|
|
Error Message Database Persistent store initialization failed. Exiting...
Recommended Action Record the error and contact your system administrator.
Error Message Error while validating MIB vars for Config Server Database
Recommended Action Record the error and contact your system administrator.
Error Message SNMP Error X while fetching Config Server Database
Explanation You may have provided incorrect values for the source and destination VPI/VCI or NSAP address prefix, or the device cannot be reached through SNMP.
Recommended Action Verify the values you entered and make sure the device has an SNMP agent running and can be reached through its IP address.
Error Message Internal Error: Incorrect callback invoked
Recommended Action Record the error and contact your system administrator.
Error Message Error occurred while sending SNMP request
Explanation You may have provided incorrect values for the source and destination VPI/VCI or NSAP address prefix, or the device cannot be reached through SNMP.
Recommended Action Verify the values you entered and make sure the device has an SNMP agent running and can be reached through its IP address.
Error Message SNMP Error X while fetching ATM Addresses allowed to join ATM-VLAN
Explanation You may have provided incorrect values for the source and destination VPI/VCI or NSAP address prefix, or the device cannot be reached through SNMP.
Recommended Action Verify the values you entered and make sure the device has an SNMP agent running and can be reached through its IP address.
Error Message Error: No Device found or internal error
Recommended Action Record the error and contact your system administrator.
Error Message Error: VarBind constructed using atmdSrvcRegLecs is not valid
Recommended Action Record the error and contact your system administrator.
Error Message Error: Unable to resolve Config Server List MIB Variables
Recommended Action Record the error and contact your system administrator.
Error Message SNMP Error X while fetching Config Server List
Explanation You may have provided incorrect values for the source and destination VPI/VCI or NSAP address prefix, or the device cannot be reached through SNMP.
Recommended Action Verify the values you entered and make sure the device has an SNMP agent running and can be reached through its IP address.
Error Message Error: No Config Table Found in Config Server
Recommended Action Record the error and contact your system administrator.
Error Message Error: Unable to resolve Config Server Database MIB Variables
Recommended Action Record the error and contact your system administrator.
Error Message Error while forming SNMP Variable bindings
Recommended Action Record the error and contact your system administrator.
Error Message Error while fetching Config Server Database
Recommended Action Record the error and contact your system administrator.
Error Message Error while validating Config Server Database MIB variables
Recommended Action Record the error and contact your system administrator.
Error Message SNMP Error X while fetching Config Server Database
Explanation You may have provided incorrect values for the source and destination VPI/VCI or NSAP address prefix, or the device cannot be reached through SNMP.
Recommended Action Verify the values you entered and make sure the device has an SNMP agent running and can be reached through its IP address.
Error Message Error while validating MIB vars for LE Server Information
Recommended Action Record the error and contact your system administrator.
Error Message SNMP Error X while fetching LE Server Information
Explanation You may have provided incorrect values for the source and destination VPI/VCI or NSAP address prefix, or the device cannot be reached through SNMP.
Recommended Action Verify the values you entered and make sure the device has an SNMP agent running and can be reached through its IP address.
Error Message SNMP Error X while fetching MAC Addresses allowed to join ATM-VLAN
Explanation You may have provided incorrect values for the source and destination VPI/VCI or NSAP address prefix, or the device cannot be reached through SNMP.
Recommended Action Verify the values you entered and make sure the device has an SNMP agent running and can be reached through its IP address.
Error Message Error while validating MIB vars for Client Status Information
Recommended Action Record the error and contact your system administrator.
Error Message Error X while fetching Client Status parameters
Recommended Action Record the error and contact your system administrator.
Error Message Error while validating MIB vars for LE Server Status Information
Recommended Action Record the error and contact your system administrator.
Error Message SNMP Error X while fetching LE Server Status Information
Explanation You may have provided incorrect values for the source and destination VPI/VCI or NSAP address prefix, or the device cannot be reached through SNMP.
Recommended Action Verify the values you entered and make sure the device has an SNMP agent running and can be reached through its IP address.
