Specifications

This appendix provides technical specifications for these Catalyst 5000 family switches:

Refer to the Catalyst 5000 Family Module Installation Guide for switching module and interface port specifications.

Catalyst 50 02 Switch

Catalyst 5002 switch specifications are provided in Table A-1.

Table A-1: Catalyst 5002 Switch Specifications

Item Specification

Environmental

Temperature, ambient operating

32°F (0°C) to 104°F (40°C)

Temperature, ambient nonoperating and storage

-40 to 158°F (-40 to 70°C)

Humidity (RH), ambient (noncondensing) operating

10% to 90%

Humidity (RH), ambient (noncondensing) nonoperating and storage

5% to 95%

Altitude, operating and nonoperating

Sea level to 10,000 ft. (3050 m)

Switching Components

Backplane

1.2 Gbps

Microprocessor

Supervisor Engines I and II: 25-MHz 68EC040 for the NMP¹

Supervisor Engines II G and III G: 37.5-MHz MCF5102 for the NMP

Memory

Supervisor Engine I

Supervisor Engine II

Supervisor Engine II G

Supervisor Engine III G

DRAM²: 20 MB; Flash (onboard)-4 MB; NVRAM-256 KB

DRAM: 16 MB; Flash (onboard)-4 MB;
NVRAM-256 KB

DRAM: 32 MB; Flash (onboard)-8 MB;
NVRAM-256 KB

DRAM: 32 MB; Flash (onboard)-8 MB;
NVRAM-256 KB

Physical Characteristics

Dimensions (H x W x D)

5.75 x 17 x 18 in. (14.6 x 43.18 x 46.72 cm)

Weight

35 lb (15.9 kg) with 2 power supplies, 1 switching module, and 1 supervisor engine

Shock and Vibration

Shock

54 inches per second (1.37 meters per second)

Vibration

0.35 g from 3 to 500 Hz

AC Power without Power Factor Correction

Power supply output capacity

155W maximum

System power dissipation

155W maximum configuration, 120W typical

System heat dissipation

850 Btus³/hr

AC-input voltage

100 to 240 VAC

AC frequency

50 to 60 Hz

AC-input current

5.0A maximum

Power supply output

+5.15V @ 26A, +12V @ 1.5A, +24V @ 0.1A

AC Power with Power Factor Correction

Power supply output capacity

175W maximum

System power dissipation

175W maximum configuration, 100W typical

System heat dissipation

950 Btus/hr

AC-input voltage

90 to 264 VAC autoranging

AC frequency

47 to 63 Hz

AC-input current

3.0A maximum @ 110 VAC, 1.5A maximum @
220 VAC

Power supply output

+5.15V @ 30A, +12V @ 1.5A, +24V @ 0.1A

DC Power

Power supply output capacity

175W maximum

System power dissipation

175W maximum, 120W typical

DC-input voltage
Typical range (U.S. and Canada)
Typical range (International)

-48 VDC to -60 VDC continuous
-48 VDC (nominal) -56 VDC (high) -40.5 VDC (low)
-60 VDC (nominal) -72 VDC (high) -55 VDC (low)

DC-input current

6A

Power supply output

+5.15V @ 30A, +12V @ 1.5A, +24V @ 0.1A

DC power-cable wire gauge

14 AWG 90ºC copper conductors

Airflow
200 lfm⁴ through system fan assembly

Agency Approvals
Safety

EMI ⁵

UL⁶ 1950, CSA⁷-C22.2 No. 950, EN⁸60950, and IEC⁹ 950, TS¹⁰ 001, AS/NZS¹¹ 3260, CE¹² Marking,
EN 60825, IEC 60825, 21CFR1040

FCC¹³ Part 15, Class A (CFR¹⁴ 47) (USA), ICES¹⁵-003 Class A (Canada), EN55022 Class A (Europe), CISPR22 Class A (International), AS/NZS 3548 Class A (Australia), and VCCI Class A (Japan) with UTP¹⁶

