Index

index

A

: air flow system 2-13

B

band splitter module. See BSM

BSM

: connecting MUX and a DMX to 4-8
: connecting remote lines to 4-11
: connecting RSM to 4-10
: description 2-3, 2-17, 7-1
: installation 7-2
: optical connectors 7-1
: specifications 9-23

C

cable testing 3-2

channel card labeling descriptions 2-12

chassis

: description 2-10
: dimensions (figure) 2-11
: parts 2-13

: rear view (figure) 2-9
: specification 9-4

configuration

: extension chassis configuration options 9-2
: primary chassis configuration options 9-2
: typical configuration (figure) 2-5
: unit 9-1

conventions of the guide xv

D

DEMI

: description 2-18
: specification 9-27

demultiplexer. See DMX

dense wavelength division multiplexing. See DWDM

DMX

: connecting to WCM 6-5
: description 2-3, 2-17
: installation 6-3
: location (figure) 6-1
: primary chassis specifications 9-20

documentation

: feedback xix
: ordering xvii

DWDM 2-17, 6-1

E

electrical safety 1-2

extension chassis A

(figure) 2-7

configurations 9-2

MUX and DMX

: support 9-21

extension chassis B

: (figure) 2-7
: configurations 9-3
: MUX and DMX support 9-21

extension chassis C

(figure) 2-8

configurations 9-3

MUX and DMX

: support 9-22

eye safety 1-2

F

: fan system replacement 2-13

I

: International Telecommunication Union (ITU) 2-2

L

: LAN 2-1
: linear add-drop 2-1

M

MAN 2-1

mounting 4-3

multiplexer. See MUX

MUX

: connecting to WCM 6-5
: described 2-3, 2-17, 6-1
: installation 6-3
: primary chassis specifications 9-20

MUX and DMX modules 2-17

N

NEMI

: described 2-18
: specifications 9-24
: using with RSM 8-1

O

: OADM 2-1
: optical connectors 5-1, 6-2
: organization of the guide xiv
: OTM 2-1

P

point-to-point 2-1

power cord selection 1-2

power requirements 3-2

primary chassis 2-6, 9-2

MUX and DMX

: specifications 9-20

PSMs

: described 2-13

R

remote link testing 3-3

remote switch module. See RSM

RSM

: automatic mode 8-8
: described 2-4, 2-17, 8-1
: installation 8-4
: LEDs 8-3
: lock mode 8-8
: operation 8-8
: optical connectors 8-4
: pushbuttons 8-3
: specifications 9-23

S

safety

: electrical 1-2
: eye 1-2

single-mode fiber 2-2

specifications 9-1

T

: two-fiber rings 2-1

W

wavelength 5-1

wavelength division multiplexing channel modules. See WCMs

WCM

: adding and replacing 5-2
: channel modules 2-16
: connecting with MUX and DMX 4-6
: described 2-16, 5-1
: installation 2-2


: labeling descriptions 2-12
: removing 5-6
: specifications 9-5

Table of Contents

index