|
|
This manual provides information about how to install Cisco WAN Manager 10.3 software on a Sun workstation running the Solaris 2.7 operating system.
The Cisco WAN Manager Installation Guide for Solaris is intended to provide information on how to install and configure the CWM 10.3 product.
The Cisco WAN Manager Installation Guide for Solaris manual is intended for experienced UNIX users who are involved with the installation and configuration of the CWM 10.3 product.
This installation guide has the following chapters and appendices:
An installation guide focuses on installing the product. For complete information on other software products, refer to documentation specific to that product, such as Sun, HP, or Informix documentation for users and administrators.
The following table lists the documentation for the Cisco WAN Manager (CWM) network management system for Release 10.
| Documentation | Description |
|---|---|
Cisco WAN Manager Installation for Solaris, Release 10 DOC-7810308= | Provides procedures for installing Release 10 of the CWM network management system on Solaris systems. |
Cisco WAN Manager User's Guide, Release 10 DOC-7810658= | Provides procedures for operating Release 10 of the CWM network management system. |
Cisco WAN Manager SNMP Service Agent Guide, Release 10 DOC-7810786= | Provides information about the CWM Simple Network Management Protocol Service Agent components and capabilities. |
Cisco WAN Manager Database Interface Guide, DOC-7810785= | Provides the information to gain direct access to the CWM Informix OnLine database that is used to store information about the elements within your network. |
The following tables list the documentation sets for the Cisco WAN Switching products managed by Release 10 of the Cisco WAN Manager (CWM) network management system.
This following table lists documentation related to the installation and operation of the MGX 8850 Release 2 switch and associated products in a Cisco WAN switching network. Table 2 lists the product documentation for the MGX 8850 Release 2 switch.
| Documentation | Description |
Cisco MGX 8850 Hardware Installation, Release 2 DOC-7810351= | Provides a detailed description for installing the MGX 8850 switch in a restricted access location. |
Cisco MGX 8850 Routing Switch Command Reference, Release 2 DOC-7810467= | Describes and lists the user-accessible CLI1 for the MGX 8850 ATM edge switch. |
Cisco MGX 8850 Switch Software Configuration Guide, Release 2 DOC-7810352= | Describes how to configure the MGX 8850 to operate as an ATM core switch or as an ATM edge switch. |
Cisco PXM SNMP Reference, Release 2 DOC-7811276= | Provides information on all supported MIB2 objects, support restrictions, traps, and alarms for the PXM45 Module. |
Cisco AXSM SNMP Reference, Release 2 DOC-7811369= | Provides information on all supported MIB objects, support restrictions, traps, and alarms for the AXSM Module. |
Cisco PNNI SNMP Reference, Release 2 DOC-7811277= | Provides information on all supported MIB objects, support restrictions, traps, and alarms for the PNNI Module. |
| 1CLI = command line interface 2MIB = Management Information Base |
The following table lists the documentation for the CiscoView product that operates with the MGX 8850 Release 2 switch.
| Documentation | Description |
|---|---|
WAN CiscoView for Release 2 of the MGX 8850, Release 3.0 DOC-7810349= | Provides instructions for using WAN CiscoView for the MGX 8850, a network management software application that allows you to perform minor configuration and troubleshooting tasks. |
This table lists related documentation for the installation and operation of the Cisco WAN Switching Software, Release 9.3 and associated equipment in a Cisco WAN switching network.
| Documentation | Description |
Cisco BPX 8600 Series Installation and Configuration DOC-7810674= | Provides a general description and technical details of the |
Cisco IGX 8400 Installation and Configuration DOC-7810722= | Provides installation instructions for the IGX multiband switch. |
Cisco IGX 8400 Series Reference DOC-7810706= | Provides a general description and technical details of the |
Cisco WAN Switching Command Reference DOC-7810703= | Provides detailed information on the general command line interface commands. |
Cisco WAN Switching SuperUser Command Reference DOC-7810702= | Provides detailed information on the command line interface commands requiring SuperUser access authorization. |
Cisco MPLS Controller Software Configuration Guide DOC-7810672= | Provides information on a method for forwarding packets through a network. |
The following table lists the documentation for the CiscoView product that operates with the IGX 8400 and BPX 8600 series of switches.
| Documentation | Description |
|---|---|
WAN CiscoView for the IGX 8400 Switches DOC-7810669= | Provides instructions for using WAN CiscoView for the |
WAN CiscoView for the BPX 8600 Switches DOC-7810670= | Provides instructions for using WAN CiscoView for the |
The following table lists documentation that contains additional information related to the installation and operation of the MGX 8250 Multiservice Gateway and associated equipment in a Cisco WAN switching network.