EN55022 Class B (Europe), CISPR22 Class B (International), AS/NZS 3548 Class B, and VCCI¹⁷ Class B (Japan) with FTP¹⁸ cables

¹NMP = network management processor
²DRAM = dynamic random-access memory
³Btus = British thermal units
⁴lfm = linear feet per minute
⁵EMI = electromagnetic interference
⁶UL = Underwriters Laboratory
⁷CSA = Canadian Standards Association
⁸EN = European Norm
⁹IEC = International Electrotechnical Commission
¹⁰TS = Technical Specification
¹¹AS/NZS = Standards Australia/Standards New Zealand
¹²CE = European Compliance
¹³FCC = Federal Communications Commission
¹⁴CFR = Code of Federal Regulations
¹⁵ICES = International Commerce Exchange Systems
¹⁶UTP = unshielded twisted-pair
¹⁷VCCI = Voluntary Control Council for Information Technology Equipment
¹⁸FTP = foil twisted-pair

Item	Specification
Environmental
Temperature, ambient operating	32°F (0°C) to 104°F (40°C)
Temperature, ambient nonoperating and storage	-40 to 158°F (-40 to 70°C)
Humidity (RH), ambient (noncondensing) operating	10% to 90%
Humidity (RH), ambient (noncondensing) nonoperating and storage	5% to 95%
Altitude, operating and nonoperating	Sea level to 10,000 ft. (3050 m)
Switching Components
Backplane	1.2 Gbps
Microprocessor	Supervisor Engines I and II: 25-MHz 68EC040 for the NMP¹ Supervisor Engines II G and III G: 37.5-MHz MCF5102 for the NMP
Memory
Supervisor Engine I Supervisor Engine II Supervisor Engine II G Supervisor Engine III G	DRAM²: 20 MB; Flash (onboard)-4 MB; NVRAM-256 KB DRAM: 16 MB; Flash (onboard)-4 MB; NVRAM-256 KB DRAM: 32 MB; Flash (onboard)-8 MB; NVRAM-256 KB DRAM: 32 MB; Flash (onboard)-8 MB; NVRAM-256 KB
Physical Characteristics
Dimensions (H x W x D)	5.75 x 17 x 18 in. (14.6 x 43.18 x 46.72 cm)
Weight	35 lb (15.9 kg) with 2 power supplies, 1 switching module, and 1 supervisor engine
Shock and Vibration
Shock	54 inches per second (1.37 meters per second)
Vibration	0.35 g from 3 to 500 Hz
AC Power without Power Factor Correction
Power supply output capacity	155W maximum
System power dissipation	155W maximum configuration, 120W typical
System heat dissipation	850 Btus³/hr
AC-input voltage	100 to 240 VAC
AC frequency	50 to 60 Hz
AC-input current	5.0A maximum
Power supply output	+5.15V @ 26A, +12V @ 1.5A, +24V @ 0.1A
AC Power with Power Factor Correction
Power supply output capacity	175W maximum
System power dissipation	175W maximum configuration, 100W typical
System heat dissipation	950 Btus/hr
AC-input voltage	90 to 264 VAC autoranging
AC frequency	47 to 63 Hz
AC-input current	3.0A maximum @ 110 VAC, 1.5A maximum @ 220 VAC
Power supply output	+5.15V @ 30A, +12V @ 1.5A, +24V @ 0.1A
DC Power
Power supply output capacity	175W maximum
System power dissipation	175W maximum, 120W typical
DC-input voltage Typical range (U.S. and Canada) Typical range (International)	-48 VDC to -60 VDC continuous -48 VDC (nominal) -56 VDC (high) -40.5 VDC (low) -60 VDC (nominal) -72 VDC (high) -55 VDC (low)
DC-input current	6A
Power supply output	+5.15V @ 30A, +12V @ 1.5A, +24V @ 0.1A
DC power-cable wire gauge	14 AWG 90ºC copper conductors
Airflow	200 lfm⁴ through system fan assembly
Agency Approvals Safety EMI ⁵	UL⁶ 1950, CSA⁷-C22.2 No. 950, EN⁸60950, and IEC⁹ 950, TS¹⁰ 001, AS/NZS¹¹ 3260, CE¹² Marking, EN 60825, IEC 60825, 21CFR1040 FCC¹³ Part 15, Class A (CFR¹⁴ 47) (USA), ICES¹⁵-003 Class A (Canada), EN55022 Class A (Europe), CISPR22 Class A (International), AS/NZS 3548 Class A (Australia), and VCCI Class A (Japan) with UTP¹⁶ EN55022 Class B (Europe), CISPR22 Class B (International), AS/NZS 3548 Class B, and VCCI¹⁷ Class B (Japan) with FTP¹⁸ cables

