|
|
<a name="AD_DB_PSTORE_FAIL"></a>
Record the error and contact your system administrator.
<a name="AD_CONFIG_SERVER_MIB_VALIDATE"></a>
Record the error and contact your system administrator.
<a name="AD_CONFIG_SERVER_SNMP_ERROR"></a>
You may have provided incorrect values for the source and destination VPI/VCI or NSAP address prefix, or the device is not SNMP-reachable. Verify the values you entered and make sure the device has an SNMP agent running and is reachable through its IP address.
<a name="AD_ELAN_SNMP_CB_ERROR"></a>
Record the error and contact your system administrator.
<a name="AD_ELAN_SNMP_SEND"></a>
You may have provided incorrect values for the source and destination VPI/VCI or NSAP address prefix, or the device is not SNMP-reachable. Verify the values you entered and make sure the device has an SNMP agent running and is reachable through its IP address.
<a name="AD_LECS_ATM_TBL"></a>
You may have provided incorrect values for the source and destination VPI/VCI or NSAP address prefix, or the device is not SNMP-reachable. Verify the values you entered and make sure the device has an SNMP agent running and is reachable through its IP address.
<a name="AD_NO_DEVICE"></a>
Record the error and contact your system administrator.
<a name="AD_LECS_REGISTRY"></a>
Record the error and contact your system administrator.
<a name="AD_LECS_MIB_RESOLUTION"></a>
Record the error and contact your system administrator.
<a name="AD_LECS_FETCH"></a>
You may have provided incorrect values for the source and destination VPI/VCI or NSAP address prefix, or the device is not SNMP-reachable. Verify the values you entered and make sure the device has an SNMP agent running and is reachable through its IP address.
<a name="AD_LECS_NO_CONFIG_TABLE"></a>
Record the error and contact your system administrator.
<a name="AD_LECS_DB_MIB_RESOLUTION"></a>
Record the error and contact your system administrator.
<a name="AD_VARBIND_FORMATION"></a>
Record the error and contact your system administrator.
<a name="AD_LECS_DB_FETCH"></a>
Record the error and contact your system administrator.
<a name="AD_LECS_DB_VARBIND_VALIDATION"></a>
Record the error and contact your system administrator.
<a name="AD_LECS_SNMP_FETCH"></a>
You may have provided incorrect values for the source and destination VPI/VCI or NSAP address prefix, or the device is not SNMP-reachable. Verify the values you entered and make sure the device has an SNMP agent running and is reachable through its IP address.
<a name="AD_LES_MIB_VALIDATION"></a>
Record the error and contact your system administrator.
<a name="AD_LES_SNMP_FETCH"></a>
You may have provided incorrect values for the source and destination VPI/VCI or NSAP address prefix, or the device is not SNMP-reachable. Verify the values you entered and make sure the device has an SNMP agent running and is reachable through its IP address.
<a name="AD_LECS_MAC_TBL"></a>
You may have provided incorrect values for the source and destination VPI/VCI or NSAP address prefix, or the device is not SNMP-reachable. Verify the values you entered and make sure the device has an SNMP agent running and is reachable through its IP address.
<a name="AD_LEC_STATUS"></a>
Record the error and contact your system administrator.
<a name="AD_LEC_STATUS_SNMP_FETCHSNMP"></a>
Record the error and contact your system administrator.
<a name="AD_LES_MIB_VALIDATION"></a>
Record the error and contact your system administrator.
<a name="AD_LES_STATUS_SNMP_FETCH"></a>
You may have provided incorrect values for the source and destination VPI/VCI or NSAP address prefix, or the device is not SNMP-reachable. Verify the values you entered and make sure the device has an SNMP agent running and is reachable through its IP address.
<a name="AD_LES_STATUS_FETCH"></a>
Record the error and contact your system administrator.
<a name="AD_BUS_VC_RESOLUTION"></a>
Record the error and contact your system administrator.
<a name="AD_BUS_VC_FETCH"></a>
Record the error and contact your system administrator.
