmodem command FR-240

copy ymodem command FR-241

cost

: assigning to DECnet P3R-128
: modifying default for transparent bridging BR-38

cost-per-byte command

APPN

: link station BR-600

APPN port BR-601

cost-per-connect-time command

APPN

: link station BR-602
: port BR-603

counters

: clearing IR-30, IR-340
: DECnet P3R-114
: TARP, clearing P3R-192

CPA

: See CMCC adapters

cp-cp-sessions-supported command BR-604

CPP

: and PPP support DR-339
: authentication, negotiating with DR-281, DR-339
: callback, accepting DR-283, DR-340
: encapsulation DR-288, DR-347
: half-bridging DR-288, DR-347
: PPP support DR-281

cpp authentication command DR-281, DR-283, DR-339, DR-340

: usernames and passwords used DR-281

cptone command VR-119

CRC

: G.703/G.704 IR-58
: setting IR-57

crc bits 5 command IR-59

crc command IR-57

crc4 command DR-242, IR-58

crl optional command SR-366

CRLs

certificates

: accepting SR-366
: revoking SR-373

checking SR-366

downloading SR-373

requesting SR-373

retrieving SR-372

: (example) SR-372

storing SR-372

D

data

: inverting IR-120

data bits

: changing character FR-89
: setting for session FR-61

data communications equipment

: See DCE

data compression DR-240

Data Exchange Interface

: See DXI 3.2

data flow control

: setting FR-95

data service unit

: See DSU

data size

: RTR FR-384, FR-385

data terminal equipment

: See DTE, X.25 timers

data terminal ready

: See DTR

databits command FR-60

data-character-bits command FR-61

datagram encapsulation

: alternate destination addresses WR-331

data-link switching

: See DLSw+

dbconn license command BR-717

dbconn ping command BR-718

dbconn server command BR-719

DCE

clock rate IR-39

Frame Relay device WR-227

timing IR-62

X.25 timers

: T10 restart indication WR-386
: T11 incoming call WR-387

DCE (continued)

: T12 reset indication WR-388
: T13 clear indication WR-389

dce-terminal-timing enable command DR-244, IR-62

DDN

: local marker facilities (table) WR-405
: X.121 address caution WR-293
: X.25 encapsulation WR-292

DDR P2R-388

backups with floating-static routes P2R-346

bandwidth on demand DR-695

carrier wait time

: specifying for interface DR-707
: specifying for map class DR-730

chat scripts DR-672

: sample expect-send pairs (table) DR-670
: writing DR-668

clearing dialer interface statistics DR-676, DR-682

controlling dialing

: by protocol DR-664, DR-692, DR-720
: by protocol and access list DR-664, DR-692, DR-720

diagnostics for interface

: displaying DR-221, DR-709, DR-733

dialer hold queue

: and rotary groups DR-688
: dialers supported DR-688

dialer pool, ISDN B channels

: maximum number DR-726
: minimum number DR-726

dialer profile

: CHAP or PAP, username DR-728
: dialer interface data, displaying DR-221, DR-709, DR-733
: dialer pool and dialer pool-member (example) DR-724
: dialer pool, members DR-726
: dialer pool, specifying DR-724
: link to physical interface DR-726
: links, maximum number DR-723
: specifying DR-728

dialer rotary groups

: assigning interfaces DR-702
: setting interface priority DR-701

dialing pool

: dialer profile DR-724

DTR dialing

: not for rotary group (hunt group) leaders DR-677, DR-683
: outgoing calls only DR-677, DR-683
: receiving calls from DR-677, DR-683
: remote interface passive DR-677, DR-683
: remote interface to terminate calls DR-677, DR-683
: show dialer display DR-711, DR-735

floating-static routes P2R-346

identifying best line DR-704

idle time, line DR-689

idle time, map-class DR-718

interface timeout, setting DR-684

IPX

: spoofing watchdog packets P2R-372
: watchdog packets P2R-372, P2R-388

legacy

: assigning dial string-telephone number DR-705
: calls to single site, dial string DR-679, DR-705
: dialer map
: ISDN interfaces DR-346
: dialer map, for outbound calls DR-697
: dialer map, ISDN interfaces DR-343
: enabling DR-678, DR-690
: forwarding broadcasts DR-342, DR-345
: ISDN Advice of Charge, BRI (example) DR-343
: snapshot routing DR-827
: specifying one telephone number DR-679

outbound calls, identifying best line DR-704

protocol address for broadcasts DR-698

setting dialer load threshold DR-695

single DDR telephone number DR-705, DR-729

SPX

: spoofing of watchdog packets P2R-373

supported access list types and numbers (table) DR-665, DR-693, DR-721

telephone number to call

: specifying single DR-679

: See Frame Relay, DE

debug command output

: displaying FR-99

debug messages

: displaying enabled FR-550

debug serial-interface command DR-615

DEC LAT

: See LAT

DEC spanning-tree protocol

: specifying use of BR-50

DECnet

access groups P3R-115

access list (example) DR-907

access lists P3R-104, P3R-106, P3R-110

accounting

: database entries, deleting P3R-112
: database threshold P3R-119
: disabling P3R-116
: enabling P3R-116
: filters P3R-117
: maximum transit entries P3R-120

associate name P3R-131

ATG limitations P3R-133

cluster alias configuration P3R-199

DECnet (continued)

congestion threshold P3R-125

conversion, Phase IV to Phase V P3R-126

cost value for interface P3R-128

default route, on interface P3R-151

designated router P3R-155

end systems P3R-155

equal cost paths P3R-139, P3R-145

extended access lists P3R-104

fast switching P3R-154

filtering packets and routing information DR-902

filters

: on hello messages P3R-132
: on object numbers (table) P3R-108
: on routing information P3R-132

hello timer P3R-130

hop count P3R-124

host name mapping P3R-131

interarea routing cost P3R-123

intra-area routing cost P3R-137

Level 1 routing P3R-143

Level 2 routing P3R-143

maximum packet visits P3R-140

node addresses P3R-135

node type P3R-143

OSI backbone, propagating Phase IV areas P3R-121

path selection P3R-139

Phase IV Prime

: displaying adjacencies P3R-176
: enabling P3R-157
: inherent MAC addresses P3R-103
: MAC addressing advantages P3R-157
: packets sent to Unknown Destination multicast P3R-156

Phase IV through OSI backbone, advertising P3R-121

Phase IV/Phase IV Prime on same LAN P3R-155

Phase IV-to-Phase V conversion P3R-126

ping field descriptions (table) P3R-163

ping test characters (table) P3R-163, P3R-165

propagate static route P3R-146

protocol keywords, SMDS multicast address WR-273

route default P3R-153

routing P3R-157

: cost P3R-123, P3R-137
: table size P3R-136

routing updates P3R-160

SMDS, configuring over WR-273

static routes

: creating P3R-149
: displaying P3R-179
: on interface P3R-147

timers P3R-130, P3R-159

Token Ring

: configuring on P3R-129
: encapsulation over P3R-129

decnet P3R-165

decnet access-group command P3R-115

decnet accounting command P3R-116

decnet accounting list command P3R-117

decnet accounting threshold command P3R-119

decnet accounting transits command P3R-120

decnet advertise command P3R-121

decnet area-max-cost command P3R-123

decnet area-max-hops command P3R-124

decnet congestion-threshold command P3R-125

decnet conversion command P3R-126

decnet cost command P3R-128

decnet encapsulation command P3R-129

decnet hello-timer command P3R-130

decnet host command P3R-131

decnet in-routing-filter command P3R-132

decnet map command P3R-133

decnet max-address command P3R-135

decnet max-area command P3R-136

decnet max-cost command P3R-137

decnet max-hops command P3R-138

decnet max-paths command P3R-139

decnet max-visits command P3R-140

decnet multicast-map command P3R-141

decnet node-type command P3R-143

decnet out-routing-filter command P3R-144

decnet path-split-mode command P3R-145

decnet propagate static command P3R-146

decnet route (interface static route) command P3R-147

decnet route (to enter a static route) command P3R-149

decnet route default (interface default route) command P3R-151

decnet route default (to enter a default route) command P3R-153

decnet route-cache command P3R-154

decnet router-priority command P3R-155

decnet routing command P3R-157

decnet routing-timer command P3R-159

decnet split-horizon command P3R-160

dedicated line, configuring DR-647

default form of a command

: using FR-xxii

default networks, specifying P1R-479

default routes

: IP P1R-479
: IP Enhanced IGRP P1R-222, P1R-306
: IS-IS for IP P1R-254, P1R-337
: OSPF P1R-254, P1R-337
: See also NLSP, default routes

default-information command

: IGRP P1R-222
: IP Enhanced IGRP P1R-306

default-information originate command

: BGP P1R-383
: IS-IS P1R-337

default-information originate command (continued)

: OSPF P1R-254
: RIP P1R-203

default-metric command

: BGP P1R-384
: IGRP P1R-223
: IP Enhanced IGRP P1R-307
: OSPF P1R-256
: RIP P1R-204

default-name command XR-131

default-value exec-character-bits command FR-62, FR-105

default-value special-character-bits command FR-63

Defense Data Network

: See DDN

define command VR-122

delay command IR-61

delete command FR-173

delta

PPP BACP negotiations

: telephone number change DR-791

deny command P1R-127, SR-264

IPX

: SAP filtering P2R-234
: standard P2R-236
: summary P2R-232

deny command (extended) P2R-229

deny command (SAP filtering) P2R-234

deny command (standard) P2R-236

deny command (summary) P2R-232

dependent logical unit requestor

: See DLUR

dependent logical unit server

: See DLUS

description (controller) command IR-63

description command VR-124

description command (controller) DR-284

description command (interface) DR-245, DR-285

designated routers

: IS-IS for CLNS, specifying election P3R-250
: IS-IS for IP, specifying election P1R-348

desired-max-send-btu-size command BR-605

destination routing table

: ISO CLNS, displaying P3R-351

destination-pattern command VR-23

DHCP

: helper addresses P1R-27, P1R-32
: IP address pooling DR-579
: show settings DR-608
: specifying server DR-581

diag command FR-493

dial backup

Dialer Profiles DR-747 -DR-750

Dialer Watch DR-743

: watched routes DR-743

line delay

: setting DR-740

secondary line

: selecting DR-741, DR-748

traffic load threshold

: setting DR-742, DR-750

dial peer configuration commands

: acc-qos VR-4
: alt-dial VR-6
: answer-address VR-7
: codec VR-19
: destination-pattern VR-23
: expect-factor VR-31
: fax-rate VR-32
: forward-digits VR-34
: icpif VR-40
: ip precedence VR-42
: ip udp checksum VR-43
: port VR-53
: preference VR-55
: prefix VR-56
: req-qos VR-57
: session protocol VR-58
: session target VR-59
: shutdown VR-90
: snmp enable peer-trap poor-qov VR-92
: vad VR-98

dial string (telephone number), specifying DR-679, DR-705, DR-729

dial-control-mib command VR-25

dialer DR-678, DR-690

dialer callback-secure command DR-806

dialer callback-server command DR-807

dialer caller command DR-820

dialer dtr command DR-677, DR-683

dialer enable-timeout command DR-684

dialer fast-idle command DR-685

: interface configuration DR-685
: map-class configuration DR-716

dialer group

: assigning interface DR-687, DR-717

dialer hold queue

: dialers supported DR-688
: rotary groups DR-688

dialer hold-queue command DR-688

dialer idle-timeout command DR-689

: interface configuration DR-689
: map-class configuration DR-718

dialer in-band command DR-678, DR-690

dialer interface

clearing statistics DR-676, DR-682

dial backup

: Dialer Profiles DR-747

dialer isdn command DR-719

dialer isdn short-hold command DR-341

dialer isdn spc command DR-719

dialer isdn speed command DR-719

dialer load-threshold command DR-695

: multilink PPP and idle timers DR-599, DR-689, DR-696, DR-797

dialer map

: map class name DR-313

dialer map bridge command DR-697

dialer map class, for ISDN Advice of Charge DR-342

dialer map command DR-342, DR-345, DR-697

: form used for ISDN Advice of Charge DR-342
: form used for ISDN semipermanent connections DR-345
: ISDN Advice of Charge, usage guidelines DR-343
: ISDN semipermanent connections DR-697
: no effect on DTR dialing DR-677, DR-683
: regular expressions DR-902

dialer map snapshot command DR-827

dialer map, defining configuration parameters for DR-732, DR-808

dialer max-link command DR-723

dialer pool

: Dialer Profiles, backup interfaces DR-747

dialer pool command DR-724

dialer pool-member command DR-726

dialer priority command DR-701

Dialer Profiles

: dial backup DR-747 -DR-750

dialer remote-name command DR-728

dialer rotary groups

: assigning interfaces DR-702
: defining DR-708, DR-731
: setting interface priority DR-701

dialer rotary-group command DR-702

dialer rotor command DR-704

dialer string class command DR-729

dialer string command DR-679, DR-705, DR-729

: DDR, dialer profiles DR-729
: legacy DDR DR-679, DR-705
: no effect on DTR dialing DR-677, DR-683

dialer wait-for-carrier-time command

: interface configuration DR-707
: map-class configuration DR-730

Dialer Watch

: overview DR-743
: watched routes DR-743

dialer watch-disable command DR-744

dialer watch-group command DR-745

dialer watch-list command DR-746

dialer-group command DR-687, DR-717

dialer-list protocol command DR-664, DR-692, DR-720

dial-on-demand routing

: See DDR

dial-peer terminator command VR-26

dial-peer voice command VR-27

dial-type command VR-125

Diffie-Hellman

: See IKE, DH

dir command FR-174

direct encapsulation, configuring SRB for BR-228, BR-461

E

E.164

auto conversion

: (example) WR-11

E.164 addresses

ATM

: (example) WR-39
: configuring WR-39

field descriptions WR-237

format WR-237

Frame Relay SVC WR-236

E1 R2

: countries supported DR-260
: country settings DR-260
: customizing parameters DR-260

E3-scramble

: (example) WR-12

early-token-release command IR-71

Easy IP DR-876

echo-cancel coverage command VR-126

echo-cancel enable command VR-128

editing command DR-173, FR-5

editor

enhanced mode

: disabling for a line DR-173, FR-5
: disabling for session FR-39
: enabling for a line DR-173, FR-5
: enabling for session FR-39

Release 9.21 keys and functions (table) DR-173

effective-capacity command

APPN

: link station BR-610
: port BR-611

EGP

neighbor

: relationships P1R-231

EIA/TIA-232

: handshake DR-36

eigrp log-neighbor-changes command P1R-311

enable command FR-8, FR-683, SR-432

enable last-resort command SR-101

enable password command SR-433

using encryption-type

: (caution) SR-433

enable secret command SR-435

using encryption-type

: (caution) SR-435

enable use-tacacs command SR-102

using tacacs-server authenticate enable command

: (caution) SR-102

encapsulation

ATM-DXI IR-72

bstun IR-72

DECnet, over Token Ring P3R-129

display of supported types WR-94, WR-263

dynamic detection on serial or ISDN interface DR-258, DR-338

Frame Relay WR-169

hdlc IR-72

IPX P2R-301, P2R-348

LAPB IR-72, WR-290

PPP DR-247, DR-578, IR-72

SMDS WR-261

V.120

: dynamically set DR-642

VINES P3R-65

X.25 WR-292

XNS P3R-373

encapsulation alc command BR-914

encapsulation atm-ces command VR-199

encapsulation atm-dxi command WR-69

encapsulation bstun command BR-329

encapsulation command DR-247, DR-578, DR-622, IR-72, VR-29, WR-67

encapsulation cpp command DR-288, DR-347

encapsulation frame-relay command WR-169

encapsulation isl command BR-58, XR-3

encapsulation lapb command WR-290

encapsulation sde command BR-59, XR-4

encapsulation sdlc command BR-376

encapsulation sdlc-primary command BR-377

encapsulation sdlc-secondary command BR-379

encapsulation smds command WR-261

encapsulation stun command BR-330

encapsulation tr-isl command BR-201, XR-5

encapsulation x25 command WR-292

encryption algorithm

: See IKE, algorithms

encryption command SR-412

end command FR-9

end station identifier

: See ESI

end system listing

: See ES, listing

end-of-line character

: changing FR-114

enhanced editing mode

: See editor, enhanced mode

enrollment mode ra command SR-384

enrollment retry-count command SR-385

enrollment retry-period command SR-387

enrollment url command SR-388

environment variables

: BOOT, specifying FR-306
: BOOTLDR, specifying FR-302
: CONFIG_FILE, specifying FR-210

environmental conditions

: at last shutdown FR-554
: table of measurements within specification FR-557
: temperature and voltage FR-554

equal cost paths

: DECnet P3R-145

erase bootflash command

: See erase command

erase command FR-176

erase flash command

: See erase command

erase startup-config command

: See erase command

ERPDU

: interval, determining P3R-204
: ISO CLNS P3R-229
: support, configuring P3R-229

error messages

: logging priorities (table) FR-507, FR-570
: redirecting FR-517

: listing P3R-206, P3R-214

escape character

: changing for session FR-93
: defining for a line FR-68
: returning to EXEC prompt DR-488

escape-character command FR-68

ESI

address

: (example) WR-13

ES-IS, hello rate configuration P3R-200, P3R-211

/etc/services file P2R-61

Ethernet

0x80d5 format, enabling use of BR-170

100VG AnyLAN port adapter IR-118, IR-234, IR-325

APPN partner node, specifying BR-622

bandwidth IR-19

bridging from FDDI IR-79

encapsulated packets

: filtering on input BR-29
: filtering on output BR-37

extending twisted-pair 10BaseT capability IR-347

MOP enabled IR-152

specifying media type IR-151

Ethernet type codes

: (table) BR-923

ethernet-transit-oui command BR-60, BR-99

EtherTalk P2R-1

evaluate command SR-152

exception core-file command FR-496

exception dump command FR-497

exception linecard command FR-499

exception memory command FR-501

exception protocol command FR-503

exception queue

length

: (example) WR-15

exception slot command BR-763

exchange identification frames

: See XID frames

EXEC

mode

: default aliases FR-610

process

: delaying startup of FR-655
: disabling on a line DR-13, FR-132
: displaying messages upon creation FR-122
: enabling on a line DR-13, FR-132
: setting timeout interval DR-14, FR-135

prompt

: setup command facility FR-49

exec command DR-13, FR-132

EXEC process

: disabling on a line DR-13, FR-132
: enabling on a line DR-13, FR-132
: setting timeout interval DR-14, FR-135

exec-banner command FR-122, FR-126

exec-character-bits command FR-69

exec-timeout command DR-14, DR-186, FR-135

execute-on command FR-243

exit

: configuration mode FR-9

exit command FR-10

expect-factor command VR-31

explorers

spanning-tree

: forwarding or blocking BR-181

explorers, forwarding or blocking

: all-routes BR-179
: spanning-tree BR-180

exponential weight factor

: DWRED QR-41

extended access lists

IP P1R-112

: named dynamic P1R-131

IPX P2R-206

extended networks

: IP, using secondary addresses P1R-15

extended TACACS

: username authentication DR-615

external port

: T1 IR-351

F

Facility Data Link

: See FDL

facility handling

X.25 WR-403

: marker facility (table) WR-405
: standard (table) WR-404

fair queueing

: See DWFQ and WFQ

fair-queue command QR-7

Fast EtherChannel IR-26

: assigning a Fast Ethernet IR-26
: configuring IR-116
: displaying information IR-285

Fast Ethernet

: assigning a Fast EtherChannel IR-26
: displaying Fast EtherChannel information IR-285
: Fast EtherChannel IR-26
: Fast EtherChannel interface IR-116

fast idle timer

: interface, setting DR-685
: map class, setting DR-716

fast switching

AppleTalk P2R-81

: configuring P2R-81
: displaying cache entries P2R-121

flow XR-11

: enabling XR-11

IPX

: cache entries, deleting P2R-223
: cache entries, displaying P2R-421
: directed broadcast packets P2R-258
: disabling P2R-348
: enabling P2R-348
: inactivity timeout P2R-350
: update timeout P2R-352

