|
|
This chapter describes how to access inventory details about the Cisco 6015 DSLAM chassis and each of the cards within the chassis. You can retrieve inventory information within the Map Viewer window by right-clicking either the chassis object or any card, such as an NI-2 card or a DMT line card.
This chapter includes the following sections:
To view the Chassis Inventory window, complete the following steps:
Step 2 Choose Cisco DSL Manager > Physical > Chassis > Inventory.
The Chassis Inventory window opens, which is shown in Figure 9-1.
Step 3 Select a chassis from the list on the left (the first chassis object is selected by default.)
 |
Note The General and Asset Tracking tabs are read-only. |
The General tab contains the following five areas:
The fields on this tab are described in Table 9-1.
| Field | Description |
|---|---|
Chassis ID | Displays the ID of the selected chassis. |
Number of Slots | Not applicable for this release of CDM. |
Backplane Type | Not applicable for this release of CDM. |
Type | Displays the chassis type. |
Environmental Monitor Type | Not applicable this release of CDM. |
Host Name | Displays the host name for the selected chassis. |
Boot Image Host | Displays the IP address of the host, which supplies the software currently running. |
Description | Displays the system hardware type, software operating system, and networking software of the selected chassis. |
ROM ID | Displays the system boot trap description and version identifier. |
Domain Name | Not applicable for this release of CDM. |
Services | Displays the set of services potentially offered by the selected chassis. |
IOS | Displays the version of the Cisco IOS commands in the selected chassis. |
Software | Not applicable for this release of CDM. |
Hardware | Displays the version of the selected chassis. |
Firmware | Not applicable for this release of CDM. |
PCMCIA Slot Details | The PCMCIA Details area is not applicable for CDM. |
Power Supply Details | The Power Supply Details area is not applicable for CDM. |
The Chassis Inventory Window Asset Tracking tab, which is shown in Figure 9-2, displays information about the hardware.
The fields on this tab are described in Table 9-2.
| Field | Description |
|---|---|
Assembly Version | Displays the number assigned by the manufacturer that uniquely identifies the component. |
Assembly Number | Displays the manufacturing assembly number, which is the hardware identification. |
Software ID | Not applicable for this release of CDM. |
Firmware ID | Not applicable for this release of CDM. |
Common Language Equipment ID | Not applicable for this release of CDM. |
Orderable Part Number | Represents the number used to reorder this component (part number). |
Original Equipment Manufacturer | Displays the original equipment manufacturer of the chassis. |
To view the Module Inventory window, complete the following steps:
Step 2 Choose Cisco DSL Manager > Physical > Module > Inventory.
The Module Inventory window opens, which is shown in Figure 9-3.
Step 3 From the list boxes on the left, select the relevant chassis and card.
The status information for the selected card appears on the right.
|
Note The General and Asset Tracking tabs are read-only. |
The General tab contains four areas:
The fields on this tab are described in Table 9-3.
| Field | Description |
|---|---|
Type | Displays the type of selected card. |
Description | Displays a description of the selected card. |
Serial Number | Displays the serial number for the selected card. |
Host Name | Displays the host name for the selected card. |
Boot Image Host | Displays the IP address of the host, which supplies the software currently running. |
Description | Displays the system hardware type, software operating system, and networking software of the selected card. |
ROM ID | Displays the system boot trap description and version identifier. |
Domain Name | Displays the domain portion of the domain name for the host. (Field not applicable for CDM.) |
Services | Displays the services available for the selected card. |
IOS | Displays the version of the Cisco IOS commands in the selected card. |
Software | Displays the software version installed in the card. No information appears if data is not available. |
Hardware | Displays the version of the selected card. |
Firmware | Displays the revision of firmware installed on the card. |
Slot Number | Displays the current slot number location of the selected card within the chassis. |
Max. Supported Ports | Displays the maximum number of ports supported by the selected card. |
Sub Slot Number | Displays the sub slot number of the selected card. (Field not applicable for CDM.) |
Number of Working Ports | Displays the number of currently operational ports on the selected card. (Field not applicable for CDM.) |
The Asset Tracking tab, which is shown in Figure 9-4, contains one area, Asset Tracking.
The fields on this area are described in Table 9-4.
| Field | Description |
|---|---|
Assembly Version | Displays the number assigned by the manufacturer that uniquely identifies the component. |
Assembly Number | Displays the manufacturing assembly number, which is the hardware identification. |
Software ID | Displays the software installed on this card. The value to be entered must be a string. |
Firmware ID | Displays the revision of firmware installed on this card. |
Common Language Equipment ID | Represents the CLEI code for the card. |
Orderable Part Number | Represents the number used to reorder this component (part number). |
Original Equipment Manufacturer | Displays the original equipment manufacturer of the card. |
Posted: Tue Sep 5 09:22:47 PDT 2000
Copyright 1989-2000©Cisco Systems Inc.