Cisco Metro 1500 Series Specifications

The primary chassis and the extension chassis are built on the same chassis. Table 9-1 lists the chassis specifications for the Cisco Metro 1500 series system.

Table 9-1: Chassis Specifications

Description Specification

Width

440 (482) mm

Length

305 mm

Height

222 mm

Operation temperature

5 to 45°C (long term conditions)
-5 to 50°C (short term conditions)

Storage temperature

-10 to 70°C

Transportation temperature

-10 to 70°C

Humidity

10 to 90% RH noncondensing

MTBF at 25°C

442488 hr

FITs at 25°C

2260

MTTR

0.34 hr

Voltage

110-120/210-240 VAC 50/60 Hz auto switching
or
-48 VDC

Voltage range

99-127.2/189-254.4 V AC
or
-40 to -80 V DC

Current max.

2.5A AC
or
4.0A DC

Power consumption max.

Max. 150 VA

Fuses

2.5A, 250V, slow blowing, 5x20 mm (for AC version)
or
6.3A, 250V, slow blowing, 5x20 mm for (for DC version)

Description Specification

Weight

Max. 25 kg

Fans

Two redundant fans

Power supplies

Two redundant power supplies

Wavelength Channel Module (WCM) S pecifications

The Cisco Metro 1500 series system supports nine different WCM configurations. See Table 9-2 through Table 9-10.

Low-Speed Transparent
Low-Speed Multiclock
High-Speed Transparent
High-Speed with 622 Mbps Clock
High-Speed with Low-Speed Multiclock
High-Speed with 1062 Mbps Clock
High-Speed with 1062 Mbps Clock for Coupling Link
High-Speed with 1062 or 1244 Mbps Clock
High-Speed with 2.488 Gbps Clock

Low-Speed Transparent

Table 9-2: Low-Speed Transparent WCM Specifications

Data Rate

Range

100 to 200 Mbps

Local Link Ports ¹

Transmitter wavelength

1260 to 1310 nm

Receiver wavelength

1260 to 1570 nm

Receiver dynamic range

-5.0 to -28.0 dBm

Transmitter output power

-16.0 to -21.0 dBm

Fiber type

Single mode or multimode

Link distance

1 km (single mode) or 0.2 km (multimode)

Connector type

MiniSC

Remote Link Ports¹

Wavelength

1 to 32 in the range from 1531.90 to 1600.60 nm according to ITU-T G.692

Transmitter Output Power (measured at WCM output)

Standard

+2.5 to -2.0 dBm

Extended

+6.0 to +3.0 dBm

Link Loss Budget

Standard without RSM

3 to 17 dB

Standard with RSM

Up to 10 dB

Extended without RSM

5 to 22 dB

Extended with RSM

Up to 15 dB

Calculated Link Distance

Standard without RSM

Up to 60 km

Standard with RSM

Up to 40 km

Extended without RSM

Up to 80 km

Extended with RSM

Up to 55 km

System Performance

Bit error ratio

10^-12 for all applications
10^-15 for Enterprise System Connection (ESCON)

Applications

Supported applications

FDDI, Fast Ethernet, ATM, OC-3, STM-1, ESCON, fiber channel, plus proprietary protocols within the data range

Reliability

Mean time between failure (MTBF) at 25°C

1188655 hr

FITs at 25°C

841

Mean time to repair (MTTR)

0.12 hr

¹Local and remote optical loop only, specified for test and installation purposes only.

Low-Speed Multiclock

Table 9-3: Low-Speed Multiclock WCM Specifications

Data Rate

Range

100 to 200 Mbps

Clock Data Rates

125, 155, 200 Mbps

Local Link Ports ¹

Transmitter wavelength

1260 to 1310 nm

Receiver wavelength

1260 to 1570 nm

Receiver dynamic range

-5.0 to -28.0 dBm

Transmitter output power

-16.0 to -21.0 dBm

Fiber type

Single mode or multimode

Link distance

1 km (single mode) or 0.2 km (multimode)

Connector type

MiniSC

Remote Link Ports¹

Wavelength

1 to 32 in the range from 1531.90 to 1600.60 nm according to ITU-T G.692

Transmitter Output Power (measured at WCM output)

