Table of Contents

Numerics
A
B
C
D
E
F
G
H
I
K
L
M
N
O
P
Q
R
S
T
U
V

Index

Numerics

10/100 port speed, setting     4-6

802.10 trunks

See IEEE 802.10 trunks

802.1Q

See IEEE 802.1Q

802.3 RAW-to-FDDI translation     49-12

A

Access Control Entry

See ACE

access lists

IP MLS

configuration guidelines     44-10

example configurations     44-34

flow masks and     44-3

overview     44-7

IP multicast MLS and     45-8

IPX MLS

configuration guidelines     46-8

flow masks and     46-3

overview     46-6

ACE

creating     48-7

Layer 4

port numbers     48-8

protocols     48-8

addresses

ATM

address resolution     37-5

addressing structure     37-6

assigning automatically     37-7

ILMI and     37-7

LECS and     37-12

viewing default     37-11

ILMI     37-7

IP

adding to IP permit list     29-2

aliases, creating     15-6

clearing from IP permit list     29-4

designating     2-5

LANE     37-6

LECS     37-12

MAC

designating     2-5

RSM and     42-2

address-recognized bit, Token Ring     51-9

administration

overview     1-8

RSM     42-6

switch     15-1, 23-1

advertisements, VTP     9-2

aging-time

IP MLS, specifying     44-20

IPX MLS, specifying     46-17

aliases

command, creating     15-5

IP

creating     15-6

designating     2-5

All-Routes Explorers

maximum hops     10-11

reduction, Token Ring     51-10

APaRT, FDDI/CDDI and     49-12

AppleTalk interVLAN routing, configuring     41-7, 41-9

ATM

addresses

address resolution     37-5

addressing structure     37-6

assigning automatically     37-7

default, displaying     37-11

ILMI and     37-7

LECS and     37-12

CLI

accessing     2-7

checking syntax     2-13

command history     2-14

command mode summary (table)     2-8

editing command line     2-15

global configuration mode     2-9

help     2-12

interface configuration mode     2-10

line configuration mode     2-11

operating     2-8

overview     2-7

privileged EXEC mode     2-9

syntax, checking     2-13

user EXEC mode     2-9

LANE

See LANE

LECS address     37-12

modules, session to     37-10

MPOA

See MPOA

PVC traffic-shaping

default configuration     38-5

example configuration     38-7, 38-13

PVCs

removing     38-6

setting up in ATM network     38-5

unbinding     38-6

VLANs and     38-5, 38-6

traffic shaping     38-1

VCD     38-1

ATM fabric integration module

configuring

external OC-12 interface     40-3

internal interface (ATM switch side)     40-3

internal interface (Catalyst 5000 side)     40-3

default configuration     40-2

hardware and software restrictions     40-2

overview     40-1

ATM LANE

See LANE

audience     xxv

authentication

example configuration     16-20

local

configuration guidelines     16-4

default configuration     16-4

disabling     16-6

enable password, setting     16-6

enabling     16-5

login password, setting     16-6

overview     16-2

password recovery     16-7

NTP and     26-4

overview     16-1

RADIUS

configuration guidelines     16-4

deadtime, setting     16-12

default configuration     16-4

disabling     16-13

enabling     16-9

key, clearing     16-13

key, specifying     16-9

overview     16-2

retransmit count, setting     16-11

servers, clearing     16-12

servers, specifying     16-8

timeout, setting     16-10

TACACS+

configuration guidelines     16-4

default configuration     16-4

disabling     16-20

enabling     16-15

example configuration     16-20

key, specifying     16-16

login attempts allowed     16-17

overview     16-3

timeout interval     16-17

automatic packet recognition and translation

See APaRT

autonegotiation

duplex     4-7

speed     4-6

trunks     11-2

B

BackboneFast

disabling     8-9

displaying statistics     8-8

enabling     8-8

overview     8-3

banner

See login banner

blocking state, STP     7-6

BOOT environment variable     42-23

clearing     18-7

default     18-4

displaying     18-7

overview     18-3

setting     18-6

boot field

RSM

overview     42-13

setting     42-13

switch, setting     18-4

boot image

RSM and     42-4

switch and     17-2

boot ROM, RSM and     42-3

booting

configuration register, setting     18-6

fault-tolerance     42-19

ignoring NVRAM     18-6

RSM

from Flash     42-17

from network     42-18

overview     42-4

BOOTLDR environment variable     42-16, 42-23

BOOTP

obtaining IP address and     3-12

overview     3-2

BPDUs, overview     7-3

bridge forward delay, STP     7-17

bridge hello time, STP     7-17

bridge maximum aging time, STP     7-17

bridge priority, STP     7-17

bridge protocol data units

See BPDUs

broadcast suppression

bandwidth-based     27-2

disabling     27-5

enabling     27-4

hardware     27-2

overview     27-1

packet-based     27-3

software     27-3

BUS

overview     37-3

redundant     37-13

setting up     37-13

C

cache

IP MLS

displaying entries     44-24

overview     44-3

IPX MLS

displaying entries     46-19

overview     46-2

CAM

FDDI/CDDI     49-12

IP MLS     44-22

IPX MLS     46-18

Catalyst 2926G series, overview (table)     1-3

Catalyst 2948G series, overview (table)     1-3

Catalyst 4000 series, overview (table)     1-2

Catalyst 5000 series

CLI     2-2

overview (table)     1-1

redundant supervisor in     17-1

CDDI

APaRT, configuring     49-12

CAM     49-12

checking connectivity     49-15

default configuration     49-2, 50-3

example configurations

IEEE 802.10 trunking     50-4

multiswitch without trunking     49-16

single switch     49-15

ICMP unreachable messages     49-7

IEEE 802.10 trunks

configuration guidelines     50-3

configuring     50-4

overview     50-1

VTP and     50-2

IP fragmentation, configuring     49-6

IPX translations     49-10

LER

alarm, setting     49-7

cutoff, setting     49-8

MAC address learning, configuring     49-13

native VLAN, setting     49-5

neighbor notification frames     49-8

overview     49-1

PHY line state     49-9

port name, specifying     49-4

port priority, setting     49-5

TRequest parameter     49-10

TRT     49-10

user-data string, specifying     49-3

CDP

default configuration     24-2

disabling

globally     24-2

on ports     24-3

displaying neighbor information     24-4

enabling

globally     24-2

on ports     24-3

holdtime, setting     24-4

message interval, setting     24-4

overview     24-1

CGMP

disabling     36-7

enabling     36-4

joining multicast group     36-2

leave processing

disabling     36-7

enabling     36-5

leaving multicast group     36-2

multicast group

clearing     36-19

configuring     36-6, 36-10, 36-19

