|
|
These release notes contain the following information for ACL Manager 1.1 running on Windows NT:
Use these publications to learn how to install and use ACL Manager:
ACL Manager support is provided for devices running Cisco IOS Releases 10.3 to 12.0 only.
Except for the time zone settings defined in Table 1, ACL Manager supports the CiscoWorks2000 Server time zone settings defined for Resource Manager Essentials 3.0 (refer to Resource Manager Essentials 3.0 Release Notes (Windows NT)). When the server time zone setting is not supported by ACL Manager, you should set the values using GMT.
1 Offset from GMT | 2 Area Covered (Country/City) | 3 Time Zone Setting on Server | 4 Output in Report |
|---|---|---|---|
+10:00, +11:00 | Australia | Brisbane, Melbourne | GMT +10:00, GMT +11:00 |
+9:30 | Australia | Adelaide | GMT +9:30 |
+3:00 | Russia/Moscow | Moscow | GMT +3:00 |
+2:00 | Israel | Israel |
|
+1:00 (DST) | Germany, Italy | Berlin, Rome | GMT +1:00 (DST) |
-4:00 (DST) | Eastern Canada | Atlantic |
|
| DDTS No. | Description | Explanation |
|---|---|---|
None | Removal of ACL Manager 1.0 part of ACL Manager 1.1 installation process | The ACL Manager 1.1 setup program backs up ACL Manager 1.0 data and uninstalls the previous release. Before installing ACL Manager 1.1, ensure that Essentials 3.0 is installed. During the installation of ACL Manager 1.1, you can restore the ACL |
CSCdp29624 | Download Job status: "Download Failed" and the device used is a Catalyst 8510 | You tried to download a rate-limit ACL. |
CSCdp11608 | ACL Manager does not successfully uninstall when using the Uninstall All option with CiscoWorks2000 | Select Start > Settings > Control Panel > Add/Remove Programs and check the drop-down list of programs. If ACL Manager is not uninstalled, contact the Cisco Technical Assistance Center (TAC). |
CSCdm94725 | ACL Manager does not allow the creation of an ACE with "any" as the hostname | ACL Manager recognizes "any" as a keyword. If the wild mask is set to 0.0.0.0, the program should then accept "any" as a hostname. |
CSCdp23354 | The screen goes blank after confirming the deletion of a scenario from the User Scenario List | You can refresh the screen by clicking on any menu item in Essentials. |
| Symptom | Probable Causes | Possible Solution |
|---|---|---|
ACE comments deleted by ACL Manager | The Expand ACE inline command was used on a comment. | Enable the Expand ACE inline function only for templates and ACEs that include classes in their definitions. |
ACL Manager main window is grayed out | Windows NT did not refresh successfully. | Resize the ACL Manager main window to force a refresh. |
Template not visible in Template Selection Window | The Template Selection Window shows a list of Templates specific to the ACL Protocol. This means that if you are on ACL 100, you will see only IP Extended Templates and so on. However, Template Manager will list all templates. Note You have to have administrator privileges to access Template Manager. | Create a template appropriate to the ACL protocol. |
Message: ORG.OMG.CORBA. | Connectivity between the ACL Manager client and server is lost. | Restart both the ACL Manager client and server. |
Error Message: | You tried to start Essentials or ACL Manager before the applications were initialized. | Wait 1 minute for Essentials and ACL Manager processes to start. |
TCP port 15349 is in use. | Use netstat -a -n to view status of TCP port 15349. If the port is in use, change the AclmPort value in aclm.properties. | |
The ACL Manager server is not running. | Select CiscoWorks2000 Server > Administration > Process Management > | |
The JRM or Change Audit processes are not running. | Make sure JRM and Change Audit processes are running. | |
Download Job status: 'Pre- Download Failed" | Device went stale during download. | Step 1 Select Device in ACL Manager. Step 2 Right click and select Refresh Device (refer to user guide). Step 3 Download to the device again. |
Download Job status: "Download Failed" and "Device Results" reports that telnet credentials did not match. | Essentials Telnet and enable passwords do not match device. | Match Telnet and enable passwords in Essentials Inventory with the device. |
TACACS username and password in Essentials do not match device. | If using TACACS, match TACACS username and password in Essentials inventory with the device. Do not specify local username and password in Essentials inventory. |
For answers to frequently asked questions about ACL Manager, refer to the following URL: http://www.cisco.com/warp/public/cc/cisco/mkt/enm/caclm/prodlit/aclm_qp.htm.
Cisco Connection Online (CCO) is Cisco Systems' primary, real-time support channel. Maintenance customers and partners can self-register on CCO to obtain additional information and services.
Available 24 hours a day, 7 days a week, CCO provides a wealth of standard and value-added services to Cisco's customers and business partners. CCO services include product information, product documentation, software updates, release notes, technical tips, the Bug Navigator, configuration notes, brochures, descriptions of service offerings, and download access to public and authorized files.
CCO serves a wide variety of users through two interfaces that are updated and enhanced simultaneously: a character-based version and a multimedia version that resides on the World Wide Web (WWW). The character-based CCO supports Zmodem, Kermit, Xmodem, FTP, and Internet e-mail, and it is excellent for quick access to information over lower bandwidths. The WWW version of CCO provides richly formatted documents with photographs, figures, graphics, and video, as well as hyperlinks to related information.
You can access CCO in the following ways:
For a copy of CCO's Frequently Asked Questions (FAQ), contact cco-help@cisco.com. For additional information, contact cco-team@cisco.com.
Cisco documentation and additional literature are available in a CD-ROM package, which ships with your product. The Documentation CD-ROM, a member of the Cisco Connection Family, is updated monthly. Therefore, it might be more current than printed documentation. To order additional copies of the Documentation CD-ROM, contact your local sales representative or call customer service. The CD-ROM package is available as a single package or as an annual subscription. You can also access Cisco documentation on the World Wide Web at http://www.cisco.com, http://www-china.cisco.com, or http://www-europe.cisco.com.
If you are reading Cisco product documentation on the World Wide Web, you can submit comments electronically. Click Feedback in the toolbar and select Documentation. After you complete the form, click Submit to send it to Cisco. We appreciate your comments.
Posted: Tue Sep 26 02:59:00 PDT 2000
Copyright 1989-2000©Cisco Systems Inc.