|
|
You can use the Modem Registrar user interface to define and configure option sets for cable modems manufactured by specific vendors as described in this chapter. Typically, the default option set contains most of the DOCSIS options that apply to a cable modem. The vendor option sets contain those options that apply specifically to a vendor's cable modem. Modem Registrar does not require that you create vendor options sets and does not require you to define DOCSIS options for the option sets. You can choose to create vendor option sets that do not contain any options.
Figure 10-1 shows the hierarchy of the user interface pages used to configure vendor option sets.
You can use the Configure Option Sets page (Figure 10-2) to select the option set(s) you want to configure.
To configure vendor option sets, click Vendor on the Configure Option Sets page. The Vendor Option Set List page appears.
You can use the Vendor Option Set List page (see Figure 10-3) to list vendor option sets currently defined.
To list the vendor option sets currently defined, do the following:
Step 1 Log in to Modem Registrar.
Step 2 On the Main Menu page, click Option Sets.
Step 3 On the Configure Option Sets page, click Vendor. The Vendor Option Set List page appears, listing all of the vendor option sets currently defined.
You can use the Vendor Option Set List page (see Figure 10-3) to access the user interface pages used to do the following:
You can use the Add Vendor Option Set page (see Figure 10-4) to define a new option set for a specific vendor.
To add a vendor option set, do the following:
Step 1 Log in to Modem Registrar.
Step 2 On the Main Menu page, click Option Sets.
Step 3 On the Configure Option Sets page, click Vendor.
Step 4 On the Vendor Option Set List page, click Add Option Set.
Step 5 On the Add Vendor Option Set page, enter the name of the new vendor option set in the Vendor Option Set Name field. This name must be unique.
For example: cisco A
Step 6 Enter a description of the vendor option set in the Description field to further identify it. This field is optional. You can choose to leave this field blank.
Step 7 Click OK to add the new option set.
If the vendor option set name you entered is unique, the new option set is added. The Vendor Option Set List page appears.
If the option set name is not unique, a message appears asking you to enter another option set name.
Step 8 To assign options to the new vendor option set, see the "Adding Vendor Options" section.
You can use the Clone Vendor Option Set page (see Figure 10-5) to create a new vendor option set using the settings of an existing vendor option set.
To clone a vendor option set, do the following:
Step 1 Log in to Modem Registrar.
Step 2 On the Main Menu page, click Option Sets.
Step 3 On the Configure Option Sets page, click Vendor.
Step 4 On the Vendor Option Set List page, click Clone Option Set.
Step 5 On the Clone Vendor Option Set page, select the vendor option set that you want to copy from the Clone from Option Set pull-down list. This list contains the names of all of the vendor option sets currently defined.
Step 6 Enter the name of the vendor option set you are creating in the Clone to Option Set field. This name must be unique.
Step 7 Enter the description for the new vendor option set in the Description field to further identify it. This field is optional. You can choose to leave this field blank.
Step 8 Click OK to add the new option set.
If the vendor option set name you entered and all of the information in the other fields are valid, the new vendor option set is added and the Vendor Option Set List page appears.
If any of the information is invalid, a message appears asking you to correct the invalid information.
Step 9 To modify the cloned option set, see "Modifying Vendor Option Sets" section.
You can use the Edit Vendor Option Set page (see Figure 10-6) to do the following:
To modify a vendor option set, do the following:
Step 1 Log in to Modem Registrar.
Step 2 On the Main Menu page, click Option Sets.
Step 3 On the Configure Option Sets page, click Vendor.
Step 4 On the Vendor Option Set List page, locate the vendor option set you want to modify in the list of option sets and click its hypertext link.
Step 5 On the Edit Vendor Option Set page, modify the option set as desired by doing the following:
Step 6 Click OK to save the changes you made to the fields on this page. The Vendor Option Set List page appears.
Step 7 To modify the options assigned to this vendor option set, see the "Modifying Vendor Options" section.
You can use the Edit Vendor Option Set page (see Figure 10-6) to remove a vendor option set.
To remove a vendor option set, do the following:
Step 1 Log in to Modem Registrar.
Step 2 On the Main Menu page, click Option Sets.
Step 3 On the Configure Option Sets page, click Vendor.
Step 4 On the Vendor Option Set List page, locate the vendor option set you want to remove in the list of option sets and click its hypertext link.
Step 5 On the Edit Vendor Option Set page, check the name of the vendor option set displayed just below the Navigation Bar and verify that you selected the correct option set.
Step 6 Click Delete Option Set to remove the option set. A confirmation message appears asking you if you want to remove the option set. Click Yes or No as appropriate.