Catalyst 500 0 and Catalyst 5505 Switches

The specifications for the Catalyst 5000 and Catalyst 5505 switches are provided in Table A-2.

Table A-2: Catalyst 5000 Switch and Catalyst 5505 Switch Specifications

Item Specification

Environmental

Temperature, ambient operating

32°F (0°C) to 104°F (40°C)

Temperature, ambient nonoperating and storage

-40 to 150ºF (-40 to 70ºC)

Humidity (RH), ambient (noncondensing) operating

10% to 90%

Humidity (RH), ambient (noncondensing) nonoperating and storage

5% to 95%

Altitude, operating and nonoperating

Sea level to 10,000 ft. (3050 m)

Switching Components

Backplane

Catalyst 5000 switch-1.2 Gbps

Catalyst 5505 switch-3.6 Gbps

Switching Components (continued)

Microprocessor

Supervisor Engines I and II: 25-MHz 68EC040 for the NMP¹

Supervisor Engine III, Supervisor Engine III F: 150-MHz IDT R4700 RISC

Supervisor Engines II G and III G: 37.5-MHz MCF5102 for the NMP

Memory

Supervisor Engine I (Catalyst 5000 switch only)

Supervisor Engine II

Supervisor Engine II G

Supervisor Engine III

Supervisor Engine III F

Supervisor Engine III G

DRAM²: 20 MB; Flash (onboard)-4 MB; NVRAM³-256 KB

DRAM: 16 MB; Flash (onboard)-4 MB; NVRAM-256 KB

DRAM: 32 MB; Flash (onboard)-8 MB;
NVRAM-256 KB

DRAM: 32 MB; Flash (onboard)-4 MB; Flash PC Card-16 MB or 20 MB; NVRAM-512 KB

DRAM: 32 MB; Flash (onboard)-4 MB;
NVRAM-512 KB

DRAM: 32 MB; Flash (onboard)-8 MB;
NVRAM-256 KB

Physical Characteristics

Dimensions (H x W x D)

10.4 x 17.25 x 18.4 in. (26.4 x 43.1 x 46.0 cm)
Chassis depth including cable guide is 21.64 in.
(55.0 cm)

Weight

Chassis only: 43 lb (19.5 kg)
Chassis fully configured with 1 supervisor engine, 4 switching modules, and 2 power supplies: 84 lb
(39 kg)

Shock and Vibration

Shock

42 inches per second (1.07 meters per second)

Vibration

0.35 g from 3 to 500 Hz

Power

Power supply output capacity

376W maximum (AC-input or DC-input power supplies)

System power dissipation (AC and DC supplies)

350W maximum configuration, 250W typical with maximum configuration

System heat dissipation (AC supply)

563W (1919 Btus⁴/hr)

System heat dissipation (DC supply)

600W (2040 Btus/hr)

AC-input voltage

100 to 127/200 to 240 VAC wide input with power factor corrector

DC-input voltage
Typical range (U.S. and Canada)
Typical range (International)

-48 VDC to -60 VDC continuous
-48 VDC (nominal) -54 VDC (high) -42 VDC (low)
-60 VDC (nominal) -72 VDC (high) -52 VDC (low)

AC frequency

50 to 60 Hz

DC power-cable wire gauge

10 to 12 AWG 90ºC copper conductors

AC-input current

8/4A with full configuration (maximum of 0.8 kVA)

