Mounting and Unmounting on Solaris

Step 1 Become the superuser by entering the command su and the root password at the command prompt, or log in as root. The command prompt changes to the pound sign (#).

Step 2 If the /cdrom directory does not already exist, enter the following command to create it:

# mkdir /cdrom

Step 3 Mount the CD-ROM drive.

---

Note The vold process manages the CD-ROM device and performs the mounting. The CD-ROM might automatically mount onto the /cdrom/cdrom0 directory.

---

If you are running File Manager, a separate File Manager window displays the contents of the CD-ROM.

Step 4 If the /cdrom/cdrom0 directory is empty because the CD-ROM was not mounted, or if File Manager did not open a window displaying the contents of the CD-ROM, verify the vold daemon is running by entering:

# ps -e | grep vold | grep -v grep

Step 5 If vold is running, the system displays the process identification number of vold. If the system does not display anything, restart the daemon by entering:

# /usr/sbin/vold &

Step 6 If the vold daemon is running but did not mount the CD-ROM, stop the vold daemon and then restart it. To stop the vold process, you must know the process identification number. If you do not know the process identification number, you can get it by entering:

# ps -ef | grep vold | grep -v grep

Step 7 Stop the vold process by entering:

# kill -15 process_ID_number
 

Step 8 Restart the vold process by entering:

# /usr/sbin/vold &
 

Step 9 If you have problems using the vold daemon, enter the following command to mount the CD-ROM:

# mount -F hsfs -r ro /dev/dsk/cxtyd0sz /cdrom/cdrom0
 

where x is the CD-ROM drive controller number, y is the CD-ROM drive SCSI ID number, and z is the slice of the partition on which the CD-ROM is located.

Step 1 Become the superuser by entering the command su and the root password at the command prompt, or log in as root. The command prompt changes to the pound sign (#).

Step 2 If the /cdrom directory does not already exist, enter:

# mkdir /cdrom

---

Note The vold daemon process manages the CD-ROM device and performs the mounting. The CD-ROM might automatically mount onto the /cdrom/cdrom0 directory.

---

If you are running File Manager, a separate File Manager window displays the contents of the CD-ROM.

Step 4 If the /cdrom/cdrom0 directory is empty because the CD-ROM was not mounted, or if File Manager did not open a window displaying the contents of the CD-ROM, verify that the vold daemon is running by entering:

# ps -e | grep vold | grep -v grep

Step 5 If vold is running, the system displays /usr/sbin/vold. If the system does not display anything, restart the daemon by entering:

# /usr/sbin/vold &
 

Step 6 If the vold daemon is running but did not mount the CD-ROM, stop the vold daemon and then restart it. To stop the vold process, you must know the process identification number. If you do not know the process identification number, you can get it by entering:

# ps -ef | grep vold | grep -v grep
 

Step 7 Stop the vold process by entering:

# kill -15 process_ID_number

Step 8 Restart the vold process by entering:

# /usr/sbin/vold &

Step 9 If you have problems using the vold daemon, enter the following to mount the CD-ROM:

# mount -F hsfs -r ro /dev/dsk/cxtyd0sz /cdrom/cdrom0
 

where x is the CD-ROM drive controller number, y is the CD-ROM drive SCSI ID number, and z is the slice of the partition on which the CD-ROM is located.

Step 10 Use a text editor to create an /etc/dfs/dfstab file, if one does not exist.

Step 11 Add the following line to the /etc/dfs/dfstab file:

share -F nfs -o ro /cdrom/cdrom0

Step 12 Make sure your remote machine is enabled as an NFS server by entering:

# ps -ef | grep nfs | grep -v grep
 

The output of this command shows whether the /usr/lib/nfs/nfsd and /usr/lib/nfs/mountd daemons are running. If they are not running, enable your machine as an NFS server by entering:

# /etc/init.d/nfs.server start
 

If your machine is enabled as an NFS server, enter one of the following:

• # share

• # shareall

Step 13 Go to the machine on which you want to install CD One.

Step 14 Log on as superuser by entering the command su and the root password, or log in as root.

Step 15 Create a /cdrom directory, if one does not already exist, by entering:

# mkdir -p /cdrom/cw2000

Step 16 To mount the CD-ROM drive, enter:

# /usr/sbin/mount -r remote_machine_name:/cdrom/cdrom0 /cdrom/cw2000
 

Step 1 As root, enter:

# cd
# umount /cdrom/cdrom0 
# eject
 

Step 2 Remove the CD-ROM and store it in a safe place.

Step 1 As root, enter the following on the local machine:

# umount /cdrom/cw2000
 

Step 2 As root, enter the following on the remote machine:

# umount /cdrom/cdrom0
 

Step 3 Remove the CD-ROM and store it in a safe place.