Standard

+2.5 to -2.0 dBm

Extended

+6.0 to +3.0 dBm

Link Loss Budget

Standard without RSM

3 to 17 dB

Standard with RSM

Up to 10 dB

Extended without RSM

5 to 22 dB

Extended with RSM

Up to 15 dB

Calculated Link Distance

Standard without RSM

Up to 60 km

Standard with RSM

Up to 40 km

Extended without RSM

Up to 80 km

Extended with RSM

Up to 55 km

System Performance

Bit error ratio

10^-12 for all applications
10^-15 for ESCON

Applications

Supported applications

FDDI, Fast Ethernet, ATM, OC-3, STM-1, ESCON, Fiber channel, plus proprietary protocols within the data range

Reliability

Mean time between failure (MTBF) at 25°C

1188655 hr

FITs at 25°C

841

Mean time to repair (MTTR)

0.12 hr

¹Local and remote optical loop only, specified for test and installation purposes only.

High-Speed Transparent

Table 9-4: High-Speed Transparent WCM Specifications

Data Rate

Range

100 to 1250 Mbps

Local Link Ports ¹

Transmitter wavelength

1260 to 1310 nm

Receiver wavelength

1260 to 1570 nm

Receiver dynamic range

-7.0 to -21.0 dBm

Transmitter output power

-6.0 to -12.0 dBm

Fiber type

Single mode or multimode

Link distance

1 km (single mode) or 0.2 km (multimode)

Connector type

MiniSC

Remote Link Ports¹

Wavelength

1 to 32 in the range from 1531.90 to 1600.60 nm according to ITU-T G.692

Transmitter Output Power (measured at WCM output)

Standard

+2.5 to -2.0 dBm

Extended

+6.0 to +3.0 dBm

Link Loss Budget

Standard without RSM

3 to 17 dB

Standard with RSM

Up to 10 dB

Extended without RSM

5 to 22 dB

Extended with RSM

Up to 15 dB

Calculated Link Distance

Standard without RSM

Up to 60 km

Standard with RSM

Up to 40 km

Extended without RSM

Up to 80 km

Extended with RSM

Up to 55 km

System Performance

Bit error ratio

10^-12 for all applications
10^-15 for ESCON

Applications

Supported applications

FDDI, Fast Ethernet, Gigabit Ethernet, ATM, OC-3/-12, STM-1/-4, ESCON, Fiber channel, coupling link ², plus proprietary protocols within the data range

Reliability

Mean time between failure (MTBF) at 25°C

1188655 hr

FITs at 25°C

841

Mean time to repair (MTTR)

0.12 hr

¹Local and remote optical loop only, specified for test and installation purposes only.
²Max. link distance 25 km; local receiver dynamic range: -3 dBm to -17 dBm.

High-Speed with Low-Speed Multiclock

Table 9-5: High-Speed with Low-Speed Multiclock
WCM Specifications

Data Rate

Range

100 to 1250 Mbps

Clock data rates

125, 155, 200, 266 Mbps

Local Link Ports ¹

Transmitter wavelength

1260 to 1310 nm

Receiver wavelength

1260 to 1570 nm

Receiver dynamic range

-7.0 to -21.0 dBm

Transmitter output power

-6.0 to -12.0 dBm

Fiber type

Single mode or multimode

Local Link Ports

Link distance

1 km (single mode) or 0.2 km (multimode)

Connector type

MiniSC

Remote Link Ports¹

Wavelength

1 to 32 in the range from 1531.90 to 1600.60 nm according to ITU-T G.692

Transmitter Output Power (measured at WCM output)

Standard

+2.5 to -2.0 dBm

Extended

+6.0 to +3.0 dBm

Link Loss Budget

Standard without RSM

3 to 17 dB

Standard with RSM

Up to 10 dB

Extended without RSM

5 to 22 dB

Extended with RSM

Up to 15 dB

Calculated Link Distance

Standard without RSM

Up to 60 km

Standard with RSM

Up to 40 km

Extended without RSM

Up to 80 km

Extended with RSM

Up to 55 km

System Performance

Bit error ratio

10^-12 for all applications
10^-15 for ESCON

Applications

Supported applications

FDDI, Fast Ethernet, ATM, OC-3/-12, STM-1/-4, ESCON, Fiber channel, coupling link ², Gigabit Ethernet, plus proprietary protocols within the data range

Reliability

Mean time between failure (MTBF) at 25°C

1188655 hr

FITs at 25°C

841

Mean time to repair (MTTR)

0.12 hr

¹Local and remote optical loop only, specified for test and installation purposes only.
²Max. link distance 25 km; local receiver dynamic range: -3 dBm to -17 dBm.

