Table of Contents

Installing CiscoView
Accessing CiscoView
Navigating in CiscoView
Making Selections and Displaying Menus
Using CiscoView

Integrating with Third-Party Vendors

Integration Utility Features
Using the Integration Utility

Integrating New Device Information

Device Support Utility Features
Using the Device Support Utility

CiscoView 5.0

CiscoView 5.0 operates in client-server mode. In a client-server mode, the device package and basic management functionality is centrally located on the CiscoView 5.0 server.

To ensure that you are set up correctly to use CiscoView and perform basic functions within CiscoView, you must perform certain tasks. Refer to the online help for more information about performing these specific tasks. For more information about your setup, refer to the Installing and Setting Up CiscoWorks2000 CD One guide.

Table 2-1 lists tasks required to setup and use CiscoView.

Table 2-1: CiscoView Setup Overview

Task	Description
Installing CiscoView	Install CiscoView from the CD-ROM package and optionally download device packages from CCO.
Accessing CiscoView	Display menus and options to view device and components for configuration and monitoring.
Navigating in CiscoView	Learn to navigate within CiscoView menus.
Making Selections and Displaying Menus	View the graphical representation of the device and selected components to configure and monitor status.
Using CiscoView	Perform tasks such as selecting devices, setting preferences, selecting components, configuring and monitoring devices, and getting help.

Installing CiscoView

Before you can display a device's view for configuration and monitoring, you must install CiscoView from the CD-ROM package. Refer to the Installing and Setting Up CiscoWorks2000 CD One guide for detailed installation instructions. During the installation process, all available device packages are installed for you. This eliminates the need to incrementally select device packages to install. Cisco Systems device packages are periodically updated, and should be downloaded from CCO as they become available.

Accessing CiscoView

Accessing CiscoView is a simple task. Depending on how you are set up, you can access CiscoView:

Navigating in CiscoView

When you start CiscoView, the CiscoView window opens. The following components comprise the CiscoView main window:

Table 2-2 lists CiscoView Navigation options.

Table 2-2: CiscoView Navigation Options

Option	Description
Select Device Drop-Down List Box	Use the Select Device drop-down list box to select and display a device. Either enter a device name or IP address, or select from the recently displayed devices listed. Device names and SNMP read and write community strings are preserved when you open new CiscoView sessions.
Device Commands Buttons	Use the Device Commands buttons to activate device commands unique to the displayed device. The Device Command buttons are described in the online help for each device package.
Main Menu Buttons	Use the Main Menu buttons to perform various CiscoView tasks. Refer to Table 2-3 for more information.
Graphical Device Display Window	Use the Graphical Device Display window to view a graphical display of the device's back or front panel once you select a device. The display shows all device components color-coded according to their current status and refreshed according to your polling frequency. If a hot swap is detected, the device is rediscovered and the display redrawn at the next poll.
Status Bar and Buttons	Use the Status Bar and buttons to display the progress and result of device polling, selections, and so on. Refer to Table 2-4 for more information.

Table 2-4 describes the Status Bar and buttons.

Table 2-4: Status Bar and Buttons

Item	Description
Status Bar	Displays the progress and result of device polling, selections and so on.
System Info Button	Displays system MIB information (name, description, location, contact, and up-time) for a displayed device.
Print Button	Prints the current graphical display.
Color Legend Button	Describes the significance of the colors on the graphical display. Color schemes are: Blue---the port is dormant Orange---the port is down Red---the port failed Yellow---the port has a minor failure Purple---the port is being tested Green---the port is active

Making Selections and Displaying Menus

When you select a device in CiscoView, a graphical representation of the device is displayed. You can view front or back device panel and select different components (cards, ports, power supply) and menu options to configure and monitor status for these devices.

Table 2-5 lists popup menu options.

Table 2-5: Popup Menu Options

Option	Description
Configure	Configures device categories, such as Management, Physical, ARP Table, TCP, and so on.
Monitor	Displays a set of dynamic charts for selected device categories.
Front and Rear	Displays either the front or back device panel. A logical view can also be displayed as defined by the device package.
Resize	Reduces the graphical display down to 90%, 80%, 70%, 60% or 50%. You can resize it back up to 100%.
Refresh	Triggers component polling and display update.
System Info	Displays system MIB information (name, description, location, contact, and up-time) for a displayed device.