multicast router ports

clearing     36-19

specifying     36-18

overview     36-1

statistics, viewing     36-6

channel modes, Fast EtherChannel (table)     6-2

channels, RSM and     42-2

checksum, verifying Flash file     19-6

CIDR

static routes and     15-7

switch interfaces and     3-2

Cisco Discovery Protocol

See CDP

Cisco Group Management Protocol

See CGMP

CiscoWorks2000     31-4

classified frames     48-3

Classless InterDomain Routing

See CIDR

clear boot system flash command     18-7

clearing the configuration     21-7

CLI

ATM

accessing     2-7

checking syntax     2-13

command history     2-14

command mode summary (table)     2-8

editing command line     2-15

global configuration mode     2-9

help     2-12

interface configuration mode     2-10

line configuration mode     2-11

operating     2-8

overview     2-7

privileged EXEC mode     2-9

syntax, checking     2-13

user EXEC mode     2-9

ROM monitor     2-1

RSM

accessing from switch     2-20

command mode summary (table)     2-21

global configuration mode, accessing     2-23

interface configuration mode, accessing     2-23

IPX-router configuration mode, accessing     2-25

overview     2-19

privileged EXEC mode, accessing     2-22

ROM monitor mode, accessing     2-26

route-map configuration mode, accessing     2-25

router configuration mode, accessing     2-24

user EXEC mode, accessing     2-22

VIP2 port adapters and     2-20

switch

accessing     2-2

help     2-7

history substitution     2-6

IP addresses, designating     2-5

IP aliases, designating     2-5

MAC addresses, designating     2-5

modules, designating     2-4

operating     2-4

overview     2-2

ports, designating     2-4

VLANs, designating     2-4

clock, setting     15-4

command aliases, creating     15-5

command modes

global configuration     2-9

interface configuration     2-10

line configuration     2-11

privileged EXEC     2-9

RSM

global configuration mode, accessing     2-23

interface configuration mode, accessing     2-23

IPX-router configuration mode, accessing     2-25

privileged EXEC mode, accessing     2-22

ROM monitor mode, accessing     2-26

route-map configuration mode, accessing     2-25

router configuration mode, accessing     2-24

summary (table)     2-21

user EXEC mode, accessing     2-22

user EXEC     2-9

community strings

defining     31-3

overview     31-2

CONFIG_FILE environment variable     42-22, 42-23

configuration files

creating     21-2

downloading

from Flash device     21-4

preparation     21-3

TFTP     21-3

via TFTP     21-3

guidelines for creating     21-1

RSM

CONFIG_FILE variable and     42-22

copying     42-12

downloading     42-9

host     42-21

network     42-20

overview     42-7

specifying startup     42-20

uploading     42-7

running configuration

downloading via TFTP     21-3

uploading via TFTP     21-6

uploading

preparation     21-5

to TFTP server     21-6

configuration loss thresholds, Token Ring     51-9

configuration modes

ATM

global     2-9

interface     2-10

line     2-11

summary     2-8

RSM

global     2-23

interface     2-23

IPX-router     2-25

route-map     2-25

router     2-24

summary     2-21

configuration register

boot field

RSM     42-13

switch, setting     18-4

default setting     18-4

ignoring NVRAM at boot     18-6

overview     18-2

ROM monitor console port baud rate     18-5

setting     18-6

configuration, clearing     21-7

Configure Direct VCC     37-4

console port

downloading software images

example PC download     20-17

example UNIX download     20-18

PC procedure     20-15

preparation     20-14

UNIX procedure     20-16

establishing a connection     3-4

redundant supervisor and     17-2

ROM monitor baud rate     18-5

SLIP and     3-11

system message logging settings     22-5

user sessions

disconnecting     14-7

monitoring     14-6

contact, setting     15-3

content-addressable memory

See CAM

Control Direct VCC     37-5

Control Distribute VCC     37-5

conventions, documentation     xxix

Copper Distributed Data Interface

See CDDI

CoS

ACE and     48-7

drop thresholds

mapping     48-10

transmit     48-4

Layer 4 port numbers     48-8

Layer 4 protocols     48-8

MAC/VLAN and     48-3, 48-7

port and

configuring values     48-6

overview     48-3

reverting to default     48-7

values     48-3

CWSI Campus     31-4

D

database

LECS

default ELAN     37-16

restricted-membership ELANs     37-19

unrestricted-membership ELANs     37-18

VMPS

downloading     13-7

example configuration file     13-9

date, setting     15-4

daylight saving time

disabling adjustment     26-6

enabling adjustment     26-5

Dedicated Token Ring

See DTR

default configuration

ATM fabric integration module     40-2

ATM LANE     37-8

CDDI     49-2, 50-3

CDP     24-2

DNS     23-1

dynamic port membership     13-2

EtherChannel     6-3

Ethernet     4-4

Fast EtherChannel     6-3

Fast Ethernet     4-4

Fast Ethernet trunks     11-5

FDDI     49-2, 50-3

Gigabit EtherChannel     6-3

Gigabit Ethernet     5-6

Gigabit Ethernet trunks     11-5

GMRP     36-12

IP multicast MLS     45-6

IP permit list     29-2

IPX MLS     46-7

Layer 3 fabric integration module     43-2

local authentication     16-4

NTP     26-2

protocol filtering     28-3

PVC traffic-shaping     38-5

QoS     48-5

RADIUS authentication     16-4

RSM     42-5

SNMP     31-3

spanning-tree     7-11

supervisor engine     3-3

switch boot configuration     18-4

system message logging     22-4

TACACS+ authentication     16-4

Token Ring     51-4

UDLD     25-2

VLANs     10-6

VMPS     13-2

VTP     9-5

default gateway, configuring     3-9

destination flow mask     46-3

destination-ip flow mask     44-4

destination-source flow mask     46-3

disabled state, STP     7-10

DISL

See DTP

DNS

default configuration     23-1

disabling     23-3

domain name

clearing     23-3

setting     23-2

enabling     23-2

overview     23-1

server

clearing     23-2

specifying     23-2

setting up     23-2

system name and     15-1

system prompt and     15-1

document conventions     xxix

document organization     xxvi

documentation, related     xxx

domain name

clearing     23-3

setting     23-2

Domain Name System

See DNS

downloading

configuration files

from Flash device     21-4

preparation     21-3

RSM     42-9

TFTP     21-3

via TFTP     21-3

software images

example, multiple module     20-11, 20-12

example, single module     20-9, 20-10

example, supervisor     20-6, 20-7

overview     20-1

preparation     20-2

supervisor     20-3