High-Speed with 622 Mbps Clock

Table 9-6: High-Speed with 622 Mbps Clock WCM Specifications

Data Rate

Clock Data Rates

622 Mbps

Local Link Ports ¹

Transmitter wavelength

1260 to 1310 nm

Receiver wavelength

1260 to 1570 nm

Receiver dynamic range

-7.0 to -21.0 dBm

Transmitter output power

-16.0 to -21.0 dBm

Fiber type

Single mode or multimode

Link distance

1 km (single mode) or 0.2 km (multimode)

Connector type

MiniSC

Remote Link Ports¹

Wavelength

1 to 32 in the range from 1531.90 to 1600.60 nm according to ITU-T G.692

Transmitter Output Power (measured at WCM output)

Standard

+2.5 to -2.0 dBm

Extended

+6.0 to +3.0 dBm

Link Loss Budget

Standard without RSM

3 to 17 dB

Standard with RSM

Up to 10 dB

Extended without RSM

5 to 22 dB

Extended with RSM

Up to 15 dB

Calculated Link Distance

Standard without RSM

Up to 60 km

Standard with RSM

Up to 40 km

Extended without RSM

Up to 80 km

Extended with RSM

Up to 55 km

System Performance

Bit error ratio

10^-12 for all applications
10^-15 for ESCON

Applications

Supported Applications

ATM, OC-12, STM-4, plus proprietary protocols within the data range

Reliability

Mean time between failure (MTBF) at 25°C

1188655 hr

FITs at 25°C

841

Mean time to repair (MTTR)

0.12 hr

¹Local and remote optical loop only, specified for test and installation purposes only.

High-Speed with 1062-Mbps Clock

Table 9-7: High-Speed with 1062-Mbps Clock WCM Specifications

Data Rate

Clock data rates

1062 Mbps

Local Link Ports ¹

Transmitter wavelength

1260 to 1310 nm

Receiver wavelength

1260 to 1570 nm

Receiver dynamic range

-7.0 to -21.0 dBm

Transmitter output power

-6.0 to -12.0 dBm

Fiber type

Single mode or multimode

Link distance

1 km (single mode) or 0.2 km (multimode)

Connector type

MiniSC

Remote Link Ports¹

Wavelength

1 to 32 in the range from 1531.90 to 1600.60 nm according to ITU-T G.692

Transmitter Output Power (measured at WCM output)

Standard

+2.5 to -2.0 dBm

Extended

+6.0 to +3.0 dBm

Link Loss Budget

Standard without RSM

3 to 17 dB

Standard with RSM

Up to 10 dB

Extended without RSM

5 to 22 dB

Extended with RSM

Up to 15 dB

Calculated Link Distance

Standard without RSM

Up to 60 km

Standard with RSM

Up to 40 km

Extended without RSM

Up to 80 km

Extended with RSM

Up to 55 km

System Performance

Bit error ratio

10^-12 for all applications

Applications

Supported applications

Fiber channel plus proprietary protocols within the data range

Reliability

Mean time between failure (MTBF) at 25°C

1188655 hr

FITs at 25°C

841

Mean time to repair (MTTR)

0.12 hr

¹Local and remote optical loop only, specified for test and installation purposes only.