You can use the List Vendor Options page (see Figure 10-7) to list all of the options currently defined in a vendor option set for all service types and levels.
To list all of the vendor options in an option set, do the following:
Step 1 Log in to Modem Registrar.
Step 2 On the Main Menu page, click Option Sets.
Step 3 On the Configure Option Sets page, click Vendor.
Step 4 On the Vendor Option Set List page, locate the option set containing the options you want to list and click its hypertext link.
Step 5 On the Edit Vendor Option Set page, click List All Options. The List Vendor Options page appears, listing all of the currently defined options.
Step 6 After you are finished viewing the vendor options, click OK. The Edit Vendor Option Set page appears.
You can use the Edit Vendor Options page (see Figure 10-8) to do the following:
Refer to the following information when using the Edit Vendor Options page. For more information, see the online Help page.
You can use the Edit Vendor Options page (see Figure 10-8) to define options for a vendor option set.
To add a vendor option, do the following:
Step 1 Log in to Modem Registrar.
Step 2 On the Main Menu page, click Option Sets.
Step 3 On the Configure Option Sets page, click Vendor.
Step 4 On the Vendor Option Set List page, locate the vendor option set to which you want to add an option and click its hypertext link.
Step 5 On the Edit Vendor Option Set page, do one of the following:
Step 6 On the Edit Vendor Options page, select a discrete option number from the Add Option pull-down list and click Add Option. The Edit Vendor Options page redisplays with the new option listed.
Step 7 In the Value field for the new option, enter the value you want to assign to the option. You must specify a value for simple options. For compound options, you must specify a value for at least one of the suboptions, but you can choose to leave some of them blank.
Step 8 Click OK to save the new option.
If the information in all of the fields is valid, the Edit Vendor Options page redisplays with the new option added.
If any of the information is invalid, a message appears asking you to correct the invalid information.
You can use the Edit Vendor Options page (see Figure 10-8) to clone a multi-instance compound option. Cloning an option copies and adds an exact copy of a compound option, and all of its suboptions to the vendor option set. You can clone only multi-instance compound options. For more information, see the "Single-Instance and Multi-Instance Options" section.
To clone a multi-instance compound option, do the following:
Step 1 Log in to Modem Registrar.
Step 2 On the Main Menu page, click Option Sets.
Step 3 On the Configure Option Sets page, click Vendor.
Step 4 On the Vendor Option Set List page, locate the vendor option set to which you want to clone an option and click its hypertext link.
Step 5 On the Edit Vendor Option Set page, do one of the following:
Step 6 On the Edit Vendor Options page, locate the compound option you want to clone and click Clone for that option. The Edit Vendor Options page redisplays, and the newly cloned option and all of its suboptions appear in the list of options.
Step 7 Click OK to save the cloned option and its suboptions.
If the information in all of the fields is valid, the Edit Vendor Option Set page appears.
If any of the information is invalid, a message appears asking you to correct the invalid information.
Step 8 To modify the cloned option, see the "Modifying Vendor Options" section.
You can use the Edit Vendor Options page (see Figure 10-8) to modify an option in a vendor option set.
To modify a vendor option, do the following:
Step 1 Log in to Modem Registrar.
Step 2 On the Main Menu page, click Option Sets.
Step 3 On the Configure Option Sets page, click Vendor.
Step 4 On the Vendor Option Set List page, locate the name of the vendor option set containing the option you want to modify and click its hypertext link.
Step 5 On the Edit Vendor Option Set page, do one of the following:
Step 6 On the Edit Vendor Options page, locate the option number you want to modify and do the following:
Step 7 Click OK to save the changes you made to the fields on this page.
If the information in all of the fields is valid, the Edit Vendor Options page redisplays with the changes visible.
If any of the information is invalid, a message appears asking you to correct the invalid information.
You can use the Edit Vendor Options page (see Figure 10-8) to remove an option from a vendor option set.
To remove a vendor option, do the following:
Step 1 Log in to Modem Registrar.
Step 2 On the Main Menu page, click Option Sets.
Step 3 On the Configure Option Sets page, click Vendor.
Step 4 On the Vendor Option Set List page, locate the name of the vendor option set containing the vendor option you want to remove and click its hypertext link.
Step 5 On the Edit Vendor Option Set page, do one of the following:
Step 6 On the Edit Vendor Options page, locate the option you want to remove and click Delete for that option. A confirmation message appears asking you if you want to remove the option. Click Yes or No as appropriate.
Click Yes to remove the option. If it is a compound option, all of its suboptions are also removed.
Click No to leave the option unchanged.
Posted: Mon Jan 17 08:00:28 PST 2000
Copyright 1989 - 2000©Cisco Systems Inc.
or that option.