|
|
This feature adds a time-of-day service to the cable headend system.
Standalone cable headend systems can obtain the correct time of day from larger systems as part of an low-maintenance, background function.
Time server support is restricted to service over UDP.
Cisco uBR7200 Series
None
RFC868
To configure the time-of-day service simply configure the cable time server.
None
This section documents new commands. All other commands used with this feature are documented in the Cisco IOS Release 12.0 command references.
To enable the time-of-day server, use the cable time-server global CONFIG command. Use the no form of this command to disable the time-of-day service function.
cable time-server [enable | disable]
enable | Starts the time-of-day server as a background task. |
disable | Stops the time-of-day server. |
disable
Global CONFIG
| Release | Modification |
|---|---|
12.0(4)XI | This command was introduced. |
The following example enables the time-of-day server:
Router(config)#cable time-server enable
Posted: Tue Oct 26 12:04:51 PDT 1999
Copyright 1989-1999©Cisco Systems Inc.