High-Speed with 1062- or 1244-Mbps Clock

Table 9-9: High-Speed with 1062- or 1244-Mbps Clock WCM Specifications

Data Rate

Clock data rates

1062, 1244 Mbps

Local Link Ports ¹

Transmitter wavelength

1260 to 1310 nm

Receiver wavelength

1260 to 1570 nm

Receiver dynamic range

-7.0 to -21.0 dBm

Transmitter output power

-6.0 to -12.0 dBm

Fiber type

Single mode or multimode

Link distance

1 km (single mode) or 0.2 km (multimode)

Connector type

MiniSC

Remote Link Ports¹

Wavelength

1 to 32 in the range from 1531.90 to 1600.60 nm according to ITU-T G.692

Transmitter Output Power (measured at WCM output)

Standard

+2.5 to -2.0 dBm

Extended

+6.0 to +3.0 dBm

Link Loss Budget

Standard without RSM

3 to 17 dB

Standard with RSM

Up to 10 dB

Extended without RSM

5 to 22 dB

Extended with RSM

Up to 15 dB

Calculated Link Distance

Standard without RSM

Up to 60 km

Standard with RSM

Up to 40 km

Extended without RSM

Up to 80 km

Extended with RSM

Up to 55 km

System Performance

Bit error ratio

10^-12 for all applications

Applications

Supported applications

Fiber channel, OC-12, STM-4, and proprietary protocols at the data rates.

Reliability

Mean time between failure (MTBF) at 25°C

1188655 hr

FITs at 25°C

841

Mean time to repair (MTTR)

0.12 hr

¹Local and remote optical loop only, specified for test and installation purposes only.

2.488-Gbps Clock

Table 9-10: 2.488-Gbps Clock WCM Specifications

Data Rate

Clock data rate

2.488 Gbps

Local Link Ports ¹

Transmitter wavelength

1260 to 1310 nm

Receiver wavelength

1260 to 1570 nm

Receiver dynamic range

-3.0 to -18.0 dBm

Transmitter output power

-3.0 to -10.0 dBm

Fiber type

Single mode

Link distance

1 km

Connector type

MiniSC

Remote Link Ports¹

Wavelength

1 to 32 in the range from 1531.90 to 1600.60 nm according to ITU-T G.692

Transmitter Output Power (measured at WCM output)

Standard

+7.0 to -4.0 dBm

Link Loss Budget

Without RSM

8 to 17 dB

With RSM

Up to 10 dB

Calculated Link Distance

Without RSM

Up to 60 km

With RSM

Up to 40 km

System Performance

Bit error ratio

10^-12 for all applications

Applications

Supported applications

OC-48, STM-16, plus proprietary protocols within the data range

Reliability

Mean time between failure (MTBF) at 25°C

1188655 hr

FITs at 25°C

841

Mean time to repair (MTTR)

0.12 hr

¹Local and remote optical loop only, specified for test and installation purposes only.

Multiplexer and Demultiplexer Modules

Four MUX and DMX pairs are supported, one set for the primary chassis and one set each for extension chassis A, B, and, C.

Primary Chassis MUX and DMX (1 to 8 of 32)

The primary chassis MUX and DMX pair described in Table 9-11 supports up to eight WCMs with their associated wavelengths.

Table 9-11: Primary Chassis MUX and DMX Support

WCM Channel Number Wavelength (nm)

1

1558.98

2

1557.36

3

1555.75

4

1554.13

5

1552.52

6

1550.92

7

1549.32

8

1547.72

Specification

Insertion loss

Max. 10 dB

Channel insulation

Min. 30 dB

WCM Channel Number	Wavelength (nm)
1	1558.98
2	1557.36
3	1555.75
4	1554.13
5	1552.52
6	1550.92
7	1549.32
8	1547.72
Specification
Insertion loss	Max. 10 dB
Channel insulation	Min. 30 dB

Extension Chassis A MUX and DMX (9 to 16 of 32)

The extension chassis A MUX and DMX pair described in Table 9-12 supports up to eight WCMs with their associated wavelengths.

Table 9-12: Extension Chassis A MUX and DMX Support

WCM Channel Number Wavelength (nm)

9

1542.94

10

1541.35

11

1539.77

12

1538.19

13

1536.61

14

1535.04

15

1533.47

16

1531.90

Specification

Insertion loss

Max. 10 dB

Channel insulation

Min. 30 dB

WCM Channel Number	Wavelength (nm)
9	1542.94
10	1541.35
11	1539.77
12	1538.19
13	1536.61
14	1535.04
15	1533.47
16	1531.90
Specification
Insertion loss	Max. 10 dB
Channel insulation	Min. 30 dB

Extension Chassis B MUX and DMX (17 to 24 of 32)

The extension chassis B MUX and DMX pair described in Table 9-13 supports up to eight WCMs with their associated wavelengths.