| Documentation | Description |
Cisco MGX 8250 Multiservice Gateway Installation and Configuration, Release 1.0 DOC-7811217= | Provides installation instructions for the MGX 8250 multiservice gateway. |
Cisco MGX 8250 Multiservice Gateway Command Reference, Release 1.0 DOC-7811212= | Provides detailed information on the general command line interface commands. |
Cisco MGX 8250 Error Messages, Release 1.0 DOC-7811216= | Provides error message descriptions and recovery procedures. |
WAN CiscoView for the MGX 8250 Multiservice Gateway Release 1.1.30 DOC-7811241= | Provides instructions for using WAN CiscoView for the MGX 8250 multiservice gateway. |
The following table lists documentation that contains additional information related to the installation and operation of the MGX 8230 Multiservice Gateway and associated equipment in a Cisco WAN switching network.
| Documentation | Description |
Cisco MGX 8230 Multiservice Gateway Installation and Configuration, Release 1.0 DOC-7811215= | Provides installation instructions for the MGX 8230 multiservice gateway. |
Cisco MGX 8230 Multiservice Gateway Command Reference, Release 1.0 DOC-7811211= | Provides detailed information on the general command line interface commands. |
Cisco MGX 8230 Error Messages, Release 1.0 DOC-7811213= | Provides error message descriptions and recovery procedures. |
WAN CiscoView for the MGX 8230 Multiservice Gateway Release 1.1.30 DOC-7810617= | Provides instructions for using WAN CiscoView for the MGX 8230 multiservice gateway. |
The following table lists documentationthat contains additional information for the understanding, the installation, and the operation of the BPX Service Expansion Shelf (SES).
| Documentation | Description |
|---|---|
WAN CiscoView for the BPX SES PNNI Controller, Release 1.0 DOC-7810657= | Provides general information about using CiscoView to configure the BPX SES PNNI Controller. |
BPX SES PNNI Controller Software Configuration Guide, Release 1.0 DOC-786123= | Describes the BPX SES PNNI Controller hardware, software, services, and configuration procedures for adding PNNI, IISP, ATM SVCs/SVPs, and ATM SPVCs/SPVPs to a BPX 8600 network. |
Cisco Service Expansion Shelf Hardware Installation Guide, Release 1.0 DOC-786122= | Provides instructions for the physical installation of the SES (that is, the BPX SES PNNI Controller). |
Release 1 of the BPX SES PNNI Controller is compatible with Release 9.2.33 of the Cisco WAN switching software. The following table lists documentation that contains information on the BPX 8600 series switch documentation set for Release 9.2.
| Documentation | Description |
|---|---|
Cisco BPX 8600 Series Installation and Configuration, Release 9.2 DOC-786326= | Provides a detailed description of the procedures for installing and configuring a BPX 8600 series switch. |
Cisco BPX 8600 Series Reference, Release 9.2 DOC-786325= | Provides a general reference for the BPX 8600 series switch and the services it provides. |
Cisco WAN Switching Command Reference, Release 9.2 DOC-786721= | Provides detailed information about the WAN command line interface and the commands used to configure the BPX 8600 series switch. |
Cisco WAN Switching SuperUser Command Reference, Release 9.2 DOC-786722= | Provides detailed information about the WAN Switching SuperUser commands. |
The following table lists the documentation for the CiscoView product that operates with the BPX 8600 series of switches running Release 9.2 of Cisco WAN Switching software.
| Documentation | Description |
|---|---|
WAN CiscoView for the BPX 8600 Switches DOC-7810670= | Provides instructions for using WAN CiscoView for the |
This manual uses the following conventions and terminology:
The CWM software supports a three-button mouse. The buttons are configured as follows:
This manual uses this terminology throughout (even though it is possible for individual users to customize their devices to use buttons in an alternative manner).
In situations that allow more than one item to be selected from a list simultaneously, the following actions are supported:
The bold style is also used for keywords, names of commands, and names of keys on the keyboard.
Words and characters that are displayed on-screen are printed in courier font.
When set off from the main text, words and characters you should enter by the keyboard are printed in courier font in a bold style. When the word or character string is enclosed in angle brackets (< and >), you should substitute your own character string for the example presented in the text. When referenced in body text, the word is presented in the normal bold font (not courier).