DC-input current

12.0A maximum @ 48V (nominal)
10.0A maximum @ 60V (nominal)

Power supply output

+5.15V @ 70A, +12V @ 2A, +24V @ 0.12A

Airflow
200 lfm⁵ through system fan assembly

Agency Approvals
Safety

EMI ⁶

UL⁷ 1950, CSA⁸-C22.2 No. 950, EN⁹60950, and IEC¹⁰ 950, TS¹¹ 001, AS/NZS¹² 3260 CE¹³ Marking,
EN 60825, IEC 60825, 21CFR1040

FCC¹⁴ Part 15, Class A (CFR¹⁵ 47) (USA), ICES¹⁶-003 Class A (Canada), EN55022 Class A (Europe), CISPR22 Class A (International), AS/NZS 3548 Class A (Australia), and VCCI Class A (Japan) with UTP¹⁷

EN55022 Class B (Europe), CISPR22 Class B (International), AS/NZS 3548 Class B, and VCCI¹⁸ Class B (Japan) with FTP¹⁹ cables

¹NMP = network management processor
²DRAM = dynamic random-access memory
³NVRAM = nonvolatile RAM
⁴Btus = British thermal units
⁵lfm = linear feet per minute
⁶EMI = electromagnetic interference
⁷UL = Underwriters Laboratory
⁸CSA = Canadian Standards Association
⁹EN = European Norm
¹⁰IEC = International Electrotechnical Commission
¹¹TS = Technical Specification
¹²AS/NZS = Standards Australia/Standards New Zealand
¹³CE = European Compliance
¹⁴FCC = Federal Communications Commission
¹⁵CFR = Code of Federal Regulations
¹⁶ICES = International Commerce Exchange Systems
¹⁷UTP = unshielded twisted-pair
¹⁸VCCI = Voluntary Control Council for Information Technology Equipment
¹⁹FTP = foil twisted-pair

Item	Specification
Environmental
Temperature, ambient operating	32°F (0°C) to 104°F (40°C)
Temperature, ambient nonoperating and storage	-40 to 150ºF (-40 to 70ºC)
Humidity (RH), ambient (noncondensing) operating	10% to 90%
Humidity (RH), ambient (noncondensing) nonoperating and storage	5% to 95%
Altitude, operating and nonoperating	Sea level to 10,000 ft. (3050 m)
Switching Components
Backplane	Catalyst 5000 switch-1.2 Gbps Catalyst 5505 switch-3.6 Gbps
Switching Components (continued)
Microprocessor	Supervisor Engines I and II: 25-MHz 68EC040 for the NMP¹ Supervisor Engine III, Supervisor Engine III F: 150-MHz IDT R4700 RISC Supervisor Engines II G and III G: 37.5-MHz MCF5102 for the NMP
Memory
Supervisor Engine I (Catalyst 5000 switch only) Supervisor Engine II Supervisor Engine II G Supervisor Engine III Supervisor Engine III F Supervisor Engine III G	DRAM²: 20 MB; Flash (onboard)-4 MB; NVRAM³-256 KB DRAM: 16 MB; Flash (onboard)-4 MB; NVRAM-256 KB DRAM: 32 MB; Flash (onboard)-8 MB; NVRAM-256 KB DRAM: 32 MB; Flash (onboard)-4 MB; Flash PC Card-16 MB or 20 MB; NVRAM-512 KB DRAM: 32 MB; Flash (onboard)-4 MB; NVRAM-512 KB DRAM: 32 MB; Flash (onboard)-8 MB; NVRAM-256 KB
Physical Characteristics
Dimensions (H x W x D)	10.4 x 17.25 x 18.4 in. (26.4 x 43.1 x 46.0 cm) Chassis depth including cable guide is 21.64 in. (55.0 cm)
Weight	Chassis only: 43 lb (19.5 kg) Chassis fully configured with 1 supervisor engine, 4 switching modules, and 2 power supplies: 84 lb (39 kg)
Shock and Vibration
Shock	42 inches per second (1.07 meters per second)
Vibration	0.35 g from 3 to 500 Hz
Power
Power supply output capacity	376W maximum (AC-input or DC-input power supplies)
System power dissipation (AC and DC supplies)	350W maximum configuration, 250W typical with maximum configuration
System heat dissipation (AC supply)	563W (1919 Btus⁴/hr)
System heat dissipation (DC supply)	600W (2040 Btus/hr)
AC-input voltage	100 to 127/200 to 240 VAC wide input with power factor corrector
DC-input voltage Typical range (U.S. and Canada) Typical range (International)	-48 VDC to -60 VDC continuous -48 VDC (nominal) -54 VDC (high) -42 VDC (low) -60 VDC (nominal) -72 VDC (high) -52 VDC (low)
AC frequency	50 to 60 Hz
DC power-cable wire gauge	10 to 12 AWG 90ºC copper conductors
AC-input current	8/4A with full configuration (maximum of 0.8 kVA)
DC-input current	12.0A maximum @ 48V (nominal) 10.0A maximum @ 60V (nominal)
Power supply output	+5.15V @ 70A, +12V @ 2A, +24V @ 0.12A
Airflow	200 lfm⁵ through system fan assembly
Agency Approvals Safety EMI ⁶	UL⁷ 1950, CSA⁸-C22.2 No. 950, EN⁹60950, and IEC¹⁰ 950, TS¹¹ 001, AS/NZS¹² 3260 CE¹³ Marking, EN 60825, IEC 60825, 21CFR1040 FCC¹⁴ Part 15, Class A (CFR¹⁵ 47) (USA), ICES¹⁶-003 Class A (Canada), EN55022 Class A (Europe), CISPR22 Class A (International), AS/NZS 3548 Class A (Australia), and VCCI Class A (Japan) with UTP¹⁷ EN55022 Class B (Europe), CISPR22 Class B (International), AS/NZS 3548 Class B, and VCCI¹⁸ Class B (Japan) with FTP¹⁹ cables