Error Message Error while fetching LE Server Status Parameters
Recommended Action Record the error and contact your system administrator.
Error Message Error: Unable to resolve Broadcast Server VC MIB Variables
Recommended Action Record the error and contact your system administrator.
Error Message Error while fetching Broadcast Server Control VCs
Recommended Action Record the error and contact your system administrator.
Error Message Error while validating MIB vars for Broadcast Server VCs
Recommended Action Record the error and contact your system administrator.
Error Message SNMP Error X while fetching Broadcast server Control VCs
Explanation You may have provided incorrect values for the source and destination VPI/VCI or NSAP address prefix, or the device cannot be reached through SNMP.
Recommended Action Verify the values you entered and make sure the device has an SNMP agent running and can be reached through its IP address.
Error Message Error: Unable to resolve Config Server VC MIB Variables
Recommended Action Record the error and contact your system administrator.
Error Message SNMP Error X while fetching Config Server Control VCs
Explanation You may have provided incorrect values for the source and destination VPI/VCI or NSAP address prefix, or the device cannot be reached through SNMP.
Recommended Action Verify the values you entered and make sure the device has an SNMP agent running and can be reached through its IP address.
Error Message Error: Unable to resolve Client VC MIB Variables
Recommended Action Record the error and contact your system administrator.
Error Message SNMP Error X while fetching Client VCs
Explanation You may have provided incorrect values for the source and destination VPI/VCI or NSAP address prefix, or the device cannot be reached through SNMP.
Recommended Action Verify the values you entered and make sure the device has an SNMP agent running and can be reached through its IP address.
Error Message Error: Unable to resolve Client Data VC MIB Variables
Recommended Action Record the error and contact your system administrator.
Error Message Error: Unable to resolve LE Server VC MIB Variables
Recommended Action Record the error and contact your system administrator.
Error Message Error while validating MIB vars for LE Server VCs
Recommended Action Record the error and contact your system administrator.
Error Message SNMP Error X while fetching LE Server Control VCs
Explanation You may have provided incorrect values for the source and destination VPI/VCI or NSAP address prefix, or the device cannot be reached through SNMP.
Recommended Action Verify the values you entered and make sure the device has an SNMP agent running and can be reached through its IP address.
Error Message Error while forming Client Summary var bind list
Recommended Action Record the error and contact your system administrator.
Error Message SNMP Error X while fetching Client Summary Information
Explanation You may have provided incorrect values for the source and destination VPI/VCI or NSAP address prefix, or the device cannot be reached through SNMP.
Recommended Action Verify the values you entered and make sure the device has an SNMP agent running and can be reached through its IP address.
Error Message Error while forming Config Server var bind list
Recommended Action Record the error and contact your system administrator.
Error Message SNMP Error X while fetching Config Server Information
Explanation You may have provided incorrect values for the source and destination VPI/VCI or NSAP address prefix, or the device cannot be reached through SNMP.
Recommended Action Verify the values you entered and make sure the device has an SNMP agent running and can be reached through its IP address.
Error Message Error while retrieving Config Server information
Recommended Action Record the error and contact your system administrator.
Error Message Internal Error: No LE Server found
Recommended Action Record the error and contact your system administrator.
Error Message Error while forming LE Server Var Bind list
Recommended Action Record the error and contact your system administrator.
Error Message SNMP Error X while fetching LE Server Information
Explanation You may have provided incorrect values for the source and destination VPI/VCI or NSAP address prefix, or the device cannot be reached through SNMP.
Recommended Action Verify the values you entered and make sure the device has an SNMP agent running and can be reached through its IP address.
Error Message Error: No LE Server found on selected node
Recommended Action Select a node that contains an LE server and repeat the command.
Error Message Error: No Broadcast Server found on selected node
Recommended Action Select a node that contains a broadcast server and repeat the command.
Error Message Error: No Config. server found on selected node
Recommended Action Select a node that contains a configuration server and repeat the command.
Error Message Error: No Client found on selected node
Recommended Action Select a node that contains a client and repeat the command.