switching module     20-4

DRAM, RSM and     42-5

drop thresholds

CoS mapping     48-10

transmit queue     48-4, 48-9

DTP

non-Cisco devices and     11-4

overview     11-2

DTR     51-4

dual PHY, connecting to ATM switch     37-11

duplex

Fast Ethernet     4-7

Token Ring     51-7

dynamic port VLAN membership

configuring     13-5

default configuration     13-2

example     13-10

overview     13-1

reconfirming     13-7

troubleshooting     13-8

Dynamic Trunking Protocol

See DTP

E

early token release, setting     51-8

editing command line     2-15

ELANs

address resolution     37-5

ELAN ID, configuring     39-8

LECs and     37-4

VLANs and     37-4

enable password

recovering lost     16-7

setting     3-12, 16-6

encapsulation type descriptions, trunks (table)     11-3

environment variables

BOOT

clearing     18-7

displaying     18-7

overview     18-3

RSM and     42-23

setting     18-6

RSM

BOOT     42-23

BOOTLDR     42-16, 42-23

CONFIG_FILE     42-22, 42-23

creating     42-24

modifying     42-24

overview     42-23

error messages

system message logging (syslog)     22-1

VMPS (table)     13-8

Etherchannel

See Fast EtherChannel and Gigabit EtherChannel

Ethernet

802.3 RAW-to-FDDI translation     49-12

autonegotiation, speed     4-6

checking connectivity     4-8

default configuration     4-4

FDDI 802.2-to-Ethernet translation     49-11

FDDI SNAP-to-Ethernet translation     49-11

overview     4-1

port duplex, setting     4-7

port name, setting     4-5

port priority, setting     4-5

port speed, setting     4-6

protocol filtering

See protocol filtering

examples, conventions     xxix

EXEC mode

privileged     2-9

user     2-9

F

fabric integration modules

See ATM fabric integration module and Layer  3 fabric integration module

fast aging-time, specifying     44-20

Fast EtherChannel

channel modes (table)     6-2

configuration example     6-7

configuration guidelines     6-3

configuration restrictions     6-4

configuring     6-5

default configuration     6-3

example configuration     11-11

overview     6-1

PAgP and     6-2

Fast Ethernet

autonegotiation, speed     4-6

checking connectivity     4-8

default configuration     4-4

Fast EtherChannel

See Fast EtherChannel

flow control

command keywords (table)     4-3

configuring     4-7

overview     4-3

link negotiation

configuring     4-8

overview     4-3

possible link states (table)     4-4

overview     4-1

port duplex, setting     4-7

port name, setting     4-5

port priority, setting     4-5

port speed, setting     4-6

protocol filtering

See protocol filtering

trunks

See trunks

FDDI

802.2-to-Ethernet translation     49-11

802.3 RAW-to-FDDI translation     49-12

APaRT, configuring     49-12

CAM     49-12

checking connectivity     49-15

default configuration     49-2, 50-3

example configurations

IEEE 802.10 trunking     50-4

multiswitch without trunking     49-16

single switch     49-15

ICMP unreachable messages     49-7

IEEE 802.10 trunks

configuration guidelines     50-3

configuring     50-4

example configuration     50-4

overview     50-1

VTP and     50-2

IP fragmentation, configuring     49-6

IPX translations     49-10

LER

alarm, setting     49-7

cutoff, setting     49-8

MAC address learning, configuring     49-13

native VLAN, setting     49-5

neighbor notification frames     49-8

overview     49-1

PHY line state     49-9

port name, specifying     49-4

port priority, setting     49-5

SNAP-to-Ethernet translation     49-11

TRequest parameter     49-10

TRT     49-10

user-data string, specifying     49-3

Fiber Distributed Data Interface

See FDDI

fiber-optic, detecting unidirectional links     25-1

filters

NDE

clearing     47-8

destination and source subnet, specifying     47-6

destination host, specifying     47-6

destination TCP/UDP port, specifying     47-6

overview     47-3

protocol     47-7

source host and destination TCP/UDP port     47-6

port

See secure port filtering

protocol

See protocol filtering

Token Ring

clearing     52-4

MAC address filter, adding     52-2

overview     52-1

protocol filter, adding     52-3

Flash file system

checksum, verifying     19-6

copying files     19-3

default device, setting     19-2

deleting files     19-5

formatting device     19-6

listing files     19-2

overview     19-1

restoring deleted files     19-6

verifying file checksum     19-6

Flash memory

booting RSM from     42-17

loading system image from     42-15

RSM and     42-3

Flash synchronization

examples     17-8

overview     17-3

flow control

Fast Ethernet

configuring     4-7

overview     4-3

Gigabit Ethernet

configuring     5-7

overview     5-2

keywords (table)     4-3, 5-2

flow masks

IP MLS

destination-ip     44-4

ip-flow     44-4

source-destination-ip     44-4

IP MLS entries and     44-4

IP multicast MLS and     45-3

IPX MLS

destination     46-3

destination-source     46-3

IPX MLS entries and     46-3

minimum, specifying     44-21

modes     44-3, 46-3

overview     44-3, 46-3

flows

IP MLS     44-2

IP multicast MLS

completely and partially switched     45-4

overview     45-2

IPX MLS     46-2

formatting, Flash device     19-6

Forward Delay Timer     7-2

forwarding state, STP     7-9

fragmentation, IP     49-6

frame classification     48-3

frame priority, Token Ring     51-5

frame-copied bit, Token Ring     51-9

G

GARP Multicast Registration Protocol

See GMRP

GARP timers     12-7, 36-16

Gigabit EtherChannel

configuration guidelines     6-3

configuration restrictions     6-5

configuring     6-5

default configuration     6-3

example configuration     6-9, 11-14

hardware support     6-3

overview     6-1

Gigabit Ethernet

checking connectivity     5-9

default configuration     5-6

flow control

command keywords (table)     5-2

configuring     5-7

overview     5-2

link negotiation

configuring     5-8

overview     5-3

possible link states (table)     5-3

port name, setting     5-6

port priority, setting     5-7

protocol filtering

See protocol filtering

trunks

See trunks

global configuration mode

ATM     2-9

RSM     2-23

GMRP

default configuration     36-12

disabling

globally     36-18

per-port     36-13

enabling

globally     36-12

per-port     36-12

forward-all option

disabling     36-14

enabling     36-14

hardware and software requirements     36-11

overview     36-3

registration

fixed     36-15

forbidden     36-15

normal     36-14

statistics

clearing     36-17

viewing     36-17

timers     36-16

GVRP

disabling

globally     12-9