ISO CLNS P3R-222

SRB BR-189

SSE BR-191

transport, configuring BR-223, BR-457

VINES

: cache entries
: deleting P3R-20
: displaying P3R-27
: configuring P3R-82

XNS P3R-388

Fast-Sequenced Transport

: See FST

fast-switched SR/TLB

: disabling BR-198

fax-rate command VR-32

FDDI

: APPN partner node, specifying BR-622
: bit specifications IR-77
: bridging configurations IR-79
: determining bandwidth IR-86
: encapsulation mode compatibility IR-79
: full-duplex IR-94, IR-95
: full-duplex status IR-264
: raw, IPX encapsulation P2R-301
: stopping IR-49
: transmission time, controlling IR-84

fddi burst-count command IR-74

fddi c-min command IR-75

fddi cmt-signal-bits command IR-76

fddi duplicate-address-check command IR-78

fddi encapsulate command IR-79

fddi frames-per-token command IR-81

fddi smt-frames command IR-82

fddi tb-min command IR-83

fddi tl-min-time command IR-84

fddi token-rotation-time command IR-86

fddi t-out command IR-85

fddi valid-transmission-time command IR-87

FDDITalk P2R-1, P2R-74

FDL

: performance report IR-353, IR-361

fdl command IR-88

FECN

: bits WR-246

FID4 frames, configuring the router to read BR-222

file

: display FR-185

file compression FR-220

file prompt command FR-179

file system

: erase FR-176
: list FR-174
: setting the default FR-170

files

: download mode FR-92

filter register

AIP

: (example) WR-44
: configuring WR-44

filter-for-history command FR-376

filtering

: by protocol type, Ethernet type codes (table) BR-923
: establishing packet size for SNMP FR-470

filters

AppleTalk

: applying GZL P2R-55
: data packet, applying P2R-21
: GZL P2R-39
: partial zone P2R-73
: routing table P2R-37, P2R-39

IP Enhanced IGRP

: routes in updates P1R-475
: routes in updates, advertising P1R-477
: routing updates, preventing P1R-511

IP, on sources of routing information P1R-473

IPX

: broadcast P2R-278
: generic P2R-246
: NetBIOS P2R-298, P2R-300
: routing table P2R-283, P2R-356
: routing updates P2R-358
: SAP P2R-285, P2R-336, P2R-358

IPX Enhanced IGRP

: route updates P2R-238, P2R-240

IPX SAP

: routes in updates
: processing P2R-242

NLSP

: route updates P2R-238, P2R-240

VINES

: access lists
: extended P3R-55
: simple P3R-57
: standard P3R-60
: interface, applying to P3R-53

XNS

: enabling P3R-389
: generic, enabling P3R-372
: routing table, enabling P3R-382

FIN-exchange timeout

: specifying SR-195

Finger protocol

: enabling FR-656

FIP

: displaying information about IR-206

Flash file system

: check and repair FR-182
: format FR-181
: make directory FR-184
: recover deleted file FR-201
: remove directory FR-189
: rename file FR-188
: squeeze FR-197
: verify memory FR-203

Flash load helper, monitoring FR-252

Flash memory

booting automatically FR-306

erasing internal FR-282

formatting FR-180

partitioning FR-284

verifying checksum FR-203

: MOP FR-271

Flash memory device

: deleting a file FR-173

floating static routes

: AppleTalk extended networks P2R-89
: AppleTalk nonextended networks P2R-91
: See also AppleTalk, floating static routes; IPX, floating-static routes

flow control

: changing for session FR-95
: configuring for a line DR-15
: end transmission FR-109
: input, X.3 PAD parameters DR-897
: start character FR-107
: start character, configuring for a line DR-59, DR-188
: stop character FR-109
: stop character, configuring for a line DR-62

flow switching

: See switching; NetFlow Switching

flowcontrol command DR-15

format command FR-180

format indicator 4 (FID4) frames, configuring the router to read BR-222

forward delay interval, specifying BR-18

forward explicit congestion notification

: See FECN

forward-digits command VR-34

forwarding database, clearing BR-54

forwarding mask

: X.3 PAD DR-894

fractional data line DR-279

Frame Rejects (FRMRs)

: SDLC, configuring BR-398

Frame Relay

APPN partner node, specifying BR-612

bandwidth, estimating QR-83

Bc WR-172

Be WR-174

bridging over BR-62, WR-212

broadcast queue

: actual transmission rate limit WR-177
: maximum transmission rate measures WR-177
: priority WR-177

broadcast queue, creating WR-177

broadcast traffic, defined WR-177

CIR, minimum acceptable, specifying WR-216

committed burst size (Bc), specifying WR-172

compression, Stacker packet-by-packet WR-218

conditions that bring down WR-204

configured routes, displaying WR-252

custom queue, associating with map class WR-182

: group number for DLCI WR-183

DE bit, purpose WR-184

DE group

: deleting all groups WR-183
: deleting one group WR-183

DE list

: deleting entire list WR-185
: deleting part WR-184

disabling split horizon P1R-209, P1R-225

discard eligibility

: See DE

DLCI

: forwarding broadcasts to WR-212, WR-213
: interface statistics WR-257
: mapping protocol address to WR-209
: multicast mechanism WR-213
: multicast mechanism statistics WR-257
: multicasts WR-217
: setting source in test environment WR-208

enabling WR-169

encapsulation

: cisco VR-35, WR-169, WR-188
: IETF VR-35, WR-169, WR-188, WR-209, WR-212

excess burst size (Be), specifying WR-174

FECN/BECN bit passing WR-246

general statistics, displaying WR-256

idle timeout, specifying interval WR-186

IETF encapsulation, effect on TCP/IP header compression WR-193, WR-214

Inverse ARP WR-168, WR-191

IP map, inheriting compression characteristics from interface WR-214

keepalive mechanism

: setting WR-233

LAPF

: display status of internals WR-240
: FRMR frame, sending WR-195
: link idle timer, setting WR-200
: maximum length of information field, setting WR-198
: maximum retransmission count, setting WR-197
: retransmission timer, setting WR-199
: window size, setting WR-196

LAPF commands WR-197, WR-198, WR-199, WR-200

LAPF commands, usually not used WR-196

LMI

: general statistics, displaying WR-242, WR-257
: keepalive interval WR-233
: type, selecting WR-207

LMI DCE

: error threshold WR-202
: monitored events count WR-204
: polling verification timer WR-206

LMI DTE

: error threshold WR-203
: full status polling interval WR-201
: monitored event count WR-205

LMI NNI

: error threshold WR-202, WR-203
: monitored events count WR-204, WR-205
: polling verification timer WR-206

map class

: DLCI WR-166
: interface or subinterface WR-180
: routing protocols supported WR-164

map list

: configuration and display WR-253
: map class and QOS parameters WR-236

OSPF over WR-209

point-to-point links WR-212

PVC

: displaying statistics for WR-246
: status WR-246
: switching on DCE WR-227
: switching on NNI WR-227

QOS parameters, applying to map list WR-234

routes, configured, displaying WR-252

routing protocols supported WR-209

RTP header compression

: enabling P1R-575
: enabling per DLCI P1R-577
: enabling with TCP header compression P1R-576
: statistics, displaying P1R-647

Frame Relay (continued)

SVC support WR-164, WR-179, WR-216, WR-226

: X.121 or E.164 addresses WR-236

SVCs

: displaying all for map list WR-253
: enabling WR-226
: map group for interface required WR-235

switching, enabling WR-227

TCP/IP header compression

: active WR-214
: Cisco encapsulation WR-214
: displaying interface information WR-238
: inconsistent with IETF encapsulation WR-193
: outgoing WR-193
: passive WR-214
: supported interfaces WR-193

test environment WR-208, WR-217

traffic shaping QR-83, QR-88, QR-90, WR-172, WR-174

: default queuing WR-230
: operation on SVCs WR-228
: per-VC queuing WR-230

virtual circuits, assigning priority queue WR-222

frame type

: channelized E1, channelized T1 DR-289
: selecting IR-89

framed mode on G.703-E1 interface DR-252, IR-364

frame-relay adaptive-shaping command WR-170

frame-relay bc command WR-172

frame-relay be command WR-174

frame-relay broadcast-queue command WR-177

frame-relay cir command WR-179

frame-relay class command WR-180

frame-relay custom-queue-list command WR-182

frame-relay de-group command WR-183

frame-relay de-list command WR-184

frame-relay frmr command WR-195

frame-relay idle-timer command WR-186

frame-relay interface-dlci command VR-35, WR-188

frame-relay intf-type command WR-190

frame-relay inverse-arp command WR-191

frame-relay ip rtp header-compression command P1R-575

frame-relay ip tcp header-compression command WR-193

frame-relay lapf k command WR-196

frame-relay lapf n200 command WR-197

frame-relay lapf n201 command WR-198

frame-relay lapf t200 command WR-199

frame-relay lapf-t203 command WR-200

frame-relay lmi-n391dte command WR-201

frame-relay lmi-n392dce command WR-202

frame-relay lmi-n392dte command WR-203

frame-relay lmi-n393dce command WR-204

frame-relay lmi-n393dte commands WR-205

frame-relay lmi-t392dce command WR-206

frame-relay lmi-type command WR-207

frame-relay local-dlci command WR-208

frame-relay map bridge broadcast command BR-62

frame-relay map bridge command WR-212

frame-relay map bstun command BR-332

frame-relay map clns command WR-213

frame-relay map command WR-209

frame-relay map ip compress command P1R-576

frame-relay map ip rtp header-compression command P1R-577

frame-relay map ip tcp header-compression command WR-214

frame-relay map llc2 command BR-333, BR-550

frame-relay map rsrb command BR-551

frame-relay mincir command WR-216

frame-relay multicast-dlci command WR-217

frame-relay payload-compress command WR-218

frame-relay payload-compress packet-by-packet command WR-218

frame-relay priority-dlci-group command WR-220

frame-relay priority-group command WR-222

frame-relay qos-autosense command WR-223

frame-relay route command VR-37, WR-225

frame-relay svc command WR-226

frame-relay switching command WR-227

frame-relay traffic-rate command WR-228

frame-relay traffic-shaping command WR-230

frames

: forwarding BR-8, BR-48
: maximum size on source-route bridge BR-225, BR-228, BR-230, BR-234, BR-459, BR-461, BR-463
: using bridge address to filter BR-9

framing

IPX

: See IPX, encapsulation

T1 IR-354

T3 IR-92

framing (E1/T1controller) command IR-89

framing (E3/T3 interface) command IR-90

framing (T3 controller) command IR-92

framing command

: channelized E1, channelized T1 DR-289

FRAS

BAN

: configuring BR-554
: displaying status BR-564
: enabling BR-557

BNN

: displaying status BR-564
: DLCI
: LLC connection BR-560
: enabling BR-558
: LLC connection, associating BR-560

congestion

: managing BR-563

FRAS (continued)

connection state

: displaying status BR-564, BR-568

dial backup over DLSw+

: displaying status BR-564
: enabling BR-552

DLCI

: SDLC link, associating BR-561

DLCI backup, configuring BR-556

host

: LLC2 local termination BR-559

LLC2

: sessions, displaying status BR-566
: traffic, mapping BR-550

mapping

: displaying status BR-568

RSRB

: DLCI number BR-551

SDLC

: link, associating BR-561

source-bridge command BR-167

SRB

: configuring BR-569

fras backup dlsw command BR-552

fras ban command BR-554

fras ddr-backup command BR-556

fras map llc command BR-560

fras map sdlc command BR-561

fras-host ban command BR-557

fras-host bnn command BR-558

fras-host dlsw-local-ack command BR-559

fr-atm connect dlci command VR-39, WR-231

fr-dest-address command BR-612

free-trade zone

AppleTalk P2R-54

: establishing P2R-54

frequency command FR-378

FRF.9 compression

: example configuration WR-211

FRMRs

: SDLC, configuring BR-398

front panel LED message FR-235

fsck command FR-182

FST

: configuring BR-223, BR-230, BR-457, BR-459

FTP Server

: restricted regions FR-686
: router acting as FR-685

ftp-server enable command FR-685

ftp-server topdir command FR-686

full-duplex command IR-93

full-help command FR-11

functional address P1R-615

G

G.703-E1 interface

: clock source IR-45, IR-47
: CRC IR-58
: CRC4 DR-242
: framed mode DR-252, IR-364
: time slot 16 DR-255, IR-367
: unframed mode DR-252, IR-364

G.704 interface

: CRC IR-58

gateway of last resort

IGRP and RIP

: computing P1R-479

generic route encapsulation

: See GRE

generic-pool command BR-765

Get Nearest Server

: See GNS

GetZoneList

: See GZL

global configuration mode FR-216

: summary FR-xxi

global translation options

: translate command DR-511, DR-520, DR-529
: translate lat command DR-514
: translate tcp command DR-524
: translate x25 command DR-535

GNS

filters P2R-329

responding to requests P2R-274

: delay in P2R-273

GRE IR-372, IR-374, P2R-201

: over IP P1R-107

group and member asynchronous interfaces DR-17, DR-24, IR-115

group codes

: denying access BR-25, BR-32
: permitting access BR-26, BR-33

group command SR-413

group range command DR-17

guests

: allowing and disallowing DR-651

GZL

: replies P2R-39, P2R-55
: requests P2R-39

H

half-bridging

AppleTalk DR-592

Combinet devices

: not supporting PPP DR-288, DR-347

half-bridging (continued)

: IP DR-593
: IPX DR-594
: serial or ISDN, and Ethernet subnetwork DR-592, DR-593, DR-594

half-duplex command IR-95

half-duplex controlled-carrier command IR-97

half-duplex timer command IR-99

hardware

: break signal FR-110
: flow control FR-95

hardware compression IR-51, WR-209, WR-218

hardware compression, displaying IR-195

hardware flow control

: configuring for a line DR-15

hash algorithm

: See IKE, algorithms

hash command SR-414

HDLC

compression IR-51

encapsulation

: enabling BR-371

traffic

: forwarding BR-368

header options

: Internet, supported P1R-75

header-compression translate option

: mapping to virtual interface template command DR-515, DR-536

Health Monitor

: managed shelf polling FR-700
: SNMP traps FR-715, FR-717

heartbeat

: DXI 3.2 on SMDS WR-269

hello BPDUs

: specifying intervals BR-44

hello packets

AppleTalk Enhanced IGRP P2R-51

IP Enhanced IGRP

: interval between P1R-315
: valid time P1R-316

IPX

: Enhanced IGRP P2R-275

IS-IS for IP, setting interval P1R-342

ISO CLNS

: configuration time P3R-200
: hold time P3R-211
: multiplier P3R-245

Net/One P3R-355, P3R-391

help

: user-level commands FR-11

help command FR-xvii, FR-13

helper addresses

: IP FR-160, P1R-26, P1R-88, QR-65
: IPX P2R-278

High System Availability

: See HSA

High-Level Data Link Control

: See HDLC

history command FR-15

history for RTR

: buckets kept FR-366
: displaying FR-440
: filters FR-376
: lives kept FR-381
: samples kept FR-402

hold character

: changing for session FR-96
: configuring for line FR-71

hold queue

: X.25 packet WR-339

hold time

: AppleTalk Enhanced IGRP P2R-51
: IP Enhanced IGRP P1R-316
: IPX Enhanced IGRP P2R-281

hold-character command FR-71

holding-time command XR-183

hold-queue command DR-18, IR-102

hop count

: DECnet P3R-124

hops-of-statistics-kept command FR-379

host configuration file FR-212

changing FR-212

copying from a server using rcp FR-271

: example FR-277

default filename FR-222

loading from a server FR-212, FR-222

host name

: defining X.25 DR-548
: router FR-625
: VINES, displaying entries P3R-30
: X.25, defining WR-341

host-failed message DR-366

: enabling FR-129

hostname command FR-625

Hot Standby Router Protocol

: burned-in address P1R-192
: enabling P1R-184
: hello time P1R-180
: hold time P1R-180
: interfaces, tracking P1R-190
: MAC refresh interval P1R-186
: password, configuring P1R-183
: preemption P1R-187
: preemption delay P1R-187
: prioritize by tracking other interfaces P1R-190
: priority P1R-187
: status, displaying P1R-179

Hot Standby Router Protocol (continued)

: timers, setting P1R-189
: tracking interfaces for priority P1R-190

hours-of-statistics-kept command FR-380

HP Probe Proxy

: name requests P1R-67

hpr command

: APPN control point BR-613
: APPN link station BR-614
: APPN port BR-615

hpr retries command BR-617

hpr sap command BR-618

hpr timers liveness command BR-619

hpr timers path-switch command BR-620

hpr-max-sessions command BR-616

HSA

automatic synchronization mode, starting FR-329

configuration synchronization

: automatic FR-329
: manual FR-333

configuring default slave RSP FR-330

master and slave, ensuring identical configurations FR-329

reload slave RSP card FR-332

slave image

: reloading FR-332
: specifying FR-331

synchronizing configurations

: automatically FR-329
: manually FR-333

hssi external-loop-request command IR-104

hssi internal-clock command IR-105

hub command IR-106

hub ports

: automatic receiver polarity reversal IR-18
: clearing hub counters IR-33
: enabling IR-106
: hub statistics, displaying IR-240
: link test function IR-133
: MAC address IR-344
: resetting IR-32
: shutting down IR-339
: source address control IR-344

I

ICMP Echo message

: ping command sending P1R-74

ICMP Router Discovery Protocol (IRDP)

: enabling P1R-35

ICMP subnet masks P1R-14

icpif command VR-40

idle interval

: changing BR-47

idle time DR-57, DR-506

idle time, DDR

: setting for line DR-689
: setting for map-class DR-718

idle timer

: multilink PPP and dialer-load threshold DR-599, DR-689, DR-696, DR-797

idle-terminal message

: enabling FR-145

idle-time command BR-767

idle-timeout command WR-70

IDP

: encapsulation format P2R-205

IEEE 802-encapsulated packets

: assigning an access list to filter on input BR-177
: assigning an access list to filter on output BR-183
: filtering on input BR-27
: filtering on output BR-34

IEEE spanning-tree protocol

: specifying use BR-50
: See also spanning-tree, protocol

IETF

: Frame Relay encapsulation WR-169

I-frames, size limitations for LLC2 BR-444

IGMP

: See IP multicast routing, IGMP

ignore command VR-130

ignore-dcd command DR-248, IR-107

ignore-lsp-errors command P3R-238

IGRP

: enabling P1R-234
: offsets for routing metrics P1R-233
: offsets, applying P1R-233
: traffic distribution, controlling P1R-239, P1R-333

IKE

algorithms

: encryption, specifying SR-412
: encryption, specifying (example) SR-412
: hash, specifying SR-414
: hash, specifying (example) SR-414

authentication

: methods, specifying SR-397

connections

: clearing SR-399
: clearing (example) SR-399

description

: feature SR-393

: group identifier, specifying SR-413

disabling SR-400

: (example) SR-400

enabling SR-400

group identifier

IKE (continued)

: specifying SR-413
: specifying (example) SR-413

ISAKMP identity

: configuring (example) SR-401

keys

: See keys, pre-shared

negotiations

: states SR-423

policies

: configuration (example) SR-406
: multiple SR-405
: parameters, specifying SR-405
: parameters, viewing SR-421
: viewing SR-421

requirements

: IPSec peers SR-400

K

keepalive command BR-773, IR-125

: Frame Relay WR-233

keepalive interval, LMI

: defining WR-233
: setting, example WR-233

keepalive packets

: generating FR-529, FR-530

keepalive timer

: ATM (example) WR-148

keepalive timer, setting rate, LAT DR-391

keepalive translate option, mapping to virtual interface template command DR-515, DR-536

keepalives P2R-372

: IPX P2R-388
: SPX P2R-373

keepalive-time command XR-184

kerberos clients mandatory command SR-124

kerberos credentials forward command SR-125

kerberos instance map command SR-126

kerberos local-realm command SR-127

kerberos preauth command SR-128

kerberos realm command SR-129

kerberos server command SR-130

kerberos srvtab entry command SR-131

kerberos srvtab remote command FR-183, SR-133

key chain command P1R-489

key command P1R-487

key config-key command SR-134

unrecoverable DES key

: (caution) SR-134

keymap command DR-374

keymaps

: custom, creating DR-376
: default DR-377
: special characters DR-376
: specifying for session FR-97
: syntax DR-376

keymap-type command DR-381

keys

pre-shared

: configuration (example) SR-397
: deleting SR-403
: specifying SR-403
: specifying (example) SR-404

key-string command P1R-491, SR-415

krb5 SRVTAB file

: retrieve FR-183

L

lan command BR-775

LAN Extender interface

access list filtering

: on Ethernet packets IR-128
: on MAC address IR-127

access-list (standard) command IR-2

burned-in MAC address IR-126

downloading

: from Flash IR-55
: from TFTP server IR-56

priority output queuing IR-129

rebooting IR-28

retry count IR-130

show statistics IR-276

timeout IR-131

LAN Network Manager

: See LNM

lan-dest-address command BR-622

LANE

ATM addresses

: automatic assignment XR-133
: configuration server XR-133
: fixed assignment XR-145
: manual assignment XR-140
: templates
: ESI XR-136
: prefix XR-136

broadcast-and-unknown server

: manually specifying ATM address XR-135
: providing different address to client XR-135

client

: activating on subinterface XR-137
: adding address to database XR-129
: ATM address, providing manually XR-138
: exiting and rejoining emulated LAN XR-124
: one per subinterface XR-137

configuration server, ATM address

: assigning XR-133
: identifying to server and client XR-140
: specifying XR-140

default LAN name in configuration server database XR-131

emulated LAN

: client exiting and rejoining XR-124
: forcing client to join new XR-127
: one per subinterface XR-137