Error Message Internal Error occurred while displaying LE/Broadcast Server Summary
Recommended Action Record the error and contact your system administrator.
Error Message Internal Error occurred while displaying Control Connections
Recommended Action Record the error and contact your system administrator.
Error Message Error: No Master LE Server in ATM-VLAN
Recommended Action Record the error and contact your system administrator.
Error Message Internal Error occurred while displaying Data Connections
Recommended Action Record the error and contact your system administrator.
Error Message Internal Error occurred while displaying Client ARP Information
Recommended Action Record the error and contact your system administrator.
Error Message Internal Error occurred while displaying Client Status Information
Recommended Action Record the error and contact your system administrator.
Error Message Internal Error occurred while displaying LE Server Status Information
Recommended Action Record the error and contact your system administrator.
Error Message Internal Error occurred while displaying Broadcast Server Performance
Recommended Action Record the error and contact your system administrator.
Error Message Internal Error occurred while displaying Client Performance
Recommended Action Record the error and contact your system administrator.
Error Message Internal Error occurred while initializing performance objects
Recommended Action Record the error and contact your system administrator.
Error Message Internal Error: No connecting device found
Recommended Action Record the error and contact your system administrator.
Error Message Error: No Config Server found or internal error
Recommended Action Record the error and contact your system administrator.
Error Message Error: No Client found or internal error
Recommended Action Record the error and contact your system administrator.
Error Message Please select a row for Trace Report
Recommended Action Select a table row and repeat the command.
Error Message Internal Error: Unable to find link
Recommended Action Record the error and contact your system administrator.
Error Message Internal Error while displaying information
Recommended Action Record the error and contact your system administrator.
Error Message Please select one object for description
Recommended Action Select only one object and repeat the command.
Error Message Please select a row in order to view details
Recommended Action Select a table row and repeat the command.
Error Message Error: Unable to get Config Server Info
Recommended Action Record the error and contact your system administrator.
Error Message Error: No ATM-VLAN in the selected row
Recommended Action Select a row that contains an ATM VLAN and repeat the command.
Error Message Error: No LE/Broadcast Server found or internal error
Recommended Action Record the error and contact your system administrator.
Error Message No Elans in the DB.
Recommended Action Define an ELAN.
Error Message Error: No ATM-VLAN Selected
Recommended Action Select an ATM VLAN and repeat the command.
Error Message Cannot enable data collection on X, which has Y MBs. At least 32MBs are required.
Recommended Action Choose a device with at least 32 megabytes of memory to do data collection.
Error Message Data collection is not enabled on X, enable it?
Recommended Action Click OK to enable data collection.
Error Message Data collection is already enabled on X!
Recommended Action You do not need to take any action to enable data collection on that device.
Error Message AtmDirector couldn't enable data collection on X.
Recommended Action Check the specified device, or contact your system administrator.
Error Message Data collection is enabled on some device(s) which is no longer needed by AtmDirector. Disable?
Recommended Action For better performance, click OK to stop collecting unneeded data.
Error Message Prefix Address Wrong Format, Please correct
Recommended Action Correct the format of the prefix address and repeat the command.
Error Message Nothing is Selected and You can't update this row
Recommended Action Choose another row and repeat the command.
Error Message Failed Add row X to device X
Recommended Action Record the error and contact your system administrator.
Error Message Added Row X to device
Recommended Action This is an informational message. No action is required.
Error Message Deleted Row X to device
Recommended Action This is an informational message. No action is required.
Error Message The Row already Exists or It is a Deleted Row, You can't add the same row
Recommended Action Choose another row to add and repeat the command.
Error Message Address Summary: Add
Recommended Action This is an informational message; no action is required.
Error Message Address Summary: Modify
Recommended Action This is an informational message; no action is required.
Error Message Address Summary: X
Recommended Action This is an informational message; no action is required.
Error Message Reachable Addresses: X
Recommended Action This is an informational message; no action is required.
Error Message Node Configuration and Information: X
Recommended Action This is an informational message; no action is required.