on 802.1Q ports     12-8

enabling

globally     12-3

on 802.1Q ports     12-3

registration

fixed     12-5

forbidden     12-6

normal     12-5

statistics

clearing     12-8

viewing     12-8

timers     12-7

H

Hello Time     7-2

history

ATM CLI     2-14

switch CLI     2-6

hops, All-Routes Explorers and     10-11

I

ICMP

ping

executing     14-8

overview     14-8

time exceeded messages     14-9

traceroute and     14-9

unreachable messages, FDDI/CDDI and     49-7

IEEE 802.10 trunks

configuration guidelines     50-3

configuring     50-4

overview     50-1

VTP and     50-2

IEEE 802.1Q

configuring     11-7

example configuration     11-14, 11-24, 44-36

mapping VLANs to ISL     10-12

overview     11-1

restrictions     11-5

supported switches (table)     11-4

IGMP

configuration guidelines     36-4, 36-8

disabling     36-11

enabling     36-8

joining multicast group     36-2

leaving multicast group     36-2

overview     36-1

statistics, viewing     36-10

ILMI

address registration     37-7

keepalive timeout     37-27

images

See software images

in-band (sc0) interface

configuring     3-7

IP address, assigning     3-8

overview     3-2, 3-4

VLAN assignment     10-2

inferior BPDU, BackboneFast and     8-3

interface configuration mode

ATM     2-10

RSM     2-23

interfaces

in-band (sc0)     3-4, 3-7, 10-2

LANE and     37-9

out-of-band management (me1)     3-4, 3-8

SLIP (sl0)     3-4, 3-11

VLAN (RSM)     42-2

Internet Group Management Protocol

See IGMP

Internet protocols, supported     1-9

interVLAN routing

AppleTalk, configuring     41-7, 41-9

example configuration     41-12

IP, configuring     41-8, 41-9

IPX, configuring     41-6, 41-9

Layer 3 fabric integration module and     41-10, 43-4

overview     41-1, 42-2

IOS

RSM image     42-5

IP

CIDR and     3-2, 15-7

default gateway, configuring     3-9

interVLAN routing, configuring     41-8, 41-9

static routes     15-6

subnetworks, VLANs and     10-2

IP accounting, IP multicast MLS and     45-8

IP addresses

adding to IP permit list     29-2

aliases, creating     15-6

clearing from IP permit list     29-4

designating     2-5

setting on supervisor     3-7, 3-8

IP aliases

creating     15-6

designating     2-5

IP filter

See ACE

IP fragmentation, FDDI/CDDI and     49-6

IP MLS

access lists

configuration guidelines     44-10

example configurations     44-34

flow masks and     44-3

overview     44-7

aging-time, specifying     44-20

cache

clearing entries     44-26

overview     44-3

cache, displaying

all entries     44-24

by destination address     44-25

by MLS-RP     44-26

by source address     44-25

by specific flow     44-25

CAM entries, displaying     44-22

components     44-2

configuration guidelines

access lists     44-10

external routers     44-9

general     44-9

interaction with other features     44-10

MTU     44-11

router commands with IP MLS     44-11

configuration information, displaying     44-23

debugging

on router     44-17

on switch     44-29

disabling

on router     44-16

on router interface     44-15

on switch     44-22

enabling

on router     44-12

on router interfaces     44-14

on switch     44-19

examples

basic implementation     44-34

host-ATM-MLS-SE-MLS-RP-host     44-32

host-FDDI-MLS-SE-MLS-RP-host     44-32

host-MLS-SE-MLS-RP-host     44-29

host-MLS-SE-MLS-RP-router-host     44-30

host-router-MLS-SE-MLS-RP-host     44-30

host-router-MLS-SE-MLS-RP-router-host     44-31

unsupported topologies     44-33

fast aging-time, specifying     44-20

flow masks

access lists and     44-3

destination-ip     44-4

ip flow     44-4

IP MLS entries and     44-4

minimum, specifying     44-21

modes     44-3

overview     44-3

source-destination-ip     44-4

flows     44-2

hardware requirements     44-8

management interface

removing     44-14

specifying on router     44-14

monitoring on router     44-16

NDE

See NDE

null domain, removing interface from     44-15

operational overview     44-6

overview     1-8, 44-2

packet export rate     44-8

packet rewrite     44-5

packet threshold, specifying     44-20

routers

removing     44-21

specifying     44-19

software requirements     44-8

statistics

clearing     44-28

displaying by protocol     44-27

displaying for MLS cache entries     44-28

displaying for MLS-RPs     44-27

unsupported topologies     44-33

VLAN ID

assigning to interface     44-13

clearing from interface     44-15

VTP domain

adding interface to     44-12

IP multicast

CGMP and     36-3

GMRP and     36-11

group entries     36-18

IGMP snooping and     36-7

overview     36-1

router ports and     36-18

IP multicast MLS

components     45-2

configuration guidelines

access lists     45-8

external routers     45-8

routers     45-7

switches     45-7

default configuration     45-6

examples     45-28

flow mask     45-3

flows

completely and partially switched     45-4

overview     45-2

hardware requirements     45-6

Layer 2 forwarding table     45-2

Layer 3 MLS cache     45-2

overview     1-8, 45-2

packet rewrite     45-3

router

debug commands     45-16

disabling on interfaces     45-11

displaying interface information     45-12

enabling globally     45-9

enabling on interfaces     45-10

management interface, removing     45-11

management interface, specifying     45-11

MMLS-SE, identifying for flows     45-15

monitoring     45-14

multicast routing table, displaying     45-12

PIM, enabling     45-10

software requirements     45-6

switch

cache entries, displaying     45-20

configuration, displaying     45-18

disabling     45-18

enabling     45-17

routers, removing participating     45-18

routers, specifying participating     45-17

statistics, clearing     45-20

statistics, displaying     45-19

topologies

basic     45-5

supported     45-22

unsupported     45-26

unsupported features     45-8

IP permit list

addresses, adding     29-2

clearing entries     29-4

default configuration     29-2

disabling     29-4

enabling     29-3

overview     29-1

IP precedence, QoS and     48-3

IP traceroute

executing     14-9

overview     14-9

ip-flow flow mask     44-4

IPX

802.3 RAW-to-FDDI translation     49-12

FDDI 802.2-to-Ethernet translation     49-11

FDDI SNAP-to-Ethernet translation     49-11

FDDI/CDDI translations     49-10

interVLAN routing, configuring     41-6, 41-9

IPX MLS

access lists

configuration guidelines     46-8

flow masks and     46-3

overview     46-6

aging-time, specifying     46-17

cache

clearing entries     46-21

overview     46-2