<a name="AD_BUS_VC_VALIDATION"></a>
Record the error and contact your system administrator.
<a name="AD_BUS_VC_SNMP_FETCH"></a>
You may have provided incorrect values for the source and destination VPI/VCI or NSAP address prefix, or the device is not SNMP-reachable. Verify the values you entered and make sure the device has an SNMP agent running and is reachable through its IP address.
<a name="AD_LECS_VC_RESOLUTION"></a>
Record the error and contact your system administrator.
<a name="AD_LECS_VC_SNMP_FETCH"></a>
You may have provided incorrect values for the source and destination VPI/VCI or NSAP address prefix, or the device is not SNMP-reachable. Verify the values you entered and make sure the device has an SNMP agent running and is reachable through its IP address.
<a name="AD_LEC_VC_RESOLUTION"></a>
Record the error and contact your system administrator.
<a name="AD_LEC_VC_SNMP_FETCH"></a>
You may have provided incorrect values for the source and destination VPI/VCI or NSAP address prefix, or the device is not SNMP-reachable. Verify the values you entered and make sure the device has an SNMP agent running and is reachable through its IP address.
<a name="AD_LEC_DATA_VC_RESOLUTION"></a>
Record the error and contact your system administrator.
<a name="AD_LES_VC_RESOLUTION"></a>
Record the error and contact your system administrator.
<a name="AD_LES_VC_VALIDATION"></a>
Record the error and contact your system administrator.
<a name="AD_LES_VC_SNMP_FETCH"></a>
You may have provided incorrect values for the source and destination VPI/VCI or NSAP address prefix, or the device is not SNMP-reachable. Verify the values you entered and make sure the device has an SNMP agent running and is reachable through its IP address.
<a name="AD_LEC_SUMM_VALIDATION"></a>
Record the error and contact your system administrator.
<a name="AD_LEC_SUMM_SNMP_FETCH"></a>
You may have provided incorrect values for the source and destination VPI/VCI or NSAP address prefix, or the device is not SNMP-reachable. Verify the values you entered and make sure the device has an SNMP agent running and is reachable through its IP address.
<a name="AD_LECS_SUMM_VALIDATION"></a>
Record the error and contact your system administrator.
<a name="AD_LECS_SUMM_SNMP_FETCH"></a>
You may have provided incorrect values for the source and destination VPI/VCI or NSAP address prefix, or the device is not SNMP-reachable. Verify the values you entered and make sure the device has an SNMP agent running and is reachable through its IP address.
<a name="AD_LECS_SUMM_FETCH"></a>
Record the error and contact your system administrator.
<a name="AD_NO_LES"></a>
Record the error and contact your system administrator.
<a name="AD_LES_SUMM_VALIDATION"></a>
Record the error and contact your system administrator.
<a name="AD_LES_SUMM_SNMP_FETCH"></a>
You may have provided incorrect values for the source and destination VPI/VCI or NSAP address prefix, or the device is not SNMP-reachable. Verify the values you entered and make sure the device has an SNMP agent running and is reachable through its IP address.
<a name="AD_NO_LES_ON_NODE"></a>
Select a node that contains an LE server and repeat the command.
<a name="AD_NO_BUS_ON_NODE"></a>
Select a node that contains a broadcast server and repeat the command.
<a name="AD_NO_LES_ON_NODE"></a>
Select a node that contains a configuration server and repeat the command.
<a name="AD_NO_LEC_ON_NODE"></a>
Select a node that contains a client and repeat the command.
<a name="AD_LES_SUMM"></a>
Record the error and contact your system administrator.
<a name="AD_CNTRL_VC"></a>
Record the error and contact your system administrator.
<a name="AD_NO_MASTER_LES"></a>
Record the error and contact your system administrator.
<a name="AD_DATA_VC"></a>
Record the error and contact your system administrator.
<a name="AD_ARP"></a>
Record the error and contact your system administrator.
