Table of Contents

Security Management Requirements
Launching Security Management

Access Privileges

Read Privileges
Create Privileges
Modify Privileges
Delete Privileges
All Privileges

Configuring Profiles

Creating New Profiles
Modifying Profiles
Deleting Profiles

Configuring Users

Adding New Users
Modifying User's Profiles
Deleting Users

Controlled Applications

Security Manager
Connection Manager
Equipment Manager

Line/Trunk Access Privileges
Card Access Privileges
Port Access Privileges
Device Access Privileges

Network Topology
Statistics Collection Manager

Security Management

This chapter provides information about the Security Management application. Security Management provides controlled access to multiple users of Cisco WAN Manager (CWM) based on the users' UNIX User ID and password.

Security Management provides user-access profiles that can be customized for each user. The user-access profile is a list of operations or actions a user can perform coupled with assigned access privileges for each action. A user can be assigned access privileges to read, create (write), modify, or delete, or the user can be assigned all privileges.

To launch the Wingz Reports, Network Browser, CWM Admin, and New Reports applications, users are required to have Read access. Users who have been assigned access privileges will be able to perform CWM management functions depending on their security profile.

Only the svplus user can start and stop the CWM core processes. The svplus user has sufficient access privileges to launch all CWM applications and administer the Security Management application.

Other users can be assigned access privileges that enable them to perform operations within security-controlled applications. These operations can be limited depending on the setting of access privileges by those who administer Security Management. Without the proper access privileges, users cannot launch security-controlled applications.

Security Management Requirements

To use CWM Security Management application, you must first do two things:

• Use the addnewuser script, as root, to add a new Unix userID and password.

You cannot use your existing Unix userID and password.

• Add the new user to the CWM security system as svplus or any other security administrator and assign access privileges through the CWM Security Manager application.

To add a user, complete the following steps:

Step 1 At the CWM console prompt, enter su and provide a password.

host% su

Password: *****

Step 2 At the root prompt, enter the following:

# ./addnewuser <username>

where <username> is the name of the user to add.

Launching Security Management

The Security Management application is launched from the CWM desktop by clicking the Security Management icon. The Security Manager window is displayed as shown in Figure 10-1.

Access Privileges

Security Management is provided at the application level. Users are granted access to controlled applications depending on their access privileges.

Using the Profile Administration window, you can create a security profile to give a user read, create, modify, or delete privileges to one or more of the controlled applications. You can set up a profile to grant all privileges to one of the applications and some privileges to another application. You can create a profile for users who only require read access to enable them to observe an application's windows. In other words, Security Management provides detailed security control. Detailed information about which functions are available is presented with the applications.

The functionality for access privileges depends on the application. Privileges are mapped to different functions in different applications. Table 10-1 lists all access privileges required to use each application.

Read Privileges

With read privileges a user can view displays and topology windows, list connections, and other functions where information is read. Read privileges are similar to the svplus-r account from earlier releases of CWM.

Create Privileges

With create privileges, a user can create and configure connections, perform association backup, and add nodes, ports, and trunks.

Modify Privileges

With modify privileges, a user is also granted read privileges. A user with modify access can modify connections, ports, and trunks, and add and delete nodes and groups.

Delete Privileges

With delete privileges, a user is also granted read privileges. A user with delete access can delete connections, ports, trunks, nodes and groups.

All Privileges

If granted all privileges, a user has read, create, modify and delete privileges for the associated application.

Configuring Profiles

You can provide each user with their own access profile. An access profile is the set of access privileges checked by CWM when a user attempts to launch a security-controlled application. A user's access privileges are applied to CWM applications based on the user's access profile.

Creating New Profiles

You can create profiles to allow users to perform specific tasks within CWM. For example, you can create a profile to give a user read privilege for Network Topology or create and modify privileges for Connection Manager.

You create Profiles through the Profile Administration window. When the Profile Administration window is first displayed, as shown in Profile Administration Window, some boxes are labeled in bold typeface. These are the only boxes that can be selected. The All box can be selected for all CWM applications except Wingz, SV+ Admin (CWM Admin), and Network Browser which allow the Read box to be selected.

To create a new security profile, complete the following steps:

Step 7 To select a specific access privilege, click the All box again to highlight the individual access privileges for that application as shown in Profile Administration - Connection Manager, then select the desired privileges.

Step 8 After selecting all desired access privileges, click Apply to create the new profile.

Modifying Profiles

After a profile has been created, you can easily modify it. To modify an existing profile, complete the following steps:

Step 1 Launch Security Management by clicking its icon on the CWM desktop.

Step 2 From the Security Manager window, select View > Profiles.

Step 3 From the List of All Profiles, select the profile to modify, then click the Modify button.

The Profile Administration window is displayed, listing the selected profile in the Profile field and all supported operations and the five access privileges. The name of the profile cannot be changed.

Step 4 Make any desired changes to the selected access privileges, and click Apply when completed.

