Specifications

This appendix provides technical specifications for the Catalyst 5000 series switches:

Catalyst 5002
Catalyst 5000 and Catalyst 5505
Catalyst 5500

Refer to the Catalyst 5000 Series Module Installation Guide for switching module and interface port specifications.

Catalyst 50 02

Catalyst 5002 specifications are provided in Table A-1.

Table A-1: **Catalyst 5002 Specifications**
Item	Specification
Environmental
Temperature, ambient operating	32°F (0°C) to 104°F (40°C)
Temperature, ambient nonoperating and storage	-40 to 158°F (-40 to 70°C)
Humidity (RH), ambient (noncondensing) operating	10% to 90%
Humidity (RH), ambient (noncondensing) nonoperating and storage	5% to 95%
Altitude, operating and nonoperating	Sea level to 10,000 ft. (3050 m)
Switching Components
Backplane	1.2-Gbps
Microprocessor	Supervisor Engine I and II: 25-MHz 68EC040 for the NMP¹ Supervisor Engine III: 150-MHz IDT R4700 RISC
Memory
Supervisor Engine I Supervisor Engine II Supervisor Engine III	DRAM²: 20 MB, Flash (onboard)-4 MB, NVRAM-256 KB DRAM: 16 MB, Flash (onboard)-4 MB, NVRAM-256 KB DRAM: 32 MB, Flash (onboard)-4 MB, PCMCIA Flash-16 MB or 20 MB, NVRAM-512 KB
Physical Characteristics
Dimensions (H x W x D)	5.75 x 17 x 18 in. (14.6 x 43.18 x 46.72 cm)
Weight	35 lb (15.9 kg) with 2 power supplies, 1 line card, and 1 supervisor engine module
AC Power
Power supply output capacity	155W maximum
System power dissipation	155W maximum configuration, 100W typical
System heat dissipation	850 Btus³/hr
AC-input voltage	100 to 240 VAC
AC frequency	47 to 63 Hz
AC-input current	5.0A maximum at 90 VAC, 3.6A maximum at 115 VAC, and 1.8A at 230 VAC
Power supply output	+5.15V @ 26A, +12V @ 1.5A, +24V @ 0.1A
DC Power
Power supp ly output capacity	175W maximum
System power dissipation	75W
DC-input voltage Typical range (U.S. and Canada) Typical range (international)	-48 VDC to -60 VDC continuous -48 VDC (nominal) -56 VDC (high) -40.5 VDC (low) -60 VDC (nominal) -72 VDC (high) -55 VDC (low)
DC-input current	6A
Power supply output	+5.15V @ 30A, +12V @ 1.5A, +24V @ 0.1A
DC power-cable wire gauge	14 AWG 90×C copper conductors
Airflow	300 cfm⁴ through system fan assembly
Agency Approvals Safety EMI ⁵	UL⁶ 1950, CSA⁷-C22.2 No. 950, EN⁸60950, and IEC⁹ 950, TS¹⁰ 001, AS/NZS¹¹ 3260 CE¹² Marking FCC¹³ Part 15, Class A (CFR¹⁴ 47) (USA), ICES¹⁵-003 Class A (Canada), EN55022 Class A (Europe), CISPR22 Class A (International), AS/NZS 3548 Class A (Australia), and VCCI Class A (Japan) with UTP EN55022 Class B (Europe), CISPR22 Class B (International), AS/NZS 3548 Class B, and VCCI¹⁶ Class B (Japan) with STP cables

¹ NMP = network management processor
² DRAM = dynamic random-access memory
³ Btus = British thermal units
⁴ cfm = cubic feet per minute
⁵ EMI = electromagnetic interference
⁶ UL = Underwriters Laboratory
⁷ CSA = Canadian Standards Association
⁸ EN = European Norm
⁹ IEC = International Electrotechnical Commission
¹⁰ TS = Technical Specification
¹¹ AS/NZS = Standards Australia/Standards New Zealand
¹² CE = European Compliance
¹³ FCC = Federal Communications Commission
¹⁴ CFR = Code of Federal Regulations
¹⁵ ICES = International Commerce Exchange Systems
¹⁶ VCCI = Voluntary Control Council for Information Technology Equipment

Catalyst 500 0 and Catalyst 5505

Catalyst 5000 and Catalyst 5505 specifications are provided in Table A-2.