Error Message Link Information: X
Recommended Action This is an informational message; no action is required.
Error Message Please select two Nodes to get Neighbor Peer Window
Recommended Action You selected less than two nodes. Select two nodes and repeat the command.
Error Message Please select ONLY two Nodes to get Neighbor Peer Window.
Recommended Action You selected more than two nodes. Select two nodes and repeat the command.
Error Message Neighbor Peer: X - Y
Recommended Action This is an informational message; no action is required.
Error Message Interface Tuning: X
Recommended Action This is an informational message; no action is required.
Error Message Scope Mapping: X
Recommended Action This is an informational message; no action is required.
Error Message Nothing is selected
Recommended Action Select a row.
Error Message AduPnniInterfaceTuningAdd: Internal Error
Recommended Action Record the error and contact your system administrator.
Error Message Wrong Format for CBR
Recommended Action Correct the format and repeat the command.
Error Message Wrong Format for rtVBR
Recommended Action Correct the format and repeat the command.
Error Message Wrong Format for nrtVBR
Recommended Action Correct the format and repeat the command.
Error Message Wrong Format for ABR
Recommended Action Correct the format and repeat the command.
Error Message Wrong Format for UBR
Recommended Action Correct the format and repeat the command.
Error Message Internal Error: Unable to narrow down to ATM Device
Recommended Action Record the error and contact your system administrator.
Error Message Failed Modify Interface X to device.
Recommended Action Record the error and contact your system administrator.
Error Message Modified Interface X to device
Recommended Action This is an informational message; no action is required.
Error Message The Row already Exists or It is a Deleted Row, You can't add
Recommended Action Choose a different row to add and repeat the command.
Error Message AduPnniInterfaceTuningInteractor: Internal Error: Something wrong in the Add Window
Recommended Action Record the error and contact your system administrator.
Error Message Interface Tuning: Add
Recommended Action This is an informational message; no action is required.
Error Message Interface Tuning: Modify
Recommended Action This is an informational message; no action is required.
Error Message node info
Recommended Action This is an informational message; no action is required.
Error Message Set to Agent Successful
Recommended Action This is an informational message; no action is required.
Error Message Failed to Set to Agent
Recommended Action Record the error and contact your system administrator.
Error Message not implemented yet
Recommended Action This feature is not currently implemented; no action is required.
Error Message Error: PNNI level Wrong Value
Recommended Action Enter an appropriate value for the PNNI level and repeat the command.
Error Message No Change in data, so nothing set to agent
Recommended Action This is an informational message; no action is required.
Error Message Data is modified and Setting to Agent...
Recommended Action This is an informational message; no action is required.
Error Message PTSE Refresh Interval Wrong Value. Should be in range (30 - 1800).
Recommended Action Enter a value within the required range and repeat the command.
Error Message PTSE Life Time Factor Wrong Value. Should be in range (101-1000).
Recommended Action Enter a value within the required range and repeat the command.
Error Message PTSE Hold-down Wrong Value. Should be in range (1-100).
Recommended Action Enter a value within the required range and repeat the command.
Error Message Hello Interval Wrong Value. Should be in range (1-300).
Recommended Action Enter a value within the required range and repeat the command.
Error Message Hello Inactivity Factor Wrong Value. Should be in range (1-50).
Recommended Action Enter a value within the required range and repeat the command.
Error Message Hello Hold-down Wrong Value. Should be in range (1-100).
Recommended Action Enter a value within the required range and repeat the command.
Error Message Proportional Multiplier for AVCR Parameter Wrong Value. Should be in range (1-99).
Recommended Action Enter a value within the required range and repeat the command.
Error Message CDV Multiplication Factor Wrong Value. Should be in range (1-99).
Recommended Action Enter a value within the required range and repeat the command.
Error Message CDT Multiplication Factor Wrong Value. Should be in range (1-99).
Recommended Action Enter a value within the required range and repeat the command.
Error Message Tx Interval Wrong Value. Should be in range (5-60).
Recommended Action Enter a value within the required range and repeat the command.
