Repacking a Switch

To repack the switch using the original packaging material, follow these steps:

Step 1 Slide the padding foam over the Catalyst 2948G or 2980G switch. (See Figure B-1.)

Note The Catalyst 2948G switch is shown in Figure B-1. The repackaging procedure for the Catalyst 2980G switch is identical.

Step 2 Place the accessory kit on the top packing material.

Step 3 Place the outside carton over the entire package.

Step 4 Fold the outside carton down over the top of the accessory boxes and seal with packing tape.

Figure B-1: Catalyst 2948G and 2980G Switch Packing Material

Table of Contents