Catalyst 550 9 Switch

Catalyst 5509 switch specifications are provided in Table A-3.

Table A-3: Catalyst 5509 Switch Specifications

Item Specification

Environmental

Temperature, ambient operating

32°F (0°C) to 104°F (40°C)

Temperature, ambient nonoperating and storage

-40 to 158°F (-40 to 70°C)

Humidity (RH), ambient (noncondensing) operating

10% to 90%

Humidity (RH), ambient (noncondensing) nonoperating and storage

5% to 95%

Altitude, operating and nonoperating

Sea level to 10,000 ft. (3050 m)

Switching Components

Backplane

3.6 Gbps

Microprocessor

Supervisor Engine II: 25-MHz 68EC040 for the NMP¹

Supervisor Engine III, Supervisor Engine III F: 150-MHz IDT R4700 RISC

Supervisor Engines II G and III G: 37.5-MHz MCF5102 for the NMP

Memory

Supervisor Engine II

Supervisor Engine II G

Supervisor Engine III

Supervisor Engine III F

Supervisor Engine III G

DRAM²: 16 MB; Flash (onboard)-4 MB; NVRAM³-256 KB

DRAM: 32 MB; Flash (onboard)-8 MB;
NVRAM-256 KB

DRAM: 32 MB; Flash (onboard)-4 MB; Flash PC Card-16 MB or 20 MB; NVRAM-512 KB

DRAM: 32 MB; Flash (onboard)-4 MB;
NVRAM-512 KB

DRAM: 32 MB; Flash (onboard)-8 MB;
NVRAM-256 KB

Physical Characteristics

Dimensions (H x W x D)

20 x 17.25 x 18.4 in. (50.8 x 43.1 x 46.0 cm)
Chassis depth including cable guide is 21.64 in.
(55.0 cm)

Weight

Chassis only: 55 lb (24.9 kg)

Chassis fully configured with 1 supervisor engine, 4 switching modules, and 2 power supplies: 135 lb (61.2 kg)