LE ARP table, clearing entries XR-124, XR-125

LECS

: specifying a list of LECS addresses to use XR-147

MPOA

: ELAN ID XR-154

simple LANE service replication XR-157

lane auto-config-atm-address command XR-133

lane bus-atm-address command XR-135

lane client command XR-137

lane client mpoa client name command XR-185

lane client mpoa server name command XR-186

lane client-atm-address command XR-138

lane config database command XR-142

lane config-atm-address command XR-140

lane database command XR-144

lane fixed-config-atm-address command XR-145

lane global-lecs-address command XR-147

lane le-arp command XR-148

lane server-atm-address command XR-150

lane server-bus command XR-152

lan-name command BR-524

Lanoptics Hub Networking Management IR-134

LAPB

: compression DR-240, IR-51
: encapsulation WR-290
: frame retransmssion parameter (N2 frame) WR-299
: hardware outage WR-294
: idle timer (T4 parameter) WR-302
: interface outage timer WR-294
: interface statistics, displaying WR-309
: modulo, description WR-296

LAPB (continued)

outstanding frames

: acknowledgment (modulo parameter) WR-296
: maximum number (window parameter) WR-295
: N1 bits WR-297

retransmission timer (T1 parameter) WR-301

unsignaled link failure WR-302

window size (k parameter) WR-295

lapb interface-outage command WR-294

lapb k command WR-295

lapb modulo command WR-296

lapb n1 command WR-297

lapb n2 command WR-299

lapb protocol command

: See encapsulation lapb command

lapb t1 command WR-301

lapb t4 command WR-302

LAT

access control

: assigning names to group lists DR-387
: defining a group list DR-393
: on connections DR-364
: specifying access conditions to nodes DR-384

associating a command with a service DR-398, P3R-162

associating a rotary group with a service DR-406

compression, specifying BR-30

deleting entry from connection queue DR-367

description DR-382

enabling DR-386

group code filtering

: configuring BR-46
: displaying BR-79

group code mask, specifying DR-400

inbound connections, enabling DR-399

keepalive timer, setting DR-391

learned services DR-430

listing

: available services DR-382, DR-430

making a connection DR-382 -DR-383

maximum number of sessions, setting DR-408

node name, changing DR-392

opening multiple connections DR-382

password for a service, setting DR-403

protocol translation options DR-519, DR-528

proxy node, configuring DR-405

receive buffers

: setting for host DR-389
: setting for server DR-396

retransmission limit, setting DR-395

service advertisement timer DR-407

service announcements

: configuring DR-397
: reenabling DR-397

service groups

: permitting access based on BR-26
: specifying for filtering BR-25

service identification, setting DR-402

static service rating, setting DR-404

transmission interval, setting DR-409

viewing

: active sessions DR-431
: learned LAT services DR-430

lat access-list command DR-384

lat command DR-382

lat enabled command DR-386

lat group-list command DR-387

lat host-buffers command DR-389

lat host-delay command DR-390, P3R-161

lat ka-timer command DR-391

lat node command DR-392

lat out-group command DR-393

lat remote-modification command DR-394

lat retransmit-limit command DR-395

lat server-buffers command DR-396

lat service autocommand DR-398

lat service autocommand command P3R-162

lat service enabled command DR-399

lat service ident command DR-402

lat service password command DR-403

lat service rating command DR-404

lat service rotary command DR-406

lat service timer command DR-407

lat service-announcements command DR-397, DR-400, DR-407

lat service-group command DR-408

lat service-responder command DR-407

lat vc-sessions command DR-408

lat vc-timer command DR-409

Layer 2 Forwarding

: tunnel information, displaying DR-838

LDAP protocol support

: specifying SR-389

LE ARP table

: dynamic entries, clearing XR-125

leaf router P1R-628

length command FR-73

Level 1 routers P3R-254

Level 2 routers P3R-254

lex burned-in-address command IR-126

lex input-address-list command IR-127

lex input-type-list command IR-128

lex priority-group command IR-129

lex retry-count command IR-130

lex timeout command IR-131

lifetime command SR-417

limited-resource command

: APPN, link station BR-623
: APPN, port BR-624

limiting LU sessions BR-752

line

characteristics, modifying remotely DR-394

console port, configuring DR-22

folding, X.3 DR-896

number

: absolute DR-22

virtual terminal DR-22

line build-out

: See LBO

line coding

: T1 IR-355

line coding format DR-250, IR-157

line command DR-21

line configuration mode, entering DR-21

line feed

: insertion, X.3 PAD parameters DR-897
: padding, X.3 PAD parameters DR-898

line number

: auxiliary DR-22
: relative DR-21
: virtual terminal DR-22

line speed

receive speed

: changing for session FR-104

transmit and receive speed

: changing for session FR-106

transmit speed

: changing for session FR-116

line types DR-22

linecode command DR-307, IR-132

line-code type, selecting DR-307, IR-132

lines

: disconnecting DR-371
: displaying information about DR-57, DR-506
: sending messages to FR-140

Link Access Procedure, Balanced

: See LAPB

link command BR-777

Link Quality Monitoring (LQM)

: enabling DR-605

link state metrics

: IS-IS for IP, configuring P1R-346

link traps

: disabling FR-480

link-queuing command BR-625

link-state metrics

: configuring IS-IS P3R-248

link-state packet

: See NLSP, LSP

link-state PDU

: discarding P3R-238
: MTU, setting P3R-256
: retransmission interval P3R-251

link-test command IR-133

lives-of-history-kept command FR-381

LLC2

CMNS support BR-375

connection information, displaying BR-425

display

: active connections BR-800

local acknowledgment, enabling for SNA traffic prioritization BR-222

polling frequency, configuring BR-384

wait interval for an acknowledgment, configuring BR-380

XID transmissions, specifying frequency of BR-392

llc2 ack-delay-time command BR-380

llc2 ack-max command BR-382

llc2 dynwind command BR-563

llc2 idle-time command BR-384

llc2 local-window command BR-385

llc2 n2 command BR-386

llc2 t1-time command BR-387

llc2 tbusy-time command BR-388

llc2 tpf-time command BR-389

llc2 trej-time command BR-391

llc2 xid-neg-val-time command BR-392

llc2 xid-retry-time command BR-393

LMI

: ANSI T1.617 Annex D WR-207
: CCITT Q.933 Annex A WR-207
: Cisco Group 4 WR-207
: Frame Relay type, selecting WR-207
: general statistics, displaying WR-242, WR-257
: keepalive interval WR-233
: type, displaying WR-207

LMI DCE

: error threshold WR-202
: monitored events count WR-204
: polling verification timer WR-206

LMI DTE

: error threshold WR-203
: full status polling interval WR-201
: monitored event count WR-205

LMI NNI

: error threshold WR-202, WR-203
: monitored events count WR-204, WR-205
: polling verification timer WR-206

LNM

configuration report server BR-104

displaying information

: for one or more interfaces BR-154
: for one or more stations BR-158
: for one or more Token Rings BR-157

ring error monitor BR-111

ring parameter server BR-112

lnm alternate command BR-102

lnm crs command BR-104, BR-105, BR-110

lnm express-buffer command BR-106

lnm loss-threshold command BR-107

lnm password command BR-108

lnm rem command BR-111

lnm rps command BR-112

lnm snmp-only command BR-113

lnm softerr command BR-114

load balancing, IP Enhanced IGRP P1R-334

load sharing

: Apollo Domain P3R-5
: IPX P2R-296
: XNS P3R-383

load statistics

: interval FR-629

loading the configuration file FR-214

load-interval command FR-629

locaddr-priority command BR-208

locaddr-priority-list command BR-210, BR-334

local acknowledgment

current state of, displaying BR-455

for LLC2 BR-234

: source-bridge remote-peer tcp command, using with BR-234, BR-463

for SDLLC connections, enabling BR-467

Local Area Transport

: See LAT

Local Management Interface

: See LMI; Frame Relay, LMI

local preference value, BGP, setting P1R-536

local-area mobility P1R-37

local-lnm command IR-134

local-sap command BR-626

LocalTalk P2R-1

locate-queuing command BR-627

location command BR-525, FR-74

location string

: setting FR-467

lock command DR-410

lockable command FR-75

lock-and-key

idle timeouts SR-144

temporary entries

: clearing manually SR-144, SR-147
: creating manually SR-145
: enabling SR-144

lock-and-key access

: absolute timeout P1R-112, P1R-131
: creating dynamic access list P1R-112, P1R-131

log-adjacency-changes command P2R-389, P3R-255

logging

VPDN

: events DR-849

logging buffer

: clearing FR-492

logging buffered command FR-506

logging command FR-505

logging console command FR-507

logging facility command FR-509

: facility-type keywords (table) FR-509

logging history command FR-511

logging history size command FR-511, FR-513

logging in

: as specific user DR-411
: to change login username DR-411

logging linecard command FR-514

logging messages

: See message logging

logging monitor command FR-516

logging on command FR-517

logging source-interface command FR-519

logging synchronous command FR-520

logging syslog-server command FR-687

logging trap command FR-522

Logical Link Control, type 2

: See LLC2

logical unit

: See LU address

: setting timeout value SR-49

using list-names

: (caution) SR-31

log-neighbor-changes command P1R-311, P2R-391

logout

: warning users of impending FR-76

logout-warning command FR-76

loop detection buffer

: clearing table P3R-193
: displaying table P3R-315
: setting timer P3R-327

loopback

: ATM packets (example) WR-77
: channelized T1 or E1 channel-group DR-310
: DS-3, channelized T1 link DR-312
: dte IR-143
: from MIP over dedicated T1 link DR-311
: MCI serial card IR-135
: over DS-3 or channelized T1 link IR-146, IR-147
: SCI serial card IR-135
: T1 line DR-309
: through CSU/DSU IR-144
: X.21 DTE limitation IR-135

loopback (E3/T3 interface) command IR-137

loopback (interface) command IR-135

loopback (T1 interface) command IR-138

loopback (T3 controller) command IR-141

loopback applique command IR-142

loopback command VR-44, WR-77

loopback command (E1 controller) DR-308

loopback dte command IR-143

loopback interfaces IR-110

: assigning IPX network to DR-631
: assigning virtual terminal lines to DR-541

loopback line command IR-144

loopback local command (interface) DR-310

loopback local command (T1 controller) DR-309

loopback remote (interface) command IR-146

loopback remote command (controller) DR-311

loopback remote command (interface) DR-312

loop-detect command VR-45

low-speed serial interfaces

: physical layer IR-158

LQM DR-605

lsap command BR-779

LSP

: See NLSP, LSP

lsp-gen-interval command P2R-392

lsp-mtu command P2R-393, P3R-256

lsp-refresh-interval command P2R-394

LU address

: logical units, mapping to queuing priorities based on BR-210
: priority list, specifying BR-213
: queuing priorities BR-334

LU sessions, limiting BR-752

LZS compression algorithm IR-51

M

MAC address

: mapping to IP address FR-342

mac-address command BR-115

MacIP

: addresses, allocating P2R-65, P2R-69
: clients, displaying P2R-140
: server, establishing P2R-67
: servers, displaying P2R-141
: traffic statistics P2R-144

Maintenance Operation Protocol

: See MOP

manual booting

: from Flash FR-298
: from ROM FR-298

map class

: dialer map DR-313

map-class command DR-732

map-class dialer command DR-313, DR-732, DR-808

map-class frame-relay command WR-234

map-group command

: Frame Relay WR-235

map-list command

Frame Relay WR-236

source and destination addresses

: E.164 or X.121 WR-236

mapping

MAC address-to-IP address FR-342

name-to-NSAP address P3R-212

NSAP-to-SNPA address P3R-206, P3R-214

NSAP-to-TID

: mapping P3R-336

TID-to-NSAP address P3R-321, P3R-329

masks, format in displays P1R-52, P1R-100

master bundle interface host DR-771

match address command SR-271, SR-337

match as-path command P1R-391

match clns address command P3R-257

match clns next-hop command P3R-258

match clns route-source command P3R-259

match community-list command P1R-393

match interface command P1R-493, P3R-260

match ip address command P1R-495

match ip next-hop command P1R-498

match ip route-source command P1R-500

match length command P1R-502

match metric command P1R-504, P3R-261

match route-type command P1R-506, P3R-262

match tag command P1R-508

max-cached-entries command BR-628

max-cached-trees command BR-629

maximum paths

: Apollo Domain P3R-5
: IPX P2R-296
: XNS P3R-383

maximum transmission unit

: See MTU

maximum-lus command BR-782

maximum-memory command BR-630

maximum-paths command P1R-510

max-link-stations command BR-631

max-llc2-sessions command BR-781

max-lsp-lifetime command P2R-395

max-rcv-btu-size command BR-632

M-bit

: X.25 more data bit WR-345, WR-362

MCI interface card

: loopback on serial IR-135
: pulsing DTR signal DR-251, IR-170

MD5 authentication

: IP Enhanced IGRP P1R-313
: on TCP connections between BGP peers P1R-407
: OSPF P1R-242
: RIP P1R-489

mdl command IR-149

MDS

: See IP multicast routing, MDS

media-type command IR-151

members command DR-24

memory usage

: Certification Authority Interoperability SR-372

memory-size iomem command FR-283

menu (EXEC) command FR-22

menu clear-screen command FR-23

menu command FR-24

: resume FR-25

menu default command FR-26

menu line-mode command FR-28

menu options command FR-29

menu prompt command FR-30

menu single-space command FR-31

menu status-line command FR-32

menu text command FR-33

menu title command FR-35

menu-exit command FR-27

message

: front panel LED display FR-235
: specifying front panel LED FR-254

Message Digest 5 (MD5) authentication

: See MD5 authentication

message identifier

: See MID

message logging

: console FR-507
: enabling FR-517
: history table size FR-513
: monitor FR-516
: SNMP trap FR-511
: UNIX syslog server FR-505

message queue length

: SNMP FR-472

message-of-the-day banner

: See MOTD banner

messages

: busy FR-139
: displaying debug FR-99
: Echo, ICMP P1R-74, P1R-79
: failed connection DR-366, FR-129
: length FR-140
: line activation, displaying FR-122
: line-in-use FR-139
: login DR-366, DR-415, FR-129
: redirecting system error FR-517
: sending to other terminals FR-140
: successful connection DR-366, DR-415, FR-129
: vacant terminal FR-145
: See also banners; message logging

metric adjustments, ISO IGRP P3R-263

metric holddown command P1R-227

metric maximum-hops command P1R-228

metric weights command P1R-229, P1R-319, P3R-263

metrics

assigning for redistribution P1R-204, P1R-256, P1R-384

IP Enhanced IGRP, adjusting P1R-223, P1R-307

routing

: Net/One P3R-355, P3R-391
: VINES P3R-72, P3R-80
: XNS P3R-355, P3R-391

MIB

: Cisco Round-Trip Time Monitor FR-393
: RMON FR-386, FR-390

microcode

: loading Cisco IOS image FR-248
: loading from Flash memory FR-246
: reloading FR-250

microcode (Cisco IOS image) command FR-248

microcode command FR-246

microcode reload command FR-250

MID

: per VC (example) WR-24

mid command WR-78

minimum-memory command BR-633

MIP

: CT3IP external port IR-351

mkdir command FR-184

mls rp ip command XR-96

mls rp management-interface command XR-97

mls rp nde-address command XR-98

mls rp vlan-id command XR-99

mls rp vtp-domain command XR-100

MLSP XR-96

mobile remote node DR-486

mode

: framed DR-252, IR-364
: unframed DR-252, IR-364

mode command SR-339, VR-46

modem

chat script DR-672, DR-881

dialer hold queue DR-688

EC/compression DR-881

scripts (examples) DR-884

settings

: AUX (table) DR-882
: EC/compression (table) DR-881
: platform-specific (table) DR-882

troubleshooting DR-884

modem answer-timeout command DR-79, DR-186

modem at-mode command DR-80

modem at-mode-permit command DR-82

modem attributes DR-51

modem autoconfigure command DR-83

modem autoconfigure discovery command DR-83

modem autoconfigure type command DR-84

modem autotest command DR-85

modem bad command DR-88

modem buffer-size command DR-90

modem busyout command DR-91

modem callin command DR-25

modem callout command DR-26, DR-36

modem chat scripts

: DDR DR-672
: default DR-672

modem country mica command DR-93

modem country microcom_hdms command DR-96

modem cts-required command DR-36

: See modem printer command

modem dialin line command DR-28

modem dtr-active command DR-29

modem hold-reset command DR-99

modem inout command DR-31

modem poll retry command DR-101

modem poll time command DR-102

modem printer command DR-32

modem reconnection, forcing a waiting period DR-813

modem recovery action command DR-103

modem recovery maintenance command DR-104

modem recovery threshold command DR-106

modem recovery-time command DR-107

modem ri-is-cd command

: See modem dialin line command

modem shutdown command DR-108

modem startup-test command DR-110

modem status-poll command DR-111

modem, specifying capabilities of DR-113

modemcap edit command DR-112

modemcap entries, using templates to join DR-52

modemcap entry command DR-113

modem-pool command DR-114

modes

ca-identity

: enabling SR-377

certificate chain configuration

: enabling SR-370

query

: enabling SR-372

: enabling SR-384

N

Name Binding Protocol

: See AppleTalk, NBP

name caching

: enabling for NetBIOS BR-122

name command BR-784

name display facility

AppleTalk P2R-72

: configuring P2R-63

name elan-id command XR-154

name local-seg-id command XR-156

name mapping

CLNS

: NETs P3R-212
: NSAPs P3R-212

name preempt command XR-155

name server-atm-address command XR-157

name-connection command FR-138

named IP access list P1R-141

named IPX access lists P2R-248

named-key command SR-419

NASI

: clients, enabling DR-754
: connection status, displaying DR-755
: TTY lines, connecting through DR-754
: VTY lines, connecting through DR-754

nasi authentication command SR-34

using list-names

: (caution) SR-34

NAT

: clearing translations P1R-10
: enabling P1R-40
: inside destination address translation P1R-42
: inside source address translation P1R-44
: outside source address translation P1R-46
: pool of addresses, defining P1R-48
: statistics, displaying P1R-92
: translations, displaying P1R-94

national bit command IR-156

Native Client Interface Architecture

: See NCIA

NBF, viewing sessions DR-55

NBMA network

: mapping IP-to-NBMA addresses P1R-56
: mapping IPX-to-NBMA addresses P2R-308
: network identifier P1R-59, P2R-310

NBP

access lists

: creating P2R-8
: other NBPs P2R-15

AppleTalk P2R-63, P2R-72

name registration table P2R-148

named entities P2R-8

packet type P2R-8

services, displaying P2R-146

tests P2R-197

NCIA

circuits

: clearing BR-728
: status information, displaying BR-737

client

: active connection, terminating BR-729
: configuring BR-732
: status information, displaying BR-738

registered client control block, releasing BR-730

server

: configuring BR-735
: RSRB ring, configuring BR-734
: starting and stopping BR-731
: status information, displaying BR-740

ncia client command BR-732

ncia command BR-731

ncia rsrb command BR-734

ncia server command BR-735

negative-caching command BR-634

neighbor command

: advertisement-interval P1R-395
: distribute-list P1R-399
: EGBP-multihop P1R-401
: EGP, IGRP, RIP P1R-231
: filter-list P1R-402
: IGRP, RIP P1R-211
: maximum-prefix P1R-404
: next-hop-self P1R-406
: OSPF P1R-273
: remote-as P1R-412
: route-map P1R-414
: update-source P1R-420
: version P1R-421
: weight P1R-422

neighbor database-filter command P1R-275

neighbor default-originate command P1R-396

neighbor description command P1R-398

neighbor password command P1R-407

neighbor peer-group command

: assigning members P1R-409
: creating P1R-410

neighbor route-reflector-client command P1R-415

neighbor send-community command P1R-417

neighbor soft-reconfiguration inbound command P1R-418

neighbor table, VINES

: deleting P3R-22
: displaying P3R-36
: static paths, creating P3R-75

net command P1R-352, P3R-265

Net/One

emulation mode P3R-378, P3R-391

hello packets P3R-355, P3R-391

metrics, routing P3R-355, P3R-391

routing

: enabling P3R-378, P3R-391
: updates P3R-391

NetBEUI

: connection information, displaying DR-55
: remote node, configuring DR-34

NetBIOS

IPX, filtering messages P2R-298, P2R-300

session table

: global DR-55
: interface DR-55

netbios access-list bytes command BR-118

netbios access-list command P2R-397

netbios access-list host command BR-120

netbios enable-name-cache command BR-122

netbios input-access-filter bytes command BR-123

netbios input-access-filter host command BR-124

netbios name-cache command BR-125

netbios name-cache name-len command BR-127

netbios name-cache proxy-datagram command BR-128

netbios name-cache query-timeout command BR-129

netbios name-cache recognized-timeout command BR-130

netbios name-cache timeout command BR-131

netbios nbf command DR-34

netbios output-access-filter bytes command BR-132

netbios output-access-filter host command BR-133

NetBIOS, IBM

access list filter

: assigning to interface BR-123, BR-124
: defining for outgoing messages BR-132, BR-133

byte offset access lists BR-190

byte offsets, configuring BR-118

cache, displaying entries in BR-160

clearing dynamically learned names BR-95

name caching

: configuring the "dead time" for BR-129, BR-130
: defining a static entry BR-125
: enabling BR-122, BR-131