Error Message Peer Delay Wrong Value. Should be in range (10-100).
Recommended Action Enter a value within the required range and repeat the command.
Error Message Minimum Threshold for ACVR Parameter Wrong Value. Should be in range (1-99).
Recommended Action Enter a value within the required range and repeat the command.
Error Message Value Out of range for entry with UNI Level X.
Recommended Action Enter a value within the required range and repeat the command.
Error Message Internal Error
Recommended Action Record the error and contact your system administrator.
Error Message Internal Error: Something wrong in the Add Window
Recommended Action Record the error and contact your system administrator.
Error Message Internal Error: Enum Conversion Problem
Recommended Action Record the error and contact your system administrator.
Error Message All Nodes
Recommended Action This is an informational message; no action is required.
Error Message All the Modifications will be lost. You can Apply before selecting another advertising node. Do you want to continue?
Recommended Action Click OK if you really want to select a new advertising node and cancel all the changes you made.
Error Message Discard All Modifications?
Recommended Action Click OK to cancel all the changes you made.
Error Message Do you want to delete the selected row?
Recommended Action Verify that you want to delete the table row and click OK.
Error Message Failed to Add row X to device Y
Recommended Action Record the error and contact your system administrator.
Error Message Failed to setup Scope Mapping X
Recommended Action Record the error and contact your system administrator.
Error Message Message
Recommended Action This is an informational message; no action is required.
Error Message Nothing is Selected and You can't update this row
Recommended Action Select an appropriate row and repeat the command.
Error Message Nothing is Selected, Do you want to Continue?
Recommended Action Click OK to continue without making a selection.
Error Message Please Select the row to be applied
Recommended Action Selected the desired table row and repeat the command.
Error Message Please Select the row to be deleted
Recommended Action Selected the desired table row and repeat the command.
Error Message Please Select the row to be modified
Recommended Action Selected the desired table row and repeat the command.
Error Message Please Select the row
Recommended Action Selected the desired table row and repeat the command.
Error Message PNNI Scope Wrong Value
Recommended Action Enter an appropriate value for the PNNI scope and repeat the command.
Error Message Reachable Address: Add
Recommended Action This is an informational message; no action is required.
Error Message Reachable Address: Modify
Recommended Action This is an informational message; no action is required.
Error Message This operation will require to set admin status down, resulting all PNNI information to be RESET. Do you want to continue?
Recommended Action If you want to continue, and lose all PNNI information, click OK.
Error Message Updated Scope Mapping Successfully
Recommended Action This is an informational message; no action is required.
Error Message Values not in decreasing order.
Recommended Action Reorder the values and repeat the command.
Error Message Warning...
Recommended Action This action may result in lost configuration data or network traffic.
Error Message When AutoSummary is enabled on the node X, you cannot modify this entry
Recommended Action Disable AutoSummary on the PNNI node, and then modify the entry. New entries are usually added instead of modifying existing entries.
Error Message Failed to delete row X to device Y
Recommended Action Check the accuracy of the SNMP write community or the ANI connection.
Error Message Internal Error: Related ILV files
Recommended Action Installation copies the GUI resource files. This error message implies that the installation was not complete. Reinstall or contact your system administrator.
Error Message Invalid selection for Route Optimization
Recommended Action In the Interface Tuning dialog box, select the proper value for Route Optimization.
Error Message Internal Error: Something is wrong in the Modify window
Recommended Action Correct any invalid entries.
Error Message Set to Agent failed
Recommended Action Check the SNMP write community.
Error Message Reachable address format wrong
Recommended Action Correct the Reachable Address format. You must use the hex addresses format, and the hex numbers must be even (for example, 00DD01).
Error Message Invalid interface, please select proper interface
Recommended Action Select another interface.
Error Message Address Type wrong
Recommended Action Implies the GUI resource file is wrong or the installation is not proper. Reinstall or contact your system administrator.
Error Message Please select All Nodes option for X Advertising Node before adding a new row
Recommended Action If you are viewing only part of the table, you cannot add a new entry. You must select the All Nodes option for the Advertising Node field.