Shock and Vibration

Shock

42 inches per second (1.07 meters per second)

Vibration

0.35 g from 3 to 500 Hz

Power

Power supply output capacity

805W maximum (AC-input or DC-input power supplies)

System power dissipation (AC and DC supplies)

805W maximum configuration, 600W typical with maximum configuration

System heat dissipation (AC supply)

1150W (3920 Btus⁴/hr) maximum

System heat dissipation (DC supply)

1150W (3920 Btus/hr) maximum

AC-input voltage

100 to 240 VAC wide input with power factor corrector

DC-input voltage
Typical range (U.S. and Canada)
Typical range (International)

-48 VDC to -60 VDC continuous
-48 VDC (nominal) -54 VDC (high) -42 VDC (low)
-60 VDC (nominal) -72 VDC (high) -52 VDC (low)

AC frequency

50 to 60 Hz

DC power-cable wire gauge

10 AWG 90ºC copper conductors

AC-input current

12-6A (805W power supply) or 16-7A (1100W power supply)

DC-input current

25.0A (1100W power supply) or 40.0A (1200W power supply)

Power supply output

+5.15V @ 140A, +12V @ 4A, +24V @ 1.5A

Airflow
200 lfm⁵ through system fan assembly

Agency Approvals
Safety

EMI ⁶

UL⁷ 1950, CSA⁸-C22.2 No. 950, EN⁹60950, and IEC¹⁰ 950, TS¹¹ 001, AS/NZS¹² 3260 CE¹³ Marking,
EN 60825, IEC 60825, 21CFR1040

FCC¹⁴ Part 15, Class A (CFR¹⁵ 47) (USA), ICES¹⁶-003 Class A (Canada), EN55022 Class A (Europe), CISPR22 Class A (International), AS/NZS 3548 Class A (Australia), and VCCI Class A (Japan) with UTP¹⁷

EN55022 Class B (Europe), CISPR22 Class B (International), AS/NZS 3548 Class B, and VCCI¹⁸ Class B (Japan) with FTP¹⁹ cables

¹NMP = network management processor
²DRAM = dynamic random-access memory
³NVRAM = nonvolatile random-access memory
⁴Btus = British thermal units
⁵lfm = linear feet per minute
⁶EMI = electromagnetic interference
⁷UL = Underwriters Laboratory
⁸CSA = Canadian Standards Association
⁹EN = European Norm
¹⁰IEC = International Electrotechnical Commission
¹¹TS = Technical Specification
¹²AS/NZS = Standards Australia/Standards New Zealand
¹³CE = European Compliance
¹⁴FCC = Federal Communications Commission
¹⁵CFR = Code of Federal Regulations
¹⁶ICES = International Commerce Exchange Systems
¹⁷UTP = unshielded twisted-pair
¹⁸VCCI = Voluntary Control Council for Information Technology Equipment
¹⁹FTP = foil twisted-pair