Using CiscoView

Once you have installed CiscoView and learned to navigate within CiscoView, you can perform various tasks.

Table 2-6 lists these tasks and descriptions.

Table 2-6: CiscoView Tasks

Task	Description
Starting CiscoView	Depending on your platform, you can start CiscoView: From within CiscoWorks2000, by selecting Device Manager > CiscoView from the CiscoWorks2000 navigation tree. From third-party NMS, such as HP OpenView, providing you have installed the Integration utility.
Selecting a Device	Select a device to view it's graphical representation to configure and monitor it. The device names and SNMP read and write community strings are preserved when you open new CiscoView sessions.
Setting Preferences	Use the Set Preferences option to change certain options within CiscoView. Depending on your security level, you might not be able to use the Set Preferences option. Refer to Table 2-7 for a list of the available options in Setting Preferences.
Selecting a Component	Select a component on the graphical device display to configure and monitor it.
Configuring Your Device	Use the Configure menu to configure multiple categories of information, for example, Interface, Management, Physical, and ARP Table, simultaneously. Different categories of information can be displayed for each device, card, and port. To see the categories of information that can be displayed for each component type, look at the Category pop up menu from the Configuration window. Refer to Table 2-8 for a list of device-specific buttons and their descriptions available within the Configure menu.
Monitoring Your Device	Use the Monitor menu to monitor multiple categories of information, for example, Ethernet collisions, Management, Physical, and ARP Table, simultaneously. The Monitoring dialog is non-modal and resizeable. Refer to Table 2-9 for a list of device-specific buttons and their descriptions available within the Monitor menu.

Table 2-7 lists the available Preference Setting options.

Table 2-7: Preference Setting Options

Option	Description
Setting Community Strings	Use the Preferences Community tab to delete the read and write community strings for the device currently being managed. This lets you enter the read and write community strings for a device after you display the device. If you want to make changes to a device or port setting, but did not specify community string when you first opened the device display, you can enter the community string without exiting and reopening the device window. If a host's community strings are not already defined within CiscoView, you can add them with the CiscoView Community Strings dialog. Otherwise, CiscoView allows you to enter the correct community strings when you try to access the host. If you do not enter a host's community strings when accessing the host, CiscoView uses the default read and write community strings as defined in the SNMP tab.
Setting SNMP Preferences	Use the Preferences SNMP tab to set polling frequency, SNMP timeout and retries, and default read and write community strings. Use the Default Read and Write Community fields to define the community strings that CiscoView automatically uses for device when you do not specify the device's current community strings.
Setting Look and Feel	Use the Preferences Look and Feel tab to select the platform for the graphical device display. Only users with administrators security level can perform such tasks. These options are available: Metal (default- platform dependent) CDE/Motif (UNIX only) Windows (Windows95, Windows98, and Windows NT)

Table 2-8 lists device-specific buttons and descriptions available within the Configure menu.

Table 2-8: Device-Specific Buttons within Configure Menu

Button	Description
OK	Writes modification of all categories to managed device then disposes the dialog
Apply	Writes modification of the current category to managed device
Cancel	Aborts changes and disposes the catalog
Print	Prints the current category
Help	Launches device-specific help
Create	Launches a table row creation dialog
Delete	Deletes selected row from the table

Table 2-9 lists device-specific buttons and their descriptions available within the Monitor menu.

Table 2-9: Device-Specific Buttons within Monitor Menu

Button	Description
Print	Prints the current category
Help	Launches device-specific help
Cancel	Disposes the dialog

Integrating with Third-Party Vendors

Use the Integration utility to integrate Cisco device information and Cisco applications into SNMP management platforms such as HP OpenView Network Node Manager. This utility allows you to launch CiscoView from an SNMP platform even when CiscoView is running on a different machine than the NMS. It also allows you to integrate other applications into NMS menus.

When CiscoView is installed on the same machine as the target NMS, the Integration utility runs as part of a single CiscoView install. However, when the target NMS is installed on a different machine, the utility walks you through the steps required to integrate Cisco device information and applications into an SNMP management platform. You might need to run the Integration utility to:

• Change your CCO login information.

• Change your CiscoWorks2000 or NMS server location.

• Register a new application.

• Change the NMS with which you wish to integrate your Cisco applications.

The following topics are described next:

• Integration Utility Features

• Using the Integration Utility

Integration Utility Features

Use the Integration utility to:

• Download the NMIDB (Network Management Integration Data Bundle) from CCO.

