|
|
Current release: (March 2, 2000)
12.0(5)XS1
Prior release: 12.0(5)XS
These release notes describe all the Catalyst 6000 family ATM module releases in the 12.0XS software release train.
The following modules are supported in software release 12.0(5)XS1:
Table 1 lists the current release image names on CCO for the Catalyst 6000 family ATM modules.
Cisco IOS Release 12.0XS1 supports the Catalyst 6000 family switch ATM module. Cisco IOS Release 12.0XS1 is based on Cisco IOS Release 12.0T. Cisco IOS Release 12.0XS1 will be merged into Cisco IOS Release 12.1E, which will eventually be merged into 12.1T. All maintenance updates will be placed into CiscoIOS Release12.0S and future Cisco IOS Release 12.1T maintenance releases. No maintenance updates will be placed into Release 12.0XS1.
For more information about the Cisco IOS software release process, see the Cisco IOS Software Releases: Product Bulletin #537 located on CCO and on the Documentation CD-ROM.
These release notes do not describe features that are available in Release12.0, Release 12.0T, or other Release 12.0 Early Deployment (ED) releases.
For information about features in Release 12.0, see the Cross-Platform Release Notes for Cisco IOS Release 12.0on CCO and the Documentation CD-ROM.
For information about features in Release 12.0T, see the Release Notes for Cisco 7000 Family for Cisco IOS Release 12.0 T on CCO and the Documentation CD-ROM.
For information about features in other platforms, see the Release Notes for Cisco IOS Release12.0index on CCOand the Documentation CD-ROM.
Table 1lists the current image names for Catalyst 6000 ATM modules.
| ATM Module | Product Number | LANE SW Release | PVC Traffic-Shaping SW Release | MPOA SW Release | Latest Supervisor Engine SW Release |
|---|---|---|---|---|---|
LANE Single PHY OC-12 | WS-X6101-OC-12-MMF | 12.0(5)XS1 | 12.0(5)XS1 | 12.0(5)XS1 | 5.3.2 and later |
LANE Single PHY OC-12 | WS-X6101-OC-12-SMF | 12.0(5)XS1 | 12.0(5)XS1 | 12.0(5)XS1 | 5.3.2 and later |
Table 2 lists the software versions and applicable ordering information for the Catalyst 6000 a ATM module software.
| Software Version | Filename | Orderable Product Number Flash on System | Orderable Product Number Spare Upgrade (Floppy Media) |
|---|---|---|---|
12.0(5)XS1 | c6atm-lc-mz.120-5.XS1.bin | SC6ATM-12.0.5XS1 | SC6ATM-12.0.5XS1= |
12.0(5)XS | c6atm-lc-mz.120-5.XS.bin | SC6ATM-12.0.5XS | SC6ATM-12.0.5XS= |
This section describes the usage guidelines and restrictions for the Catalyst 6000 family ATM module software release 12.0(5)XS1.
%ATMSSCOP-4-UNMATCHUNIVERSION:(ATM0):rcv non-0 NUU in BeginPdu at UNI 3.0.Please verify peer UNI version.
LANE-3-LECS_ERROR:vc out of sync:updating old call parameters...
There are two methods for downloading a new image to the OC-12 ATM linecard:
1. To download an image from a TFTP server, at the OC-12 ATM card's console enter the following command: copy tftp bootflash
You will be asked the following questions:
Address or name of remote host []?
Enter the IP address of the TFTP server. (Entering the name does not work).
Erase bootflash:before copying? [confirm]
Answer "yes." This step is necessary due to an issue where "autoboot," which is enabled by default, boots the first image in the bootflash. If you don't erase the old image after downloading the new image, the old image will be booted.
2. To download an image from the Supervisor Engine's (NMP) PCMCIA card, perform the following two-step process.
(a) Copy the image from the TFTP server to the NMP's slot0 by entering following command from the NMP console: copy tftp slot0
(b) Once the image has been copied to the NMP's slot0, enter the following command in enable mode from the OC-12 ATM card console: copy sup-slot0:<imagename> bootflash
You will be asked the following question:
Erase bootflash:before copying? [confirm]
Answer "yes."