Item	Specification
Environmental
Temperature, ambient operating	32°F (0°C) to 104°F (40°C)
Temperature, ambient nonoperating and storage	-40 to 158°F (-40 to 70°C)
Humidity (RH), ambient (noncondensing) operating	10% to 90%
Humidity (RH), ambient (noncondensing) nonoperating and storage	5% to 95%
Altitude, operating and nonoperating	Sea level to 10,000 ft. (3050 m)
Switching Components
Backplane	3.6 Gbps
Microprocessor	Supervisor Engine II: 25-MHz 68EC040 for the NMP¹ Supervisor Engine III, Supervisor Engine III F: 150-MHz IDT R4700 RISC Supervisor Engines II G and III G: 37.5-MHz MCF5102 for the NMP
Memory
Supervisor Engine II Supervisor Engine II G Supervisor Engine III Supervisor Engine III F Supervisor Engine III G	DRAM²: 16 MB; Flash (onboard)-4 MB; NVRAM³-256 KB DRAM: 32 MB; Flash (onboard)-8 MB; NVRAM-256 KB DRAM: 32 MB; Flash (onboard)-4 MB; Flash PC Card-16 MB or 20 MB; NVRAM-512 KB DRAM: 32 MB; Flash (onboard)-4 MB; NVRAM-512 KB DRAM: 32 MB; Flash (onboard)-8 MB; NVRAM-256 KB
Physical Characteristics
Dimensions (H x W x D)	20 x 17.25 x 18.4 in. (50.8 x 43.1 x 46.0 cm) Chassis depth including cable guide is 21.64 in. (55.0 cm)
Weight	Chassis only: 55 lb (24.9 kg) Chassis fully configured with 1 supervisor engine, 4 switching modules, and 2 power supplies: 135 lb (61.2 kg)
Shock and Vibration
Shock	42 inches per second (1.07 meters per second)
Vibration	0.35 g from 3 to 500 Hz
Power
Power supply output capacity	805W maximum (AC-input or DC-input power supplies)
System power dissipation (AC and DC supplies)	805W maximum configuration, 600W typical with maximum configuration
System heat dissipation (AC supply)	1150W (3920 Btus⁴/hr) maximum
System heat dissipation (DC supply)	1150W (3920 Btus/hr) maximum
AC-input voltage	100 to 240 VAC wide input with power factor corrector
DC-input voltage Typical range (U.S. and Canada) Typical range (International)	-48 VDC to -60 VDC continuous -48 VDC (nominal) -54 VDC (high) -42 VDC (low) -60 VDC (nominal) -72 VDC (high) -52 VDC (low)
AC frequency	50 to 60 Hz
DC power-cable wire gauge	10 AWG 90ºC copper conductors
AC-input current	12-6A (805W power supply) or 16-7A (1100W power supply)
DC-input current	25.0A (1100W power supply) or 40.0A (1200W power supply)
Power supply output	+5.15V @ 140A, +12V @ 4A, +24V @ 1.5A
Airflow	200 lfm⁵ through system fan assembly
Agency Approvals Safety EMI ⁶	UL⁷ 1950, CSA⁸-C22.2 No. 950, EN⁹60950, and IEC¹⁰ 950, TS¹¹ 001, AS/NZS¹² 3260 CE¹³ Marking, EN 60825, IEC 60825, 21CFR1040 FCC¹⁴ Part 15, Class A (CFR¹⁵ 47) (USA), ICES¹⁶-003 Class A (Canada), EN55022 Class A (Europe), CISPR22 Class A (International), AS/NZS 3548 Class A (Australia), and VCCI Class A (Japan) with UTP¹⁷ EN55022 Class B (Europe), CISPR22 Class B (International), AS/NZS 3548 Class B, and VCCI¹⁸ Class B (Japan) with FTP¹⁹ cables

Catalyst 550 0 Switch

Catalyst 5500 switch specifications are provided in Table A-4.

Table A-4: Catalyst 5500 Switch Specifications

Item Specification

Environmental

Temperature, ambient operating

32°F (0°C) to 104°F (40°C)

Temperature, ambient nonoperating and storage

-40°F (-40°C) to 158°F (70°C)

Humidity (RH), ambient (noncondensing) operating

10% to 90%

Humidity (RH), ambient (noncondensing) nonoperating and storage

5% to 95%

Altitude, operating and nonoperating

Sea level to 10,000 ft (3050 m)

Vibration, operating

5 to 200 Hz, 0.5 g (1 oct/min)

Vibration, nonoperating

5 to 200 Hz, 1 g (1 oct/min)
200 to 500 Hz, 2 g (1 oct/min)

Switching Components

Backplane

3.6 Gbps
5-Gbps cell-based switching fabric for ATM

Switching Components (continued)