• Prompt for additional configuration information that might not be available to register each application. This information is used to integrate the Cisco applications with the NMS console menu. In some cases, the NMS allows you to double-click on the device icon in the topology map of the NMS console to invoke an application.

• Run an adapter script to integrate the icons, MIBs, and applications into the NMS. You can select an adapter script from the list of NM adapters provided with this utility or you can use a script provided by the NMS vendor with their product.

Using the Integration Utility

You can perform certain tasks using the Integration utility as described in Table 2-10.

Table 2-10: Integration Utility Tasks 

Task	Description
Starting the utility	Depending on your platform, you can start the Integration utility: From a UNIX platform: 1 . Use a Telnet utility to open a connection to the system on which the Integration utility is installed. 2 . Navigate to the CiscoWorks2000 /bin directory. Start the utility by entering ./nmic.sh on the command line. From a Windows platform: Click Start > Programs > Change Integration Options. or 1 . From the command line, navigate to the CiscoWorks2000 /bin directory. Enter the following script on the command line: .\nmic.exe.
Downloading the Data Bundle	The Network Management Integration Data Bundle (NMIDB) contains the icons and configuration files specific to a Cisco device platform. NMIDB also contains MIBs and the application registration information used to register Cisco applications into the NMS. You can download an NMIDB from a file on your local machine, from CCO, or from another system, or use an already downloaded file.
Registering the Applications	The application registration information is used to integrate Cisco applications with the NMS console menu. The Applications Registration dialog box displays user applications that are to be integrated into the NMS menu. This information is then extracted from the NMIDB. There is one tab for each application.
Running the Adapter Script	The Adapter scripts integrate icons, MIBs, and application with NMS. The Choose Adapter dialog box provides both the Adapters available and their descriptions. The adapter script checks whether the NMS exists or not on the machine.

Integrating New Device Information

Use the Device Support utility to integrate new Cisco device information asynchronously with the CiscoView engine, uninstall device packages, install new device packages, or upgrade existing installed packages.

The Device Support utility operates in one of two modes:

• Command Line mode installs all device packages on a source CD and automates device package installations and upgrades.

• Interactive mode displays a list of currently installed device packages and their versions, uninstall one or more packages, install new packages, and upgrade install packages to their higher versions.

The following topics are described next:

• Device Support Utility Features

• Using the Device Support Utility

Device Support Utility Features

Use the Device Support utility to:

Using the Device Support Utility

You can perform various tasks using the Device Support utility.

Table 2-11 lists these tasks and descriptions.

Table 2-11: Device Support Utility Tasks 

Task	Description
Starting the Device Support Utility	Depending on your platform, you can start the Device Support utility: From a UNIX platform, by running the script xdsu from the CSCOpx/bin directory. From a Windows platform, by clicking on Start > Programs > CiscoWorks2000 > Add/Delete Device Support.
Installing Device Packages	The Install Device Packages dialog box installs new device packages or upgrade existing packages. If a given selection does not result in a consistent package repository even with the base packages, that particular section is not allowed. Also, the Device Support utility will not allow you to select a package whose superceding version has already been installed in the package repository. Refer to Table 2-12 for a summary of messages that might be displayed when you perform this task.
Installing and Uninstalling Device Packages	The Device Support utility dialog box shows a list of the device packages that are already installed. It also acts as a launch point for installing and uninstalling device packages.

Table 2-12 lists the device packages message summary.

Table 2-12: Installing Device Package Message Summary

Sample Message	Message Type	Explanation	Message Location
Path/tmp/dir2/x is invalid.	Error	Specified directory is not a valid directory.	Status bar
Found 2 CiscoView packages in the directory /tmp/dir/.	Info	Specified directory is a valid directory.	Status bar
Package C8500 cannot be downgraded to a lower version.	Error	User selects a package whose superceding version has already been installed.	Status bar
Cannot find base package `CDPAddlet' for C8500.	Error	Base package has not been selected.	Status bar
Package "IOS Addlet has been added to install list due to dependencies."	Info	Installer automatically selects a base package.	Status bar
Cannot proceed with install. Reason: Insufficient disk space.	Error	Not enough disk space.	Status Bar

Posted: Tue Nov 23 10:23:04 PST 1999
Copyright 1989-1999©Cisco Systems Inc.