cache, displaying

all entries     46-19

by destination address     46-20

by MLS-RP     46-21

by source address     46-20

CAM entries, displaying     46-18

components     46-2

configuration guidelines

access lists     46-8

external routers     46-7

general     46-7

interaction with other features     46-8

MTU     46-8

configuration information, displaying     46-19

debugging

on router     46-15

on switch     46-23

default configuration     46-7

disabling

on router     46-13

on router interface     46-11

on switch     46-18

enabling

on router     46-9

on router interfaces     46-10

on switch     46-16

flow masks

access lists and     46-3

destination     46-3

destination-source     46-3

IPX MLS entries and     46-3

modes     46-3

overview     46-3

flows     46-2

hardware requirements     46-6

management interface

removing     46-11

specifying on router     46-11

monitoring on router     46-13

null domain, removing interface from     46-12

operational overview     46-5

overview     1-8, 46-2

packet rewrite     46-4

routers

removing     46-17

specifying     46-16

software requirements     46-6

statistics

clearing     46-22

displaying for IPX MLS cache entries     46-22

displaying for MLS-RPs     46-22

VLAN ID

assigning to interface     46-10

clearing from interface     46-11

VTP domain

adding interface to     46-9

removing interface from     46-12

IPX-router configuration mode, RSM and     2-25

ISL

configuring     11-6

example configuration     11-10, 11-11

mapping 802.1Q VLANs     10-12

overview     11-1

supported switches (table)     11-4

K

keepalive, ILMI     37-27

Kermit

example downloads

PC procedure     20-17

UNIX procedure     20-18

PC software download procedure     20-15

preparing to download software images     20-14

UNIX software download procedure     20-16

key

RADIUS

clearing     16-13

specifying     16-9

TACACS+

clearing     16-19

specifying     16-16

L

LAN emulation

See LANE

LANE

ATM addresses

address resolution     37-5

addressing structure     37-6

automatic assignment     37-7

default, displaying     37-11

ILMI and     37-7

LECS and     37-12

BUS

overview     37-3

redundant     37-13

setting up     37-13

components     37-3

configuration guidelines     37-9

Configure Direct VCC     37-4

Control Direct VCC     37-5

Control Distribute VCC     37-5

default configuration     37-8

ELANs

address resolution     37-5

VLANs and     37-4

example configurations     37-30

ILMI

address registration     37-7

keepalive timeout     37-27

implementation plan, creating     37-8

interfaces     37-9

LEC

joining an ELAN     37-4

overview     37-3

setting up     37-14

LECS

binding     37-21

database, default ELAN     37-16

database, restricted-membership ELANs     37-19

database, unrestricted-membership ELANs     37-18

overview     37-3

redundant     37-16

starting     37-21

LES

overview     37-3

redundant     37-13

setting up     37-13

monitoring     37-22

MPOA and     39-5

Multicast Send VCC     37-5

multicast traffic and     37-6

operation     37-3

output throttling     37-26

overview     37-1

session command     37-10

subinterfaces     37-9

UNI 3.1 signaling     37-28

VCCs     37-3

verifying setup     37-22

VTP

configuring     37-24

setting up     37-24

LANE broadcast-and-unknown server

See BUS

LANE client

See LEC

LANE configuration server

See LECS

LANE server

See LES

Layer 3 shortcuts

See IP MLS, IPX MLS, or MLS

Layer 4

port numbers     48-8

protocols     48-8

Layer 2 forwarding table

IP multicast MLS and     45-2

Layer 3 fabric integration module

configuring

external ports     43-3

internal interfaces (Catalyst 5000 side)     43-3

internal interfaces (Catalyst 8510 CSR side)     43-4

default configuration     43-2

hardware and software restrictions     43-3

overview     43-1

Layer 3 MLS cache

IP multicast MLS and     45-2

LE ARP     37-3

learning state, STP     7-8

leave processing, CGMP

disabling     36-7

enabling     36-5

LEC

joining an ELAN     37-4

overview     37-3

setting up     37-14

VTP and     37-24

LECS

ATM address, configuring     37-12

binding     37-21

database

default ELAN     37-16

restricted-membership ELANs     37-19

unrestricted-membership ELANs     37-18

overview     37-3

redundant     37-16

starting     37-21

LER

alarm, setting     49-7

cutoff, setting     49-8

LES

overview     37-3

redundant     37-13

setting up     37-13

LightStream 1010

LECS ATM address and     37-12

PVC traffic-shaping and     38-8

setting up PVCs     38-9

line configuration mode     2-11

link error rate

See LER

link negotiation

Fast Ethernet

configuring     4-8

overview     4-3

Gigabit Ethernet

configuring     5-8

overview     5-3

listening state, STP     7-7

load sharing, trunking and     11-18

local authentication

configuration guidelines     16-4

default configuration     16-4

disabling     16-6

enable password

setting     16-6

enabling     16-5

login password, setting     16-6

overview     16-2

password recovery     16-7

location, setting     15-3

login banner

clearing     15-5

configuring     15-4

overview     15-4

login password

recovering lost     16-7

setting     3-12, 16-6

M

MAC addresses

blocking     30-1

designating     2-5

filters, Token Ring     52-2

learning, FDDI/CDDI     49-13

RSM and     42-2

secure port filtering and     30-1

mapping VLANs     10-12

Maximum Age Timer     7-2

me1 (out-of-band management) interface

configuring     3-8

IP address, assigning     3-9

overview     3-2

memory configuration, RSM     42-11

message-of-the-day

See login banner

metric values, switch TopN reports (table)     34-2

MIBs

Network Analysis Module and     32-3

overview     31-1

RMON/RMON2 support (table)     32-3

support list     1-10

MLSP

IP MLS

management interface and     44-14

monitoring     44-16

overview     44-3

IP multicast MLS

See multicast MLSP

IPX MLS

management interface and     46-11

monitoring     46-13

overview     46-3

MLS-RP

IP MLS

configuring     44-11

overview     44-2

removing from switch     44-21

specifying on switch     44-19

IP multicast MLS

See MMLS-RP

IPX MLS

configuring     46-8

overview     46-2

removing from switch     46-17

specifying on switch     46-16

MLS-SE

disabling IP MLS     44-22

enabling IP MLS     44-19

IP MLS

cache entries, clearing     44-26

cache entries, displaying     44-24

CAM entries, displaying     44-22

configuration information, displaying     44-23

debugging     44-29

overview     44-2