NetFlow Switching

description XR-14

exporting cache entries XR-9

flow switching XR-9

: enabling XR-13

netmask, definition P1R-52

NETs for CLNS

: algorithm for choosing P3R-216
: configuring P3R-265
: name mapping P3R-212
: static address, assigning P3R-216

NetWare Asynchronous Services Interface

: See NASI

NetWare Link Services Protocol

: See NLSP

Network Address Translation

: See NAT

network area command P1R-276

network command P2R-399

: backdoor P1R-425
: BGP P1R-424
: IGRP P1R-232, P1R-321
: RIP P1R-212

network configuration file FR-214

copying from a server using rcp FR-271

: example FR-277

default filename FR-222

: changing FR-214

loading from a server FR-222

network entity titles

: See NETs for CLNS

network management hub IR-134

network masks, format P1R-100

network service access point

: See NSAP

network services

: tailoring use of FR-529, FR-530

network timing services

: displaying information WR-144

network weight command P1R-426

network-clock base-rate command VR-48

network-clock-select command VR-49, WR-79

network-clock-switch command VR-51

network-id command XR-192

Network-to-Network Interface

: See NNI

Next Hop Resolution Protocol

: See NHRP

NHRP

: IPX

access lists P2R-307
authentication P2R-305
authoritative response P2R-306
cache clearing P2R-224
static entries P2R-308
cache, displaying P2R-435

NHRP (continued)

: controlling requests P2R-307
: dynamic cache entries P2R-224
: enabling P2R-310
: holdtime P2R-306
: initiation
: controlling P2R-314
: loop detection P2R-312, P2R-313
: network identifier P2R-310
: packet rate P2R-309
: record and reverse record options P2R-312
: requests, triggering P2R-314
: Responder Address option P2R-313
: security P2R-305
: server addresses P2R-311
: static IPX-to-NBMA address mapping P2R-308
: traffic statistics P2R-437
: triggering requests P2R-307

NHRP for IP

access list P1R-55

authentication P1R-53

authoritative response P1R-54

cache, clearing

: dynamic entries P1R-12
: static entries P1R-56

cache, displaying P1R-96

enabling P1R-59

holdtime P1R-54

initiation, controlling P1R-65

loop detection P1R-61, P1R-62

multipoint tunnel P1R-107

network identifier P1R-59

Next Hop Server address P1R-60

packet rate P1R-58

record and reverse record options, suppressing P1R-61

requests, triggering P1R-55, P1R-65

Responder Address option P1R-62

security P1R-53

server-only mode P1R-63

static IP-to-NBMA address mapping P1R-56

SVC set-up and teardown

: thresholds P1R-64
: time interval P1R-17

traffic statistics, displaying P1R-98

tunnel mode command P1R-107

NLSP

area network numbers, setting P2R-219

CSNP interval, specifying P2R-316

database, displaying P2R-438

default routes

: advertising P2R-255
: specifying P2R-263

designated router

: specifying election priority P2R-325

disabling on an interface P2R-317

enabling P2R-354

: on an interface P2R-317

filters

: route updates P2R-238

GNS queries, replying to P2R-272

hello interval, specifying P2R-319, P2R-321

holddown period between partial route calculations, controlling P2R-412

hop count, maximum from RIP updates P2R-295

internal network number

: definition P2R-287
: setting P2R-287

IPX

: SPF log P2R-443

link delay, specifying P2R-293

logging adjacency changes P2R-389

LSP

: generation interval P2R-392
: MTU, maximum size P2R-393
: refresh interval P2R-394
: retransmission interval, specifying P2R-326
: setting maximum lifetime P2R-395
: transmission interval P2R-322

metric, specifying P2R-323

multicast addressing

: interface configuration P2R-324
: router configuration P2R-396

neighbors, displaying P2R-441

redistribution P2R-413

RIP entries, aging out P2R-343

RIP packets

: maximum size P2R-342
: processing P2R-327

SAP entries

: aging P2R-368

SAP packets

: maximum size P2R-367
: processing P2R-328

shortest path first algorithm (SPF) calculation interval, controlling P2R-459

subinterfaces P2R-302

: configuring (example) P2R-303

throughput, specifying P2R-375

NNI

and DCE

: error threshold WR-202
: monitored events count WR-204
: polling verification timer WR-206

and DTE

: error threshold WR-203
: monitored events count WR-205

Frame Relay PVC switching

interface type WR-190

no form of a command

: using FR-xxii

no ip inspect command SR-203

no menu command FR-37

node name, changing LAT DR-392

node-row command BR-636

nonbroadcast multiaccess network

: See NBMA network

non-linear command VR-137

non-return to zero inverted (NRZI)

: enabling DR-250

nonreturn-to-zero inverted

: See NRZI

nonvolatile RAM file compression FR-220

notes

: usage in text v

notify command DR-416, FR-77

Novell IPX

: See IPX

NRZI

: enabling IR-157

nrzi-encoding command DR-250, IR-157

NSAP

: address (example) WR-29
: ATM WR-28

NSAPs for CLNS

: cluster alias P3R-199
: media address mapping P3R-206, P3R-214
: name mapping P3R-212
: SNPA mapping P3R-206, P3R-214
: static address assignment P3R-216
: TID mapping P3R-336

NSSA P1R-246

ntp access-group command FR-631

ntp authenticate command FR-633

ntp authentication-key command FR-634

ntp broadcast client command FR-637

ntp broadcast command FR-636

ntp broadcastdelay command FR-638

ntp clock-period command FR-639

ntp disable command FR-640

ntp master command FR-641

ntp peer command FR-643

ntp server command FR-645

ntp source command FR-647

ntp trusted-key command FR-648

ntp update-calendar command FR-649

null bytes

: end of string FR-78, FR-101

null-xid-poll command BR-638

num-exp command VR-52

NVRAM file compression FR-220

O

o command FR-316

Oakley key exchange protocol

: See IKE

OAM

ATM

: cell flush (example) WR-30

oam retry command WR-83

oam-pvc command WR-81

oam-svc command WR-85

ODR

: enabling P1R-198

offload (backup) command BR-788

offload command BR-785

offset-list (IGRP) command P1R-233

offset-list (IP Enhanced IGRP) command P1R-322

offset-list (RIP) command P1R-213

offsets

: applying P1R-214
: IP Enhanced IGRP P1R-233, P1R-322
: RIP P1R-213

oid command FR-689

On-Demand Routing

: See ODR

on-hook detection WR-51

online documentation

: See CCO

open connections, displaying DR-487, DR-565

Open Shortest Path First (OSPF) protocol

: See OSPF

operation command VR-138

Organizational Unique Identifier

: See OUI code

OSI

: See ISO CLNS

OSPF

address range for a single route, specifying P1R-247

aggregate addresses, creating P1R-299

area ID P1R-276

authentication for an area, enabling P1R-242

auto cost P1R-278

broadcasts

: over Frame Relay WR-209
: over X.25 BR-87, BR-469, WR-353

consolidate routes at a boundary P1R-247

cost P1R-260

cost to the default external route, assigning P1R-244

database, displaying information P1R-285

dead interval P1R-262

default metric values, setting P1R-256

default metrics P1R-278

default route, generate P1R-254

default summary route cost P1R-244

OSPF (continued)

: demand circuit P1R-263
: designated router P1R-270
: distances P1R-257
: DNS names P1R-267
: enabling P1R-281
: hello interval P1R-264
: hello packet interval P1R-262
: ignore MOSPF LSA packets P1R-279
: interface information, displaying P1R-294
: interfaces P1R-276
: IRDP advertisements to multicast address, sending P1R-36
: link state advertisement retransmissions P1R-271
: LSA group pacing P1R-301
: MD5 authentication P1R-265
: MOSPF packets, ignoring P1R-279
: neighbor information, displaying P1R-296
: neighbor state changes, viewing P1R-280
: network type P1R-268
: not so stubby area P1R-246
: NSSA P1R-246
: over X.25 network WR-351
: password P1R-259
: priority of router P1R-270
: retransmit interval P1R-271
: route calculation timers, configuring P1R-302
: routers interconnecting to nonbroadcast networks P1R-273
: routing processes, displaying information P1R-282
: routing table entries, displaying P1R-284
: stub area, defining P1R-249
: summarize routes at a boundary P1R-247
: timers P1R-302
: transmit delay P1R-272
: virtual link P1R-251
: virtual links, displaying P1R-298

ospf auto-cost command P1R-278

ospf ignore lsa mospf command P1R-279

ospf log-adj-changes command P1R-280

OUI code

: choosing type to use over translational bridges BR-60, BR-99

output attenuation command VR-139

output notification

: configuring for session FR-100
: setting for line FR-77

output-delay command P1R-214

outstanding frames, LAPB

: acknowledgment (modulo parameter) WR-296
: maximum number (window parameter) WR-295

owner command FR-382

owning-cp command BR-639

P

P1024B protocol BR-914

packet

compressed packet-by-packet BR-87, BR-469, WR-352

compressed TCP header WR-357

maximum size, establishing FR-470

SNMP, filtering FR-470

X.25

: acknowledgment, configuring WR-394
: input, setting size of WR-345
: output, setting size of WR-362

packet assembler/disassembler

: See PAD

packet dispatch character

: changing for session FR-90
: setting for line FR-65

packet lifetime

: ISO CLNS P3R-218

packet-by-packet compression

: X.25 BR-87, BR-469, WR-352

PAD

: connections between devices DR-561, WR-303, WR-363
: Macintosh connecting through DR-509, DR-518, DR-527
: mapping WR-359
: parameters, changing DR-557 -DR-559, DR-566
: profile scripts, creating WR-399
: See also X.3 PAD

pad command DR-554

PAD profile scripts DR-550

padding

: changing for session FR-101
: configuring for line FR-78

padding command FR-78

PAP

: authentication method DR-590

parallel paths

: Apollo Domain P3R-5
: IPX, choosing between P2R-296
: XNS P3R-383

parallel router P1R-15

parameter-setting command DR-894

parentheses

: using in regular expressions DR-906

parity

: changing for session FR-102
: setting for line FR-79

parity command FR-79

partition command FR-284

partition flash command FR-284

passive-interface command P1R-511

Password Authentication Protocol

: See PAP

password command DR-179, SR-438

passwords

assigning for a line DR-179

clear-text version DR-654

IS-IS

: area, configuring P3R-186
: domain, assigning P3R-237
: interface, setting P3R-249

IS-IS for IP

: area, assigning on P1R-336
: authentication P1R-336
: domain, assigning on P1R-338
: interface, assigning on P1R-347

LNM, setting for BR-108

path command BR-790

Path MTU Discovery

: enabling P1R-157
: RFC 1191 P1R-157

paths

: selection, DECnet P3R-139
: source-route bridging, modifying default cost for BR-194
: transparent bridging, modifying default cost for BR-38

paths-of-statistics-kept command FR-383

pattern matching

: See regular expressions

pattern matching symbols, LAT (table) DR-384

PDUs, error

: See ERPDU

PDUs, redirect

: See RDPDU

peer default ip address command DR-587, DR-633

peer neighbor routes

: dialer interface, effect on DR-589

peer neighbor-route command DR-589

perfect forward secrecy

: See PFS

Performance Data Collection

: configuring FR-693
: enabling FR-683
: SNMP data FR-705, FR-720
: transfer method FR-724

period (.) character

: ping command output FR-524

permanent rate queues

ATM

: (example) WR-34
: configuring WR-33

permanent virtual circuit

: See PVC

permit (extended) command P2R-400

permit (reflexive) command SR-156

permit (SAP filtering) command P2R-405

permit (standard) command P2R-407

permit (summary) command P2R-403

permit command P1R-164, SR-273

IPX

: extended P2R-400
: SAP filtering P2R-405
: standard P2R-407
: summary P2R-403

PFS

: specifying SR-343

Phase IV/Phase V, DECnet, designing network P3R-127

physical-layer command DR-35, IR-158

PIM

: See IP multicast routing, PIM

ping (privileged) command FR-523

ping (user) command FR-526

ping command FR-214, P1R-646

AppleTalk

: privileged P2R-109
: unprivileged P2R-111
: verbose mode P2R-110

DECnet

: privileged P3R-163
: user P3R-165

: privileged P1R-74
: user P1R-79

IPX

: privileged P2R-409
: test characters (table) P2R-409
: unprivileged P2R-411

ISO CLNS

: privileged P3R-266
: user P3R-269

LAPB T1 value, determining WR-301

specify Internet header options P1R-75

test characters (table) FR-523, FR-526

test connectivity FR-523, FR-526

VINES P3R-25

XNS

: privileged P3R-361
: test characters (table) P3R-361, P3R-363
: user P3R-363

PKI protocol

: See CEP

playout-delay command VR-141

plus character in regular expressions DR-904

point-to-multipoint signaling

ATM

: (example) WR-27

Point-to-Point Protocol

: See PPP

policy propagation via BGP QR-4

policy routing

based on address P1R-496

based on packet length P1R-502

enabling P1R-518

local P1R-481

: route map, identifying P1R-481

route map, identifying P1R-483

to a default next hop P1R-528

to a next hop P1R-530

to an interface P1R-526

to default interface P1R-524

poll bit, sending for LLC2 BR-389

poll timer

: ATM (example) WR-150

poll-interval command FR-691

pool-range command DR-116

Poor Man's Routing

: DECnet P3R-133

port command IR-159, VR-53

APPN

: connection network BR-640
: link station BR-641

port numbers

: TCP services (table) QR-26
: UDP services (table) QR-26

port numbers, Telnet DR-36

port queue

: retry interval FR-103

pos flag command IR-160

pos framing command IR-161

pos internal-clock command

: See clock source (CT3IP) command

pos report command IR-163

pos scramble-atm command IR-165

pos threshold command IR-167

PPP DR-635 -DR-636

APPN remote SAP, specifying BR-642

authentication

: CHAP or PAP, order requested DR-590
: incoming calls only DR-590
: remote CHAP, common secret DR-597
: remote PAP, username sent DR-603

BACP DR-781 -DR-803

: callback configuration DR-783
: dialer load threshold DR-790
: dropping links, no response DR-785
: links, removing from multilink bundle DR-785
: retransmissions, setting limits DR-788
: telephone number negotiation DR-791
: telephone number, local, configuring DR-791
: transmit queue threshold DR-790
: type of link, adding or dropping DR-787

callback

: enabling on non-DTR dialer interface DR-809
: secure DR-806

CHAP

: common hostname DR-596
: common secret DR-597

client, calling back DR-814

common secret, remote CHAP authentication DR-597

compression IR-51

encapsulation IR-72

: changing dynamically DR-258, DR-338
: enabling on interface DR-578

IPX packet compression over DR-630

Multilink PPP

: enabling for BACP DR-796

PAP

: remote authentication (example) DR-603
: remote, username and password sent DR-603

session, automatic startup DR-620

wide-area networking DR-575 -DR-616

ppp authentication command DR-590, SR-36

CHAP DR-590

PAP DR-590

using list-names

: (caution) SR-36

ppp authorization command SR-62

ppp bap call command DR-782

ppp bap callback command DR-783

ppp bap drop command DR-785

ppp bap link types command DR-787

ppp bap max command DR-788

ppp bap monitor load command DR-790

ppp bap number command DR-791, DR-866

ppp bap timeout command DR-794

ppp bridge appletalk command DR-592

ppp bridge ip command DR-593

ppp bridge ipx command DR-594

ppp callback command DR-313, DR-808, DR-809, DR-814

ppp chap hostname command DR-596, SR-38

ppp chap password command DR-597, SR-39

ppp chap refuse command SR-40

ppp chap wait command SR-41

ppp command DR-635

ppp multilink command DR-599

: BACP, enabling DR-796

ppp multilink fragment-delay command DR-601

ppp multilink idle-link command DR-869

ppp multilink interleave command DR-602

ppp pap sent-username command DR-603, SR-42

ppp quality command DR-605

ppp use-tacacs command SR-44

single-line option

: (caution) SR-44

ppp use-tacacs translate option

: mapping to virtual interface template command DR-515, DR-536

ppp-dest-address command BR-642

prc-interval command P2R-412

predictor compression DR-576, IR-51

predictor compressor DR-240

preference command VR-55

preferred routes

: specifying with ISO IGRP P3R-273

preferred-nnserver command BR-792

prefix command VR-56

pri-group command DR-315, IR-169

pri-group timeslots nfas_d command DR-351

primary address

: IP, setting P1R-14

primary SDLC station, configuring routing device as BR-377

printer command (LPD) FR-80

priority group, assigning BR-337

priority list, assigning QR-21

priority queueing

: configuration information, displaying QR-76
: establishing QR-25
: packet limits (table) QR-29
: priority levels (table) QR-26

priority-group command BR-212, BR-337, QR-21

priority-list command BR-208, BR-213

priority-list default command QR-22

priority-list interface command QR-23

priority-list protocol bstun command BR-339

priority-list protocol command QR-25

priority-list protocol ip tcp command BR-340

priority-list queue-limit command QR-29

priority-list stun address command BR-342

private command FR-82

privilege level (line) command SR-441

privileged EXEC mode

: entering FR-8
: summary FR-xxi

probes

: See RTR

prompt

: customizing FR-650

prompt command FR-650

prompts

: system FR-xxi

propagation-delay command

: APPN link station BR-643
: APPN port BR-644

protocol addresses

: mapping (example) WR-63

protocol command WR-87

protocol groups, creating BR-362

protocol numbers

: IPX (table) P2R-208

protocol translation

global options DR-511, DR-520, DR-529, DR-535

: LAT DR-514
: TCP DR-524
: X.25 DR-535

global translation options DR-511, DR-520, DR-529

LAT options DR-519, DR-528

outgoing options, mapping to virtual interface template commands DR-515, DR-536

SLIP and PPP options DR-510, DR-519, DR-528

Telnet DR-509, DR-517, DR-523, DR-528

Telnet/TCP DR-509, DR-517, DR-523, DR-528

Telnet/TCP options DR-517, DR-523

X.25 options DR-509, DR-519

Protocol-Independent Multicast

: See IP multicast routing, PIM

protocols

: selecting terminal transport DR-468

proxy explorers

: configuring BR-185
: enabling for NetBIOS name caching BR-122

proxy network numbers

: assigning P2R-77

proxy, configuring for LAT DR-405

pseudobroadcasting

: SMDS static map WR-280

pu command

: DLUR BR-795

pu command (direct) BR-793

public key configuration mode

: enabling SR-410, SR-419

pulse-time command DR-251, IR-170

pu-type-20 command BR-646

PVC

ATM

: discovery (example) WR-19

resetting XOT WR-288

X.25

: address maps, displaying WR-316
: encapsulation, establishing WR-364
: HIC WR-337
: HOC WR-338
: HTC WR-342
: LIC WR-346
: LOC WR-348
: LTC WR-349
: serial interfaces on (example) WR-368
: states WR-327
: switched WR-367
: switched options (table) WR-370
: tunneled WR-372

pvc command WR-90

pwd command FR-187

Q

QLLC

APPN

: configuring BR-712
: partner node, specifying BR-711

configured for DLSw BR-468, BR-471

data link

: defining, SNA host BR-534
: enabling, SNA BR-529

qllc accept-all-calls command BR-430

qllc dlsw command BR-287

qllc npsi-poll command BR-433

qllc partner command BR-434

qllc sap command BR-436

qllc srb command BR-438

qllc xid command BR-440

QoS group ID QR-50

Qualified Logical Link Control

: See QLLC

query mode

: enabling SR-372

query url command SR-389

question command FR-xvii

queue

: byte count QR-37
: custom QR-5
: length limit QR-38
: maximum packets QR-29
: packet priorities QR-23, QR-33
: priorities, assigning QR-31
: priority QR-22
: protocol priorities QR-25, QR-35
: status QR-76
: weighted fair queueing QR-7

queue size

: exponential weight factor QR-41

queued host-initiated connections

: deleting entries from, LAT DR-367

queue-list default command QR-31

queue-list interface command QR-33

queue-list protocol bstun command BR-344

queue-list protocol command QR-35

queue-list protocol ip tcp command BR-346

queue-list queue byte-count command QR-37

queue-list queue limit command QR-38

queues

: holding packets for modem connection DR-688
: length, SNMP trap queues FR-472

queuing priorities

BSTUN

: based on header BR-339
: based on TCP port BR-340

configuring BR-210, BR-213

STUN

: based on a TCP port BR-340
: based on address BR-342

R

R2 signaling DR-265

RA mode

: enabling SR-384

radius-server attribute nas-port extended command SR-82

radius-server configure-nas command SR-83

radius-server dead-time command SR-84

radius-server extended-portnames command SR-85

radius-server host command SR-86

radius-server host non-standard command SR-88

radius-server key command SR-90

radius-server optional passwords command SR-89

radius-server retransmit command SR-92

radius-server timeout command SR-93

radius-server vsa send command SR-94

RAND compression algorithm DR-240, DR-576, IR-51

random-detect command QR-39

random-detect exponential-weighting-constant command QR-41

random-detect precedence command QR-43

RARP

: router, configuring as server FR-342

RAs

configuration

: (example) SR-384

enabling SR-384

rate-limit command QR-46

raw queue size

ATM

: (example) WR-35
: configuring WR-35

rcp

: configuring FR-346, FR-350
: copying files FR-345
: DNS, enabling security FR-344
: remote username FR-308