Table 9-13: Extension Chassis B MUX and DMX Support

WCM Channel Number Wavelength (nm)

17

1572.06

18

1573.71

19

1575.37

20

1577.03

21

1578.69

22

1580.35

23

1582.02

24

1583.69

Specification

Insertion loss

Max. 10 dB

Channel insulation

Min. 30 dB

WCM Channel Number	Wavelength (nm)
17	1572.06
18	1573.71
19	1575.37
20	1577.03
21	1578.69
22	1580.35
23	1582.02
24	1583.69
Specification
Insertion loss	Max. 10 dB
Channel insulation	Min. 30 dB

Extension Chassis C MUX and DMX (25 to 32 of 32)

The extension chassis C MUX and DMX pair described in Table 9-14 supports up to eight WCMs with their associated wavelengths.

Table 9-14: Extension Chassis C MUX and DMX Support

WCM Channel Number Wavelength (nm)

25

1588.73

26

1590.41

27

1592.10

28

1593.79

29

1595.49

30

1597.19

31

1598.89

32

1600.60

Specification

Insertion loss

Max. 10 dB

Channel insulation

Min. 30 dB

WCM Channel Number	Wavelength (nm)
25	1588.73
26	1590.41
27	1592.10
28	1593.79
29	1595.49
30	1597.19
31	1598.89
32	1600.60
Specification
Insertion loss	Max. 10 dB
Channel insulation	Min. 30 dB

Band Splitter Module

Table 9-15 describes BSM support for four groups with the following wavelength ranges.

Table 9-15: BSM Specification

Group Wavelength Range (nm)

1 to 8

1547 to 1559

9 to 16

1531 to 1544

17 to 24

1571 to 1585

25 to 32

1588 to 1601

Specification

Insertion loss

Max. 2 dB

Channel insulation

Min. 30 dB

Group	Wavelength Range (nm)
1 to 8	1547 to 1559
9 to 16	1531 to 1544
17 to 24	1571 to 1585
25 to 32	1588 to 1601
Specification
Insertion loss	Max. 2 dB
Channel insulation	Min. 30 dB

Remote Switch Module

Table 9-16 shows the RSM specifications.

Table 9-16: RSM Specifications

Specification

Fiber route diversity

1:1 Protection

Switch over time

< 50 ms

Insertion loss

Max. 2 dB

Insulation

Min. 30 dB

Specification
Fiber route diversity	1:1 Protection
Switch over time	< 50 ms
Insertion loss	Max. 2 dB
Insulation	Min. 30 dB

Network Element Management Interface

Table 9-17 describes the NEMI hardware, interface, and software specifications.

Table 9-17: NEMI Specifications

Specification

Hardware

RAM

16 MB

Flash

12 MB

Processor

AMD 486, 133 MHz

WatchDog

Yes

BIOS

Year 2000 compliant

Interfaces

EIA/TIA-232

38.4 kbps with a direct connection over Laplink cable, PPP connection over a leased line, or dial in using a modem

Net interface

Personal Computer Interconnect network interface (PCI) 10 Mbps

BUS 1

Proprietary

BUS 2

Proprietary

Software

OS

LINUX 2.0.35

Protocols

PPP, FTP, Telnet, SNMP

Applications

Netconfig, SNMP config, ocmstate

Specification
Hardware
RAM	16 MB
Flash	12 MB
Processor	AMD 486, 133 MHz
WatchDog	Yes
BIOS	Year 2000 compliant
Interfaces
EIA/TIA-232	38.4 kbps with a direct connection over Laplink cable, PPP connection over a leased line, or dial in using a modem
Net interface	Personal Computer Interconnect network interface (PCI) 10 Mbps
BUS 1	Proprietary
BUS 2	Proprietary
Software
OS	LINUX 2.0.35
Protocols	PPP, FTP, Telnet, SNMP
Applications	Netconfig, SNMP config, ocmstate

SNMP Features

SNMP provides an upgrade path for application software. The reprogramming of the Flash disk over Ethernet or serial port service depends on a maintenance contract. Table 9-18 shows the SNMP configuration data.