Error Message Internal Error: Nothing selected for scope mode
Recommended Action Implies GUI resource file is wrong, or the installation is not proper. Reinstall or contact your system administrator.
Error Message The Scoping Mode should be Manual to change the Scoping Values
Recommended Action Change the Scoping mode to Manual.
Error Message Please select a node for CiscoView
Recommended Action Select a node for CiscoView.
Error Message Please select one object for describe
Recommended Action Select one object for describe.
Error Message Link Describe is not supported on this window. It can be invoked from the ILMI map
Recommended Action Invoke Link Describe from the ILMI map.
Error Message No Matching VCs found
Recommended Action No virtual channels were found that matched your criteria. Change the criteria and repeat the command.
Error Message All the Destination ATM Address are wrong
Recommended Action Change the addresses to specify active ATM devices and repeat the command.
Error Message No End Node Set yet
Recommended Action You must define an end node before proceeding.
Error Message SNMP Error While retrieving data
Explanation You may have provided incorrect values for the source and destination VPI/VCI or NSAP address prefix, or the device cannot be reached through SNMP.
Recommended Action Verify the values you entered and make sure the device has an SNMP agent running and can be reached through its IP address.
Error Message SNMP Error Device Unreachable
Explanation You may have provided incorrect values for the source and destination VPI/VCI or NSAP address prefix, or the device cannot be reached through SNMP.
Recommended Action Verify the values you entered and make sure the device has an SNMP agent running and can be reached through its IP address.
Error Message SNMP Error Device is busy
Recommended Action Wait a few minutes and try the operation again.
Error Message SNMP Error Invalid Data
Recommended Action Record the error and contact your system administrator.
Error Message Unable to initialize CORBA. ORB Services will not be available.
Recommended Action Record the error and contact your system administrator.
Error Message Warning: AtmDirector is unable to connect with ANI Server. Please close AtmDirector, ensure ANI is running, and restart it.
Recommended Action Follow the directions. Contact your system administrator if the problem persists.
Error Message Warning: AtmDirector is unable to connect with ANI Event Channel. Please close AtmDirector, ensure ANI is running and restart it.
Recommended Action Follow the directions. Contact your system administrator if the problem persists.
Error Message Warning: Initial Discovery is in progress. Please restart AtmDirector after ANI completes initial network discovery.
Recommended Action Follow the directions. Contact your system administrator if the problem persists.
Error Message Warning: ANI has just completed Initial Discovery. It is recommended to restart AtmDirector.
Recommended Action Follow the directions. Contact your system administrator if the problem persists.
Error Message Warning: AtmDirector has lost connection to ANI Event Channel. Please close AtmDirector, ensure ANI is running and restart it
Recommended Action Follow the directions. Contact your system administrator if the problem persists.
Error Message Warning: ANI Event Channel has been reset. Please close AtmDirector, ensure ANI is running and restart it.
Recommended Action Follow the directions. Contact your system administrator if the problem persists.
Error Message Successfully connected with Event Channel X.
Recommended Action This is an informational message; no action is required.
Error Message Unable to bind with Event Channel X.
Recommended Action Record the error and contact your system administrator.
Error Message Reconnected with EventChannel X.
Recommended Action This is an informational message; no action is required.
Error Message Lost Connection with EventChannel X.
Recommended Action Record the error and contact your system administrator.
Error Message Received event from event channel.
Recommended Action This is an informational message; no action is required.
Error Message End of batch of events. Begin Processing DB events.
Recommended Action This is an informational message; no action is required.
Error Message Database is ready to be loaded. Reason X.
Recommended Action This is an informational message; no action is required.
Error Message Database needs to be reloaded. Reason X.
Recommended Action Record the error and contact your system administrator.
Error Message Successfully connected with RealTime Poll Service.
Recommended Action This is an informational message; no action is required.
Error Message Unable to bind with RealTime Poll Service.
Recommended Action Record the error and contact your system administrator.
Error Message Lost Connection with RealTime Poll Service.