RDPDU

: configuring for sending, ISO CLNS P3R-230
: interval to disable P3R-219

Real-time Transport Protocol

: Multilink PPP interleaving DR-585

rearranging entries in BOOT environment variable FR-308

receive buffers

: setting for host, LAT DR-389
: setting for server, LAT DR-396

receiver not ready (RNR) frames BR-388

receiver ready (RR) frames BR-384, BR-388

Recognized Operating Agencies lists

: See ROA lists

Recognized Operating Agency

: See X.25, ROA

redirect messages, VINES P3R-79

redirect protocol data unit

: See RDPDU

redistribute command P1R-513, P2R-413, P3R-271

redistribute static clns command P3R-271

redistribute static ip command P1R-513

redistribution

AppleTalk

: Enhanced IGRP P2R-82

assigning metrics for P1R-204, P1R-256, P1R-384

IP Enhanced IGRP

: metrics for P1R-223, P1R-307
: of default routes P1R-222, P1R-306

: IP address P1R-518
: one routing domain into another P1R-513
: See also IP, redistribution

IPX Enhanced IGRP P2R-413

IS-IS P3R-271

ISO IGRP P3R-271

match criteria

: address P3R-257
: interface P3R-260
: metric P3R-261
: next-hop P3R-258
: route source P3R-259
: route-type P3R-262
: See also IP, redistribution

NLSP P2R-413

one protocol to another P1R-517

routes, using same metric value P1R-204, P1R-256, P1R-384

routing information P1R-430, P1R-434, P3R-259

set criteria

: level P3R-276
: metric P3R-278
: metric-type P3R-280
: tag P3R-281

using route maps P1R-430, P1R-434

S

safe-store-cycle command BR-655

safe-store-host command BR-656

safe-store-interval command BR-657

samples command FR-693

samples-of-history-kept command FR-402

SAP

access list, named P2R-248

broadcast, sending P2R-387

definition P2R-205

delay between packets

: setting on a single interface P2R-334
: setting on all interfaces P2R-261

filters

: creating P2R-213, P2R-285, P2R-336

maximum queue length, setting P2R-369

table, adding static entries P2R-361

triggered updates, setting delay between packets on a single interface P2R-378

update interval, setting P2R-385

updates P2R-363

sap-priority command BR-217

sap-priority-list command BR-218

SAs

lifetimes

: configuring SR-417

parameters SR-405

viewing SR-423

: (example) SR-423

saving configuration changes FR-xxii

scheduler allocate command FR-652

scheduler-interval command FR-653

SCI cards

: loopback on IR-135

scramble command IR-172

scrambling

DS3

: (example) WR-10

screen

length

: changing for session FR-98
: setting for line FR-73

output, pausing FR-71

width

: changing for session FR-118
: setting for line FR-119

script activation DR-38

script arap-callback command DR-815

script callback command DR-817

script connection DR-40

script dialer command DR-672

: regular expressions DR-902

script reset command DR-42

script startup command DR-44

SDLC

APPN

: configuring BR-659
: partner node, specifying BR-658

broadcast, enabling BR-348

configuring routing device

: as a primary SDLC station BR-377
: as a secondary SDLC station BR-379

interface information, displaying BR-422

local acknowledgment for STUN, enabling BR-362, BR-369

maximum incoming frame size, setting BR-402

multidrop configuration BR-412

secondary descriptions (table) BR-451

secondary stations, assigning to serial link BR-394

T1 timer BR-417

sdlc address command BR-394

sdlc address FF ack-mode command BR-395

sdlc dlsw command BR-289, BR-396

sdlc dte-timeout command BR-397

sdlc frmr-disable command BR-398

sdlc holdq command BR-399

sdlc k command BR-400

sdlc n1 command BR-402

sdlc n2 command BR-403

sdlc partner command BR-404

sdlc poll-limit-value command BR-405

sdlc poll-wait-timeout command BR-409

sdlc qllc-prtnr command BR-411

sdlc role command BR-412

sdlc simultaneous command BR-415

sdlc slow-poll command BR-416

sdlc t1 command BR-417

sdlc test serial command BR-418

sdlc virtual multidrop command BR-348

sdlc vmac command BR-420

sdlc xid command BR-421

sdlc-dest-address command BR-658

sdlc-sec-addr command BR-659

SDLLC

: device-initiated connections, enabling BR-442
: enabling use of BR-447
: local acknowledgment, enabling BR-467
: on serial interfaces, configuring BR-447

sdllc partner command BR-442

sdllc ring-largest-frame command BR-444

sdllc sap command BR-445

sdllc sdlc-largest-frame command BR-446

sdllc traddr command BR-447

sdllc xid command BR-449

SDP

: system controller FR-709

secondary address, IP, using P1R-14

secondary networks, IPX P2R-301

secondary SDLC stations

: assigning to serial link BR-394
: configuring routing device as a BR-379

security

: See access lists, IP; authentication; IPSO; lock-and-key access; RIP, IP authentication

security associations

: See SAs

security command

APPN

: link station BR-660
: port BR-661

selective acknowledgment

: TCP P1R-159

send command FR-140

send-lifetime command P1R-520

serial device

: location, setting FR-74

serial interfaces

: clearing IR-34
: DTR signal pulsing DR-251, IR-170
: LAT compression BR-30
: loopback IR-135
: low-speed IR-158
: low-speed, Cisco 2520 through 2523 routers DR-35
: media type IR-151
: monitoring synchronous IR-310

Serial Line Internet Protocol

: See SLIP

server connections

: LAT DR-382 -DR-383
: PPP DR-635 -DR-636
: rlogin DR-419, DR-421 -DR-460
: SLIP DR-639 -DR-640
: Telnet DR-458 -DR-461
: TN3270 DR-469
: XRemote DR-488, DR-492, DR-496

service advertisement timer DR-407

Service Advertising Protocol

: See SAP

service announcements, reenabling LAT DR-397

service compress-config command FR-220

service config command FR-214, FR-222

service decimal-tty command FR-654

service exec-callback command DR-818

service exec-wait command FR-655

service finger command FR-656

service hide-telnet-address command FR-657

service linenumber command FR-141

service nagle command FR-658

service old-slip-prompts command DR-637

service pad command DR-561, WR-303

service pad from-xot command WR-305

service pad to-xot command WR-306

service password-encryption command SR-443

security level

: (caution) SR-443

service prompt config command FR-659

service pt-vty-logging command DR-498

service slave-log command FR-528

service tcp-keepalives-in command FR-529

service tcp-keepalives-out command FR-530

service tcp-small-servers command FR-660

service telnet-zero-idle command FR-661

service timestamps command FR-531

service types

: AppleTalk (table) P2R-63
: IPX (table) P2R-214

service udp-small-servers command FR-662

service-any command BR-662

service-module 56k clock rate command IR-173

service-module 56k clock source command IR-175

service-module 56k data-coding command IR-176

service-module 56k network-type command IR-177

service-module 56k remote-loopback command IR-179

service-module 56k switched-carrier command IR-180

service-module t1 clock source command IR-181

service-module t1 data-coding command IR-182

service-module t1 fdl command IR-183

service-module t1 framing command IR-184

service-module t1 lbo command IR-185

service-module t1 linecode command IR-186

service-module t1 remote-alarm-enable command IR-187

service-module t1 remote-loopback command IR-188

service-module t1 timeslots command IR-190

Service-Specific Connection-Oriented Protocol

: See SSCOP

serving-nn command BR-663

Session Directory Protocol

: See IP multicast routing, sdr

session protocol command VR-58

session target command VR-59

session-limit command DR-181

sessions, limiting number per line DR-181

session-timeout command DR-182

set algorithm 40-bit-des command SR-278

set algorithm des command SR-280

set as-path command P1R-428

set automatic-tag command P1R-522

set card-message command FR-254

set community command P1R-430

set dampening command P1R-432

set default interface command P1R-524

set interface command P1R-526

set ip default next-hop command P1R-528

set ip next-hop command P1R-530

set ip precedence command P1R-532, QR-48

set ip qos-group command QR-50

set level command P1R-534, P3R-276

set local-preference command P1R-536

set metric command P3R-278

set metric command (IP Enhanced IGRP) P1R-235, P1R-324

set metric command (protocol-independent) P1R-538

set metric-type command P1R-540, P3R-280

set metric-type internal command P1R-434

set next-hop command P1R-542

set origin command P1R-436, P1R-544

set peer command SR-282, SR-341

set pfs command SR-343

set security-association level per-host command SR-345

set security-association lifetime command SR-347

set session-key command SR-350

set tag command P1R-546, P3R-281

set transform-set command SR-353

set weight command P1R-438

setenv command DR-489, DR-491

set-overload-bit command P1R-355

setup command

: See setup command facility

setup command facility

asynchronous interfaces

: configuration (examples) FR-51 -FR-52
: default client IP address (examples) FR-51 -FR-52

configuration

: (example) FR-50 -FR-54

configuration command script

: (example) FR-52

configuration file, saving FR-49, FR-54

entering FR-48

entering after erasing configuration FR-49

global parameters

: configuration (example) FR-50

interface parameters

: configuration (example) FR-50 -FR-54

interface summary, viewing FR-50

prerequisite knowledge FR-48

sample configuration FR-50 -FR-54

System Configuration Dialog FR-48

: (example) FR-50
: returning to privileged EXEC prompt FR-49

terminating the configuration FR-50

sgbp group command DR-768

sgbp member command DR-769

sgbp seed-bid command DR-771

shelf

: attributes FR-703, FR-722, FR-723
: discovered FR-697
: managed polling FR-707
: starting a session on FR-682
: type selection FR-695

shelf-type command FR-695

shortcut-frame-count command XR-193

shortcut-frame-time command XR-194

show (Flash file system) command FR-286

show access-lists command P1R-168, QR-51

show access-lists rate-limit command QR-53

show accounting command SR-73

show adjacency command XR-33

show aliases command FR-663

show alps ascu command BR-915

show alps circuits command BR-916

show alps peers command BR-918

show apollo arp command P3R-11

show apollo interface command BR-409, P3R-12

show apollo route command P3R-14

show apollo traffic command P3R-16

show appletalk access-lists command P2R-112

show appletalk adjacent-routes command P2R-114

show appletalk arp command P2R-116

show appletalk aurp events command P2R-118

show appletalk aurp topology command P2R-119

show appletalk cache command P2R-121

show appletalk domain command P2R-123

show appletalk eigrp interfaces command P2R-125

show appletalk eigrp neighbors command P2R-127

show appletalk eigrp topology command P2R-129

show appletalk globals command P2R-133

show appletalk interface command P2R-136

show appletalk macip-clients command P2R-140

show appletalk macip-servers command P2R-141

show appletalk macip-traffic command P2R-144

show appletalk name-cache command P2R-146

show appletalk nbp command P2R-148

show appletalk neighbors command P2R-127, P2R-150

show appletalk remap command P2R-153

show appletalk route command P2R-156

show appletalk sockets command P2R-161

show appletalk static command P2R-162

show appletalk traffic command P2R-164

show appletalk zone command P2R-170

show appn class-of-service command BR-664

show appn connection-network command BR-667

show appn directory command BR-669

show appn dlur-lu command BR-671

show appn dlur-pu command BR-673

show appn dlus command BR-675

show appn intermediate-session command BR-677

show appn link-station command BR-679

show appn mode command BR-682

show appn node command BR-683

show appn port command BR-685

show appn rtp command BR-688

show appn session command BR-690

show appn topology command BR-693

show aps command IR-191

show arap command DR-658

show arp command P1R-81, WR-93, WR-263

show async status command DR-46

show async-bootp command FR-357

show atm arp-server command WR-95

show atm class-links command WR-97

show atm interface atm command WR-98

show atm map command WR-101

show atm pvc command WR-103

show atm svc command WR-109

show atm traffic command WR-115

show atm vc command WR-117

show atm vp command WR-124

show bootflash command FR-287

show bootvar command FR-321

show bridge circuit group command BR-68

show bridge command BR-65

show bridge group command BR-70, IR-193

show bridge multicast command BR-71

show bridge vlan command BR-73

show bsc command BR-349

show bstun command BR-354

show buffers command FR-613, FR-664

show c2600 command FR-533

show c7200 command FR-536, VR-257

show cable burst-profile command VR-232

show cable modem command VR-234

show cable modulation-profile command VR-236

show cable privacy command VR-238

show cable qos command VR-240

show cable spectrum group command VR-241

show calendar command FR-669

show call active voice command VR-63

show call history voice command VR-67

show cdp command FR-404

show cdp entry command FR-405

show cdp interface command FR-407

show cdp neighbors command FR-408

show cdp traffic command FR-410

show cef command XR-35

show cef interface command XR-37

show cef linecard command XR-39

show ces circuit command WR-126

show ces interface cbr command WR-129

show ces status command WR-132

show clns cache command P3R-284

show clns command P3R-282

show clns es-neighbors command P3R-285

show clns filter-expr command P3R-287

show clns filter-set command P3R-288

show clns interface command P3R-289

show clns is-neighbors command P3R-291

show clns neighbors command P3R-293

show clns protocol command P3R-295

show clns route command P3R-298

show clns traffic command P3R-300

show clock command FR-670

show cmns command WR-307

show compress command IR-194

show configuration command

: See more command

show context command FR-539

show context command (for Cisco 2600 series routers) FR-537

show controllers (GRP image) command FR-541

show controllers (line card image) command FR-543

show controllers bri command DR-217

show controllers cable command VR-243

show controllers call-counters command DR-320, DR-322, DR-326, DR-328

show controllers cbus command IR-196

: Cisco 7000 IR-198
: Cisco 7500 IR-196

show controllers e1 command DR-317

show controllers ethernet command IR-201

show controllers fastethernet command IR-203

show controllers fddi command IR-206

show controllers lex command IR-207

show controllers logging command FR-548

show controllers mci command IR-209

show controllers pcbus command IR-211

show controllers pos command IR-212

show controllers serial command DR-324, IR-215

show controllers t1 command DR-324, IR-219

show controllers t3 command IR-222

show controllers tech-support command FR-549

show controllers token command BR-142, IR-229

show controllers vg-anylan command IR-234

show crypto algorithms command

: See show crypto cisco algorithms command

show crypto card command SR-284

show crypto cisco algorithms command SR-286

show crypto cisco connections command SR-287

show crypto cisco key-timeout command SR-289

show crypto cisco pregen-dh-pairs command SR-290

show crypto connections command

: See show crypto cisco connections command

show crypto engine brief command SR-293

show crypto engine configuration command SR-295

show crypto engine connections active command SR-297

show crypto engine connections dropped-packets command SR-299

show crypto ipsec sa command SR-355, SR-357

show crypto ipsec transform-set command SR-358

show crypto isakmp sa command SR-423

show crypto key mypubkey dss command SR-300

show crypto key mypubkey rsa command SR-425

show crypto key pubkey-chain dss command SR-301

show crypto key pubkey-chain rsa command SR-426

show crypto key-timeout command

: See show crypto cisco key-timeout command

show crypto mypubkey command

: See show crypto key mypubkey command
: See show crypto cisco pregen-dh-pairs command
: See show crypto key pubkey-chain dss command
: See show crypto key pubkey-chain dss name command
: See show crypto key pubkey-chain dss serial command

show dbconn license command BR-723

show dbconn ports command BR-724

show dbconn server command BR-725

show debugging command FR-550

show decnet accounting command P3R-169

show decnet command P3R-167

show decnet interface command P3R-171

show decnet map command P3R-175

show decnet neighbors command P3R-176

show decnet route command P3R-177

show decnet static command P3R-179

show decnet traffic command P3R-181

show dhcp command DR-608

show diag command FR-551, IR-236, VR-255

show diagbus command IR-238

show dialer command DR-221, DR-709, DR-733

: display for active connection DR-222, DR-712, DR-736
: display for DTR dialing DR-711, DR-735

show dialer interface async command DR-711, DR-735

show dialer interface bri command DR-221, DR-709, DR-733

show dialer map command DR-798

show dial-peer voice command VR-70

show dialplan incall number command VR-73

show dialplan number command VR-74

show dlsw capabilities command BR-290

show dlsw circuits command BR-292

show dlsw fastcache command BR-294

show dlsw peers command BR-295

show dlsw reachability command BR-298

show dlsw statistics command BR-301

show dnsix command SR-474

show drip command BR-203

show dspu command BR-526

show dxi map command WR-133

show dxi pvc command WR-134

show entry command DR-424

show environment command FR-553

show extended channel backup command BR-797

show extended channel cmpc command BR-798

show extended channel connection-map llc2 command BR-800

show extended channel csna command BR-801

show extended channel icmp-stack command BR-805

show extended channel ip-stack command BR-807

show extended channel lan command BR-810

show extended channel llc2 command BR-812

show extended channel max-llc2-sessions command BR-820

show extended channel packing names command BR-822

show extended channel packing stats command BR-824

show extended channel statistics command BR-826

show extended channel subchannel command BR-830

show extended channel tcp-connections command BR-835

show extended channel tcp-stack command BR-838

show extended channel tg command BR-841

show extended channel tn3270-serve pu lu command BR-862

show extended channel tn3270-server client-ip-address command BR-849

show extended channel tn3270-server command BR-846

show extended channel tn3270-server dlur command BR-853

show extended channel tn3270-server dlurlink command BR-855

show extended channel tn3270-server nailed-ip command BR-857

show extended channel tn3270-server pu command BR-859

show extended channel udp-listeners command BR-865

show extended channel udp-stack command BR-866

show file command

: See more command

show file descriptors command FR-191

show file information command FR-192

show file systems command FR-193

show flash command FR-287

show flash summary command FR-293

show flh-log command FR-256

: See more flh logfile command

show frame-relay ip rtp header-compression command P1R-647

show frame-relay ip tcp header-compression command WR-238

show frame-relay lapf command WR-240

show frame-relay lmi command WR-242

show frame-relay map command WR-244

show frame-relay pvc command WR-246

show frame-relay qos-autosense command WR-250

show frame-relay route command WR-252

show frame-relay svc maplist command WR-253

show frame-relay traffic command WR-256

show fras command BR-564

show fras map command BR-568

show fras-host command BR-566

show gsr command FR-566

show gt64010 command FR-567

show history command FR-38

show hosts command FR-143, P1R-82

show hub command IR-240

show interface cable command VR-247

show interface cable-signal quality command VR-252

show interface cbr command WR-136

show interface command BR-919, P3R-72

show interface stats command XR-111

show interface virtual-access command DR-500

show interfaces

: configuring interfaces IR-253
: custom queuing, output display IR-245
: disabled IR-247
: displaying configuration statistics IR-244
: displaying SDLC information IR-311

show interfaces accounting command IR-246

show interfaces atm command WR-139

show interfaces bri command DR-224

show interfaces cable sid command VR-253

show interfaces channel command BR-868

show interfaces command BR-422, BR-450, DR-198, DR-860, IR-243, QR-55

: channelized E1 DR-290
: channelized T1 DR-290
: clearing counters IR-30
: configuring interfaces WR-74
: DDR interface DR-712, DR-736