Note All data marked Automatic read is automatically supplied to the NEMI.

Table 9-18: SNMP Configuration Data

Feature SNMP Management

WCM

Serial no.

Automatic read

Channel location

Automatic read

Clock (yes/no)

Automatic read

Cooled laser (yes/no)

Automatic read

Chassis

Power supply available (yes/no)

Automatic read

Fan available (yes/no)

Automatic read

Feature	SNMP Management
WCM
Serial no.	Automatic read
Channel location	Automatic read
Clock (yes/no)	Automatic read
Cooled laser (yes/no)	Automatic read
Chassis
Power supply available (yes/no)	Automatic read
Fan available (yes/no)	Automatic read

Table 9-19 shows the SNMP monitoring of technical operation conditions.

Table 9-19: SNMP Monitoring Technical Operating Conditions

Feature SNMP Management

Generally

Power supply failure (yes/no)

Automatic read

Fan failure (yes/no)

Automatic read

Environmental temperature (of converter card)

Automatic read

Laser temperature
(stabilized laser only)

Automatic read

Laser current
(stabilized laser only)

Automatic read

Local Receiver

Loss of signal

Read

Remote Receiver

Loss of signal

Read

Local Transmitter

Status of laser (on/off)

Read

Remote Transmitter

Status of laser (on/off)

Read

Multiclock

Enable (on/off)

Read/write ¹

Read clock setting
(125, 155 or 200, 266 Mbps)

Read

Set clock to 125, 155, 200, 266 Mbps

Write ¹

Clock Synchronized (yes/no)

Read specification

¹We do not recommend this because SNMP does not require a password. It's better through Telnet with a password requirement.

Feature	SNMP Management
Generally
Power supply failure (yes/no)	Automatic read
Fan failure (yes/no)	Automatic read
Environmental temperature (of converter card)	Automatic read
Laser temperature (stabilized laser only)	Automatic read
Laser current (stabilized laser only)	Automatic read
Local Receiver
Loss of signal	Read
Remote Receiver
Loss of signal	Read
Local Transmitter
Status of laser (on/off)	Read
Remote Transmitter
Status of laser (on/off)	Read
Multiclock
Enable (on/off)	Read/write ¹
Read clock setting (125, 155 or 200, 266 Mbps)	Read
Set clock to 125, 155, 200, 266 Mbps	Write ¹
Clock Synchronized (yes/no)	Read specification

Device Element Management Interface

Table 9-20 shows the DEMI specifications.

Note All data access is performed through the NEMI.

Table 9-20: DEMI Specifications

Interfaces

BUS 1

Proprietary

BUS 2

Proprietary

Description	Specification
Width	440 (482) mm
Length	305 mm
Height	222 mm
Operation temperature	5 to 45°C (long term conditions) -5 to 50°C (short term conditions)
Storage temperature	-10 to 70°C
Transportation temperature	-10 to 70°C
Humidity	10 to 90% RH noncondensing
MTBF at 25°C	442488 hr
FITs at 25°C	2260
MTTR	0.34 hr
Voltage	110-120/210-240 VAC 50/60 Hz auto switching or -48 VDC
Voltage range	99-127.2/189-254.4 V AC or -40 to -80 V DC
Current max.	2.5A AC or 4.0A DC
Power consumption max.	Max. 150 VA
Fuses	2.5A, 250V, slow blowing, 5x20 mm (for AC version) or 6.3A, 250V, slow blowing, 5x20 mm for (for DC version)
Description	Specification
Weight	Max. 25 kg
Fans	Two redundant fans
Power supplies	Two redundant power supplies