<a name="AD_LEC_STATUS"></a>
Record the error and contact your system administrator.
<a name="AD_LES_STATUS"></a>
Record the error and contact your system administrator.
<a name="AD_BUS_PERF"></a>
Record the error and contact your system administrator.
<a name="AD_LEC_PERF"></a>
Record the error and contact your system administrator.
<a name="AD_CORE_PERF"></a>
Record the error and contact your system administrator.
<a name="AD_NO_CONNECTING_DEV"></a>
Record the error and contact your system administrator.
<a name="AD_NO_LECS"></a>
Record the error and contact your system administrator.
<a name="AD_NO_LEC"></a>
Record the error and contact your system administrator.
<a name="AD_NO_ROW_SELECTION_IN_TRACE"></a>
Select a table row and repeat the command.
<a name="AD_NO_CORELINK_FOR_ELAN_VC"></a>
Record the error and contact your system administrator.
<a name="AD_DISPLAY_INFO"></a>
Record the error and contact your system administrator.
<a name="AD_NODE_SELECTION_FOR_DESCRIBE"></a>
Select only one object and repeat the command.
<a name="AD_NO_ROW_SELECTION_IN_DESCRIBE"></a>
Select a table row and repeat the command.
<a name="AD_NO_LECS_INFO"></a>
Record the error and contact your system administrator.
<a name="AD_NO_ELAN_IN_SELECTION"></a>
Select a row that contains an ATM VLAN and repeat the command.
<a name="AD_NO_LES"></a>
Record the error and contact your system administrator.
<a name="AD_NO_ELANS"></a>
There are no ELANs defined in the database
<a name="AD_LECSDB_NO_ELAN_SELECTED"></a>
Select an ATM VLAN and repeat the command.
<a name="AD_RM_LESS_MEMORY"></a>
Choose a device with at least 32 megabytes of memory to do data collection.
<a name="AD_RM_NOT_ENABLED"></a>
Click OK to enable data collection.
<a name="AD_RM_ALREADY_ENABLED"></a>
You do not need to take any action to enable data collection on that device.
<a name="AD_RM_CANT_ENABLE"></a>
Check the specified device, or contact your system administrator.
<a name="AD_RM_DISABLE"></a>
For better performance, click OK to stop collecting unneeded data.
<a name="AD_PREFIX_ADDRESS_FORMAT"></a>
Correct the format of the prefix address and repeat the command.
<a name="AD_NOTHING_SELECTED"></a>
Choose another row and repeat the command.
<a name="AD_FAILED_TO_ADD_ROW"></a>
Record the error and contact your system administrator.
<a name="AD_ADDED_ROW"></a>
This is an informational message. No action is required.
<a name="AD_DELETED_ROW"></a>
This is an informational message. No action is required.
<a name="AD_ROW_EXISTS"></a>
Choose another row to add and repeat the command.
<a name="AD_ADDRESS_SUMMARY_ADD"></a>
This is an informational message; no action is required.
<a name="AD_ADDRESS_SUMMARY_MODIFY"></a>
This is an informational message; no action is required.
<a name="AD_ADDRESS_SUMMARY"></a>
This is an informational message; no action is required.
<a name="AD_REACHABLE_ADDR"></a>
This is an informational message; no action is required.
<a name="AD_NODE_CONFIG"></a>
This is an informational message; no action is required.
<a name="AD_LINK_INFORMATION"></a>
This is an informational message; no action is required.
<a name="AD_SELECT_TWO_NODES_NBR"></a>
You selected less than two nodes. Select two nodes and repeat the command.
<a name="AD_SELECT_TWO_NODES_NBR_ONLY"></a>
You selected more than two nodes. Select two nodes and repeat the command.
<a name="AD_NBR_PEER"></a>
This is an informational message; no action is required.
<a name="AD_INTERFACE_TUNING"></a>
This is an informational message; no action is required.
<a name="AD_SCOPE_MAPPING"></a>
This is an informational message; no action is required.
