|
|
Before you install COPS QoS Policy Manager (QPM-COPS), ensure that the systems meet the requirements for running QPM-COPS. These sections describe the requirements and procedures for installing QPM-COPS and QPM-PDP (standalone PDP):
 |
Note The QPM-PDP (standalone PDP) product must be purchased and installed separately from the basic QPM-COPS 1.0 package. |
|
Note For information on uninstalling QPM-COPS, see Appendix G. |
Table 3-1 shows the hardware and software requirements for installing QPM-COPS and QPM-PDP.
| Complete QPM-COPS Installation | QPM-PDP (Standalone PDP) Installation |
|---|---|
Pentium 400 MHz processor or better. Works on single or multiple processor machines. | Pentium 400 MHz processor or better. Works on single or multiple processor machines. |
256MB RAM or more. | 128MB RAM or more. |
2 GB or more free hard disk space for CD-One and QPM-COPS installation. (Note that this is enough space for future databases as well.) | 100 MB or more free hard disk space. |
Windows NT4 Workstation or Server with Service Pack 5. | Windows NT4 Workstation or Server with Service Pack 5. |
Microsoft Internet Explorer 5 or higher, or Netscape Navigator 4.6 or higher. |
|
CD-One |
|
A typical QPM-COPS installation includes multiple PDPs spread over the network domain to scale with the number of network devices. PDPs should be installed close to their assigned devices.
The complete COPS QoS Policy Manager includes the QPM-COPS servers, the user interface for all QPM-COPS applications, and the Policy Server (PDP). The "Full Installation" is usually done so that the customer has a complete QPM system (applications, servers, and a PDP) on a single machine. (If you only want to install a PDP, see Installing a PDP.)
|
Note CD One must be installed before you install QPM-COPS. See Installing and Setting Up CD One on Windows NT. |
Before You Begin
|
Note QPM-COPS should not be installed on the same server as CiscoWorks2000 Campus Manager. QPM-COPS should not be installed on a remote network drive. Do not install the Cisco Network Registrar (CNR) application on the system where QPM is installed. |
Procedure
Step 2 If the CD's autorun feature fails to start the installation process, select Start>Run, and enter d:\copsqpm.exe, where d: is the drive letter for your CD-ROM drive. The following page appears on which you have three choices:
|
Note Notice that this CD contains the Full Product Installation as indicated in Figure 3-2. |
Step 3 Click Install Product.
The following page appears:
Step 4 After the Welcome screen, the system checks the following:
If there are any issues that prevent the system from continuing the installation, you will be instructed how to proceed.
Step 5 Follow the on-screen instructions.
You must reboot your computer before you can use QPM-COPS.
The "Policy Server only" installation can be done on several machines that will be used to manage additional (and possibly remote) devices.
Before You Begin
Procedure
Step 2 If the CD's autorun feature fails to start the installation process, select Start>Run, and enter d:\copsqpm.exe, where d: is the drive letter for your CD-ROM drive. The following page appears on which you have three choices:
|
Note Notice that this CD contains the PDP Installation as indicated in Figure 3-4. |
Step 3 Click Install Product. Figure 3-3 appears.
Step 4 The Select Server Host dialog appears. Enter the name of the host on which the QPM Server runs. (See Figure 3-5.)
Step 5 Click Next to continue and complete the installation process.
Posted: Wed Jul 12 10:49:45 PDT 2000
Copyright 1989-2000©Cisco Systems Inc.