|
|
When you launch VlanDirector from the CWSI map window, VlanDirector adds options to the Map Highlighting box in the CWSI map window. The VLAN option allows you to display information about a selected VLAN. See Chapter 6, "Displaying LANE Components in the CWSI Map." If you have an ATM network, the LANE option allows you to display information about your ATM devices. Figure 7-1 shows the CWSI map window with the VLAN and LANE map highlighting options.
Click on an ATM VLAN name in the Names window to display devices and links that belong to the selected ATM VLAN in the CWSI map window. You can select multiple ATM VLANs by pressing Ctrl and clicking on the ATM VLAN names.
Click the & button in the VlanDirector toolbar to display all members of the VLANs selected in the Names window. Click the / button to display only common members of the VLANs selected in the Names window.
The VLAN is displayed in the color that it was assigned when it was created.
To display additional information about an ATM VLAN using the LANE map highlighting options, take the following steps:
Step 1 Select an ATM VLAN in the Names window in VlanDirector.
The ATM VLAN is highlighted in its assigned color on the CWSI map.
Step 2 Click the plus sign next to LANE.
The Client, LE Server, and Config Server options appear.
Step 3 Click the plus sign, if shown, next to the options to display suboptions, or click the check box to highlight those elements for the selected ATM VLAN on the CWSI map. See Table 7-1 for descriptions of the map highlighting options and suboptions.
| Option | Highlights |
|---|---|
| Client | Clients in the selected ATM VLAN |
| LE Server | |
|
Active servers in the selected ATM VLAN |
|
Backup servers in the selected ATM VLAN |
| Config Server | |
|
Master configuration servers in the selected ATM VLAN |
|
Backup configuration servers for the selected ATM |
See Appendix A, "Understanding LAN Emulation" for additional information about how these LANE components operate in your network.
|
|