Microprocessor

Supervisor Engine II: 25-MHz 68EC040 for the NMP¹

Supervisor Engine III, Supervisor Engine III F: 150-MHz IDT R4700 RISC

Supervisor Engines II G and III G: 37.5-MHz MCF5102 for the NMP

Memory

Supervisor Engine II

Supervisor Engine II G

Supervisor Engine III

Supervisor Engine III F

Supervisor Engine III G

DRAM²: 16 MB; Flash (onboard)-4 MB; NVRAM³-256 KB

DRAM: 32 MB; Flash (onboard)-8 MB;
NVRAM-256 KB

DRAM: 32 MB; Flash (onboard)-4 MB; Flash PC Card-16 MB or 20 MB; NVRAM-512 KB

DRAM: 32 MB; Flash (onboard)-4 MB;
NVRAM-512 KB

DRAM: 32 MB; Flash (onboard)-8 MB;
NVRAM-256 KB

Physical Characteristics

Dimensions (H x W x D)

25 x 17.25 x 18.4 in. (62.5 x 43.1 x 46.0 cm)
Depth including cable guide: 21.64 in. (55.0 cm)

Weight

Chassis only: 61 lb (22.75 kg)
Full configuration: 13 switching modules and 2 power supplies, 176 lb (65.65 kg)

Shock and Vibration

Shock

21 inches per second (0.53 meters per second)

Vibration

0.35 g from 3 to 500 Hz

Power

Power supply output capacity

1100W maximum (AC-input or DC-input power supplies)

System power dissipation

1100W maximum configuration, 750W typical with maximum configuration

System heat dissipation

1571W (5360 Btus⁴/hr)

AC-input voltage

100 to 240 VAC wide input with power factor corrector

DC-input voltage
Typical range (U.S. and Canada)
Typical range (International)

-48 VDC to -60 VDC continuous
-48 VDC (nominal) -54 VDC (high) -42 VDC (low)
-60 VDC (nominal) -72 VDC (high) -52 VDC (low)

AC frequency

50 to 60 Hz

DC power-cable wire gauge

8 AWG 90ºC copper conductors

AC-input current

16-7A with full configuration (maximum of 1.8 kVA)

DC-input current

35A or 40A

Power supply output

200A @ +5.15V, 6 A @ +12V, 2A @ +24V

Airflow
200 lfm⁵ through system fan assembly

Agency Approvals
Safety

EMI ⁶

UL⁷ 1950, CSA⁸-C22.2 No. 950, EN⁹60950, and IEC¹⁰ 950, TS¹¹ 001, AS/NZS¹² 3260 CE¹³ Marking,
EN 60825, IEC 60825, 21CFR1040

FCC¹⁴ Part 15, Class A (CFR¹⁵ 47) (USA), ICES¹⁶-003 Class A (Canada), EN55022 Class A (Europe), CISPR22 Class A (International), AS/NZS 3548 Class A (Australia), and VCCI Class A (Japan) with UTP¹⁷

EN55022 Class B (Europe), CISPR22 Class B (International), AS/NZS 3548 Class B, and VCCI¹⁸ Class B (Japan) with FTP¹⁹ cables

¹NMP = network management processor
²DRAM = dynamic random-access memory
³NVRAM = nonvolatile random-access memory
⁴Btus = British thermal units
⁵lfm = linear feet per minute
⁶EMI = electromagnetic interference
⁷UL = Underwriters Laboratory
⁸CSA = Canadian Standards Association
⁹EN = European Norm
¹⁰IEC = International Electrotechnical Commission
¹¹TS = Technical Specification
¹²AS/NZS = Standards Australia/Standards New Zealand
¹³CE = European Compliance
¹⁴FCC = Federal Communications Commission
¹⁵CFR = Code of Federal Regulations
¹⁶ICES = International Commerce Exchange Systems
¹⁷UTP = unshielded twisted-pair
¹⁸VCCI = Voluntary Control Council for Information Technology Equipment
¹⁹FTP = foil twisted-pair

Table of Contents

Specifications

Specifications

Catalyst 5002 Switch

Catalyst 5000 and Catalyst 5505 Switches

Catalyst 5509 Switch

Catalyst 5500 Switch

Catalyst 50 02 Switch

Catalyst 500 0 and Catalyst 5505 Switches

Catalyst 550 9 Switch

Catalyst 550 0 Switch