INDEX

Numerics

INDEX

Numerics

: 10/100 UTP line module 4-4
: 100BaseFX line module 4-4

A

: aal5 buffers command 4-26
: access lists A-1
: aggregate capacity, full duplex 1-5
: autonegotiation 4-6

B

backing up system image 2-10, 3-10

boot command options C-4

boot commands C-4

boot system flash command 2-8, 2-9, 3-9

bootable system images, copying 2-8, 3-9

bootflash, disable booting from 2-9, 3-9

Break key, controlling C-5

bridge groups

: maximum number of 4-9
: routing 4-19

bridge irb 4-21

bridge priority command 4-18

bridge protocol command 4-18

bridge-group command 4-8, 4-18

bridge-group virtual interface

: See BVI.

bridging

: about 4-17
: configuration tasks 4-17
: feature list 1-7
: initial configuration 4-18

BVI 4-19

: configuring 4-21
: displaying information about 4-21
: routing enabled on 4-20

C

Catalyst 8510

: integration with Catalyst 5500 1-2

cd command 2-6, 3-6

cd slot command 2-10, 3-10

channel group 1-5

channel-group command 4-23

chassis

: Catalyst 8510 1-2
: Catalyst 8540 1-3

Cisco Discovery Protocol 1-8

Cisco Express Forwarding 1-11

Cisco IOS

: bridging functionality 4-17
: configuration mode 4-2
: console configuration mode 1-13
: context-sensitive help 1-13
: EXEC 4-2
: global configuration mode 1-13
: interface configuration mode 1-13
: interface marked "up" 4-12
: levels of access 4-2
: modes of operation 1-12
: privileged EXEC mode 1-13
: routing protocol configuration 4-11
: running configuration, displaying 4-2
: software basics 1-12
: user EXEC mode 1-13

clear bridge command 4-19

clear vlan 4-9

clear vlan statistics command 4-19

clock set command 2-5, 3-6

command modes 1-12

commands

: aal5 buffers 4-26
: boot C-4
: boot system flash 2-8, 2-9, 3-9
: bridge irb 4-21
: bridge priority 4-18
: bridge protocol 4-18
: bridge-group 4-8, 4-18
: cd 2-6, 3-6
: cd slot 2-10, 3-10
: channel-group 4-23
: clear bridge 4-19
: clear vlan 4-9
: clear vlan statistics 4-19
: clock set 2-5, 3-6
: config-reg 0x2102 2-9, 3-10
: config-register C-4
: copy 2-9, 3-9
: copy flash tftp 2-10, 3-11
: copy running-config startup-config 4-26
: debug ip rip 4-12
: debug ipx routing activity 4-15
: debug ipx sap 4-15
: debug lss ipmcast 4-17
: debug lss ipucast 4-12
: debug vlan packet 4-9
: delete 2-6, 3-7
: dir 2-6, 3-7
: enable secret 2-5, 3-5
: enable-password 2-5, 3-5
: encap isl 4-8
: hostname 2-5, 3-6
: interface bvi 4-21
: interface port-channel 4-22, 4-23, 4-25
: ip address 4-11
: ip multicast-routing 4-16
: ip pim 4-16
: ipx maximum-paths 4-14
: ipx network 4-14
: ipx routing 4-14
: line vty 2-3, 3-3
: network 4-11
: network area 4-12
: no boot system 2-9, 3-9
: no channel-group 4-24
: not supported A-1
: pwd 2-6, 3-6
: qos mapping precedence 5-3
: reload 2-3, 3-4
: router eigrp 4-11
: router igrp 4-11
: router ospf 4-11
: router rip 4-11
: show arp 4-6
: show bridge 4-19
: show bridge group 4-19
: show bridge vlan 4-19
: show controller 4-6
: show epc cam int 4-17
: show epc if-entry 4-16
: show epc ipmcast 4-17
: show epc patricia int 4-17
: show hardware 2-2, 3-2, 4-3
: show interface 4-6
: show interface ethernet0 3-3
: show interfaces 4-3
: show interfaces bvi 4-21
: show interfaces irb 4-21
: show interfaces port-channel 4-26
: show ip interfaces 4-12
: show ip mroute 4-16
: show ip protocol 4-12
: show ip route 4-12
: show ipx cache 4-14
: show ipx interfaces 4-14
: show ipx route 4-14
: show ipx servers 4-14
: show ipx traffic 4-14
: show qos mapping 5-4
: show qos switching 5-4
: show running-config 4-26
: show span 4-19
: show vlan 4-9
: show vlans 4-19
: speed auto 4-6
: squeeze 2-7, 3-7