routers, removing     44-21

routers, specifying     44-19

statistics, clearing     44-28

statistics, displaying     44-27

IP multicast MLS

See MMLS-SE

IPX MLS

cache entries clearing     46-21

cache entries, displaying     46-19

CAM entries, displaying     46-18

configuration information, displaying     46-19

debugging     46-23

disabling     46-18

enabling     46-16

overview     46-2

routers, removing     46-17

routers, specifying     46-16

statistics, clearing     46-22

statistics, displaying     46-21

MMLS-RP

configuration guidelines     45-7, 45-8

debug commands     45-16

default configuration     45-6

disabling IP multicast MLS     45-11

displaying IP multicast MLS interface information     45-12

enabling IP multicast routing     45-9

enabling on interfaces     45-10

IP multicast MLS, monitoring     45-14

management interface

removing     45-11

specifying     45-11

MMLS-SE, identifying for flows     45-15

multicast routing table, displaying     45-12

overview     45-2

PIM, enabling on interface     45-10

MMLS-SE

configuration guidelines     45-7

default configuration     45-6

IP multicast MLS

configuration, displaying     45-18

disabling     45-18

enabling     45-17

entries, displaying     45-20

statistics, clearing     45-20

statistics, displaying     45-19

overview     45-2

participating routers

removing     45-18

specifying     45-17

modules

ATM

configuring     37-1, 38-1, 39-1

ATM fabric integration module

configuring     40-1

CDDI

configuring     49-1

checking status     14-1

designating on command-line     2-4

downloading software images     20-4

Ethernet

configuring     4-1, 6-1, 28-1

Fast Ethernet

configuring     4-1, 6-1, 28-1

FDDI

configuring     49-1

Gigabit Ethernet

configuring     5-1, 6-1

Layer 3 fabric integration module

configuring     43-1

Network Analysis Module

configuring     35-1

RSM

configuring     41-1, 42-1

supervisor engine

configuring     3-1

Token Ring

configuring     51-1

MOTD

See login banner

MPC

associating LEC to ELAN     39-7

configuring     39-7

example configuration     39-10

monitoring     39-8

overview     39-3

MPOA

configuration guidelines     39-6

example configurations     39-10

LANE and     39-5

MPC

associating LEC to ELAN     39-7

configuring     39-7

monitoring     39-8

overview     39-3

MPS

configuring     39-9

configuring variables     39-9

ELAN ID, configuring     39-8

monitoring     39-10

overview     39-3

NHRP and     39-4

overview     39-2

shortcut domains     39-4

terminology (table)     39-3

traffic flow     39-4

MPS

configuring     39-9

configuring variables     39-9

ELAN ID, configuring     39-8

example configuration     39-11

monitoring     39-10

NHRP routing and     39-4

overview     39-3

MTU

IP MLS and     44-11

IPX MLS and     46-8

multicast

CGMP and     36-3

GMRP and     36-11

groups

clearing     36-19

configuring     36-6, 36-10, 36-19

joining     36-2

leaving     36-2

IGMP snooping and     36-7

LANE and     37-6

overview     1-7, 36-1

router

clearing ports     36-19

specifying port for     36-18

routing table, displaying     45-12

suppression

bandwidth-based     27-2

disabling     27-5

enabling     27-4

hardware     27-2

overview     27-1

packet-based     27-3

software     27-3

multicast MLSP

management interface and     45-11

overview     45-3

multicast MLS-Route Processor

See MMLS-RP

multicast MLS-Switching Engine

See MMLS-SE

Multicast Send VCC     37-5

Multilayer Switching

See IP MLS, IPX MLS, or IP multicast MLS

Multilayer Switching Protocol

See MLSP

Multilayer Switching-Route Processor

See MLS-RP

Multilayer Switching-Switching Engine

See MLS-SE

Multiprotocol Over ATM

See MPOA

N

name, setting port     4-5, 5-6

native VLAN

802.1Q and     11-5

CDDI and     49-5

FDDI and     49-5

NDE

configuration, displaying     47-9

data collection     47-2

data export address

removing     47-8

specifying     47-4

data export collector, specifying     47-5

disabling     47-8

enabling     47-5

filters

clearing     47-8

destination and source subnet, specifying     47-6

destination host, specifying     47-6

destination TCP/UDP port, specifying     47-6

overview     47-3

protocol, specifying     47-7

source host and destination TCP/UDP port, specifying     47-6

Network Analysis Module and     35-3

overview     47-1

packet export rate     44-8

protocols

removing for statistics collection     47-7

specifying for statistics collection     47-7

statistics collection

removing protocols for     47-7

specifying protocols for     47-7

neighbor devices, displaying     24-4

neighbor notification frames, FDDI/CDDI and     49-8

netboot, RSM and     42-18

NetFlow Data Export

See NDE

NetFlow Monitor Option     35-3

Network Analysis Module

configuring     35-2

default configuration     35-2

NDE     35-3

NetFlow Monitor Option     35-3

other commands     35-5

overview     35-1

SPAN     35-3

VLAN Agents Option     35-5

VLAN Monitor Option     35-4

network configuration, RSM     42-12

network management

configuring     31-1, 32-1

overview     1-6

network security

See security

Network Time Protocol

See NTP

NFFC/NFFC II

IGMP snooping and     36-4, 36-8

IP MLS and     44-2

IP multicast MLS and     45-6

IPX MLS and     46-2

protocol filtering and     28-1

NHRP, MPOA and     39-4

NMS

SNMP, configuring     31-3

SPAN, configuring     33-2

NTP

authentication     26-4

broadcast-client mode

configuring     26-3

disabling     26-7

client mode

configuring     26-3

disabling     26-7

daylight saving time adjustment

disabling     26-6

enabling     26-5

default configuration     26-2

disabling     26-7

overview     26-1

server

clearing     26-6

specifying     26-3

time zone

clearing     26-6

setting     26-5

null domain

removing IP MLS interface from     44-15

removing IPX MLS interface from     46-12

NVRAM

ignoring content at boot     18-6

RSM and     42-3

O

out-of-band management (me1) interface

configuring     3-8

IP address, assigning     3-9

overview     3-2

output throttling, LANE and     37-26

overview

Catalyst 2926G series switches (table)     1-3

Catalyst 2948G series switches (table)     1-3

Catalyst 4000 series switches (table)     1-2

Catalyst 5000 series switches (table)     1-1

software features     1-4

supervisor engine software     1-3

P

packet export rate, IP MLS and     44-8

packet rewrite

IP MLS and     44-5

IP multicast MLS and     45-3

IPX MLS and     46-4

packet threshold, IP MLS, specifying     44-20