show interfaces crb command BR-74

show interfaces ethernet accounting command IR-248

show interfaces ethernet command IR-248

show interfaces fair-queue command QR-57

show interfaces fastethernet command IR-253

show interfaces fddi accounting command IR-262

show interfaces fddi command IR-262

show interfaces hssi command IR-270

show interfaces ip-brief command IR-275

show interfaces irb command BR-77

show interfaces lex command IR-276

show interfaces loopback command IR-281

show interfaces port-channel command IR-285

show interfaces pos command IR-289

show interfaces random-detect command QR-59

show interfaces rate-limit command QR-61

show interfaces serial accounting command IR-293

show interfaces serial command IR-293, WR-257, WR-309

show interfaces tokenring command BR-147, IR-315

show interfaces tunnel command IR-321

show interfaces vg-anylan command IR-325

show ip access-list command P1R-170

show ip accounting command P1R-171, SR-148

show ip aliases command P1R-84

show ip arp command P1R-85

show ip bgp cidr-only command P1R-443

show ip bgp command P1R-440

show ip bgp community command P1R-445

show ip bgp community-list command P1R-447

show ip bgp dampened-paths command P1R-449

show ip bgp filter-list command P1R-450

show ip bgp flap-statistics command P1R-452

show ip bgp inconsistent-as command P1R-454

show ip bgp neighbors command P1R-455

show ip bgp paths command P1R-460

show ip bgp peer-group command P1R-461

show ip bgp regexp command P1R-462

show ip bgp summary command P1R-463

show ip cache command XR-15

show ip cache flow command XR-17

show ip cef command QR-63, XR-41

show ip drp command P1R-174

show ip dvmrp route command P1R-649

show ip eigrp interfaces command P1R-326

show ip eigrp neighbors command P1R-328

show ip eigrp topology command P1R-330

show ip eigrp traffic command P1R-332

show ip igmp groups command P1R-650

show ip igmp interface command P1R-652

show ip inspect command SR-204

show ip interface command FR-159, IR-329, P1R-87, QR-64

show ip irdp command P1R-90

show ip local policy command P1R-549

show ip local-pool command DR-610

show ip masks command P1R-91

show ip mcache command P1R-654, XR-112

show ip mds forwarding command XR-114

show ip mds interface command XR-116

show ip mds stats command XR-117

show ip mds summary command XR-119

show ip mpacket command P1R-655

show ip mroute command P1R-657

show ip nat statistics command P1R-92

show ip nat translations command P1R-94

show ip nhrp command P1R-96

show ip nhrp traffic command P1R-98

show ip ospf border-routers command P1R-284

show ip ospf command P1R-282

show ip ospf database command P1R-285

show ip ospf interface command P1R-294

show ip ospf neighbor command P1R-296

show ip ospf virtual-links command P1R-298

show ip pim bsr command P1R-663

show ip pim interface command P1R-665

show ip pim interface count command XR-121

show ip pim neighbor command P1R-667

show ip pim rp command P1R-669

show ip pim rp-hash command P1R-671

show ip pim vc command P1R-672

show ip policy command P1R-551

show ip protocols command P1R-553

show ip redirects command P1R-99

show ip route command P1R-557

show ip route summary command P1R-561

show ip route supernets-only command P1R-562

show ip rpf command P1R-674

show ip rsvp installed command QR-67

show ip rsvp interface command QR-69

show ip rsvp neighbor command QR-70

show ip rsvp request command QR-71

show ip rsvp reservation command QR-72

show ip rsvp sender command QR-73

show ip rtp header-compression command P1R-675

show ip sdr command P1R-677

show ip tcp header-compression command P1R-175

show ip traffic command P1R-177

show ip traffic-engineering command XR-47

show ip traffic-engineering configuration command XR-50

show ip traffic-engineering routes command XR-52

show ip trigger-authentication command SR-46

show ip wccp command FR-161

show ip wccp web-caches command FR-163

show ipx access-list command P2R-418

show ipx accounting command P2R-419

show ipx cache command P2R-421

show ipx eigrp interfaces command P2R-422

show ipx eigrp neighbors command P2R-424

show ipx eigrp topology command P2R-426

show ipx interface command P2R-430

show ipx nasi connections command DR-755

show ipx nhrp command P2R-435

show ipx nhrp traffic command P2R-437

show ipx nlsp database command P2R-438

show ipx nlsp neighbors command P2R-441

show ipx nlsp spf-log command P2R-443

show ipx route command P2R-445

show ipx servers command P2R-449

show ipx spx-protocol command DR-757

show ipx spx-spoof command P2R-452

show ipx traffic command P2R-454

show isdn active command

: field descriptions (table) DR-229, DR-332, DR-354
: output display DR-228, DR-331, DR-353

show isdn command DR-228, DR-331, DR-353

show isdn history command

: field descriptions (table) DR-229, DR-332, DR-354
: output display DR-229, DR-332, DR-354

show isdn nfas group command DR-355

: field descriptions (table) DR-356

show isdn service command DR-358

: field descriptions (table) DR-333, DR-358
: output display DR-333

show isdn status command DR-349

: field descriptions (table) DR-335
: output display DR-333

show isis database command P1R-356, P3R-302

show isis routes command P3R-305

show isis spf-log command P1R-360, P3R-306

show kerberos creds command SR-135

show key chain command P1R-563

show keymap command DR-425

show lane bus command XR-163

show lane client command XR-165

show lane command XR-159

show lane config command XR-168

show lane database command XR-170

show lane default-atm-addresses command XR-172

show lane le-arp command XR-174

show lane server command XR-176

show lat advertised command DR-426

show lat groups command DR-427

show lat nodes command DR-428

show lat services command DR-430

show lat sessions command DR-431

show lat traffic command DR-435

show line command DR-48

show llc2 command BR-425, WR-312

show lnm bridge command BR-151

show lnm config command BR-152

show lnm interface command BR-154

show lnm ring command BR-157

show lnm station command BR-158

show local-ack command BR-219, BR-455

show logging command FR-507, FR-511, FR-522, FR-568

show memory command FR-571

show microcode command FR-257

show mls rp command XR-101

show mls rp vtp-domain command XR-103

show modem at-mode command DR-126

show modem call-stats command DR-127

show modem command DR-118

show modem configuration command DR-132

show modem connect-speeds command DR-136

show modem cookie command DR-140

show modem csm command DR-141

show modem log command DR-143

show modem mapping command DR-150

show modem operational-status command DR-157

show modem summary command DR-160

show modem test command DR-161

show modem version command DR-162

show modemcap command DR-51, DR-113

show modem-pool command DR-167

show mpoa client cache command XR-197

show mpoa client command XR-195

show mpoa client statistics command XR-199

show mpoa default-atm-addresses command XR-200

show mpoa server cache command XR-204

show mpoa server name command XR-202

show mpoa server statistics command XR-206

show nbf cache command DR-54

show nbf sessions command DR-55

show ncia circuits command BR-737

show ncia client command BR-738

show ncia server command BR-740

show netbios-cache command BR-160

show network-clocks command VR-77, WR-144

show node command DR-437

show ntp associations command FR-671

show ntp status command FR-674

show num-exp command VR-79

show pas eswitch address command IR-332

show pci command FR-575

show pci hardware command FR-577

show ppp bap command DR-800

show ppp multilink command DR-612, DR-771, DR-802

show ppp queues command SR-47

show privilege command SR-444

show processes command FR-579

show processes memory command FR-582

show protocols command FR-584

show qllc command BR-453

show queue command QR-74

show queueing command QR-76

show reload command FR-323

show rif command BR-161, IR-333

show rmon alarms command FR-413

show rmon capture command FR-415

show rmon command FR-411

show rmon events command FR-417

show rmon filter command FR-419

show rmon history command FR-421

show rmon hosts command FR-424

show rmon matrix command FR-426

show rmon statistics command FR-428

show rmon topn command FR-431

show route-map command P1R-564, P3R-308

show rtr application command FR-433

show rtr collection-statistics command FR-434

show rtr configuration command FR-436

show rtr distribution-statistics command FR-438

show rtr history command FR-440

show rtr operational-state command FR-442

show rtr reaction-trigger command FR-444

show rtr totals-statistics command FR-445

show running-config command

: See more command

show service command DR-440

show sgbp command DR-773

show sgbp queries command DR-772, DR-774

show smds addresses command WR-264

show smds map command WR-265

show smds traffic command WR-266

show smrp forward command P2R-172

show smrp globals command P2R-174

show smrp group command P2R-176

show smrp mcache command P2R-178

show smrp neighbor command P2R-180

show smrp port command P2R-182

show smrp route command P2R-184

show smrp traffic command P2R-186

show sna command BR-528

show snapshot command DR-828

show snmp command FR-447

show snmp pending command FR-450

show snmp sessions command FR-451

show sntp command FR-676

show source-bridge command BR-162

show span command BR-79, BR-165, BR-170, BR-192

show sscop command WR-145

show sse summary command BR-80, BR-166, P1R-179, P2R-458

show stacks command FR-585

show standby command P1R-179

show startup-config command

: See more command

show stun command BR-356

show subsys command FR-586

show syscon discover command FR-697

show syscon mibpoll command FR-700

show syscon monitor command FR-703

show syscon perfdata command FR-705

show syscon sdp command FR-707, FR-709

show syslog-server command FR-711

show tag-switching atm-tdp bindings command XR-53

show tag-switching atm-tdp cabability command XR-55

show tag-switching forwarding-table command XR-59

show tag-switching interfaces command XR-62

show tag-switching tdp bindings command XR-64

show tag-switching tdp discovery command XR-67

show tag-switching tdp neighbors XR-68

show tag-switching tdp parameters command XR-70

show tag-switching tsp-tunnels command XR-72

show tarp blacklisted-adjacencies command P3R-312

show tarp command P3R-310

show tarp host command P3R-313

show tarp interface command P3R-314

show tarp ldb command P3R-315

show tarp map command P3R-316

show tarp static-adjacencies command P3R-317

show tarp tid-cache command P3R-318

show tarp traffic command P3R-320

show tcp brief command DR-449, FR-593

show tcp command DR-443, FR-588

show tcp intercept connections command SR-174

show tcp intercept statistics command SR-176

show tcp statistics command P1R-181

show tdm connections command FR-594

show tdm connections motherboard command

: channel output, interpreting FR-594

show tdm data command FR-595

show tech-support command FR-596

show tech-support rsvp command QR-78

show terminal command DR-183

show traffic-shape command QR-79

show traffic-shape statistics command QR-81

show translate command DR-504

show ttycap command DR-452

show users command DR-57, DR-506

show version command FR-324

show vines access command P3R-26

show vines cache command P3R-27

show vines host command P3R-30

show vines interface command P3R-31

show vines ipc command P3R-34

show vines neighbor command P3R-36

show vines route command P3R-40

show vines service command P3R-43

show vines traffic command P3R-46

show vlans command BR-84

show voice call command VR-80

show voice dsp command VR-82

show voice port command VR-84

show vpdn command DR-838

show vpdn history failure command DR-840

show whoami command FR-83

show x25 interface command WR-315

show x25 map command WR-316

show x25 pad command DR-563

show x25 remote-red command WR-318

show x25 route command WR-319

show x25 services command WR-320

show x25 vc command WR-321

show x25 xot command WR-328

show xns cache command P3R-365

show xns interface command P3R-366

show xns route command P3R-368

show xns traffic command P3R-370

show xremote command DR-453

show xremote line command DR-456

shows sessions command DR-442

shutdown

: enabling for SNMP FR-473

shutdown (controller) command IR-338

shutdown (dial peer) command VR-90

shutdown (hub) command IR-339

shutdown (interface) command IR-340

shutdown (voice port) command VR-147

shutdown command BR-872, VR-91

signal command VR-148

signals

: Break DR-896
: pulsing DTR DR-251, IR-170

SIG-TS-001/1991 standard WR-269

Silicon Switch Processor

: See SSP

Simple Multicast Routing Protocol

: See SMRP

Simple Network Management Protocol

: See SNMP

single DDR telephone number

: specifying DR-679, DR-705, DR-729

single-character patterns

: anchoring DR-905
: creating DR-902
: description DR-902
: using multipliers DR-904

Skeme key exchange protocol

: See IKE

slave auto-sync config command FR-329

slave default-slot command FR-330

slave image command FR-331

slave reload command FR-332

slave sync config command FR-333

slave terminal command FR-334

SLIP

connections to server DR-639 -DR-640

session

: automatic startup DR-620

slip command DR-639

SMDS

address resolution (ARP) WR-273

address specification WR-268

addresses

: bridging's effect on WR-268
: broadcast WR-273, WR-275
: MAC address map to WR-93, WR-263
: multicast WR-273, WR-275

AppleTalk on WR-273

ARP WR-271

assigned address display WR-264, WR-265

ATM WR-39

bridging WR-276

broadcast ARP messages WR-275

DECnet on WR-273

disabling split horizon P1R-209, P1R-225

DXI 3.2 with heartbeat WR-269

dynamic routing WR-272

enabling via encapsulation WR-261

fast switched IPX P2R-348

general statistics WR-266

IP address and subnet mask on WR-275

IP on WR-274

IPX on WR-274

ISO CLNS on WR-273

maximum packet size WR-261

multiple logical IP subnetworks WR-262, WR-276, WR-278

protocols supported WR-273

static routing table

: configuring WR-280
: displaying WR-265
: protocols supported WR-280

subinterfaces for multiple IP subnetworks WR-262

VINES on WR-274

smds address command WR-268

smds dxi command WR-269

smds enable-arp command WR-271

smds glean command WR-272

smds multicast arp command WR-275

smds multicast bridge command WR-276

smds multicast command WR-273

smds multicast ip command WR-278

smds static-map command WR-280

smds-dest-address command BR-696

SMRP P2R-194

fast switching, enabling P2R-192

forwarding table P2R-172

: fields (table) P2R-173

global information P2R-174

group address P2R-176

group table

: displaying P2R-176
: field descriptions (table) P2R-177

multicast services over AppleTalk, enabling P2R-194

neighbor P2R-180

neighbor table

: displaying P2R-181
: field descriptions (table) P2R-181

port table P2R-182

: displaying P2R-182
: field descriptions (table) P2R-183

routing table

: displaying P2R-184
: field descriptions (table) P2R-185

traffic table

: displaying P2R-186
: field descriptions (table) P2R-187

smrp mroute-cache protocol appletalk command P2R-192

smrp protocol appletalk command P2R-194

smrp routing command P2R-196

smt-queue-threshold command IR-341

SNA

monitoring BR-528

Service Point

: activating BR-543
: Ethernet interface, defining BR-538
: Ethernet interface, enabling BR-531
: Frame Relay interface, defining BR-532
: Frame Relay interface, enabling BR-531
: monitoring BR-528
: QLLC
: data link, defining BR-534
: data link, enabling BR-529
: RSRB
: activating BR-542
: connection BR-538
: service access point, enabling BR-541

SNA (continued)

: SDLC data link
: enabling BR-530
: defining BR-536
: Token Ring interface
: defining BR-538
: Token Ring interface, enabling BR-531
: virtual data link control connection
: activating BR-547
: service access point, enabling for upstream host BR-546
: virtual data link control connection, configuration (example) BR-544
: virtual data link control connection, virtual ring, defining BR-544

: traffic prioritization, configuring BR-222

sna enable-host command

: Ethernet BR-531
: Frame Relay BR-531
: QLLC BR-529
: SDLC BR-530
: Token Ring BR-531

sna host command

: Ethernet BR-538
: FDDI BR-538
: Frame Relay BR-532
: QLLC BR-534
: RSRB BR-538
: SDLC BR-536
: Token Ring BR-538
: virtual data link control BR-538

sna rsrb command BR-540

sna rsrb enable-host command BR-541

sna rsrb start command BR-542

sna start command BR-543

sna vdlc command BR-544

sna vdlc enable-host command BR-546

sna vdlc start command BR-547

SNAP packet encapsulation

assigning access list to filter

: on input BR-178
: on output BR-184

filtering

: frames on output BR-184
: on input BR-29

filtering on output BR-37

snapshot client command DR-830

snapshot routing DR-825 -DR-832

: dialer map, defining for DDR DR-827
: quiet period, ending DR-826
: when to use DR-825

snapshot server command DR-832

SNMP

configuration parameters, displaying FR-568

message queue length FR-472

packet filtering FR-470

system contact, setting FR-457

system location, setting FR-467

system shutdown, enabling FR-473

trap address violation IR-342

trap message

: source, setting FR-476
: timeout FR-477

trap operation

: enabling VR-93

snmp enable peer-trap poor-qov command VR-92

SNMP server

informs

: enbling FR-459

system location, setting FR-462

trap operation

: enabling FR-459
: recipient FR-462

snmp trap illegal-address command IR-342

snmp trap link-status command FR-480, VR-150

snmp-server access-policy command FR-453

snmp-server chassis-id command FR-454

snmp-server community command FR-455

snmp-server contact command FR-457

snmp-server context command FR-458

snmp-server enable command FR-459

snmp-server enable traps command FR-511, VR-93

snmp-server host command FR-462

snmp-server informs command FR-465

snmp-server location command FR-467

snmp-server manager command FR-468

snmp-server manager session-timeout command FR-469

snmp-server packet-size command FR-470

snmp-server party command FR-471

snmp-server queue-length command FR-472

snmp-server system-shutdown command FR-473

snmp-server tftp-server-list command FR-474

snmp-server trap-authentication command

: See snmp-server enable traps command

snmp-server trap-timeout command FR-477

snmp-server view command FR-478

SNPA

cluster alias P3R-199

NSAP

: mapping P3R-206, P3R-214

sntp broadcast client command FR-677

sntp server command FR-679

socket numbers (table) P2R-208

soft reconfiguration P1R-418

software compression IR-51, WR-209, WR-218

: configuring DR-240
: displaying IR-194
: PPP, configuring DR-576

software configuration boot register FR-311, FR-313

software flow control

: changing for session FR-95
: changing start character FR-107
: configuring for a line DR-15

SONET PLIM

ATM

: (example) WR-40
: configuring WR-40

source-address command IR-344

source-bridge command BR-167, BR-569

source-bridge connection-timeout command BR-169, BR-221

source-bridge cos-enable command BR-222

source-bridge enable-80d5 command BR-170

source-bridge explorer-dup-ARE-filter command BR-172

source-bridge explorer-fastswitch command BR-173

source-bridge explorer-maxrate command BR-174

source-bridge explorerq-depth command BR-175

source-bridge fst-peername command BR-223, BR-457

source-bridge input-address-list command BR-176

source-bridge input-lsap-list command BR-177

source-bridge input-type-list command BR-178

source-bridge keepalive command BR-224

source-bridge largest-frame command BR-225

source-bridge max-hops command BR-179

source-bridge max-in-hops command BR-180

source-bridge max-out-hops command BR-181

source-bridge output-address-list command BR-182

source-bridge output-lsap-list command BR-183

source-bridge output-type-list command BR-184

source-bridge passthrough command BR-226

source-bridge proxy-explorer command BR-185

source-bridge proxy-netbios-only command BR-186

source-bridge qllc-local-ack command BR-458

source-bridge remote-peer frame-relay command (direct encapsulation) BR-228

source-bridge remote-peer fst command BR-230, BR-459

source-bridge remote-peer ftcp command BR-232

source-bridge remote-peer interface command BR-461

source-bridge remote-peer tcp command BR-234, BR-463

source-bridge ring-group command BR-187

source-bridge route-cache cbus command BR-190

source-bridge route-cache command BR-189

source-bridge route-cache sse command BR-191

source-bridge sap-80d5 command BR-192

source-bridge sdllc-local-ack command BR-467

source-bridge spanning command

: automatic BR-194
: manual BR-195

source-bridge tcp-queue-max command BR-236

source-bridge transparent command BR-196

source-bridge transparent fastswitch command BR-198

source-bridge trcrf-vlan command BR-204

source-route translational bridging

: See SR/TLB

spanning explorer packets, definition BR-195

spanning explorers, enabling BR-194, BR-195

spanning tree

domain

: assigning BR-16
: multiple bridge loops with BR-16

protocol

: defining type to use BR-50
: disabling BR-40

topology, displaying BR-79

special characters

activation character FR-58

changing for session FR-90

character width

: changing for session FR-105
: configuring for line FR-84
: defining default FR-63

disconnect character FR-64

dispatch character

: setting for line FR-65

escape character

: changing for session FR-93
: setting for line FR-68

hold character

: changing for session FR-96
: configuring for line FR-71

special-character-bits command FR-84

speed

: See line speed

speed command DR-187, IR-345

spf-interval command P2R-459

split horizon

: AppleTalk Enhanced IGRP P2R-50
: IP Enhanced IGRP P1R-317
: IPX Enhanced IGRP P2R-371
: ISO IGRP P3R-231
: VINES P3R-89

spoofing

DDR DR-712, DR-736

IPX P2R-388

SPX

: enabling P2R-373
: setting the idle time P2R-372

watchdog packets P2R-372, P2R-373, P2R-388

SPX

enable, connections spoofing P2R-452

spoofing

: enabling P2R-373
: setting the idle time P2R-372

squeeze command FR-197

squelch command IR-347

SR/TLB

: enabling BR-196
: fast-switching mode, disabling BR-198

SRB

: configuration, displaying BR-162
: connection timeout interval, setting BR-169, BR-221
: explorer packets, configuring BR-195
: hops, limiting the number of BR-179, BR-180, BR-181
: information about, displaying BR-147