<a name="AD_TUNINGADD_INTERNAL"></a>
Record the error and contact your system administrator.
<a name="AD_CBR_WRONG_FORMAT"></a>
Correct the format and repeat the command.
<a name="AD_RTVBR_WRONG_FORMAT"></a>
Correct the format and repeat the command.
<a name="AD_NRTVBR_WRONG_FORMAT"></a>
Correct the format and repeat the command.
<a name="AD_ABR_WRONG_FORMAT"></a>
Correct the format and repeat the command.
<a name="AD_UBR_WRONG_FORMAT"></a>
Correct the format and repeat the command.
<a name="AD_UNABLE_TONARROW_ATMD"></a>
Record the error and contact your system administrator.
<a name="AD_FAILED_MODIFY_INTERFACE"></a>
Record the error and contact your system administrator.
<a name="AD_MODIFIED_INTERFACE"></a>
This is an informational message; no action is required.
<a name="AD_ROW_EXISTS"></a>
Choose a different row to add and repeat the command.
<a name="AD_TUNING_SOMETHING_WRONG"></a>
Record the error and contact your system administrator.
<a name="AD_TUNING_ADD"></a>
This is an informational message; no action is required.
<a name="AD_TUNING_MODIFY"></a>
This is an informational message; no action is required.
<a name="AD_NODE_INFO"></a>
This is an informational message; no action is required.
<a name="AD_SET_SUCCESS"></a>
This is an informational message; no action is required.
<a name="AD_SET_FAILED"></a>
Record the error and contact your system administrator.
<a name="AD_NYI"></a>
This feature is not currently implemented.
<a name="AD_PNNI_LEVEL_WRONG"></a>
Enter an appropriate value for the PNNI level and repeat the command.
<a name="AD_DATA_NOT_CHANGED"></a>
This is an informational message; no action is required.
<a name="AD_DATA_MODIFIED"></a>
This is an informational message; no action is required.
<a name="AD_PTSE_REFRESH"></a>
Enter a value within the required range and repeat the command.
<a name="AD_PTSE_LIFE_TIME_FACTOR"></a>
Enter a value within the required range and repeat the command.
<a name="AD_PTSE_HOLDDOWN"></a>
Enter a value within the required range and repeat the command.
<a name="AD_HELLO_INTERVAL"></a>
Enter a value within the required range and repeat the command.
<a name="AD_HELLO_INTERVAL_FACTOR"></a>
Enter a value within the required range and repeat the command.
<a name="AD_HELLO_HOLDDOWN"></a>
Enter a value within the required range and repeat the command.
<a name="AD_CR_MULT_WRONG"></a>
Enter a value within the required range and repeat the command.
<a name="AD_CDV_MULTIFICATION_FACTOR"></a>
Enter a value within the required range and repeat the command.
<a name="AD_CDT_MULTIFICATION_FACTOR"></a>
Enter a value within the required range and repeat the command.
<a name="AD_TX_INTERVAL"></a>
Enter a value within the required range and repeat the command.
<a name="AD_PEER_DELAY"></a>
Enter a value within the required range and repeat the command.
<a name="AD_CR_MINIMUM"></a>
Enter a value within the required range and repeat the command.
<a name="AD_UNI_LEVEL_OUTOF_RNAGE"></a>
Enter a value within the required range and repeat the command.
<a name="AD_REACHABLE_ADDR_INTERNAL"></a>
Record the error and contact your system administrator.
<a name="AD_REACHABLE_ADDR_ADD_INTERNAL"></a>
Record the error and contact your system administrator.
<a name="AD_REACHABLE_ADDR_CONVERSION"></a>
Record the error and contact your system administrator.
<a name="AD_ALL_NODES"></a>
This is an informational message; no action is required.
<a name="AD_ALL_MODIFICATION_LOST"></a>
Click OK if you really want to select a new advertising node and cancel all the changes you made.
<a name="AD_DISCARD_CHANGE"></a>
Click OK to cancel all the changes you made.
