|
|
CWSI Campus is a suite of network management applications that allow you to configure, monitor, and manage a switched internetwork. CWSI Campus includes the following applications:
The CWSI Campus installation automatically installs the Network Map, VlanDirector, UserTracking, and CiscoView applications. The TrafficDirector and AtmDirector applications are optional components.
This chapter includes the following information:
Table 3-1 provides a quick reference overview of how to install CWSI Campus, including references to where you can find more details about each task.
| Task | Steps | References | ||
|---|---|---|---|---|
| Step 1 Verify system requirements. | |||
Step 2 Install the browser you will be using. | ||||
Step 3 Save your SNM maps before installing CWSI Campus. | ||||
Step 4 Install the Essentials application. | ||||
Step 5 Select your seed device. | ||||
Step 6 Select the device packages you need based on the devices you plan to use. | ||||
| Step 1 Become superuser. | |||
Step 2 Mount the Essentials CD-ROM. | ||||
Step 3 Run the installation program. | ||||
Step 4 Answer any questions that result from the installation program's checks. | ||||
Step 5 Complete the installation. | "Completing the Installation" section on | |||
Step 6 Verify your community strings. | "Completing the Installation" section on | |||
| Step 1 Install additional software required by several applications in the Campus suite. | |||
| Step 1 Start Campus, and the VlanDirector, AtmDirector, UserTracking, TrafficDirector, and CiscoView applications. |
Before you install CWSI Campus, perform the following steps:
Step 1 Verify system requirements.
For complete system and network requirements, see "Before You Begin."
Step 2 Install your browser.
Install the browser that you will be using (if you have not already done so). The browser is required to view the CWSI Campus online help. Launch the browser at least once to confirm the license registration.
Step 3 Install Resource Manager Essentials.
Follow the instructions provided in "Installing Essentials."
Step 4 Determine your seed device.
See "Determining Your Seed Device" for additional information.
Step 5 Determine which CiscoView device packages to install.
When CiscoView is installed during the CWSI Campus installation, the setup program will prompt you to select the device packages (.pkg files) you need based on the devices you plan to use. Make sure you know the types of devices you plan to use and manage on your network.
During the installation, you will be prompted for a seed device. The seed device is the device from which you start the discovery process. The seed device can be any Cisco device with the Cisco Discovery Protocol (CDP) enabled (for example, a Catalyst 5000 switch) and a valid read Simple Network Management Protocol (SNMP) community string.
The seed device you select during the CWSI Campus installation determines whether the product operates correctly. Verify that the seed device meets the following requirements before installing CWSI Campus:
If you have an ATM network, you need to select a LightStream 1010 switch as the seed device for the discovery. The LightStream 1010 switch should be located near a Catalyst 5000 switch on the network. This allows the LAN Emulation (LANE) components to be properly discovered using Interim Local Management Interface (ILMI).
Table 3-2 lists the Cisco software versions which support LANE discovery.
| Device | Version |
|---|---|
LightStream 1010 switch | Cisco IOS Release 11.2(8) |
Cisco routers | Cisco IOS Release 11.2(10) |
Catalyst 5000 series switches | NMP (2.4.3)/ATM 3.2(5) |
Catalyst 3000 series switches | 2.2(2) |
To install CWSI Campus, follow these steps:
Step 1 Become superuser by entering su and the root password at the command prompt, or log in as root.
Step 2 Insert the CWSI Campus CD-ROM into the CD-ROM drive.
Step 3 If the /cdrom directory does not already exist, enter the following command to create it:
# mkdir /cdrom
The CD-ROM is automatically mounted into the /cdrom/cdrom0 directory. If you are running File Manager, a separate File Manager window displays the contents of the CD-ROM.
Step 4 Enter the following commands:
# cd /cdrom/cdrom0 #./setup.sh
Step 5 Enter y to agree to the terms of the copyright.
Step 6 When prompted, select the optional components that you want to install.
1 CSCOtd5 TrafficDirector for HP-UX (PA_RISC) 5.5 2 CSCOatmd AtmDirector for HP-UX (PA_RISC) 2.2 Select optional components you wish to install (all/none/q)? [all]:
Step 7 Enter the appropriate option and press Return.
Step 8 Enter information or press Return for the default response (in square brackets) to the following requests:
Enter product location (PKGROOT): [/opt/CSCOcwsi] Enter database location: [/opt/CSCOcwsi/db/data] Enter seed device name or IP address: Enter ANI Server name: [hostnameAniServer] Enter full netscape browser executable pathname: Enter TCP port number to use for DB: [8000]
The values you enter or confirm are displayed.
