Repacking a Switch

If you need to return or move the Catalyst 4003 or 4006 switch, follow these steps to repack the switch using the original packaging material:

Step 1 Slide the padding foam over the Catalyst 4003 or 4006 switch. (See Figure B-1.)

Step 2 Place the accessory kit on the top packing material.

Step 3 Place the outside carton over the entire package.

Step 4 Fold the outside carton down over the top of the accessory boxes and seal with packing tape.

Note The Catalyst 4003 switch is shown in Figure B-1. The repackaging procedure for the Catalyst 4006 switch is the same.

Figure B-1: Catalyst 4003 and 4006 Switch Packing Material

Table of Contents