PAgP     6-2

passwords

enable     3-12, 16-6

login     16-6

recovering lost

on RSM     42-24

on switch     16-7

PC card, formatting     19-6

PCMCIA

See PC card

permanent virtual connections

See PVCs

permit list

See IP permit list

PHY

dual     37-11, 37-12

line state, FDDI/CDDI     49-9

PIM, IP multicast MLS and     45-10

ping

executing     14-8

overview     14-8

RSM and     42-6

testing connectivity     4-8, 5-9, 49-15

Port Aggregation Protocol

See PAgP

PortFast, configuring     8-4

ports

capabilities, checking     14-5

checking status     14-3

cost, STP     7-14

designating on command-line     2-4

duplex

Ethernet     4-7

Fast Ethernet     4-7

Token Ring     51-7

dynamic VLAN membership

configuring     13-5

default configuration     13-2

example     13-10

overview     13-1

reconfirming     13-7

troubleshooting     13-8

filtering

See secure port filtering

name

CDDI     49-4

Ethernet     4-5

Fast Ethernet     4-5

FDDI     49-4

Gigabit Ethernet     5-6

Token Ring     51-5

port-VLAN cost, STP     7-14

priority

CDDI     49-5

Ethernet     4-5

Fast Ethernet     4-5

FDDI     49-5

Gigabit Ethernet     5-7

STP     7-12

Token Ring     51-5

speed

10/100 Fast Ethernet     4-6

Token Ring     51-6

state, Token Ring STP     7-16

transmission mode, Token Ring     51-7

VLAN assignments     10-11

VLAN priority, STP     7-13

priority

CDDI ports     49-5

Ethernet ports     4-5

Fast Ethernet ports     4-5

FDDI ports     49-5

Gigabit Ethernet ports     5-7

STP     7-12

Token Ring ports     51-5

privileged EXEC mode

ATM     2-9

RSM     2-22

privileged password     3-12

prompt

configuring     15-2

overview     15-1

protocol filtering

configuring     28-3

default configuration     28-3

overview     28-1

protocol support     28-2

Token Ring     52-3

pruning, VTP

See VTP, pruning

PVC traffic-shaping

default configuration     38-5

example configurations

nonredundant     38-7

redundant     38-13

VLANs and     38-6

PVCs

removing     38-6

setting up in ATM network     38-5

traffic shaping     38-1

unbinding     38-6

VLANs and     38-5, 38-6

Q

QoS

CoS

ACE and     48-7

drop thresholds, mapping     48-10

drop thresholds, transmit     48-4

Layer 4 port numbers     48-8

Layer 4 protocols     48-8

MAC/VLAN and     48-3, 48-7

overview     48-3

ports, configuring values     48-6

ports, overview     48-3

reverting to port default     48-7

values     48-3

default configuration     48-5

disabling     48-12

enabling     48-6

frame classification     48-3

information display command     48-11

IP precedence and     48-3

overview     48-1

revert to defaults     48-11

router address     48-9

statistics     48-10

traffic flow (figure)     48-2

transmit queue

drop thresholds     48-9

overview     48-4

Quality of Service

See QoS

R

RADIUS

configuration guidelines     16-4

deadtime, setting     16-12

default configuration     16-4

disabling     16-13

enabling     16-9

key

clearing     16-13

specifying     16-9

overview     16-2

retransmit count, setting     16-11

servers

clearing     16-12

specifying     16-8

timeout, setting     16-10

RARP

obtaining IP address and     3-12

overview     3-2

redundant supervisor engine

See supervisor engine, redundant

related documentation     xxx

Remote Monitoring

See RMON

Resource Manager Essentials     31-4

rewrite, packet

IP MLS     44-5

IP multicast MLS     45-3

IPX MLS     46-4

RMON

enabling     32-2

overview     32-1

supported MIB objects     32-3

viewing data     32-2

ROM monitor

BOOT environment variable and     18-3

boot process and     18-2

CLI     2-1

configuration register and     18-2

console port baud rate     18-5

RSM and     2-26, 42-4

root switch

parameters (table)     7-2

primary, configuring     7-15

secondary, configuring     7-15

STP and     7-2

STP stability and     7-3

route-map configuration mode, RSM and     2-25

router address for QoS     48-9

router configuration mode, RSM and     2-24

router, multicast     36-18

routing table, multicast     45-12

RSM

accessing from switch     41-5

AppleTalk interVLAN routing, configuring     41-7, 41-9

boot image     42-4

boot process     42-4

boot ROM and     42-3

BOOT variable     42-23

booting from Flash     42-17

booting from network     42-18

BOOTLDR variable     42-16, 42-23

Catalyst 5000 commands and     42-26

channel 0     42-2

channel 1     42-2

CLI

accessing from switch     2-20

command mode summary (table)     2-21

global configuration mode, accessing     2-23

interface configuration mode, accessing     2-23

IPX-router configuration mode, accessing     2-25

overview     2-19

privileged EXEC mode, accessing     2-22

ROM monitor mode, accessing     2-26

route-map configuration mode, accessing     2-25

router configuration mode, accessing     2-24

user EXEC mode, accessing     2-22

CONFIG_FILE variable     42-22, 42-23

configuration file

copying     42-12

downloading     42-9

overview     42-7

specifying startup configuration     42-20

uploading     42-7

configuration guidelines     41-5

configuration mode     41-4

memory     42-11

network     42-12

overview     42-10

terminal     42-11

configuration register boot field

overview     42-13

setting     42-13

configuring     41-1, 42-1

default configuration     42-5

DRAM and     42-5

environment variables

modifying     42-24

overview     42-23

example configuration     41-12

fault-tolerant boot sequence     42-19

Flash memory and     42-3

host configuration file     42-21

interVLAN routing example     41-12

IP interVLAN routing, configuring     41-8, 41-9

IPX interVLAN routing, configuring     41-6, 41-9

loading system image from Flash     42-15

MAC addresses     42-2

network configuration file     42-20

NVRAM and     42-3

overview     41-1, 42-2

password recovery     42-24

ping and     42-6

ROM monitor image     42-4

Rxboot image     42-4

session command and     41-5

software requirements     42-5

startup system image     42-15

system image     42-4

version requirements     42-5

VIP2 port adapters, accessing     2-20

VLAN 0 and     42-2

VLAN 1 and     42-2

Rxboot image, RSM and     42-4

S

sc0 (in-band) interface

configuring     3-7

IP address, assigning     3-8

overview     3-2

VLAN assignment     10-2

secure port filtering

configuration guidelines     30-1

configuring     30-2

disabling     30-3

overview     30-1

security

configuring     29-1, 30-1

IP permit list     29-1

overview     1-6

passwords, configuring     3-12, 16-6

serial download

