Specifications

This appendix provides cable and technical specifications for the Catalyst 4003 and 4006 switches.

Supervisor Engine Ethernet Management Port

The Catalyst 4003 switch has a 10BaseT Ethernet management port. The Catalyst 4006 switch has a 10/100BaseT Ethernet management port. Both the Catalyst 4003 and 4006 Ethernet management ports have DTE RJ-45 receptacles and a STATUS LED. Table A-1 lists the Ethernet management port pinouts for the Catalyst 4003 and 4006 switches.

Table A-1: Catalyst 4003 and 4006 Supervisor Engine Management Port Pinouts

Pin Signal Direction Description

1

RXDP

input

receive data

2

RXDN

input

receive data

3

TXDP

output

transmit data

4

unused

5

unused

6

TXDN

output

transmit data

7

unused

8

unused

Pin	Signal	Direction	Description
1	RXDP	input	receive data
2	RXDN	input	receive data
3	TXDP	output	transmit data
4	unused
5	unused
6	TXDN	output	transmit data
7	unused
8	unused

Catalyst 4003 Supervisor Engine Console Port

The console port use a DB-25 connector and supports DTR, DSR, CTS, and RTS handshake signals. Table A-2 lists the console port pinouts for the Catalyst 4003 switch.

Table A-2: Catalyst 4003 Console Port Pinouts

Pin Signal Direction Description

1

Ground

2

RXD

input

receive data

3

TXD

output

transmit data

4

CTS

input

clear to send

5

RTS

output

request to send

7

Ground

8

DTR

output

data terminal ready

20

DSR

input

data set ready

Pin	Signal	Direction	Description
1	Ground
2	RXD	input	receive data
3	TXD	output	transmit data
4	CTS	input	clear to send
5	RTS	output	request to send
7	Ground
8	DTR	output	data terminal ready
20	DSR	input	data set ready

Catalyst 4006 Supervisor Engine Console Port

The console port uses an RJ-45 connector and supports DTR and DSR handshake signals. Table A-3 lists the console port pinouts for the Catalyst 4006 switch.

Table A-3: Catalyst 4006 Console Port Pinouts

Pin Signal Direction Description

1

RTS

output

request to send

2

DTR

output

data terminal ready

3

TXD

output

transmit data

4

Ground

5

Ground

6

RXD

input

receive data

7

DSR

input

data set ready

8

CTS

input

clear to send

Pin	Signal	Direction	Description
1	RTS	output	request to send
2	DTR	output	data terminal ready
3	TXD	output	transmit data
4	Ground
5	Ground
6	RXD	input	receive data
7	DSR	input	data set ready
8	CTS	input	clear to send

Catalyst 4003 Switch Specifications

Table A-4 lists the Catalyst 4003 switch specifications.

Table A-4: Catalyst 4003 Switch Specifications

Item Specification

Environmental

Temperature
ambient operating

32°F (0°C) to 104°F (40°C)

Temperature
ambient nonoperating and storage

-40 to 167°F (-40 to 75°C)

Humidity (RH), ambient (noncondensing) operating

10% to 90%

Humidity (RH), ambient (noncondensing) nonoperating and storage

5% to 95%

Altitude
operating and nonoperating

-60 to 4000 meters

Switching Components

Backplane

12-Gbps full duplex

Microprocessor

Supervisor engine: 150-MHz R5000 RISC

Memory

Supervisor engine

SDRAM: 32 MB on board, 32 MB DIMM (1Mx4x72, 168-pin, 100 MHz, non-registered, 3.3V), 16 MB Flash, 512 KB NVRAM

Physical Characteristics

Dimensions (H x W x D)

10.50 x 17.25 x 11.81 in. (26.6 x 43.7 x 30 cm)

Weight

Minimum weight: 27.5 lb (12 kg)
Maximum weight: 40 lb (18 kg)

AC Power

Power supply output capacity

400W maximum

Power supply output current

+12V @ 33.3A (maximum)

AC-input voltage

100 to 240 VAC

AC frequency

50 to 60 Hz

AC-input current

6.0A maximum @ 100 VAC 60 Hz
3.0A maximum @ 200 VAC 50 Hz

KVA rating

0.58 KVA

Heat Dissipation

530W maximum (1800 BTUs per hour)

DC Power

Power supply output capacity

400W maximum

Power supply output current

+12V @ 33.3A (maximum)

DC-input voltage

-40.5 to -72 VDC

DC-input current

11.0A maximum @ -48 VDC
8.8A maximum @ -60 VDC

KVA rating

0.53 KVA

Heat dissipation

530W maximum (1800 BTUs per hour)

Input wiring

AWG 12 (recommended), AWG 10 (maximum)