Deleting Profiles

After a profile has been created, you can easily delete it. To delete an existing profile, complete the following steps:

Step 1 Launch Security Management by clicking its icon on the CWM desktop.

Step 2 From the Security Manager window, select View > Profiles.

Step 3 From the List of All Profiles, select the profile to delete, then click the Delete button.

Step 4 In the Confirmation dialog window, click OK to delete the selected profile.

The List of All Profiles window is displayed.

Configuring Users

After you select View > User from the Security Manager window, the List of All Users window is displayed, as shown in Figure 10-4. The List of All Users window will be blank unless the user has All access privilege for Security Manager Admin.

When first displayed, only the New button at the bottom of the window is active. The Modify and Delete buttons are inactive until you select one of the listed users.

When you install CWM software, three default users are created:

• svplus

• secadmin

• newuser

Adding New Users

To add a new user, click New on the List of All Users window to display the User Administration window. For new users, all entries are initially blank.

To add a new user, complete the following steps:

Step 1 From the Security Manager window, select View > User, then click New.

The User Administration window is displayed as shown in Security Manager - User Administration Window.

Step 2 On the User Administration window, provide the new user's user ID.

Step 3 Click Profile to select one from a list of predefined profiles.

After selecting a profile to assign to this user, the Apply button will be active. The Access Privileges pane within the User Administration window displays the access privilege settings for each of the four security-controlled applications.

Step 4 Click Apply to assign the profile to the user.

The List of All Users window is displayed, showing the newly added user.

Modifying User's Profiles

To modify a user's profile, complete the following steps:

Step 1 From the Security Manager window, select View > User.

Step 2 Select the user to modify by clicking on the user's name, then click Modify.

The Profile Administration window displays the selected user's current profile and access privileges.

Step 3 Select the desired access privileges and click Apply.

Deleting Users

To delete a user's profile, complete the following steps:

Step 1 From the Security Manager window, select View > User.

Step 2 Select the user to delete by clicking on the user's name, then click Delete.

Step 3 On the confirmation dialog, click Yes to delete the selected user.

Controlled Applications

Multiple users security control is supported on CWM applications launched from the CWM desktop, from HP OpenView, and from the UNIX command line prompt. The following tables list the CWM applications and their supported access privileges. An "X" within an access privilege column indicates that the privilege applies to the operation. If the column is blank, the access privilege does not apply to the operation.

Table 10-2 lists the access privileges required for applications launched from the CWM desktop.

Table 10-2: Desktop Application Security Matrix

Desktop Application	Read	Create	Modify	Delete	All
Network Topology	X	X	X	X	X
Topology Image Download					X
Topology Restore Configuration					X
Topology Save Configuration					X
Wingz	X
Connection Manager GUI	X	X	X	X	X
Network Browser	X
CWM Administrator	X
New Reports	X

Table 10-3 lists the access privileges required for applications launched from the HP OpenView.

Table 10-4 lists the access privileges required for applications launched from the UNIX prompt.

Security Manager

Only users with All access privilege for SV Admin are able to launch the Security Manager application. Users without access privilege will find the Security Manager icon on the CWM desktop to be grey and inactive.

Connection Manager

The CWM Connection Manager is linked to Security Manager which checks a user's access privileges before providing access to Connection Manager. A user without access privileges will find the Connection Manager icon on the CWM desktop to be grey, inactive, and unable to launch the Connection Manager application.

Table 10-11 lists the access privileges required to perform security-controlled operations within the Connections Manager application.

Equipment Manager

The CWM Equipment Manager is linked to Security Manager which checks a user's access privileges before providing access to Equipment Manager or CiscoView. A user without access privileges will not be able to launch Equipment Manager or CiscoView.

Security Manager divides the Equipment Management functions into five separate areas: line, trunk, card, port, and device. You must specify access privileges for each of these separately.

Line/Trunk Access Privileges

Table 10-6 lists the access privileges required for line and trunk management through Equipment Manager and Cisco View.

Card Access Privileges

Table 10-7 lists the access privileges required for card management through Equipment Manager and Cisco View.

Port Access Privileges

Table 10-8 lists the access privileges required for card management through Equipment Manager and Cisco View.

Device Access Privileges

Table 10-9 lists the access privileges required for card management through Equipment Manager and Cisco View

Network Topology

The CWM Network Topology application is linked to Security Manager which checks a user's access privileges before providing access to the Topology application on the CWM desktop. A user without access privileges will find the Topology icon on the CWM desktop to be grey, inactive, and unable to launch the Topology application.

Statistics Collection Manager

The CWM Statistics Collection Manager is linked to Security Manager which checks a user's access privileges before providing access to SCM. A user without access privileges will not be able to launch the SCM application.

Table 10-11 lists the access privileges required to perform security-controlled operations within the SCM application.

Posted: Wed Mar 31 15:17:42 PST 1999
Copyright 1989-1999©Cisco Systems Inc.