**Table A-2: Catalyst 5000 and Catalyst 5505 Specifications**
Item	Specification
Environmental
Temperature, ambient operating	32°F (0°C) to 104°F (40°C)
Temperature, ambient nonoperating and storage	-40 to 167°F (-40 to 75°C)
Humidity (RH), ambient (noncondensing) operating	10% to 90%
Humidity (RH), ambient (noncondensing) nonoperating and storage	5% to 95%
Altitude, operating and nonoperating	Sea level to 10,000 ft. (3050 m)
Switching Components
Backplane	Catalyst 5000-1.2-Gbps Catalyst 5505-3.6-Gbps
Microprocessor	Supervisor Engine I and II-25-MHz 68EC040 for the NMP¹ Supervisor Engine III-150-MHz IDT R4700 RISC
Memory
Supervisor Engine I (Catalyst 5000 only) Supervisor Engine II Supervisor Engine III	DRAM²: 20 MB, Flash (onboard)-4 MB, NVRAM³-256 KB DRAM: 16 MB, Flash (onboard)-4 MB, NVRAM-256 KB DRAM: 32 MB, Flash (onboard)-4 MB, PCMCIA Flash-16 MB or 20 MB, NVRAM-512 KB
Physical Characteristics
Dimensions (H x W x D)	10.4 x 17.25 x 18.4-in. (26.4 x 43.1 x 46.0 cm) Chassis depth including cable guide is 21.64 in. (55.0 cm)
Weight	Chassis only: 43 lb (19.5 kg) Chassis fully configured with 1 supervisor engine module, 4 switching modules, and 2 power supplies: 84 lb (39 kg)
Power
Power supply output capacity	376W maximum (AC- or DC-input power supplies)
System power dissipation (AC and DC supplies)	350W maximum configuration, 200W typical with maximum configuration
System heat dissipation (AC supply)	563W (1919 Btus⁴/hr)
System heat dissipation (DC supply)	600W (2040 Btus/hr)
AC-input voltage	100 to 240 VAC wide input with power factor corrector
DC-input voltage Typical range (U.S. and Canada) Typical range (international)	-40.5 VDC to -72 VDC continuous -48 VDC (nominal) -54 VDC (high) -42 VDC (low) -60 VDC (nominal) -72 VDC (high) -52 VDC (low)
AC frequency	47 to 63 Hz
DC power-cable wire gauge	10 to 12 AWG 90×C copper conductors
AC-input current	8A maximum at 100 to 127 VAC, 4A maximum at 200 to 240 VAC with full configuration (maximum of 0.8 kVA)
DC-input current	14.0A maximum @ 48V (nominal) 11.0A maximum @ 60V (nominal)
Power supply output	+5.15V @ 70A, +12V @ 2A, +24V @ 0.12A
Airflow	95 cfm⁵ through system fan assembly
Agency Approvals Safety EMI⁶	UL⁷ 1950, CSA⁸-C22.2 No. 950, EN⁹60950, and IEC¹⁰ 950, TS¹¹ 001, AS/NZS¹² 3260 CE¹³ Marking FCC¹⁴ Part 15, Class A (CFR¹⁵ 47) (USA), ICES¹⁶-003 Class A (Canada), EN55022 Class A (Europe), CISPR22 Class A (International), AS/NZS 3548 Class A (Australia), and VCCI Class A (Japan) with UTP EN55022 Class B (Europe), CISPR22 Class B (International), AS/NZS 3548 Class B, and VCCI¹⁷ Class B (Japan) with STP cables

¹ NMP = network management processor
² DRAM = dynamic random-access memory
³ NVRAM = nonvolatile RAM
⁴ Btus = British thermal units
⁵ cfm = cubic feet per minute
⁶ EMI = electromagnetic interference
⁷ UL = Underwriters Laboratory
⁸ CSA = Canadian Standards Association
⁹ EN = European Norm
¹⁰ IEC = International Electrotechnical Commission
¹¹ TS = Technical Specification
¹² AS/NZS = Standards Australia/Standards New Zealand
¹³ CE = European Compliance
¹⁴ FCC = Federal Communications Commission
¹⁵ CFR = Code of Federal Regulations
¹⁶ ICES = International Commerce Exchange Systems
¹⁷ VCCI = Voluntary Control Council for Information Technology Equipment

Catalyst 550 0

Catalyst 5500 specifications are provided in Table A-3 .