Airflow

Switch

right to left

Power supply

front to back

Agency Approvals

Safety

EMC¹

UL² 1950, CSA³-C22.2 No. 950, EN⁴60950,
and IEC⁵ 950, CE⁶ Marking, 21CFR 1040, EN 60825

FCC⁷ Part 15, Class A (CFR⁸ 47) (USA), ICES⁹-003 Class A (Canada), EN55022 Class A (Europe), CISPR22 Class A (International), AS/NZS 3548 Class A (Australia), and VCCI Class A (Japan) with UTP¹⁰

EN55022 Class B (Europe), CISPR22 Class B (International), AS/NZS 3548 Class B, and VCCI¹¹ Class B (Japan) with FTP¹² cables

¹EMC = electromagnetic compatibility
²UL = Underwriters Laboratory
³CSA = Canadian Standards Association
⁴EN = European Norm
⁵IEC = International Electrotechnical Commission
⁶CE = European Compliance
⁷FCC = Federal Communications Commission
⁸CFR = Code of Federal Regulations
⁹ICES = Interference-Causing Equipment Standard
¹⁰UTP = unshielded twisted-pair
¹¹VCCI = Voluntary Control Council for Information Technology Equipment
¹²FTP = foil twisted-pair

Item	Specification
Environmental
Temperature ambient operating	32°F (0°C) to 104°F (40°C)
Temperature ambient nonoperating and storage	-40 to 167°F (-40 to 75°C)
Humidity (RH), ambient (noncondensing) operating	10% to 90%
Humidity (RH), ambient (noncondensing) nonoperating and storage	5% to 95%
Altitude operating and nonoperating	-60 to 4000 meters
Switching Components
Backplane	12-Gbps full duplex
Microprocessor	Supervisor engine: 150-MHz R5000 RISC
Memory
Supervisor engine	SDRAM: 32 MB on board, 32 MB DIMM (1Mx4x72, 168-pin, 100 MHz, non-registered, 3.3V), 16 MB Flash, 512 KB NVRAM
Physical Characteristics
Dimensions (H x W x D)	10.50 x 17.25 x 11.81 in. (26.6 x 43.7 x 30 cm)
Weight	Minimum weight: 27.5 lb (12 kg) Maximum weight: 40 lb (18 kg)
AC Power
Power supply output capacity	400W maximum
Power supply output current	+12V @ 33.3A (maximum)
AC-input voltage	100 to 240 VAC
AC frequency	50 to 60 Hz
AC-input current	6.0A maximum @ 100 VAC 60 Hz 3.0A maximum @ 200 VAC 50 Hz
KVA rating	0.58 KVA
Heat Dissipation	530W maximum (1800 BTUs per hour)
DC Power
Power supply output capacity	400W maximum
Power supply output current	+12V @ 33.3A (maximum)
DC-input voltage	-40.5 to -72 VDC
DC-input current	11.0A maximum @ -48 VDC 8.8A maximum @ -60 VDC
KVA rating	0.53 KVA
Heat dissipation	530W maximum (1800 BTUs per hour)
Input wiring	AWG 12 (recommended), AWG 10 (maximum)
Airflow
Switch	right to left
Power supply	front to back
Agency Approvals
Safety EMC¹	UL² 1950, CSA³-C22.2 No. 950, EN⁴60950, and IEC⁵ 950, CE⁶ Marking, 21CFR 1040, EN 60825 FCC⁷ Part 15, Class A (CFR⁸ 47) (USA), ICES⁹-003 Class A (Canada), EN55022 Class A (Europe), CISPR22 Class A (International), AS/NZS 3548 Class A (Australia), and VCCI Class A (Japan) with UTP¹⁰ EN55022 Class B (Europe), CISPR22 Class B (International), AS/NZS 3548 Class B, and VCCI¹¹ Class B (Japan) with FTP¹² cables

Catalyst 4006 Switch Specifications

Table A-5 lists the Catalyst 4006 switch specifications.

Table A-5: Catalyst 4006 Switch Specifications

Item Specification

Environmental

Temperature
ambient operating

32°F (0°C) to 104°F (40°C)

Temperature
ambient nonoperating and storage

-40 to 167°F (-40 to 75°C)

Humidity (RH), ambient (noncondensing) operating

10% to 90%

Humidity (RH), ambient (noncondensing) nonoperating and storage

5% to 95%

Altitude
operating
nonoperating

-500 to 10,000 ft. (-150 to 3050 meters)
-1000 to 30,000 ft. (-300 to 9150 meters)