SSCOP

ATM WR-145

connection control timer (example) WR-147

receiver window

: (example) WR-151

retry count (example) WR-149

transmitter window (example) WR-152

sscop cc-timer command WR-147

sscop keepalive-timer command WR-148

sscop max-cc command WR-149

sscop poll-timer command WR-150

sscop receive-window command WR-151

sscop send-window command WR-152

SSE fast switching

: reinitializing BR-56
: SRB BR-191
: statistics, displaying BR-80, BR-166
: transparent bridging BR-42

SSP

: reinitializing BR-56, BR-98
: statistics, displaying BR-80, BR-166

stack group

bid value on system, displaying DR-774

bidding

: default across stack members DR-771
: offload server DR-771
: overriding offload or default DR-772

configuration (example) DR-769

create and name DR-768

master bundle interface, host DR-771

member

: assigning DR-768
: host name DR-769
: IP address DR-769

receiver, first call, master bundle interface host DR-771

Stacker compression IR-51

standard access list, IP P1R-121

: named P1R-141

standard access list, IPX

: named P2R-248

standard OUI form, specifying BR-60, BR-99

standby authentication command P1R-74

standby ip command P1R-184

standby mac-refresh command P1R-186

standby preempt command P1R-187

standby priority command P1R-187

standby timers command P1R-189

standby track command P1R-190

standby use-bia command P1R-192

start character

: changing flow control FR-107
: changing for session FR-107
: configuring for a line DR-59, DR-188
: default DR-15

start-character command DR-59, DR-188

start-chat command DR-60

startup configuration file FR-278

state-machine command FR-85

static maps

ATM

: displaying WR-101

static routes

Apollo Domain P3R-7

AppleTalk P2R-89, P2R-91

CLNS

: interface P3R-220
: redistributing P3R-271
: TARP mapping P3R-329, P3R-339

configuring P1R-485

: establishing P1R-485
: redistributing P1R-513

IPX P2R-345

SMDS

: configuring WR-280
: displaying WR-265

VINES P3R-80

XNS P3R-386

static TEI DR-863

statistics for RTR

: displaying FR-434, FR-438, FR-481
: distributions kept FR-374
: hops kept FR-379
: hours kept FR-380
: paths kept FR-383

statistics-distribution-interval command FR-481

stop bits

: changing for session FR-108
: configuring for line FR-87

stop character

: changing flow control FR-109
: changing for session FR-109
: configuring for a line DR-62
: default DR-15

stopbits command FR-87

stop-character command DR-62

streamlined setup facility FR-49

(example) FR-55

booting from network server

: interface IP parameters, configuring FR-55

configuration register FR-49

configuration, corrupted startup FR-49

rxboot ROM FR-49

string

: setting system location FR-462
: SNMP community access, setting FR-455
: system contact, setting FR-457
: system location, setting FR-467

stub area

: See OSPF

stub IP multicast routing P1R-594

STUN

connection status

: displaying BR-354, BR-356

frames

: forwarding BR-367, BR-368

interface

: configuring BR-330
: placing in a group BR-358

IP addresses, enabling BR-361

non-SDLC protocol, defining BR-373

peer connection BR-360

stun group command BR-358

stun keepalive-count command BR-360

stun peer-name command BR-361

stun protocol-group command BR-362, BR-364

stun remote-peer-keepalive command BR-366

stun route address interface dlci command BR-367

stun route address interface serial command BR-368

stun route address tcp command BR-369

stun route all interface serial command BR-371

stun route all tcp command BR-372, BR-375

stun schema offset length format command BR-373

stun sdlc-role primary command BR-375

stun sdlc-role secondary command BR-376

subinterface configuration mode

: summary FR-xxi

subinterfaces

BRI multipoint, point-to-point DR-860

configuring IR-109, IR-110, IR-111

IPX P2R-302

ISDN BRI DR-198, DR-860

: multipoint, point-to-point DR-198

NLSP P2R-302

: configuring (example) P2R-303

subnet masks, using ICMP P1R-14

Subnetwork Access Protocol

: See SNAP

subnetwork point of attachment

: See SNPA

summary address

: IP Enhanced IGRP P1R-318

summary-address command P1R-299, P1R-362

supervisory disconnect command VR-151

SVC

clearing XOT WR-288

disabling

: (example) WR-37
: description WR-37

svc command WR-153

switched PVCs

: See PVC, X.25

switching

autonomous XR-11

fast XR-11

flow XR-11

flow switching XR-9, XR-11

Frame Relay, specifying static route for WR-225

: controlling the route cache XR-11

NetFlow XR-2, XR-14

: enabling XR-13

specifying static route for WR-225

VIP distributed XR-11

switching feature (example) DR-907

synchronization command P1R-465

synchronization, definition P1R-465

Synchronous Data Link Control

: See SDLC

syscon address command FR-713

syscon community command FR-714

syscon monitor command FR-715

syscon monitor traps command FR-717

syscon password command FR-719

syscon poll-group command FR-720

syscon shelf-id command FR-722

syscon source-interface command FR-723

Syslog Disk Logging

: syslog server subfiles FR-687, FR-711

syslog history table FR-568

systat command

: See show users command

system buffer

: See buffers

system contact string

: setting FR-457

system controller

: configuring FR-713
: data collection FR-689, FR-691, FR-695
: shelf configuration FR-719
: shelf session FR-682
: SNMP community string FR-714

system error messages

: redirecting FR-517

system ID messages, controlling MOP DR-424

system image file

: copying from server to Flash (example) FR-274

system images

: checksum, verifying FR-203
: compressed FR-308
: copying from a server using rcp FR-308

system images (continued)

: copying using Xmodem FR-260
: copying using Ymodem FR-260
: default filename FR-307
: invalidated FR-290

system location string

: setting FR-467

system shutdown

: enabling for SNMP FR-473

system software

: booting FR-306, FR-307
: displaying version of FR-324

Systems Network Architecture

: See SNA

T

t1 bert command IR-348

t1 clock source command IR-350

T1 controller

: adding descriptive name IR-63

t1 external command IR-351

t1 fdl ansi command IR-353

t1 framing command IR-354

t1 linecode command IR-355

t1 test command IR-357

T1 timer, SDLC BR-417

t1 timeslot command IR-359

t1 yellow command IR-361

: bert test IR-348
: cable length IR-20
: clock source IR-41
: configuration IR-54
: display controllers IR-222
: display interface IR-307
: external port IR-351
: FDL performance report IR-353, IR-361
: framing IR-92
: line coding IR-355
: performance report IR-353, IR-361
: T1 clock source IR-350
: T1 framing IR-354
: T1 test IR-357
: T1 timeslots IR-359

Tab key

: command completion FR-xvii

table-map command P1R-466

TACACS

command comparison

: (table) SR-97 -SR-98

username authentication for extended mode DR-615

tacacs-server attempts command SR-104

tacacs-server authenticate command SR-105

tacacs-server directed-request command SR-107

tacacs-server extended command SR-108

tacacs-server host command SR-109

tacacs-server key command SR-111

tacacs-server last-resort command SR-112

tacacs-server login-timeout command SR-113

tacacs-server notify command SR-114

tacacs-server optional-passwords command SR-115

tacacs-server retransmit command SR-116

tacacs-server timeout command SR-117

tag command FR-482

tag-switching advertise-tags command XR-74

tag-switching atm allocation-mode command XR-76

tag-switching atm control-vc command XR-77

tag-switching atm vc-merge command XR-79

tag-switching atm vpi command XR-80

tag-switching ip (configuration) command XR-81

tag-switching ip (interface) command XR-82

tag-switching tag-range downstream command XR-84

tag-switching tdp discovery command XR-85

tag-switching tdp holdtime command XR-86

tag-switching tsp-tunnels command XR-87, XR-88

target identifier

: See TID

Target Identifier Address Resolution Protocol

: See TARP

TARP

blacklist adjacency

: listing P3R-312
: setting P3R-323

cache

: enabling P3R-321
: setting timer P3R-324

counters, clearing P3R-192

enabling P3R-340

global parameters, displaying P3R-310

host, displaying P3R-313

interface

: displaying P3R-314
: enabling on P3R-325
: enabling propagation P3R-333

loop detection buffer

: clearing table P3R-193
: displaying table P3R-315
: setting timer P3R-327

NSAP-to-TID

: querying map P3R-336

N-selector type, setting P3R-330

packet lifetime, setting P3R-328

PDUs

: global propagation P3R-326
: originating P3R-331

protocol, specifying P3R-335

sequence number, setting P3R-341

TARP (continued)

static adjacency

: displaying P3R-317
: setting P3R-339

static map

: displaying P3R-316
: setting P3R-329

TID

: assigning P3R-344
: cache, displaying P3R-318
: clearing table P3R-194

timeouts

: type 1, setting P3R-342
: type 2, setting P3R-332, P3R-343
: type 5, setting P3R-322

traffic, displaying P3R-320

URC bit, setting P3R-345

tarp allow-caching command P3R-321

tarp arp-request-timer command P3R-322

tarp blacklist-adjacency command P3R-323

tarp cache-timer command P3R-324

tarp enable command P3R-325, P3R-333

tarp global-propagate command P3R-326

tarp ldb-timer command P3R-327

tarp lifetime command P3R-328

tarp map command P3R-329

tarp nselector-type command P3R-330

tarp originate command P3R-331

tarp post-t2-response-timer command P3R-332

tarp propagate command P3R-333

tarp protocol-type command P3R-335

tarp query command P3R-336

tarp resolve command P3R-337

tarp route-static command P3R-339

tarp run command P3R-340

tarp sequence-number command P3R-341

tarp t1-response-timer command P3R-342

tarp t2-response-timer command P3R-343

tarp tid command P3R-344

tarp urc command P3R-345

TCP

common services (table) QR-26

connection

: enabling MD5 authentication for BGP P1R-407
: enabling Path MTU Discovery P1R-157
: setting connection-attempt time P1R-160

connections

: clearing FR-130

description of P1R-3

encapsulation

: configuring SRB for BR-234, BR-463
: enabling use on STUN interface BR-372
: specifying for STUN BR-369

header compression, disabling conflicting features P1R-159, P1R-161

keepalive protocol, activating FR-530

maximum read size P1R-154

outgoing queue size P1R-158

packet dispatch state machine FR-66

port numbers (table) QR-26

protocol translation DR-509, DR-510, DR-517, DR-519, DR-523, DR-528

selective acknowledgment P1R-159

timestamp P1R-161

window size P1R-162

TCP idle timeout

: specifying SR-196

TCP Intercept

enabling SR-163

modes

: intercept mode SR-168
: watch mode SR-168

timeouts SR-162

TCP/IP

: rlogin connections DR-419, DR-421, DR-422
: Telnet connections DR-458

TCP/IP header compression

on interface WR-193

: inheritance, effect on all IP maps WR-193

on IP map WR-214

: inheriting compression from interface WR-214
: overriding compression from interface WR-214

on X.25 WR-357

TCP/IP, description P1R-3

tcp-port command BR-873

tdm-group command VR-96

technical publications and standards FR-735

technical support information

: displaying FR-596

telephone delta, in PPP BACP negotiations DR-791

Telnet

addresses, suppressing FR-657

changing end-of-line characters FR-114

connections DR-458 -DR-461

: configuring a line DR-464

description DR-459

generating Break signal DR-462

notification of pending output DR-416, FR-77

protocol translation DR-509, DR-510, DR-517, DR-519, DR-523, DR-528

Remote Echo option DR-463, FR-111

special commands (table) DR-460

Suppress Go Ahead option DR-463, FR-111

telnet break-on-ip command DR-462

telnet command DR-458, SR-136

telnet refuse-negotiations command DR-463

telnet speed command DR-464

telnet sync-on-break command DR-465

telnet transparent command DR-466

term ip netmask-format command P1R-100

terminal DR-187

absolute timeout interval, setting DR-172

activation character

: setting FR-58

baud rate

: receive, configuring for a line DR-180
: transmit, configuring for a line DR-195

changing

: escape character FR-93
: line speed FR-106
: screen length FR-98
: stop character FR-109

character

: data bits FR-89
: padding FR-101

character padding

: configuring for line FR-78

displaying

: debug messages FR-99

end-of-line character FR-114

escape character, defining for a line FR-68

file download mode FR-92

flow control FR-95

line speed FR-106, FR-116

location, recording FR-74

locking FR-75

locking access to DR-410

message length FR-140

output notification FR-100

packet dispatch character FR-90

parameter settings, displaying DR-183

parity bit FR-102

pausing output to screen FR-71

port queue FR-103

receive speed FR-104

screen length

: changing for session FR-98
: configuring for line FR-73

screen width

: changing for session FR-118
: configuring for line FR-119

selecting a transport protocol DR-468

session limits, setting DR-181

session timeout interval, setting DR-182

settings, saving FR-82

specifying type FR-115

start character FR-107

type, configuring for a line FR-117

Terminal Access Controller Access Control System

: See TACACS

terminal databits command FR-88

terminal data-character-bits command FR-89

terminal dispatch-character command DR-894, FR-90

terminal dispatch-timeout command FR-91

terminal download command FR-92

terminal editing command FR-39

terminal escape-character command FR-93

terminal exec-character-bits command FR-94

terminal flowcontrol command FR-95

terminal full-help command FR-42

terminal history command FR-44

terminal hold-character command FR-96

terminal international command FR-46, FR-165

terminal keymap-type command FR-97

terminal lat out-group command DR-467

terminal length command FR-98

terminal monitor command FR-99

terminal notify command FR-100

terminal padding command FR-101

terminal parity command FR-102

terminal port queue

: retry interval FR-103

terminal rxspeed command FR-104, FR-116

terminal services DR-171

terminal sessions

: closing FR-10

terminal special-character-bits command FR-105

terminal speed command FR-106

terminal start-character command FR-107

terminal stopbits command FR-108

terminal stop-character command FR-109

terminal telnet break-on-ip command FR-110

terminal telnet refuse-negotiations command FR-111

terminal telnet speed command FR-112

terminal telnet sync-on-break command FR-113

terminal telnet transparent command FR-114

terminal terminal-type command FR-115

terminal transport preferred command DR-468

terminal txspeed command FR-116

terminal width command FR-118

terminal-queue command FR-103

terminal-type command FR-117

test appletalk command P2R-197

test crypto initiate-session command SR-312

test flash command FR-598

test interface fastethernet command IR-362

test interfaces command FR-599

test memory command FR-600

test modem back-to-back command DR-169

test service-module command IR-363

test T1 IR-357

Texas Instruments Token Ring MAC firmware

: known defect BR-115

TFTP

port number BR-208, BR-213

server

: booting automatically FR-306
: configuring router to function as FR-198
: router, configuring to function as FR-198, FR-358

tftp-server command FR-198, FR-358

tftp-server system command

: See tftp-server command

tg command BR-874

tg-number command BR-697

tg-row command BR-698

threshold command FR-483

thresholds

: See CBAC, thresholds

THT

: FDDI IR-86

tick count

: IPX P2R-268

TID

displaying cache P3R-318

NSAP

: mapping, enabling P3R-321
: querying P3R-336

NSAP-to-TID

: mapping P3R-329

router, assigning P3R-344

table, clearing P3R-194

time limit, setting for a session DR-653

timeout command FR-484

timeout interval FR-91

: ARP P1R-7
: EXEC process, setting DR-14, FR-135
: terminal character dispatch FR-67
: trap message FR-477
: See also CBAC, timeouts

timeout login response command SR-49

timeouts

: absolute DR-172
: server login SR-49
: session, setting DR-182
: setting for DDR interface DR-684

timeouts initial command VR-152

timeouts interdigit command VR-153

timeouts wait-release command VR-154

timers

AppleTalk Enhanced IGRP P2R-51

BGP, adjusting P1R-467

DECnet P3R-130, P3R-159

Frame Relay keepalive WR-233

IP Enhanced IGRP, adjusting P1R-315, P1R-316

ISO IGRP, adjusting P3R-346

LAPB

: interface outage WR-294
: link failure (T4) WR-302
: T1 retransmission WR-301
: T4 relation to T1 WR-302

service advertisement, setting DR-407

TARP

: cache entries P3R-324
: loop detection buffer table P3R-327
: type 1 response P3R-342
: type 2 response P3R-332, P3R-343
: type 5 timeout P3R-322

token holding IR-86

X.25

: call request (t21) WR-391
: clear indication (t13) WR-389
: clear request (t23) WR-393
: hold timer, setting WR-340
: incoming call (t11) WR-387
: reset indication (t12) WR-388
: reset request (t22) WR-392
: restart indication (t10) WR-386
: restart request (t20) WR-390

timers basic command P1R-199, P1R-216, P1R-237, P3R-346

timers bgp command P1R-467

timers lsa-group-pacing command P1R-301

timers spf command P1R-302

timeslot command DR-252, IR-364

timeslots

: T1 IR-359

timestamp

: TCP P1R-161

timing clear-wait command VR-155

timing delay-duration command VR-157

timing delay-start command VR-159

timing delay-with-integrity command VR-161

timing dialout-delay command VR-165

timing dial-pulse min-delay command VR-163

timing digit command VR-167

timing inter-digit command VR-169

timing percentbreak command VR-171

timing pulse command VR-173

timing pulse-interdigit command VR-175

timing wink-duration command VR-177

timing wink-wait command VR-179, VR-185

timing-mark command BR-877

TN3270

character mapping

: creating DR-472
: determining DR-450
: displaying DR-451

connections to server DR-469

data character bits, setting DR-470, DR-471

default keymaps DR-377

description DR-469

display size DR-363

international characters

: displaying DR-450
: printing DR-472

null processing handling DR-477

require reset after user error DR-479

special characters DR-376

tn3270 8bit display command DR-470

tn3270 8bit transparent-mode command DR-471

tn3270 command DR-469

tn3270 null-processing command DR-477

tn3270 optimize-cursor-move command DR-478

tn3270 reset-required command DR-479

TN3270 server

defining

: TOS values BR-771

LU nailing

: client command BR-754

TOS

: ip precedence command BR-770
: ip tos command BR-771

tn3270 status-message command DR-480

tn3270 typeahead command DR-481

tn3270-server command BR-876

token holding timer

: See THT

Token Ring

: APPN partner node, specifying BR-622
: controller, displaying information about BR-142
: DECnet encapsulation over P3R-129
: functional address P1R-615
: interface, displaying information about BR-147
: IP multicast routing over P1R-615
: LNM information for, displaying BR-157
: logical configuration of, monitoring BR-104
: polling frequency, configuring BR-384
: wait interval for an acknowledgment, configuring BR-380
: XID transmissions, specifying frequency of BR-392

token rotation time

: See TRT

TokenTalk P2R-1

topology table

: AppleTalk Enhanced IGRP P2R-129
: IPX Enhanced IGRP P2R-426

trace

common problems FR-605

ISO CLNS

: IP routes P3R-350
: terminating P3R-347, P3R-349
: test characters (table) P3R-348

terminating FR-605

tracing IP routes FR-606

trace (privileged) command FR-601

trace (user) command FR-605

trace command

common problems FR-602, P1R-101, P1R-105

extended test FR-601, P1R-101

: privileged P1R-101
: routes FR-602
: user P1R-105

ISO CLNS

: privileged P3R-347
: user P3R-349

privileged, overview FR-601

terminating FR-601, P1R-101, P1R-105

tracing IP routes P1R-102, P1R-106

user, overview FR-605

VINES P3R-51

TraceRoute function, VINES P3R-51

traffic priority management

: weighted fair queueing QR-7

traffic shaping

: access lists, using QR-87
: configuration information (table) QR-80
: FECN/BECN messages QR-85
: interfaces QR-88, QR-90
: outbound QR-89
: statistics (table) QR-82
: strict (example) WR-38
: strict, enabling WR-38

traffic-engineering filter command XR-89

traffic-engineering route command XR-90

traffic-shape adaptive command QR-83

traffic-shape fecn-adapt command QR-85

traffic-shape group command QR-87

traffic-shape rate command QR-89

traffic-share command P1R-239, P1R-333

transfer-mode command FR-724

transition states, FDDI IR-264

translate command DR-508, DR-517, DR-526

translate lat command DR-514

translate tcp command DR-523

translate x25 command DR-534

translation options

LAT DR-508, DR-514, DR-518, DR-527

outgoing options, mapping to virtual interface template commands DR-515, DR-536

prevent service advertisements DR-508, DR-514

swap outgoing X.25 connections DR-529, DR-535

TCP

: binary mode DR-523
: incoming address DR-523

TCP/IP

: PPP DR-509, DR-518, DR-527
: SLIP DR-508, DR-518, DR-527
: Telnet DR-508, DR-517, DR-527

Telnet binary mode DR-517

X.25 DR-508, DR-518, DR-526, DR-534

translational bridging IR-79

Transmission Control Protocol

: See TCP

Transmission Control Protocol/Internet Protocol

: See TCP/IP

transmission-priority command BR-700

transmit clock signal

: inverting DR-249, IR-124

transmit-clock-internal command DR-253, IR-365

transmit-interface command P1R-193

transmitter-delay command DR-254, IR-366

transparent bridging

access-list (type-code) command IR-3

constrained multicast flooding

: enabling BR-14
: multicast state information
: displaying BR-71
: multicast state information, clearing BR-55

interface restrictions BR-19

on FDDI interface IR-79

SMDS WR-276

type-code IR-3

transport input command DR-189

transport mode SR-340

transport output command DR-191

transport preferred command DR-193

transport protocol, selecting DR-468

trap

host, setting message queue length FR-472

message

: address violation IR-342
: establishing timeout FR-477
: source interface FR-476

operation, enabling FR-459, VR-93

recipient, specifying FR-462

triggers for RTR

: configuring FR-396, FR-398
: displaying FR-444

TRIP

: displaying information about IR-229

TRISL

commands

: clear drip BR-200
: encapsulating BR-201
: multiring trcrf-vlan BR-202
: show drip BR-203
: source-bridge trcrf-vlan BR-204