Data Rate
Range	100 to 200 Mbps
Local Link Ports ¹
Transmitter wavelength	1260 to 1310 nm
Receiver wavelength	1260 to 1570 nm
Receiver dynamic range	-5.0 to -28.0 dBm
Transmitter output power	-16.0 to -21.0 dBm
Fiber type	Single mode or multimode
Link distance	1 km (single mode) or 0.2 km (multimode)
Connector type	MiniSC
Remote Link Ports¹
Wavelength	1 to 32 in the range from 1531.90 to 1600.60 nm according to ITU-T G.692
Transmitter Output Power (measured at WCM output)
Standard	+2.5 to -2.0 dBm
Extended	+6.0 to +3.0 dBm
Link Loss Budget
Standard without RSM	3 to 17 dB
Standard with RSM	Up to 10 dB
Extended without RSM	5 to 22 dB
Extended with RSM	Up to 15 dB
Calculated Link Distance
Standard without RSM	Up to 60 km
Standard with RSM	Up to 40 km
Extended without RSM	Up to 80 km
Extended with RSM	Up to 55 km
System Performance
Bit error ratio	10^-12 for all applications 10^-15 for Enterprise System Connection (ESCON)
Applications
Supported applications	FDDI, Fast Ethernet, ATM, OC-3, STM-1, ESCON, fiber channel, plus proprietary protocols within the data range
Reliability
Mean time between failure (MTBF) at 25°C	1188655 hr
FITs at 25°C	841
Mean time to repair (MTTR)	0.12 hr

Data Rate
Range	100 to 1250 Mbps
Local Link Ports ¹
Transmitter wavelength	1260 to 1310 nm
Receiver wavelength	1260 to 1570 nm
Receiver dynamic range	-7.0 to -21.0 dBm
Transmitter output power	-6.0 to -12.0 dBm
Fiber type	Single mode or multimode
Link distance	1 km (single mode) or 0.2 km (multimode)
Connector type	MiniSC
Remote Link Ports¹
Wavelength	1 to 32 in the range from 1531.90 to 1600.60 nm according to ITU-T G.692
Transmitter Output Power (measured at WCM output)
Standard	+2.5 to -2.0 dBm
Extended	+6.0 to +3.0 dBm
Link Loss Budget
Standard without RSM	3 to 17 dB
Standard with RSM	Up to 10 dB
Extended without RSM	5 to 22 dB
Extended with RSM	Up to 15 dB
Calculated Link Distance
Standard without RSM	Up to 60 km
Standard with RSM	Up to 40 km
Extended without RSM	Up to 80 km
Extended with RSM	Up to 55 km
System Performance
Bit error ratio	10^-12 for all applications 10^-15 for ESCON
Applications
Supported applications	FDDI, Fast Ethernet, Gigabit Ethernet, ATM, OC-3/-12, STM-1/-4, ESCON, Fiber channel, coupling link ², plus proprietary protocols within the data range
Reliability
Mean time between failure (MTBF) at 25°C	1188655 hr
FITs at 25°C	841
Mean time to repair (MTTR)	0.12 hr

Data Rate
Clock Data Rates	622 Mbps
Local Link Ports ¹
Transmitter wavelength	1260 to 1310 nm
Receiver wavelength	1260 to 1570 nm
Receiver dynamic range	-7.0 to -21.0 dBm
Transmitter output power	-16.0 to -21.0 dBm
Fiber type	Single mode or multimode
Link distance	1 km (single mode) or 0.2 km (multimode)
Connector type	MiniSC
Remote Link Ports¹
Wavelength	1 to 32 in the range from 1531.90 to 1600.60 nm according to ITU-T G.692
Transmitter Output Power (measured at WCM output)
Standard	+2.5 to -2.0 dBm
Extended	+6.0 to +3.0 dBm
Link Loss Budget
Standard without RSM	3 to 17 dB
Standard with RSM	Up to 10 dB
Extended without RSM	5 to 22 dB
Extended with RSM	Up to 15 dB
Calculated Link Distance
Standard without RSM	Up to 60 km
Standard with RSM	Up to 40 km
Extended without RSM	Up to 80 km
Extended with RSM	Up to 55 km
System Performance
Bit error ratio	10^-12 for all applications 10^-15 for ESCON
Applications
Supported Applications	ATM, OC-12, STM-4, plus proprietary protocols within the data range
Reliability
Mean time between failure (MTBF) at 25°C	1188655 hr
FITs at 25°C	841
Mean time to repair (MTTR)	0.12 hr