Switching Components

Backplane

32-Gbps full duplex

Microprocessor

Supervisor engine: 150-MHz R5000 RISC

Memory

Supervisor engine

SDRAM: 64-MB DIMM (2Mx4x72, 168-pin, 100 MHz, non-registered, 3.3V), 16 MB Flash, 1 MB NVRAM

Physical Characteristics

Dimensions (H x W x D)

15.75 x 17.25 x 11.81 in. (40 x 43.7 x 30 cm)

Weight

Minimum weight: 31 lb (14.0 kg)
Maximum weight: 61 lb (27.7 kg)

AC Power

Power supply output capacity

400W maximum per power supply; 725W maximum with two power supplies

Power supply output current

+12V @ 33.3A (maximum)

AC-input voltage

100 to 240 VAC

AC frequency

50 to 60 Hz

AC-input current

6.0A maximum @ 100 VAC 60 Hz per power supply
10.0A maximum @ 100 VAC 60 Hz with two power supplies
3.0A maximum @ 200 VAC 50 Hz per power supply
5.0A maximum @ 200 VAC 50 Hz with two power supplies

KVA rating

0.58 KVA

Heat Dissipation

725W maximum (3090 BTUs per hour)

DC Power

Power supply output capacity

400W maximum

Power supply output current

+12V @ 33.3A (maximum)

DC-input voltage

-40.5 to -72 VDC

DC-input current

11.0A maximum @ -48 VDC
8.8A maximum @ -60 VDC

KVA rating

0.53 KVA

Heat dissipation

530W maximum (1800 BTUs per hour)

Input wiring

AWG 12 (recommended), AWG 10 (maximum)

Airflow

Switch

right to left

Power supply

front to back

Agency Approvals

Safety

EMC¹

UL² 1950, CSA³-C22.2 No. 950, EN⁴60950,
and IEC⁵ 950, CE⁶ Marking, 21CFR 1040, EN 60825

FCC⁷ Part 15, Class A (CFR⁸ 47) (USA), ICES⁹-003 Class A (Canada), EN55022 Class A (Europe), CISPR22 Class A (International), AS/NZS 3548 Class A (Australia), and VCCI Class A (Japan) with UTP¹⁰

EN55022 Class B (Europe), CISPR22 Class B (International), AS/NZS 3548 Class B, and VCCI¹¹ Class B (Japan) with FTP¹² cables

¹EMC = electromagnetic compatibility
²UL = Underwriters Laboratory
³CSA = Canadian Standards Association
⁴EN = European Norm
⁵IEC = International Electrotechnical Commission
⁶CE = European Compliance
⁷FCC = Federal Communications Commission
⁸CFR = Code of Federal Regulations
⁹ICES = Interference-Causing Equipment Standard
¹⁰UTP = unshielded twisted-pair
¹¹VCCI = Voluntary Control Council for Information Technology Equipment
¹²FTP = foil twisted-pair

Item	Specification
Environmental
Temperature ambient operating	32°F (0°C) to 104°F (40°C)
Temperature ambient nonoperating and storage	-40 to 167°F (-40 to 75°C)
Humidity (RH), ambient (noncondensing) operating	10% to 90%
Humidity (RH), ambient (noncondensing) nonoperating and storage	5% to 95%
Altitude operating nonoperating	-500 to 10,000 ft. (-150 to 3050 meters) -1000 to 30,000 ft. (-300 to 9150 meters)
Switching Components
Backplane	32-Gbps full duplex
Microprocessor	Supervisor engine: 150-MHz R5000 RISC
Memory
Supervisor engine	SDRAM: 64-MB DIMM (2Mx4x72, 168-pin, 100 MHz, non-registered, 3.3V), 16 MB Flash, 1 MB NVRAM
Physical Characteristics
Dimensions (H x W x D)	15.75 x 17.25 x 11.81 in. (40 x 43.7 x 30 cm)
Weight	Minimum weight: 31 lb (14.0 kg) Maximum weight: 61 lb (27.7 kg)
AC Power
Power supply output capacity	400W maximum per power supply; 725W maximum with two power supplies
Power supply output current	+12V @ 33.3A (maximum)
AC-input voltage	100 to 240 VAC
AC frequency	50 to 60 Hz
AC-input current	6.0A maximum @ 100 VAC 60 Hz per power supply 10.0A maximum @ 100 VAC 60 Hz with two power supplies 3.0A maximum @ 200 VAC 50 Hz per power supply 5.0A maximum @ 200 VAC 50 Hz with two power supplies
KVA rating	0.58 KVA
Heat Dissipation	725W maximum (3090 BTUs per hour)
DC Power
Power supply output capacity	400W maximum
Power supply output current	+12V @ 33.3A (maximum)
DC-input voltage	-40.5 to -72 VDC
DC-input current	11.0A maximum @ -48 VDC 8.8A maximum @ -60 VDC
KVA rating	0.53 KVA
Heat dissipation	530W maximum (1800 BTUs per hour)
Input wiring	AWG 12 (recommended), AWG 10 (maximum)
Airflow
Switch	right to left
Power supply	front to back
Agency Approvals
Safety EMC¹	UL² 1950, CSA³-C22.2 No. 950, EN⁴60950, and IEC⁵ 950, CE⁶ Marking, 21CFR 1040, EN 60825 FCC⁷ Part 15, Class A (CFR⁸ 47) (USA), ICES⁹-003 Class A (Canada), EN55022 Class A (Europe), CISPR22 Class A (International), AS/NZS 3548 Class A (Australia), and VCCI Class A (Japan) with UTP¹⁰ EN55022 Class B (Europe), CISPR22 Class B (International), AS/NZS 3548 Class B, and VCCI¹¹ Class B (Japan) with FTP¹² cables