<a name="AD_DELETE_SELECTED_ROW"></a>
Verify that you want to delete the table row and click OK.
<a name="AD_FAILED_TO_ADD_ROW"></a>
Record the error and contact your system administrator.
<a name="AD_FAILED_TO_SCOPE_MAPPING"></a>
Record the error and contact your system administrator.
<a name="AD_MESSAGE"></a>
This is an informational message; no action is required.
<a name="AD_NOTHING_SELECTED_UPDATE"></a>
Select an appropriate row and repeat the command.
<a name="AD_NOTHING_SELECTED_CONTINUE"></a>
Click OK to continue without making a selection.
<a name="AD_SELECTED_ROW_APPLIED"></a>
Selected the desired table row and repeat the command.
<a name="AD_SELECTED_ROW_DELETE"></a>
Selected the desired table row and repeat the command.
<a name="AD_SELECTED_ROW_MODIFIED"></a>
Selected the desired table row and repeat the command.
<a name="AD_SELECTED_ROW"></a>
Selected the desired table row and repeat the command.
<a name="AD_PNNI_SCOPE_WRONG"></a>
Enter an appropriate value for the PNNI scope and repeat the command.
<a name="AD_REACHABLE_ADDR_ADD"></a>
This is an informational message; no action is required.
<a name="AD_REACHABLE_ADDR_MODIFY"></a>
This is an informational message; no action is required.
<a name="AD_ADMIN_DOWN_MESSAGE"></a>
If you wish to continue, and lose all PNNI information, click OK.
<a name="AD_SCOPE_MAPPING_SUCCESS"></a>
This is an informational message; no action is required.
<a name="AD_VALUE_NOT_DECREASE"></a>
Re-order the values and repeat the command.
<a name="AD_WARNING"></a>
This action may result in lost configuration data or network traffic.
<a name="AD_NOMATCHING_VC"></a>
No VCs were found that matched your criteria. Change the criteria and repeat the command.
<a name="AD_ATMADDRESSWRONG"></a>
Change the addresses to specify active ATM devices and repeat the command.
<a name="AD_TRACENOENDNODE"></a>
You must define an end node before proceeding.
<a name="AD_SNMPDATA"></a>
You may have provided incorrect values for the source and destination VPI/VCI or NSAP address prefix, or the device is not SNMP-reachable. Verify the values you entered and make sure the device has an SNMP agent running and is reachable through its IP address.
<a name="AD_SNMPUNREACHABLE"></a>
You may have provided incorrect values for the source and destination VPI/VCI or NSAP address prefix, or the device is not SNMP-reachable. Verify the values you entered and make sure the device has an SNMP agent running and is reachable through its IP address.
<a name="AD_SNMPDEVICEBUSY"></a>
Wait a few minutes and try the operation again.
<a name="AD_SNMPINVALIDDATA"></a>
Record the error and contact your system administrator.
<a name="AD_ORB_INIT_FAILED"></a>
Record the error and contact your system administrator.
<a name="AD_ORB_EC_BIND_OK"></a>
This is an informational message; no action is required.
<a name="AD_ORB_EC_BIND_FAILED"></a>
Record the error and contact your system administrator.
<a name="AD_ORB_EC_RECONNECT"></a>
This is an informational message; no action is required.
<a name="AD_ORB_EC_DISCONNECT"></a>
Record the error and contact your system administrator.
<a name="AD_EVENTS_RCVD_EVENT"></a>
This is an informational message; no action is required.
<a name="AD_EVENTS_TRANS_COMPLETE"></a>
This is an informational message; no action is required.
<a name="AD_EVENTS_DBREADY"></a>
This is an informational message; no action is required.
<a name="AD_EVENTS_DBRELOAD"></a>
Record the error and contact your system administrator.
<a name="AD_ORB_RT_BIND_OK"></a>
This is an informational message; no action is required.
<a name="AD_ORB_RT_BIND_FAILED"></a>
Record the error and contact your system administrator.