Data Rate
Clock data rates	1062 Mbps
Local Link Ports ¹
Transmitter wavelength	1260 to 1310 nm
Receiver wavelength	1260 to 1570 nm
Receiver dynamic range	-7.0 to -21.0 dBm
Transmitter output power	-6.0 to -12.0 dBm
Fiber type	Single mode or multimode
Link distance	1 km (single mode) or 0.2 km (multimode)
Connector type	MiniSC
Remote Link Ports¹
Wavelength	1 to 32 in the range from 1531.90 to 1600.60 nm according to ITU-T G.692
Transmitter Output Power (measured at WCM output)
Standard	+2.5 to -2.0 dBm
Extended	+6.0 to +3.0 dBm
Link Loss Budget
Standard without RSM	3 to 17 dB
Standard with RSM	Up to 10 dB
Extended without RSM	5 to 22 dB
Extended with RSM	Up to 15 dB
Calculated Link Distance
Standard without RSM	Up to 60 km
Standard with RSM	Up to 40 km
Extended without RSM	Up to 80 km
Extended with RSM	Up to 55 km
System Performance
Bit error ratio	10^-12 for all applications
Applications
Supported applications	Fiber channel plus proprietary protocols within the data range
Reliability
Mean time between failure (MTBF) at 25°C	1188655 hr
FITs at 25°C	841
Mean time to repair (MTTR)	0.12 hr

Data Rate
Clock data rates	1062, 1244 Mbps
Local Link Ports ¹
Transmitter wavelength	1260 to 1310 nm
Receiver wavelength	1260 to 1570 nm
Receiver dynamic range	-7.0 to -21.0 dBm
Transmitter output power	-6.0 to -12.0 dBm
Fiber type	Single mode or multimode
Link distance	1 km (single mode) or 0.2 km (multimode)
Connector type	MiniSC
Remote Link Ports¹
Wavelength	1 to 32 in the range from 1531.90 to 1600.60 nm according to ITU-T G.692
Transmitter Output Power (measured at WCM output)
Standard	+2.5 to -2.0 dBm
Extended	+6.0 to +3.0 dBm
Link Loss Budget
Standard without RSM	3 to 17 dB
Standard with RSM	Up to 10 dB
Extended without RSM	5 to 22 dB
Extended with RSM	Up to 15 dB
Calculated Link Distance
Standard without RSM	Up to 60 km
Standard with RSM	Up to 40 km
Extended without RSM	Up to 80 km
Extended with RSM	Up to 55 km
System Performance
Bit error ratio	10^-12 for all applications
Applications
Supported applications	Fiber channel, OC-12, STM-4, and proprietary protocols at the data rates.
Reliability
Mean time between failure (MTBF) at 25°C	1188655 hr
FITs at 25°C	841
Mean time to repair (MTTR)	0.12 hr

Data Rate
Clock data rate	2.488 Gbps
Local Link Ports ¹
Transmitter wavelength	1260 to 1310 nm
Receiver wavelength	1260 to 1570 nm
Receiver dynamic range	-3.0 to -18.0 dBm
Transmitter output power	-3.0 to -10.0 dBm
Fiber type	Single mode
Link distance	1 km
Connector type	MiniSC
Remote Link Ports¹
Wavelength	1 to 32 in the range from 1531.90 to 1600.60 nm according to ITU-T G.692
Transmitter Output Power (measured at WCM output)
Standard	+7.0 to -4.0 dBm
Link Loss Budget
Without RSM	8 to 17 dB
With RSM	Up to 10 dB
Calculated Link Distance
Without RSM	Up to 60 km
With RSM	Up to 40 km
System Performance
Bit error ratio	10^-12 for all applications
Applications
Supported applications	OC-48, STM-16, plus proprietary protocols within the data range
Reliability
Mean time between failure (MTBF) at 25°C	1188655 hr
FITs at 25°C	841
Mean time to repair (MTTR)	0.12 hr

Table of Contents

Cisco Metro 1500 Series Specifications