For example, when you see:
login: root
you should enter the string root at the login prompt. However, when you see:
password: <rootpassword>
you should enter your own password in place of the character string <rootpassword>.
Command descriptions use these conventions:
Examples use these conventions:
screen font.
Notes, tips, cautions, and warnings use the following conventions and symbols:
 |
Note Means reader take note. Notes contain helpful suggestions or references to materials not contained in this manual. |
 |
TimeSaver Means the described action saves time. You can save time by performing the action described in the paragraph. |
 |
Caution Means reader be careful. In this situation, you might do something that could result in equipment damage or loss of data. |
Cisco documentation and additional literature are available in a CD-ROM package, which ships with this product. The Documentation CD-ROM, a member of the Cisco Connection Family, is updated monthly. Therefore, it might be more up-to-date than the printed product documentation. To order additional copies of the Documentation CD-ROM, contact your local sales representative or call Cisco Customer Service. The CD-ROM package is available as a single package or as an annual subscription. You can also access Cisco documentation on the World Wide Web at http://www.cisco.com, http://www-china.cisco.com, or http://www-europe.cisco.com.
When you are reading Cisco product documentation on the World Wide Web, you can submit comments electronically. Click on Feedback in the tool bar, select Documentation, then click on Enter the feedback form. After you complete the form, click on Submit to send it to Cisco. We appreciate your comments.
You can access the most current Cisco documentation on the World Wide Web at http://www.cisco.com, http://www-china.cisco.com, or http://www-europe.cisco.com.
Cisco documentation and additional literature are available in a CD-ROM package, which ships with your product. The Documentation CD-ROM is updated monthly. Therefore, it is probably more current than printed documentation. The CD-ROM package is available as a single unit or as an annual subscription.
Registered CCO users can order the Documentation CD-ROM and other Cisco Product documentation through our online Subscription Services at http://www.cisco.com/cgi-bin/subcat/kaojump.cgi.
Nonregistered CCO users can order documentation through a local account representative by calling Cisco's corporate headquarters (California, USA) at 408 526-4000 or, in North America, call 800 553-NETS (6387).
Cisco provides Cisco Connection Online (CCO) as a starting point for all technical assistance. Warranty or maintenance contract customers can use the Technical Assistance Center. All customers can submit technical feedback on Cisco documentation using the web, e-mail, a self-addressed stamped response card included in many printed docs, or by sending mail to Cisco.
Cisco continues to revolutionize how business is done on the Internet. Cisco Connection Online is the foundation of a suite of interactive, networked services that provides immediate, open access to Cisco information and resources at anytime, from anywhere in the world. This highly integrated Internet application is a powerful, easy-to-use tool for doing business with Cisco.
CCO's broad range of features and services helps customers and partners to streamline business processes and improve productivity. Through CCO, you will find information about Cisco and our networking solutions, services, and programs. In addition, you can resolve technical issues with online support services, download and test software packages, and order Cisco learning materials and merchandise. Valuable online skill assessment, training, and certification programs are also available.
Customers and partners can self-register on CCO to obtain additional personalized information and services. Registered users may order products, check on the status of an order and view benefits specific to their relationships with Cisco.
You can access CCO in the following ways:
You can e-mail questions about using CCO to cco-team@cisco.com.
The Cisco Technical Assistance Center (TAC) is available to warranty or maintenance contract customers who need technical assistance with a Cisco product that is under warranty or covered by a maintenance contract.
To display the TAC web site that includes links to technical support information and software upgrades and for requesting TAC support, use www.cisco.com/techsupport.
To contact by e-mail, use one of the following:
Language | E-mail Address |
|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
In North America, TAC can be reached at 800 553-2447 or 408 526-7209. For other telephone numbers and TAC e-mail addresses worldwide, consult the following web site: http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml.
If you are reading Cisco product documentation on the World Wide Web, you can submit technical comments electronically. Click Feedback in the toolbar and select Documentation. After you complete the form, click Submit to send it to Cisco.
You can e-mail your comments to bug-doc@cisco.com.
To submit your comments by mail, for your convenience many documents contain a response card behind the front cover. Otherwise, you can mail your comments to the following address:
Cisco Systems, Inc.
Document Resource Connection
170 West Tasman Drive
San Jose, CA 95134-9883
We appreciate and value your comments.
Posted: Thu Sep 28 16:27:45 PDT 2000
Copyright 1989-2000©Cisco Systems Inc.