After the image is copied to the bootflash, boot the new image by entering the reload command.
The new features introduced in software release 12.0(5)XS1 include:
For descriptions of these features, refer to the Catalyst 5000 and 6000 Family Switches ATM Software Configuration Guide and Command Reference and the Catalyst 6000 Family Software Configuration Guide —Software Release 5.4(1).
The following features will be added in future maintenance releases:
The features in software release 12.0(5)XS include:
For descriptions of these features, refer to the Catalyst 5000 and 6000 Family Switches ATM Software Configuration Guide and Command Reference.
These sections describe the open and resolved caveats in Catalyst 6000 ATM software release 12.0(5)XS1:
This section describes open caveats in software release 12.0(5)XS1.
## ATMDRV ERROR REPORT ## THost:Host Response Status: P1CMDS_GET_BUFFERS(44 or 0x2c) Response Status = P1CMDS_STATUS_NO_BUFS(7)
%SCHED-3-STUCKMTMR: Sleep with expired managed timer 60B380CC, time 0x1458758 (00:00:00 ago).
This section describes resolved caveats in software release 12.0(5)XS1.
This section describes open caveats in software release 12.0(5)XS.
## ATMDRV ERROR REPORT ## THost:Host Response Status: P1CMDS_GET_BUFFERS(44 or 0x2c) Response Status = P1CMDS_STATUS_NO_BUFS(7)
%ATMSSCOP-4-UNMATCHUNIVERSION:(ATM0):rcv non-0 NUU in BeginPdu at UNI 3.0.Please verify peer UNI version.
%SCHED-3-STUCKMTMR: Sleep with expired managed timer 60B380CC, time 0x1458758 (00:00:00 ago).
For additional information on Catalyst 6000 family switches and command-line interface (CLI) commands, see the Catalyst 6000 Family Software Configuration Guide and the Catalyst 5000 and 6000 Family Switches ATM Software Configuration Guide and Command Reference.
For detailed hardware configuration and maintenance procedures, see the Catalyst 6000 Family Installation Guide.
For additional information on Cisco IOS commands, see the Configuration Fundamentals Command Reference publication.
Cisco Connection Online (CCO) is Cisco Systems' primary, real-time support channel. Maintenance customers and partners can self-register on CCO to obtain additional information and services.
Available 24 hours a day, 7 days a week, CCO provides a wealth of standard and value-added services to Cisco's customers and business partners. CCO services include product information, product documentation, software updates, release notes, technical tips, the Bug Navigator, configuration notes, brochures, descriptions of service offerings, and download access to public and authorized files.
CCO serves a wide variety of users through two interfaces that are updated and enhanced simultaneously: a character-based version and a multimedia version that resides on the World Wide Web (WWW). The character-based CCO supports Zmodem, Kermit, Xmodem, FTP, and Internet e-mail, and it is excellent for quick access to information over lower bandwidths. The WWW version of CCO provides richly formatted documents with photographs, figures, graphics, and video, as well as hyperlinks to related information.
You can access CCO in the following ways:
For a copy of CCO's Frequently Asked Questions (FAQ), contact cco-help@cisco.com. For additional information, contact cco-team@cisco.com.
Cisco documentation and additional literature are available in a CD-ROM package, which ships with your product. The Documentation CD-ROM, a member of the Cisco Connection Family, is updated monthly. Therefore, it might be more current than printed documentation. To order additional copies of the Documentation CD-ROM, contact your local sales representative or call customer service. The CD-ROM package is available as a single package or as an annual subscription. You can also access Cisco documentation on the World Wide Web at http://www.cisco.com, http://www-china.cisco.com, or http://www-europe.cisco.com.
If you are reading Cisco product documentation on the World Wide Web, you can submit comments electronically. Click Feedback in the toolbar and select Documentation. After you complete the form, click Submit to send it to Cisco. We appreciate your comments.
Posted: Thu Sep 21 11:55:04 PDT 2000
Copyright 1989-2000©Cisco Systems Inc.