|
|
This manual provides you information on how to perform an automated or upgrade installation of Cisco WAN Manager (CWM) 9.2 and its associated software programs on an workstation running the AIX 4.2 operating systems.
This chapter describes the minimum hardware and software requirements for the Cisco CWM 9.2 release. It also provides a list of reference documentation.
Cisco CWM 9.2 for AIX must be installed on an IBM PowerPC. The AIX 4.2 operating system must be installed on the IBM PowerPC before you install Cisco CWM 9.2.
IBM's Netview 5.1 is used to produce Cisco CWM 9.2 topologies and for logging traps. When Netview 5.1 is already installed on your IBM PowerPC, proceed with the installation of Cisco CWM 9.2. Otherwise, you must install Netview 5.1 on the IBM PowerPC before you install Cisco CWM 9.2. For instructions on installing Netview 5.1, refer to the appropriate IBM documentation.
The minimum recommended hard disk and memory configuration requirements are provided in this section.
The Cisco CWM 9.2 NMS workstation requires the IBM AIX 4.2 operating system.
The following software packages are provided on the Cisco CWM Release 9.2 CD:
The Cisco CWM 9.2 NMS workstation interfaces with the following optional software applications:
Cisco CWM 9.2 supports the following Cisco software:
The Cisco WAN Manager Operations includes a thorough explanation in Chapter 13, "Informix Online Database." The Cisco WAN Manager Operations is recommended reading for topics outside the scope of this installation guide.
For complete information on other vendor's software products, refer to the vendor's documentation specific to that product. Refer to the following documents for more information on Cisco CWM 9.2:
Posted: Thu Jun 8 18:56:38 PDT 2000
Copyright 1989 - 2000©Cisco Systems Inc.