|
|
Table 1 summarizes the new and modified hardware and software features for Catalyst 5000 series software release 4.3 and tells you where they are documented.
| Feature | Description | Where Documented |
|---|---|---|
Supervisor Engine III FSX (WS-X5534-E1-GESX) | New supervisor engine module with fixed 1000BaseSX Gigabit Ethernet uplink ports. | Catalyst 5000 Series Supervisor Engine Installation Guide |
Supervisor Engine III FLX (WS-X5536-E1-GELX) | New supervisor engine module with fixed 1000BaseLX/LH Gigabit Ethernet uplink ports. | Catalyst 5000 Series Supervisor Engine Installation Guide |
NetFlow Feature Card (NFFC) II (WS-F5522=) | Increases IP Multilayer Switching (MLS) performance and will support additional features in future software releases. | Catalyst 5000 Series Supervisor Engine Installation Guide |
4-port 10/100BaseTX Fast EtherChannel uplink module (WS-U5537-FETX) | Provides four 10/100BaseTX Fast EtherChannel interfaces for the Supervisor Engine III | Catalyst 5000 Series Supervisor Engine Installation Guide |
Network Analysis Module (WS-X5380) | Provides extended Remote Monitoring (RMON) support and can analyze Ethernet VLAN traffic from either or both of the following:
| Catalyst 5000 Series Module Installation Guide: Catalyst 5000 Series Software Configuration Guide: "Configuring Network Management" chapter |
Catalyst 2926G series switches (WS-C2926GS and WS-C2926GL) | The Catalyst 2926GS and 2926GL are fixed-configuration switches with the NFFC, 24 10/100BaseTX ports and two Gigabit Ethernet uplink ports (either 1000BaseSX or 1000BaseLX/LH). | Catalyst 2926 Series and Catalyst 2926G Series Installation Guide Catalyst 2926 Series and Catalyst 2926G Series Software Configuration Guide |
Command-line editing | Enhanced keyboard shortcuts for working with the Catalyst 5000 series software command-line interface (CLI). | Catalyst 5000 Series Software Configuration Guide: "Command-Line Interfaces" chapter |
|
|