Software Configuration Guide (5.2)

• Preface
  

Getting Started

• Product Overview

• Using the Command-Line Interface

• Configuring the Switch IP Address and Default Gateway

• Using Redundant Supervisor Engines
  

Configuring Ethernet Switching

• Configuring Ethernet & Fast Ethernet Switching

• Configuring Gigabit Ethernet Switching

• Configuring Fast EtherChannel and Gigabit EtherChannel
  

Configuring Spanning Tree

• Configuring Spanning Tree

• Configuring Spanning-Tree PortFast, UplinkFast,& BackboneFast
  

Configuring VLANs and VLAN Trunks

• Configuring VTP

• Configuring VLANs

• Configuring VLAN Trunks on Fast Ethernet and Gigabit Ethernet Ports

• Configuring Dynamic Port VLAN Membership with VMPS

• Configuring GVRP
  

Directing and Filtering Traffic

• Configuring Quality of Service

• Configuring Multicast Services

• Configuring Broadcast/Multicast Suppression

• Configuring Port Security

• Configuring IP Permit List

• Configuring Protocol Filtering
  

Monitoring and Managing the Switch

• Checking Port Status and Connectivity

• Configuring CDP

• Using Switch TopN Reports

• Configuring UDLD

• Configuring SNMP

• Configuring RMON

• Configuring SPAN

• Configuring the Network Analysis Module
  

Administering the Switch

• Administering the Switch

• Controlling Access to the Switch Using Authentication

• Modifying the Switch Boot Configuration

• Using the Flash File System

• Working With System Software Images

• Working With Configuration Files

• Configuring System Message Logging

• Configuring DNS

• Configuring NTP
  

Configuring FDDI/CDDI and Token Ring Switching

• Configuring FDDI/CDDI Switching

• Configuring FDDI 802.10 Trunks

• Configuring Token Ring Switching

• Configuring Token Ring Filters
  

Index

• Index - Software Configuration Guide (5.1)