<a name="AD_ORB_RT_DISCONNECT"></a>
Record the error and contact your system administrator.
<a name="AD_RT_INVALIDARG"></a>
Check the values you entered for validity and repeat the command.
<a name="AD_RT_NOSUCHFUNCTION"></a>
Record the error and contact your system administrator.
<a name="AD_RT_FUNCEXECERROR:"></a>
Record the error and contact your system administrator.
<a name="AD_RT_FUNCABORTED"></a>
Record the error and contact your system administrator.
<a name="AD_SPVC_NO_TRAFFIC_PARMS"></a>
Select the appropriate parameters and repeat the command.
<a name="AD_SPVC_INVALID_SRC_VPI"></a>
Enter an appropriate value for this parameter and repeat the command.
<a name="AD_SPVC_INVALID_SRC_VCI"></a>
Enter an appropriate value for this parameter and repeat the command.
<a name="AD_SPVC_INVALID_DST_VPI"></a>
Enter an appropriate value for this parameter and repeat the command.
<a name="AD_SPVC_INVALID_DST_VCI"></a>
Enter an appropriate value for this parameter and repeat the command.
<a name="AD_SPVC_SUCCESS"></a>
This is an informational message; no action is required.
<a name="AD_SPVC_FAILED"></a>
Record the error and contact your system administrator.
<a name="AD_SPVP_SUCCESS"></a>
This is an informational message; no action is required.
<a name="AD_SPVP_FAILED"></a>
Record the error and contact your system administrator.
<a name="AD_SPVC_DEL_CONFIRM"></a>
Click OK to delete the SPVC.
<a name="AD_SPVC_OS_ACTIVE"></a>
This is an informational message; no action is required.
<a name="AD_SPVC_OS_DOWN"></a>
This is an informational message; no action is required.
<a name="AD_SPVC_OS_UNKNOWN"></a>
This is an informational message; no action is required.
<a name="AD_OAMPING_GENERAL"></a>
Close the ATMDirector application and start it again.
<a name="AD_OAMPING_INVALID_DST_ADDR"></a>
Reenter the address in the proper format and repeat the command.
<a name="AD_OAMPING_SUCCESS"></a>
This is an informational message; no action is required.
<a name="AD_OAMPING_FAILED"></a>
Record the error and contact your system administrator
<a name="AD_OAMPING_POLL_FAIL"></a>
Record the error and contact your system administrator
<a name="AD_OAMPING_NOROW_DEL"></a>
You did not select a table row to delete. Select a row and repeat the command.
<a name="AD_OAMPING_NOVPIVCI"></a>
Record the error and contact your system administrator
<a name="AD_OAMPING_INVALID_VPI"></a>
Enter a value in the proper format and repeat the command.
<a name="AD_OAMPING_INVALID_VPIVCI"></a>
Enter a value in the proper format and repeat the command.
<a name="AD_OAMPING_INVALID_TIMEOUT</a>
Enter a value in the proper format and repeat the command.
<a name="AD_OAMPING_INVALID_DELAY"></a>
Enter a value in the proper format and repeat the command.
<a name="AD_OAMPING_INVALID_CELLS"></a>
Enter a value in the proper format and repeat the command.
<a name="AD_OAMPING_INVALID_DSTTYPE"></a>
Enter a value in the proper format and repeat the command.
<a name="AD_VCL_NOROW_DEL"></a>
You did not select a row. Select a row in the table and repeat the command.
<a name="AD_VCL_GETTING_DATA"></a>
This is an informational message; no action is required.
<a name="AD_VCL_UTILDATA"></a>
This is an informational message; no action is required.
<a name="VCL_NOROW_TRACE"></a>
You did not select a row. Select a row in the table and repeat the command.
<a name="VCL_NOLINK"></a>
You have not selected any links. Select a link and repeat the command.
<a name="VCL_ONELINK"></a>
You have selected more than one link.Select only one link and repeat the command.
|
|