cc/td/doc/product/l3sw/8540/rel_12_0/w5_6f
hometocprevnextglossaryfeedbacksearchhelp
PDF

Table of Contents

Cisco IOS Commands Not Supported on the Catalyst 8500

Cisco IOS Commands Not Supported on the Catalyst 8500

This appendix lists the Cisco IOS commands that the Catalyst 8500 campus switch router does not support. In general, commands are not supported on this platform because they hamper performance or they do not fit into the architectural requirements of this product.


Note Access
lists are supported for routing protocol distribution lists, route-maps, and access lists for control traffic or traffic that is forwarded to the route processor. The Catalyst 8500 does not support access lists for user traffic forwarded by the Ethernet line modules.


Table A-1: Commands Not Supported

access-class

access-list (extended)--not supported for data only

access-list (standard)--not supported for data only

clear access-list counters

clear ip accounting

clear ip nat translation

clear ip nhrp

deny

dynamic

encap sde <said>

ip access-group

ip access-list

ip accounting

ip accounting-list

ip accounting-threshold

ip accounting-transits

ip cache-invalidate-delay

ip flow-export

ip gdp gdp

ip gdp igrp

ip gdp irdp

ip gdp rip

ip mtu

ip nat

ip nat inside destination

ip nat inside source

ip nat outside source

ip route cache

ip security add

ip security aeso

ip security dedicated

ip security eso-info

ip security eso-max

ip security eso-min

ip security extended-allowed

ip security first

ip security ignore-authorities

ip security implicit-labelling

ip security multilevel

ip security reserved-allowed

ip security strip

ip tcp chunk-size

ip tcp compression-connections

ip tcp header-compression

ip tcp path-mtu-discovery

ip unnumbered

permit--not supported for data only

show access-lists

show ip access-lists

show ip accounting

show ip cache

show ip cache flow

show ip nat statistics

show ip nat translations

show ip nhrp

show ip nhrp traffic

show ip tcp header-compression

show sse summary

transmit-interface

tunnel mode


Table A-2: Novell IPX Commands Not Supported

access-list (extended)--not supported for data only

access-list (NetWare Link Service Protocol (NLSP) route aggregation summarization)

access-list (standard)

area-address

clear ipx accounting

clear ipx nhrp

clear ipx nlsp neighbors

deny (extended)

deny (NLSP route aggregation summarization)

deny (standard)

ipx access-group

ipx access-list

ipx accounting

ipx accounting-list

ipx accounting-threshold

ipx accounting-transits

ipx ipxwan

ipx ipxwan error

ipx ipxwan static

ipx link-delay

ipx linkup-request

ipx nhrp authentication

ipxnhrp holdtime

ipx nhrp interest

ipx nhrp map

ipx nhrp max-send

ipx nhrp network-id

ipx nhrp nhs

ipx nhrp record

ipx nhrp responder

ipx nhrp use

ipx nlsp csnp-interval

ipx nlsp enable

ipx nlsp hello-interval

ipx nlsp hello-multiplier

ipx nlsp lsp-interval

ipx nlsp metric

ipx nlsp multicast

ipx nlsp priority

ipx nlsp retransmit-interval

ipx nlsp rip

ipx nlsp sap

ipx spx-idle-time

ipx spx-spoof

ipx watchdog-spoof

log-adjacency-changes

lsp-gen-interval

lsp-mtu

lsp-refresh-interval

max-ls-lifetime

permit (extended)

permit (NLSP route aggregation summarization)

route-aggregation

show ipx access-list

show ipx accounting

show ipx nhrp

show ipx nhrp traffic

show ipx nlsp database

show ipx nlsp neighbors

show ipx nlsp spf-log

show ipx spx-spoof

spf-interval


Table A-3: IP Multicast Commands Not Supported

bridge cmf

clear rtp header compression

ip mroute-cache

ip multicast boundary

ip multicast cache-headers

ip multicast rate limit

ip pim spt-threshold

ip rtp compression-connections

ip rtp header-compression

show ip mcache

show ip mpacket

show ip rtp header-compression


Table A-4: Bridge Commands Not Supported

access-list

bridge acquire

bridge address

bridge circuit-group pause

bridge circuit-group source-based

bridge cmf

bridge crb

bridge domain

bridge-group cbus-bridging

bridge-group circuit-group

bridge-group input-lat-service-permit

bridge-group input-lsap-list

bridge-group input-pattern-list

bridge-group input-type-list

bridge-group lat-compression

bridge-group output-address-list

bridge-group output-lat-service-deny

bridge-group output-lat-service-permit

bridge-group output-lsap-list

bridge-group output-pattern-list

bridge-group output-type-list

bridge-group sse

bridge lat-service-filtering

bridge multicast-source

clear sse

encapsulation sse

encapsulation sde

ethernet-transit-oui

frame-relay map bridge broadcast

show bridge multicast

show interfaces crb

show sse summary

x25 map bridge


Table A-5:

rmon native

standby MAC refresh

Miscellaneous Commands Not Supported


hometocprevnextglossaryfeedbacksearchhelp
Posted: Wed Aug 2 14:39:35 PDT 2000
Copyright 1989-2000©Cisco Systems Inc.