Step 9 Enter y to accept these values.
As the installation proceeds, filenames for the CWSI Campus, CiscoView, TrafficDirector, and AtmDirector applications are displayed as they are installed. Each application takes approximately 10 minutes to install, depending on your system configuration.
Step 10 You are prompted to select all of the device packages you want to install.
Step 11 Select the numbers from the list that correspond to the device packages you want to install (for example "1 2 3"). You can also enter "all" or "none." The default is all.
Step 12 You are prompted if you want the README file displayed when the installation completes. Select y or n.
Other prompts appear depending on which application you have chosen to install. Refer to the "Installing TrafficDirector and AtmDirector" section in this chapter for specific instructions about installing these applications.
The TrafficDirector and AtmDirector applications are optional components. If you choose to install the TrafficDirector and AtmDirector applications, these components are installed automatically in the /opt/CSCOcwsi directory.
To complete your installation, follow these steps:
Step 1 Remove the CD-ROM and store it in a safe place.
Step 2 The /tmp/cwsiinstall.log file contains information for the CiscoView, TrafficDirector, and AtmDirector applications. Be sure to save this file to help you troubleshoot future installation problems.
Step 3 Verify your community strings.
If the read community strings in your network are different from the default "public," you will need to edit the communities file (communities.dat) after installing and before starting CWSI Campus and discovering your network. The communities.dat file is located in the install directory\etc\cwsi directory. For more information, see the Getting Started with CWSI Campus publication.
To install TrafficDirector standalone (independent of CWSI Campus), run the setup.sh installation script located in the CSCOtd5/install.td directory on the CD-ROM.
Several of the applications in the CWSI Campus suite require additional software which can be installed after you install CWSI Campus.
A TFTP server must be set up and configured if you plan to use the VMPS feature in UserTracking. For more information about installing and configuring a TFTP server, see the "Configuring a TFTP Server for Use with VMPS" chapter in the Using the CWSI Campus UserTracking Application publication.
This section explains how to install CWSI Campus if you have a previous version installed on your machine. This process involves the following major steps:
1. (Optional) Removing previous versions of CWSI Campus.
2. Running the CWSI Campus installation program to install the new version.
Step 1 (Optional) To remove previous versions of CWSI Campus, log in as root and then enter the uninstall command:
# /opt/CSCOcwsi/bin/uninstall.sh
The default CWSI Campus install directory is /opt/CSCOcwsi. If you installed CWSI Campus and its applications in a different directory, enter that directory instead.
Step 2 Run the CWSI Campus installation program to install the new version as explained in the "Installing CWSI Campus" section.
The upgrade procedure is identical to performing a new installation.
To start CWSI Campus, enter the following command:
/opt/CSCOcwsi/bin/cwsi
Start the VlanDirector, AtmDirector, UserTracking, TrafficDirector, and CiscoView applications from the main Campus topology window.
If you have not installed a particular component (such as AtmDirector), that option is not available in the main Campus menu.
To remove CWSI Campus, you must log in as root. Enter the uninstall command as follows:
# /opt/CSCOcwsi/bin/uninstall.sh
The default CWSI Campus install directory is /opt/CSCOcwsi. If you installed CWSI Campus and its applications in a different directory, enter that directory instead.
To add new devices to CiscoView, access Cisco Connection Online (CCO). Instructions on how to download additional devices for CiscoView using the cvinstall command are available on CCO or on the anonymous ftp server in the Network Management section of the Software Center. These instructions are also included in the CiscoView Incremental Installation Quick Reference publication, which is on the Documentation CD.
To incrementally add device support from CCO, follow these steps:
Step 1 If you installed CiscoView in a directory other than /opt/CSCOcwsi, use that directory name in this procedure.
Step 2 Download the device package files from CCO into the cv_pkgs directory.
Step 3 For CCO packages, untar the package by entering the following command:
# tar -xvf tar_filename
Step 4 Set your NMSROOT environment variable, as follows:
# setenv NMSROOT /opt/CSCOcwsi
Step 5 Go to the cv_pkgs directory:
# cd /cdrom/cdrom0/cv_pkgs
Step 6 To install the package, log in as root and enter the following command:
$NMSROOT/bin/cvinstall device_name.pkg
Posted: Thu Sep 30 10:04:51 PDT 1999
Copyright 1989-1999©Cisco Systems Inc.