Adding Additional Cisco SV+ Hosts to an Existing Configuration

• install the 1.1 Cisco Info Mediator on the new Cisco SV+ host machine(s)

• invoke the $OMNIHOME/bin/nco_pad program to start the Cisco Info Mediator on each new Cisco SV+ host machine(s).

Step 3 On the Cisco Info Server host machine, using the editor of your choice, open the /opt/Omnibus/etc/nco_pa.conf file and create additional entries for each new Cisco SV+ host in the file's Routing Table section, as shown in the following example:

# Routing Table

nco_routing

{

host'<existing SV+ hostname>' 'NCO_PA'

host'<new SV+ hostname1>' 'NCO_PA'

host'<new SV+ hostname2>' 'NCO_PA'

}

Step 4 Refresh the $OMNIHOME/bin/nco_pad process on the Cisco Info Server host:

host# kill -HUP <nco_pad_PID>

Step 6 Right-click on the DetectLookup-<host> option, then select Copy. Change the name of the new copy to reflect the new Cisco SV+ host name, then click on the OK button.

Step 7 Using the new copy, under the Condition tab, change the SQL query to reflect the new Cisco SV+ host name. For example, all <oldhostname>@NNM5 entries should be replaced with <newhostname>@NNM5 and all <oldhostname>@SV+ entries should be replaced with <newhostname>@SV+ in the query.

Step 8 Under the Settings tab, change the name of the Ascent Action to reflect the new Cisco SV+ host name, click on the Apply button, then click on the Close button.

Step 9 Right-click on the GenerateLookup-<hostname> option, then select Copy. Change the name to reflect the new Cisco SV+ hostname, then click on the OK button.

Step 10 Under the External Effect tab, edit the Host field to reflect the new Cisco SV+ hostname, click on the Apply button, then click on the Close button.