RIF

: enabling BR-202

VLANs

: attaching BR-204

Trivial File Transfer Protocol

: See TFTP

troubleshooting

: modem access DR-884

TRT

: FDDI IR-86

ts16 command DR-255, IR-367

ttycap command DR-482

ttycap support DR-483

tunnel

VPDN

: shutting down, without unconfiguring DR-837

tunnel checksum command IR-368

tunnel command DR-486

tunnel destination command IR-369

tunnel key command IR-371

tunnel mode SR-339

tunnel mode command IR-372, P1R-107, P2R-201

tunnel mode tag-switching command XR-92

tunnel sequence-datagrams command IR-374

tunnel source command IR-375, P2R-203

tunnel tsp-hop command XR-93

tunneling

: AppleTalk, Cayman IR-372, P1R-107, P2R-201
: X.25, enabling WR-383

tx-queue-limit command IR-377

txspeed command DR-195

type 20 packets

IPX

: broadcasts P2R-276, P2R-381, P2R-382, P2R-383

type command FR-485, VR-181

U

ubr command WR-154

ubr+ command WR-156

UDP

common services BR-208, BR-213

common services (table) QR-26

datagrams

: flooding P1R-31
: speeding up flooding P1R-31

port numbers

: IPTalk P2R-61

port numbers (table) QR-26

port prioritizing QR-27

UDP broadcasts

: BOOTP forwarding agent P1R-27, P1R-32
: DHCP P1R-27, P1R-32

UDP idle timeout

: specifying SR-201

UIO serial port commands

: clock rate line VR-15
: clock rate network-clock command VR-16
: invert rxclock IR-122

unbind-action command BR-878

undelete command FR-201

underscore character in regular expressions DR-906

Ungermann-Bass Net/One

: See Net/One

UNI

version

: (example) WR-42
: configuring WR-42

unicast addresses

: ATM WR-39

unit numbers

: interface IR-28, IR-30, IR-34, IR-109

UNIX

compress command FR-308

Syslog Server

: message logging to FR-505

uncompress command FR-308

unrecognized command message

: help command FR-69

User Datagram Protocol

: See UDP

user EXEC mode

: summary FR-xxi

user-defined-1 command

: APPN link station BR-701
: APPN port BR-702

user-defined-2 command

: APPN link station BR-703
: APPN port BR-704

user-defined-3 command

: APPN link station BR-705
: APPN port BR-706

username command DR-615, SR-445

username, authentication DR-615

V

V.120

: answer all calls, static configuration DR-643
: automatic detection DR-258, DR-338
: dynamic detection and setting DR-642

V.25bis

: DDR options (table) DR-680, DR-706
: options DR-680, DR-706

vacant-message command FR-145

vad command VR-98, VR-183

validate-update-source command P1R-218, P1R-240

variance command P1R-334

vbr-nrt command WR-158

vbr-rt command VR-99, WR-160

: maximum, configuring WR-23

vc-class atm command WR-162

vc-per-vp

: (example) WR-43

vdlc command BR-707

verify bootflash command FR-258

verify command FR-203

verify flash command FR-259

verify-adjacent-node-type command BR-709

verify-data command FR-487

version command P1R-219

views, predefined

: described in RFC 1447 FR-478

VINES

access control P3R-57 -P3R-59

access lists

: displaying P3R-26
: extended, creating P3R-54
: interface, applying to P3R-53
: simple, creating P3R-57
: standard, creating P3R-59

addresses P3R-64, P3R-68

application layer support, displaying P3R-43

ARP packets, processing P3R-62

bandwidth, determining P3R-72

Banyan distributed naming system P3R-68

broadcast packets P3R-89

broadcasts

: encapsulation P3R-65
: forwarding P3R-78
: serverless networks P3R-86
: zero-hop P3R-86

class field P3R-78

encapsulation P3R-65

fast switching

: cache entries, deleting P3R-20
: cache entries, displaying P3R-27
: configuring P3R-82

filters

: access lists
: extended P3R-55
: simple P3R-57
: standard P3R-60
: input network P3R-70
: input router P3R-71
: interface, applying to P3R-53
: output network P3R-77

flash updates P3R-66

floating static routes P3R-80

hello messages P3R-99

hop count field P3R-78

host names

: addresses, assigning P3R-68
: entries, displaying P3R-30

interfaces, displaying status of P3R-31

IP header P3R-78

IPC connections

: blocks, deleting P3R-21
: displaying information P3R-34
: port numbers (table) P3R-56, P3R-61

load sharing P3R-82

VINES (continued)

metrics

: interface, specifying on P3R-72
: routing, determining P3R-80

neighbor table

: deleting P3R-22
: displaying P3R-36
: static paths, creating P3R-75

network connectivity, testing P3R-25

NIST clock P3R-97

NTP P3R-96, P3R-97

packet's path, determining P3R-51

protocol names P3R-54, P3R-59

router network address, redetermining P3R-84

routing

: enabling P3R-84
: on serverless networks P3R-86
: single route P3R-88

routing table

: deleting P3R-23
: displaying P3R-40

routing updates P3R-89

: filtering P3R-70, P3R-71, P3R-77
: flash updates P3R-66
: frequency P3R-101
: propagation P3R-99
: redirect messages P3R-79
: split horizon P3R-66, P3R-89

RTP

: enabling P3R-91
: messages, redirecting P3R-79

serverless networks P3R-62

single route P3R-88

SMDS, configuring over WR-274

split horizon P3R-66, P3R-89

SRTP, enabling P3R-91

static paths P3R-75

static routes P3R-80

StreetTalk P3R-68

time

: accepting updates P3R-57
: synchronizing with network time P3R-96
: synchronizing with router P3R-97
: updates
: accepting P3R-92
: sending P3R-93

TraceRoute function P3R-51

traffic statistics

: deleting P3R-24
: displaying P3R-46

vines access-group command P3R-53

vines access-list (extended) command P3R-54

vines access-list (simple) command P3R-57

vines access-list (standard) command P3R-59

vines arp-enable command P3R-62

vines decimal command P3R-64

vines encapsulation command P3R-65

vines enhancements command P3R-66

vines host command P3R-68

vines input-network-filter command P3R-70, P3R-77

vines input-router-filter command P3R-71

vines metric command P3R-72

vines neighbor command P3R-75

vines output-network-filter command P3R-77

vines propagate command P3R-78

vines redirect command P3R-79

vines route command P3R-80

vines route-cache command P3R-82

vines routing command P3R-84

vines serverless command P3R-86

vines single-route command P3R-88

vines split-horizon command P3R-89

vines srtp-enabled command P3R-91

vines time access-group command P3R-92

vines time destination command P3R-93

vines time participate command P3R-94

vines time services command P3R-95

vines time set-system command P3R-96

vines time use-system command P3R-97

vines update deltas command P3R-99

vines update interval command P3R-101

violations

access lists, IP

: See access lists, IP, violations

VIP distributed switching

: See switching

virtual access interfaces

: VTY line on which created, identifying DR-500

virtual asynchronous lines

: configuring authentication DR-510, DR-520, DR-529

virtual circuit

: See VC

virtual circuit descriptor

: See VC

virtual circuits

X.25

: displaying address map WR-316
: facility handling WR-403

W

watchdog packets P2R-388

: spoofing P2R-372

Weighted Random Early Detection

: See WRED

WFQ

: configuration information, displaying QR-76
: configuration statistics (table) QR-58, QR-75
: effect of custom queueing on QR-7
: effect of priority queueing on QR-7
: enabling QR-7
: Frame Relay switching QR-9
: IP precedence weighting QR-8
: traffic priority management QR-7
: traffic stream discrimination (table) QR-8
: See also DWFQ

where command DR-487, DR-565

which-route command P3R-351

whiteboard applications P1R-640

width command FR-119

wildcard command BR-710

word help

: description FR-13

WRED

: configuration information, displaying QR-76
: configuration statistics (table) QR-60
: enabling QR-39
: hardware support QR-39, QR-41, QR-44
: interface information QR-59
: interface statistics, displaying QR-55
: minimum threshold values (table) QR-44
: parameters QR-43
: See also DWRED

write memory command

: See copy command

write network command

: See copy command

write terminal command

: See more command

X

X Display Manager Control Protocol

: See XDMCP

X Window System, setting display location DR-488

X.121 address

DDN, caution not to change WR-293

Frame Relay SVC WR-236

numbers, codes and values WR-237

setting WR-330

suppressing

: called address WR-384
: calling address WR-385

use source WR-395

X.25

accept reverse charges WR-329

addresses

: called, suppressing WR-384
: calling
: suppressing WR-385
: updating WR-395
: interface, setting on WR-330
: protocol-to-remote host mapping WR-350

BFE

: encapsulation WR-292
: remote-red setting WR-374

Blacker Emergency Mode WR-332, WR-333

bridging on WR-283, WR-355

compressed packet header WR-357

configuring ISDN

: static TEI DR-863

CUD, interpreting calls with unknown WR-334

DCE device WR-292

DDN encapsulation WR-292

default protocol, setting WR-334

directed broadcasts, configuring BR-87, BR-469, WR-353

DTE device WR-292

encapsulation

: BFE devices WR-293
: DDN WR-293
: methods supported BR-87, BR-469, WR-352

facilities supported BR-469, WR-352

facility handling WR-403

frames, bridging packets in BR-86

hold timer, setting WR-340

hosts, limiting access DR-549, WR-398

input packet size

: maximum, setting WR-345, WR-353
: PVC
: encapsulation maximum WR-365
: switched maximum WR-368, WR-370
: tunnel maximum WR-373
: setting with x25 map command BR-87, BR-469
: window WR-396

interface statistics, displaying WR-310

Interrupt packet DR-896

ISDN over D channel DR-862

: isdn x25 static-tei command DR-863

maintaining WR-286

map options (table) BR-469, WR-352

multiprotocol virtual circuits WR-350

network user ID BR-88, BR-470, WR-353

OSPF BR-87, BR-469, WR-353

output packet size BR-87, BR-469

: maximum, setting WR-353
: PVC
: encapsulation maximum WR-365
: switched maximum WR-368, WR-370
: tunnel maximum WR-373

output window size WR-365, WR-397

packet acknowledgment policy WR-396, WR-397

packet hold queue WR-339

packet-by-packet compression BR-87, BR-469, WR-352

packet-level restarts, forcing WR-347

pad connections, viewing DR-563

PAD link WR-359

precedence handling WR-344

protocol translation options DR-509, DR-519

protocols supported

: routing WR-283
: table WR-351

PVC

: displaying address map WR-316
: options (table) WR-365
: protocols supported (table) WR-365
: states WR-327
: switched options (table) WR-368, WR-370
: tunnel options (table) WR-373

Recognized Operating Agencies lists

: See X.25, ROA

restarting WR-286

ROA

: name and number WR-375

ROA lists BR-88

routing

: local switching WR-383
: remote switching WR-383
: supported protocols WR-283

routing table WR-376

: creating WR-376
: displaying WR-319

split horizon P3R-231

X.25 (continued)

static host name map, defining DR-548, WR-341

subaddress, configuring BR-712

TEI restrictions DR-863

traffic over ISDN D channel

: (example) DR-861

translation options DR-534

tunneling WR-383

user facilities

: accept reverse charging BR-87, BR-469, WR-329, WR-352
: closed user group BR-87, BR-469, WR-335, WR-353
: flow control parameter negotiation WR-335
: network user ID BR-88, BR-470, WR-353
: reverse charging BR-87, BR-469, WR-335, WR-352
: ROA list name, specifying BR-88, BR-470
: ROA per-call basis WR-335
: ROA X.25 map options WR-353
: throughput class negotiation BR-88, BR-470, WR-335, WR-353
: transit delay BR-88, BR-470, WR-335, WR-353

virtual circuits

: clearing WR-343
: displaying address map WR-316
: setting number of BR-87, BR-469, WR-353, WR-361

window modulus WR-360, WR-396, WR-397

window size BR-87, BR-469, WR-353

: PVC option WR-368
: PVC tunnel option WR-373

X.29

: access list, applying to a line WR-284
: Indication of Break packet DR-896
: PAD profile script, creating WR-399
: X.25 hosts, limiting access DR-549, WR-398

X.29 set parameter packet DR-559, DR-566

X.3

: parameter settings, viewing DR-563

X.3 PAD

description DR-566

making connections DR-566

parameters

: action upon receipt of Break signal (7) DR-895
: baud rate (11) DR-896
: changing dynamically DR-557
: character delete (16) DR-898
: data forward character (3) DR-894
: default values DR-559, DR-566
: description DR-557 -DR-559, DR-893
: device control (5) DR-895
: discard output (8) DR-896
: echo mask (20) DR-899
: edit PAD service signals (19) DR-899
: editing (15) DR-898
: escape from data transfer (1) DR-894
: idle timer (4) DR-895
: input flow control (12) DR-897
: line delete (17) DR-898
: line display (18) DR-899
: Line Feed insertion (13) DR-897
: Line Feed padding (14) DR-898
: line folding (10) DR-896
: local echo mode (2) DR-894
: local editing (15) DR-898
: PAD service signals (6) DR-895
: page wait (22) DR-899
: parity treatment (21) DR-899
: return padding (9) DR-896
: setting DR-566
: X.28 mode DR-569

x25 accept-reverse command WR-329

x25 address command WR-330

x25 alias command WR-331

x25 aodi command DR-870

x25 bfe-decision command WR-332

x25 bfe-emergency command WR-333

x25 default command WR-334

x25 facility command WR-335

x25 hic command WR-337

x25 hoc command WR-338

x25 hold-queue command WR-339

x25 hold-vc-timer command WR-340

x25 host command DR-548, WR-341

x25 htc command WR-342

x25 idle command WR-343

x25 ip-precedence command WR-344

x25 ips command WR-345

x25 lic command WR-346

x25 linkrestart command WR-347

x25 loc command WR-348

x25 ltc command WR-349

x25 map bridge command BR-86, WR-355, WR-359

x25 map command WR-350, WR-351

x25 map compressedtcp command WR-357

x25 map pad command WR-359

x25 map ppp command DR-871

x25 map qllc command BR-468

x25 modulo command WR-360

x25 nvc command WR-361

x25 ops command WR-362

x25 pad-access command WR-363

x25 pvc command

: encapsulating WR-364
: switched WR-367
: tunnel WR-372

x25 pvc command (switched PVC to SVC) WR-369

x25 pvc qllc command BR-471

x25 remote-red command WR-374

x25 roa command WR-375

x25 route command WR-376

regular expressions DR-902

: (example) DR-907

x25 routing command WR-383

x25 subaddress command DR-568

x25 suppress-called-address command WR-384

x25 suppress-calling-address command WR-385

x25 t10 command WR-386

x25 t11 command WR-387

x25 t12 command WR-388

x25 t13 command WR-389

x25 t20 command WR-390

x25 t21 command WR-391

x25 t22 command WR-392

x25 t23 command WR-393

x25 th command WR-394

x25 use-source-address command WR-395

x25 win command WR-396

x25 wout command WR-397

x25-dest-address command BR-711

x25-subaddress command BR-712

x28 command DR-569

x29 access-list command DR-549, WR-398

x29 profile command DR-550, WR-399

x3 command DR-566

X3T9.5 specification IR-86

XDMCP, starting XRemote DR-496

Xerox Network Systems

: See XNS

XID

frames

: frequency of transmission, controlling BR-392
: value for the SDLC station, specifying BR-421

specifying for the SDLC station BR-449

xid-block-number command BR-713

xid-id-number command BR-714

xmodem command FR-260

XNS

3Com 3+ hosts P3R-373

access control

: extended P3R-356
: standard P3R-359

access lists, creating

: extended P3R-356
: standard P3R-359

broadcasts

: all-nets P3R-374
: flooding P3R-374, P3R-375, P3R-376
: flooding in 3Com environment P3R-375
: forwarding P3R-377, P3R-380

encapsulation on Token Ring P3R-373

fast switching P3R-388

: cache, displaying entries in P3R-365

filters

: enabling P3R-389
: generic, enabling P3R-372

filters, routing table

: accepting packets P3R-389
: adding networks P3R-382
: updates P3R-385

helpering, configuring P3R-377, P3R-380

IDP P2R-205

interfaces, displaying status P3R-366

load sharing P3R-383

metrics, routing P3R-355, P3R-391

Net/One routing, enabling P3R-378, P3R-391

network connectivity, testing P3R-361, P3R-363

network masks P3R-356

parallel paths, choosing between P3R-383

paths, setting maximum P3R-383

RIP

: enabling P3R-390
: updates
: advertising P3R-385
: receiving P3R-378
: setting timers P3R-393

routes

: delay metrics P3R-378, P3R-391
: learning P3R-378

routing table

: adding entries P3R-382
: displaying entries P3R-368
: updating P3R-393

SMDS, configuring over WR-274

standard routing, enabling P3R-384, P3R-390

static routes, adding to routing table P3R-386

Token Ring encapsulation P3R-373

traffic statistics, displaying P3R-370

xns access-group command P3R-372

xns encapsulation command P3R-373

xns flood broadcast allnets command P3R-374

xns flood broadcast net-zero command P3R-375

xns flood specific allnets command P3R-376

xns forward-protocol command P3R-377

xns hear-rip command P3R-378, P3R-391

xns helper-address command P3R-380

xns input-network-filter command P3R-382

xns maximum-paths command P3R-383

xns network command P3R-384

xns output-network-filter command P3R-385

xns route command P3R-386

xns route-cache command P3R-388

xns router-filter command P3R-389

xns routing command P3R-390

xns ub-emulation command P3R-391

xns update-time command P3R-393

XOT

: clearing/terminating WR-288
: VCs, displaying information WR-328

XRemote

: automatic session startup DR-492 -DR-496
: buffer size, changing DR-493
: connecting to host computer DR-488
: connections to servers DR-488
: connections, displaying DR-456
: description DR-363, DR-488, DR-492, DR-496
: font servers, identifying DR-494
: manual session startup DR-488
: reenabling manually DR-488
: returning to EXEC prompt DR-488
: sessions between servers DR-490
: setting X display location DR-488
: starting clients DR-488
: terminal line statistics, displaying DR-456
: terminating the session DR-488

xremote command DR-488

xremote lat command DR-492

XRemote terminal

: configuring DR-489

xremote tftp buffersize command DR-493

xremote tftp host command DR-494

xremote tftp retries command DR-495

xremote xdm command DR-496

Z

ZIP

: query interval P2R-98
: reply filter, creating P2R-99

Zone Information Protocol

: See ZIP

zones

: NBP P2R-8
: See also AppleTalk, zone

Table of Contents