|
|
This document contains the following sections:
Extended dialog mode for packet assembler/disassembler (PAD) service signals is now available in the French language as well as English with the PAD French Enhancement feature. The French language service signals maintained in a table. When configured for French language via PAD parameter 6, the PAD service signals map to this table, giving the appropriate French equivalent output. The internal table maintenance is based on the contents of the Annex-C/X.28 standard. Section 3.5/X.28 outlines Parameter 6 and how it relates to extended mode dialog in multiple languages.
Service signal diagnostics can now be understood in French.
Other documents related to this feature include the ITU Recommendations for X.28 and the "X.28 Emulation" chapter in the Cisco IOS Release Notes for 11.2(4)F publication.
No new or modified MIBs are supported by this feature.
For descriptions of supported MIBs and how to use MIBs, see the Cisco MIB web site on CCO at http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml.
None
This section contains configuration tasks for the PAD French Enhancement feature on parameter 6. Perform one of the following tasks:
| Step | Command | Purpose | ||
|---|---|---|---|---|
| Router #x28 | Enters X.28 mode. | ||
| *set 6:9 | Sets the value of parameter 6 to 9 for French recognition. |
| Step | Command | Purpose | ||
|---|---|---|---|---|
| Router(config)#x29 profile profilename 6:9 | Sets the value of parameter 6 to 9 (on a defined set of X.3 parameters) for French recognition in an X.29 profile. |
To verify that PAD French enhancement has been configured, enter the parameter command in X.28 EXEC mode (for either X.28 or X.29 profiles):
* parameter PAR 1:1 2:1 3:16 4:0 5:1 6:9 7:2 8:0 9:1 10:0 11:4 12:1 13:0 14:0 15:0 16:12 17:2 18:1
This section provides the following configuration examples:
The following example shows PAD French enhancement being set in X.28 EXEC mode:
Router #x28 *set 6:9
The following example shows PAD French Enhancement being set with an X.29 profile:
Router(config)#x29 profile Primary 6:9
No commands were created or modified for this feature.
PAD---packet/assembler disassembler. Device used to connect simple devices (like character-mode terminals) that do not support the full functionality of a particular protocol to a network. PADs buffer data and assemble and disassemble packets sent to such end devices.
X.25---ITU-T standard that defines how connections between data terminal equipment (DTE) and data communications equipment (DCE) are maintained for remote terminal access and computer communications in public data networks (PDNs). X.25 specifies LAPB, a data link layer protocol, and Packet Level Protocol (PLP), a network link layer protocol.
X.28---ITU-T recommendation that defines the terminal-to-PAD interface in X.25 networks.
X.29---ITU-T recommendation that defines the form for control information in the terminal-to-PAD interface used in X.25 networks.
X.3---ITU-T recommendation that defines various PAD parameters used in X.25 networks.
Posted: Mon Jul 26 15:24:58 PDT 1999
Copyright 1989-1999©Cisco Systems Inc.