Switching Module Specifications

Table A-6 provides specifications for the Catalyst 4003 and 4006 switching modules.

Table A-6: Switching Module Specifications

Item Specification

Physical Characteristics

Dimensions (H x W x D)

1.75 x 14.4 x 10.5 in. (44 x 366 x 267 mm)

Weight

4.8 lb. (2.2 kg)

Environmental

Operating temperature

32 to 104ºF (0 to 40ºC)

Nonoperating temperature

-40 to 167ºF (-40 to 75ºC)

Humidity

10 to 90 percent, noncondensing

Connectors

WS-X4124-FX-MT

24-ports; 24 MT-RJ connectors; MMF

WS-X4148-RJ

48-ports; 48 RJ-45 connectors; Category 5 UTP¹

WS-X4148-RJ21

48-ports; 4 RJ-21 connectors; Category 5 UTP

Connectors

WS-X4232-GB-RJ

32-ports; 32 RJ-45 connectors; Category 5 UTP
2-ports; 2 GBICs, SC-type connectors; MMF or SMF

WS-X4232-L3

32-ports; 32 RJ-45 connectors; Category 5 UTP
2-ports; 2 GBICs, SC-type connectors; MMF or SMF
Console and 10Base-T port; 2 RJ-45 connectors; Category 5 UTP

WS-X4232-RJ-XX

32-ports; 32 RJ-45 connectors; Category 5 UTP, uplink module

WS-X4306-GB

6-ports; 6 GBICs, SC-type connectors; MMF or SMF

WS-X4412-2GB-T

12-ports; 12 RJ-45 connectors; Category 5 UTP
2-ports; 2 GBICs, SC-type connectors; MMF or SMF

WS-X4418-GB

18-ports; 18 GBICs, SC-type connectors; MMF or SMF

¹unshielded twisted-pair

Item	Specification
Physical Characteristics
Dimensions (H x W x D)	1.75 x 14.4 x 10.5 in. (44 x 366 x 267 mm)
Weight	4.8 lb. (2.2 kg)
Environmental
Operating temperature	32 to 104ºF (0 to 40ºC)
Nonoperating temperature	-40 to 167ºF (-40 to 75ºC)
Humidity	10 to 90 percent, noncondensing
Connectors
WS-X4124-FX-MT	24-ports; 24 MT-RJ connectors; MMF
WS-X4148-RJ	48-ports; 48 RJ-45 connectors; Category 5 UTP¹
WS-X4148-RJ21	48-ports; 4 RJ-21 connectors; Category 5 UTP
Connectors
WS-X4232-GB-RJ	32-ports; 32 RJ-45 connectors; Category 5 UTP 2-ports; 2 GBICs, SC-type connectors; MMF or SMF
WS-X4232-L3	32-ports; 32 RJ-45 connectors; Category 5 UTP 2-ports; 2 GBICs, SC-type connectors; MMF or SMF Console and 10Base-T port; 2 RJ-45 connectors; Category 5 UTP
WS-X4232-RJ-XX	32-ports; 32 RJ-45 connectors; Category 5 UTP, uplink module
WS-X4306-GB	6-ports; 6 GBICs, SC-type connectors; MMF or SMF
WS-X4412-2GB-T	12-ports; 12 RJ-45 connectors; Category 5 UTP 2-ports; 2 GBICs, SC-type connectors; MMF or SMF
WS-X4418-GB	18-ports; 18 GBICs, SC-type connectors; MMF or SMF

Table of Contents

Specifications

Specifications

Supervisor Engine Ethernet Management Port

Catalyst 4003 Supervisor Engine Console Port

Catalyst 4006 Supervisor Engine Console Port

Catalyst 4003 Switch Specifications

Catalyst 4006 Switch Specifications

Switching Module Specifications