example PC software image download     20-17

example UNIX software image download     20-18

PC software image download procedure     20-15

preparing to download     20-14

UNIX software image download procedure     20-16

session command

ATM module and     2-7, 37-10

RSM and     41-5

shortcut domains, MPOA and     39-4

Simple Network Management Protocol

See SNMP

sl0 (SLIP) interface

configuring     3-11

overview     3-2

SLIP

console port and     3-11

sl0 interface     3-4

SLIP (sl0) interface

configuring     3-11

overview     3-2

SNMP

community strings

defining     31-3

overview     31-2

configuring     31-3

default configuration     31-3

NMS and     31-3

overview     31-1

supported RMON MIB objects     32-3

software images

downloading

example, multiple module     20-11, 20-12

example, single module     20-9, 20-10

example, supervisor     20-6, 20-7

overview     20-1

preparation     20-2

supervisor     20-3

switching module     20-4

supervisor engine, description     1-3

uploading

preparation     20-13

supervisor     20-13

source-destination-ip flow mask     44-4

source-destination-vlan flow mask     45-3

source-route bridging

See SRB

source-route switching, Token Ring and     51-3

source-route transparent bridging

See SRT bridging

SPAN

configuration guidelines     33-2

configuring     33-2

disabling     33-4

NMS and     33-2

overview     33-1

spanning-tree

See STP

spanning-tree backbone fast convergence

See BackboneFast

spanning-tree PortFast

See PortFast

Spanning-Tree Protocol

See STP

spanning-tree UplinkFast

See UplinkFast

speed

10/100 Fast Ethernet port, setting     4-6

Token Ring port, setting     51-6

SRB, Token Ring and     51-3

SRT bridging, Token Ring and     51-3

standby supervisor engine

See supervisor engine, redundant

static route, configuring     15-6

static routes

CIDR and     15-7

VLSM and     15-7

STP

BPDUs and     7-3

bridge forward delay, setting     7-17

bridge hello time, setting     7-17

bridge maximum aging time, setting     7-17

bridge priority, setting     7-17

default configuration     7-11

disabling     7-17

enabling     7-12

Forward Delay Timer     7-2

Hello Time     7-2

Maximum Age Timer     7-2

overview     1-4, 7-1

port cost, configuring     7-14

port priority, configuring     7-12

port states

blocking     7-6

disabled     7-10

forwarding     7-9

learning     7-8

listening     7-7

overview     7-4

port VLAN priority, configuring     7-13

PortFast, configuring     8-4

port-VLAN cost     7-14

root switch

election     7-2

parameters (table)     7-2

primary     7-15

secondary     7-15

stable topology and     7-3

Token Ring

overview     7-11

port state, setting     7-16

TrBRF     7-16

TrBRF functional address, setting     7-17

subinterfaces, LANE and     37-9

supervisor engine

BOOT environment variable

clearing     18-7

displaying     18-7

overview     18-3

setting     18-6

boot image     17-2

BOOTP and     3-12

configuration register

boot field, setting     18-4

ignore NVRAM, setting     18-6

overview     18-2

ROM monitor baud rate, setting     18-5

setting     18-6

configuring     3-1

console port

establishing connection     3-4

ROM monitor baud rate     18-5

SLIP and     3-11

default boot configuration     18-4

default configuration     3-3

default gateways     3-9

downloading software images     20-3

Flash file system

See Flash file system

IP address, setting     3-7, 3-8

management interfaces

me1 (out-of-band), configuring     3-8

overview     3-2

sc0 (in-band), configuring     3-7

sl0 (SLIP), configuring     3-11

me1 (out-of-band management) interface     3-8

preparing to configure     3-4

RARP and     3-12

redundant

configuration guidelines     17-4

console port and     17-2

Flash synchronization     17-3, 17-8

forcing switchover to standby     17-6

overview     1-8, 17-1

slot assignment     17-2

Supervisor Engine III     17-2

uplink ports, configuring     17-7

verifying status     17-5

ROM monitor     18-2

sc0 (in-band) interface     3-7

sl0 (SLIP) interface     3-11

software description     1-3

software images

downloading     20-3

overview     1-3

startup, specifying     18-1

uploading     20-13

startup configuration     18-1

static routes     15-6

switchover     17-6

uplink ports, standby, configuring     17-7

uploading software images     20-13

switch administration

modules, checking status     14-1

overview     1-8

ports, checking status     14-3

procedures     15-1, 23-1

switch CLI

accessing     2-2

help     2-7

history substitution     2-6

IP addresses, designating     2-5

IP aliases, designating     2-5

MAC addresses, designating     2-5

modules, designating     2-4

operating     2-4

overview     2-2

ports, designating     2-4

VLANs, designating     2-4

switch management interfaces

See supervisor engine, management interfaces

switch TopN reports

background execution     34-2

foreground execution     34-2

metric values (table)     34-2

overview     34-1

running     34-3

viewing     34-3

Switched Port Analyzer

See SPAN

switching modules

See modules

switchover

See supervisor engine, switchover

syntax, checking     2-13

syslog

buffer size, setting     22-6

configuration, displaying     22-8

configuring     22-4

daemon, configuring     22-7

default configuration     22-4

facilities (table)     22-2

logging levels, setting     22-5

message format     22-3

message log, displaying     22-9

overview     22-1

server, configuring     22-7

session settings, setting     22-4

severity levels (table)     22-3

timestamp, changing enable state     22-6

system clock, setting     15-4

system contact, setting     15-3

system image

RSM

loading from Flash     42-15

overview     42-4

startup, specifying     42-15

switch

downloading     20-3

overview     1-3

startup, specifying     18-1

uploading     20-13

system location, setting     15-3

system message logging

buffer size, setting     22-6

configuration, displaying     22-8

configuring     22-4

daemon, configuring     22-7

default configuration     22-4

facilities (table)     22-2

logging levels, setting     22-5

message format     22-3

message log, displaying     22-9

overview     22-1

server, configuring     22-7

session settings, setting     22-4

severity levels (table)     22-3

syslog daemon, configuring     22-7

timestamp, changing enable state     22-6

system name

clearing     15-3

configuring     15-2

overview     15-1

system prompt

configuring     15-2

overview     15-1