|
|
This chapter describes the factors that you should consider before installing CiscoWorks2000 CD One on an HP-UX system. It contains:
If you are installing CiscoWorks2000 for the first time, see the "Performing a New Installation" section. If you are upgrading from a CiscoWorks2000 application, refer to your specific CiscoWorks2000 application installation guide for supported upgrade information and see the "Performing an Upgrade Installation" section.
 |
Note During an upgrade from a CiscoWorks2000 applications, previous product versions are removed, but the database, ANI information, community strings, user and host information, and application-specific data files are preserved and will be restored during the new product version installations. |
You must use the CD One installation program to perform upgrades. See the "Installing CD One" chapter.
The minimum system requirements for the CiscoWorks2000 Server are shown in Table 1-1.
| Requirement Type | Minimum Requirements |
|---|---|
| |
256 MB | |
| |
HP-UX 11.0 | |
Additional software (Optional) | Netscape Navigator 4.61 or 4.7 (if you are using the CiscoWorks2000 desktop on the server system) |
To verify the amount of available disk space in each of the specified partitions and directories, enter:
# df -k directory
Or
# bdf directory
where directory is the partition or directory for which you want to check the available disk space.
The following patch is required:
Use the swlist -l product command to verify that this patch has been applied.
The minimum system requirements for the CiscoWorks2000 client are shown in Table 1-2. For information about configuring client systems, see the "Preparing to Use CD One" chapter.
| Requirement Type | Minimum Requirements | |
|---|---|---|
| ||
128 MB. | ||
| ||
The minimum server requirements for Integration Utility as a standalone system are shown in Table 1-3.
| Requirement Type | Minimum Requirements | |
|---|---|---|
| ||
256 MB | ||
| ||
The minimum client requirements for Integration Utility as a standalone system are shown in Table 1-4.
| Requirement Type | Minimum Requirements | |
|---|---|---|
| ||
64 MB | ||
| ||
Cisco View, a major component of CD One, manages and configures different types of Cisco devices. Refer to Using CiscoView for supported device information.
You can import device information from both local and remote network management systems (NMS). You can import devices remotely from a UNIX system only. The NMS supported for importing device information into the CiscoView application is HP OpenView Network Node Manager. Refer to Using CiscoView and the online help for information about importing devices.
Posted: Mon Jul 3 01:51:32 PDT 2000
Copyright 1989-2000©Cisco Systems Inc.