**Table A-3: Catalyst 5500 Specifications**
Item	Specification
Environmental
Temperature, ambient operating	32°F (0°C) to 104°F (40°C)
Temperature, ambient nonoperating and storage	-4°F (-20°C) to 149°F (65°C)
Humidity (RH), ambient (noncondensing) operating	10% to 90%
Humidity (RH), ambient (noncondensing) nonoperating and storage	5% to 95%
Altitude, operating and nonoperating	Sea level to 10,000 ft (3050 m)
Vibration, operating	5 to 200 Hz, 0.5 g (1 oct/min)
Vibration, nonoperating	5 to 200 Hz, 1 g (1 oct/min) 200 to 500 Hz, 2 g (1 oct/min)
Switching Components
Backplane	3.6-Gbps 5-Gbps cell-based switching fabric for ATM
Microprocessor	Supervisor Engine II: 25-MHz 68EC040 for the NMP¹ Supervisor Engine III: 150-MHz IDT R4700 RISC
Memory
Supervisor Engine II Supervisor Engine III	DRAM: 16 MB, Flash (onboard)-4 MB, NVRAM-256 KB DRAM: 32 MB, Flash (onboard)-4 MB, PCMCIA Flash- 16 MB or 20 MB, NVRAM-512 KB
Physical Characteristics
Dimensions (H x W x D)	25 x 17.25 x 18.4 in. (62.5 x 43.1 x 46.0 cm) Depth including cable guide 21.64 in. (55.0 cm)
Weight	Chassis only: 61 lb (22.75 kg) Full configuration: 13 switching modules and 2 power supplies, 176 lb (65.65 kg)
Power
Power supply output capacity	1100W maximum (AC- or DC-input power supplies)
System power dissipation	1100W maximum configuration, 750W typical with maximum configuration
System heat dissipation	1571W (5360 Btus²/hr)
AC-input voltage	100 to 240 VAC wide input with power factor corrector
DC-input voltage Typical range (U.S. and Canada) Typical range (international)	-40.5 VDC to -72 VDC continuous -48 VDC (nominal) -54 VDC (high) -42 VDC (low) -60 VDC (nominal) -72 VDC (high) -52 VDC (low)
AC frequency	47 to 63 Hz
DC power-cable wire gauge	8 AWG 90×C copper conductors
AC-input current	16A maximum at 100 to 127 VAC, 8A maximum at 200 to 240 VAC with full configuration (maximum of 1.8 kVA)
DC-input current	35A maximum @ 48V (nominal) 27A maximum @ 60V (nominal)
Power supply output	200A @ +5.15V, 6 A @ +12V, 2A @ +24V
Airflow	285 cfm³ through system fan assembly
Agency Approvals Safety EMI⁴	UL⁵ 1950, CSA⁶-C22.2 No. 950, EN⁷60950, and IEC⁸ 950, TS⁹ 001, AS/NZS¹⁰ 3260 CE¹¹ Marking FCC¹² Part 15, Class A (CFR¹³ 47) (USA), ICES¹⁴-003 Class A (Canada), EN55022 Class A (Europe), CISPR22 Class A (International), AS/NZS 3548 Class A (Australia), and VCCI Class A (Japan) with UTP EN55022 Class B (Europe), CISPR22 Class B (International), AS/NZS 3548 Class B, and VCCI¹⁵ Class B (Japan) with STP cables

¹ NMP = network management processor
² Btus = British thermal units
³ cfm = cubic feet per minute
⁴ EMI = electromagnetic interference
⁵ UL = Underwriters Laboratory
⁶ CSA = Canadian Standards Association
⁷ EN = European Norm
⁸ IEC = International Electrotechnical Commission
⁹ TS = Technical Specification
¹⁰ AS/NZS = Standards Australia/Standards New Zealand
¹¹ CE = European Compliance
¹² FCC = Federal Communications Commission
¹³ CFR = Code of Federal Regulations
¹⁴ ICES = International Commerce Exchange Systems
¹⁵ VCCI = Voluntary Control Council for Information Technology Equipment

Table of Contents

Specifications

Specifications

Catalyst 5002

Catalyst 5000 and Catalyst 5505

Catalyst 5500

Catalyst 50 02

Catalyst 500 0 and Catalyst 5505

Catalyst 550 0