|
|
This preface describes who should read the Catalyst 5000 Series Software Configuration Guide, how it is organized, and its document conventions.
Cisco documentation and additional literature are available in a CD-ROM package, which ships with your product. The Documentation CD-ROM, a member of the Cisco Connection Family, is updated monthly. Therefore, it might be more up to date than printed documentation. To order additional copies of the Documentation CD-ROM, contact your local sales representative or call customer service. The CD-ROM package is available as a single package or as an annual subscription. You can also access Cisco documentation on the World Wide Web at http://www.cisco.com, http://www-china.cisco.com, or http://www-europe.cisco.com.
If you are reading Cisco product documentation on the World Wide Web, you can submit comments electronically:
1. Click Feedback in the toolbar.
2. Select Documentation.
3. Complete the form, click Submit, and send it to Cisco Systems.
If you are reading printed documentation that contains a response card, you can complete the card and mail it to Cisco Systems.
We appreciate your comments.
This guide is for experienced network administrators who are responsible for configuring and maintaining the Catalyst 5000 series switches.
The major sections of this guide are as follows:
| Chapter | Title | Description |
|---|---|---|
Presents an overview of the Catalyst 5000 series switches. | ||
Describes the command-line interfaces (CLIs). | ||
Describes how to configure the Catalyst 5000 series switches at a baseline level and how to install and configure a redundant Supervisor Engine II, III FSX, III FLX, or III in a Catalyst 5505, 5509, or 5500 switch. | ||
Configuring Ethernet, Fast Ethernet, and Gigabit Ethernet Switching | Describes how to configure Ethernet, Fast Ethernet, and Gigabit Ethernet switching on the Catalyst 5000 series Ethernet, Fast Ethernet, and Gigabit Ethernet modules, as well as on the supervisor engine uplink ports. | |
Configuring VLAN Trunks on Fast Ethernet and Gigabit Ethernet Ports | Describes how to configure Inter-Switch Link (ISL) and IEEE 802.1Q virtual LAN (VLAN) trunks on Fast Ethernet and Gigabit Ethernet ports. | |
Describes how to configure Token Ring switching on the Catalyst 5000 series Token Ring modules. | ||
Describes how to configure the Spanning-Tree Protocol and explains how spanning tree works. | ||
Describes how to configure ATM LANE and explains how LANE works. | ||
Describes how to configure permanent virtual connection (PVC)-supported VLANs on the ATM module. | ||
Describes how to configure permanent virtual connection (PVC)-supported VLANs on the ATM module. | ||
Describes how to configure Fiber Distributed Data Interface (FDDI) and Copper Distributed Data Interface (CDDI) switching. | ||
Describes how to configure VLAN Trunk Protocol (VTP) and VLANs on the switch. | ||
Describes how to configure VLAN Membership Policy Server (VMPS) and dynamic ports on the switch. | ||
Describes how to configure interVLAN routing on the Route Switch Module (RSM). | ||
Describes how to configure IP Multilayer Switching (MLS) and NetFlow Data Export (NDE). | ||
Describes how to configure Simple Network Management Protocol (SNMP), Remote Monitoring (RMON), and Cisco Discovery Protocol (CDP), how to configure the Network Analysis Module, and how to set up the switch for use with CiscoWorks for Switched Internetworks (CWSI) applications. | ||
Describes how to configure network security features such as TACACS+, secure port filtering, and IP permit list. | ||
Configuring Multicast Services and Broadcast/Multicast Suppression | Describes how to configure multicast services such as Internet Group Management Protocol (IGMP) snooping, Cisco Group Management Protocol (CGMP), and broadcast/multicast suppression on the Catalyst 5000 series switches. | |
Describes ping, Telnet, IP traceroute, and how to set the system name, create a login banner, configure Domain Name System (DNS), and configure Network Time Protocol (NTP). | ||
Describes how to download, upload, and manage system image files and configuration files, and how to use the Flash file system on the Supervisor Engine III, III FSX, III FLX, and RSM. | ||
Describes how to access the Cisco Management Information Base (MIB). |
Command descriptions use these conventions:
boldface font | Commands and keywords are in boldface. |
italic font | Arguments for which you supply values are in italics. |
[ ] | Elements in square brackets are optional. |
{x | y | z} | Alternative keywords are grouped in braces and separated by vertical bars. |
[x | y | z] | Optional alternative keywords are grouped in brackets and separated by vertical bars. |
string | A nonquoted set of characters. Do not use quotation marks around the string or the string will include the quotation marks. |
Screen examples use these conventions:
| Terminal sessions and information the system displays are in |
boldface screen font | Information you must enter is in boldface screen font. |
italic screen font | Arguments for which you supply values are in italic screen font. |
| |
^ | The symbol ^ represents the key labeled Control---for example, the key combination ^D in a screen display means hold down the Control key while you press the D key. |
< > | Nonprinting characters, such as passwords are in angle brackets. |
[ ] | Default responses to system prompts are in square brackets. |
!, # | An exclamation point (!) or a pound sign (#) at the beginning of a line of code indicates a comment line. |
| Indicates that screen output not relevant to the example was removed to save space and preserve clarity. |
Notes use these conventions:
Cautions use these conventions:
| Caution Means reader be careful. In this situation, you might do something that could result in equipment damage or loss of data. |
The Catalyst 5000 series publications are as follows:
Other useful publications are as follows:
Cisco Connection Online (CCO) is Cisco Systems' primary, real-time support channel. Maintenance customers and partners can self-register on CCO to obtain additional information and services.
Available 24 hours a day, 7 days a week, CCO provides a wealth of standard and value-added services to Cisco's customers and business partners. CCO services include product information, product documentation, software updates, release notes, technical tips, the Bug Navigator, configuration notes, brochures, descriptions of service offerings, and download access to public and authorized files.
CCO serves a wide variety of users through two interfaces that are updated and enhanced simultaneously: a character-based version and a multimedia version that resides on the World Wide Web (WWW). The character-based CCO supports Zmodem, Kermit, Xmodem, FTP, and Internet e-mail, and it is excellent for quick access to information over lower bandwidths. The WWW version of CCO provides richly formatted documents with photographs, figures, graphics, and video, as well as hyperlinks to related information.
You can access CCO in the following ways:
For a copy of CCO's Frequently Asked Questions (FAQ), contact cco-help@cisco.com. For additional information, contact cco-team@cisco.com.
|
|
This pointer highlights an important line of text in an example.