Recommended Action Record the error and contact your system administrator.
Error Message One or more arguments to X Function is not valid.
Recommended Action Check the values you entered for validity and repeat the command.
Error Message Requested Function X not supported by RealTime Poll Service.
Recommended Action Record the error and contact your system administrator.
Error Message RealTime Service returned an error while executing function X.
Recommended Action Record the error and contact your system administrator.
Error Message RealTime Service aborted X function. Reason Y
Recommended Action Record the error and contact your system administrator.
Error Message Please select Transmit and Receive Traffic Parameters.
Recommended Action Select the appropriate parameters and repeat the command.
Error Message Invalid value for Source VPI.
Recommended Action Enter an appropriate value for this parameter and repeat the command.
Error Message Invalid value for Source VCI.
Recommended Action Enter an appropriate value for this parameter and repeat the command.
Error Message Invalid value for Destination VPI.
Recommended Action Enter an appropriate value for this parameter and repeat the command.
Error Message Invalid value for Destination VCI.
Recommended Action Enter an appropriate value for this parameter and repeat the command.
Error Message SPVC Setup Successful.
Recommended Action This is an informational message; no action is required.
Error Message SPVC Setup Failed.
Recommended Action Record the error and contact your system administrator.
Error Message SPVP Setup Successful.
Recommended Action This is an informational message; no action is required.
Error Message SPVP Setup Failed.
Recommended Action Record the error and contact your system administrator.
Error Message Are you sure you want to delete the selected SPVC?
Recommended Action Click OK to delete the SPVC.
Error Message PVC Operational Status is Active.
Recommended Action This is an informational message; no action is required.
Error Message PVC Operations Status still down.
Recommended Action This is an informational message; no action is required.
Error Message PVC Operational Status is Unknown.
Recommended Action This is an informational message; no action is required.
Error Message Something Wrong, Close this window and start again.
Recommended Action Close the AtmDirector application and start it again.
Error Message Destination Address Wrong Format.
Recommended Action Reenter the address in the proper format and repeat the command.
Error Message OAM Ping Successful.
Recommended Action This is an informational message; no action is required.
Error Message Failed to Setup OAM Ping.
Recommended Action Record the error and contact your system administrator.
Error Message Unable to Poll the OAM Ping Data.
Recommended Action Record the error and contact your system administrator.
Error Message Please select a row for Delete.
Recommended Action You did not select a table row to delete. Select a row and repeat the command.
Error Message Error in getting VPI/VCI values.
Recommended Action Record the error and contact your system administrator.
Error Message Wrong Format for VPI value.
Recommended Action Enter a value in the proper format and repeat the command.
Error Message Wrong Format for VPI/VCI value.
Recommended Action Enter a value in the proper format and repeat the command.
Error Message Wrong Format for timeout value.
Recommended Action Enter a value in the proper format and repeat the command.
Error Message Wrong Format for delay value.
Recommended Action Enter a value in the proper format and repeat the command.
Error Message Wrong Format for cells value.
Recommended Action Enter a value in the proper format and repeat the command.
Error Message Wrong Format for Destination Type.
Recommended Action Enter a value in the proper format and repeat the command.
Error Message Please select a row for Delete.
Recommended Action You did not select a row. Select a row in the table and repeat the command.
Error Message Please select a row for Plotting Utilization
Recommended Action You did not select a row. Select a row in the table and repeat the command.
Error Message Retrieving data from the Network...
Recommended Action This is an informational message; no action is required.
Error Message Updating the link utilization data...
Recommended Action This is an informational message; no action is required.
Error Message Please select a row for Trace Report.
Recommended Action You did not select a row. Select a row in the table and repeat the command.
Error Message Please select a link to get VC List.
Recommended Action You have not selected any links. Select a link and repeat the command.
Error Message Please select ONLY one link to get VC List.
Recommended Action You have selected more than one link. Select only one link and repeat the command.
Posted: Thu Sep 30 11:34:37 PDT 1999
Copyright 1989-1999©Cisco Systems Inc.