config-reg 0x2102 command 2-9, 3-10

config-register command C-4

configuration

: 10BaseT and 100BaseT 4-6
: autonegotiation 4-6
: BOOTP server 2-3, 3-4
: bridging 4-17
: BVI 4-21
: current time 2-5, 3-6
: direct console connection 2-1, 3-2
: examples B-1
: Fast EtherChannel 4-22
: Flash memory cards 2-6, 3-6
: gigabit Ethernet interface 4-7
: host name 2-5, 3-6
: information required for 4-1
: integrated routing and bridging (IRB) 4-19
: interface configuration, overview 4-3
: IP multicast 4-15
: IP routing protocols 4-9
: IPX 4-12
: ISL over FEC 4-25
: port speed 4-6
: saving changes 2-11, 3-12, 4-26
: software configuration register C-2
: VLANs 4-7

configuration mode 4-2

configuration register

: See software configuration register

console configuration mode 1-13

console connection, terminal emulation for 2-1, 3-2

context-sensitive help 1-13

control layer, functions of 1-5

copy command (Flash memory) 2-9, 3-9

copy flash tftp command 2-10, 3-11

copy running-config startup-config 4-26

copying

: system image from slot to slot 2-9, 3-9
: system image to Flash memory card 2-11, 3-11
: system image to TFTP server 2-10, 3-10

D

: debug ip rip 4-12
: debug ipx routing activity 4-15
: debug ipx sap 4-15
: debug lss ipmcast 4-17
: debug lss ipucast 4-12
: debug vlan packet 4-9
: delete command 2-6, 3-7
: dense mode, PIM 4-15
: dir command 2-6, 3-7
: distributed hardware forwarding 1-5

E

EIGRP 4-10

: IPX route information redistributed 4-10

enable password 2-4, 3-5

enable secret command 2-5, 3-5

enable secret password 2-4, 3-5

enable-password command 2-5, 3-5

encap isl command 4-8

Ethernet

: 10BaseT and 100BaseT configuration 4-6
: configuration tasks 4-5
: IP address and BOOTP configuration file 2-3, 3-4

Ethernet line module

: 10/100 UTP 4-4
: 100BaseFX 4-4
: gigabit transmission 1-4
: port on 4-4

examples

: BOOTP configuration file 2-4, 3-4
: Flash memory card configuration 2-6, 3-6
: squeeze command 2-7, 3-7

external bridge 4-12

F

Fast EtherChannel

: See FEC.

Fast Ethernet

: assigning interfaces to FEC 4-23
: configuration tasks 4-5
: Fast EtherChannel and 4-22
: speeds supported 4-6
: subinterface configuration 4-8

Fast Ethernet line modules 4-5

FEC 4-22

: about 1-5
: assigning interfaces to 4-23
: benefits of 4-22
: cautions to note 4-24
: channel number 4-23, 4-25
: configuration tasks 4-22
: configuring ISL over 4-25
: interface configuration 4-23
: port channels supported 4-22
: removing an interface from 4-24

Flash memory

: boot commands C-4
: copy command 2-9, 3-9
: copying between Flash memory cards 2-8, 3-9
: copying image to Flash card 2-11, 3-11
: deleting files from 2-6, 3-7
: formatting a card 2-7, 3-8
: squeeze command and 2-7, 3-7
: system image does not fit 2-8, 3-9
: viewing contents of 2-6, 3-6

full duplex aggregate capacity 1-5

FX fiber-optic FastEthernet module 4-5

G

: GEC 1-5
: Gigabit EtherChannel 4-22
: gigabit EtherChannel 1-5
: gigabit Ethernet interface, configuring 4-7
: gigabit Ethernet line module 1-4
: global configuration mode 1-13

H

: host portion of IP broadcast address C-5
: hostname command 2-5, 3-6
: HSRP 4-22

I

IGMP 4-15

IGRP 4-10

integrated routing and bridging

: See IRB.

interface bvi 4-21

interface configuration

: mode 1-13
: overview 4-3
: subinterfaces 1-13

interface port-channel command 4-22, 4-23, 4-25

interfaces

: supported by Catalyst 8510 1-2
: supported by Catalyst 8540 1-3

Internet Group Membership Protocol

: See IGMP.

Internet Protocol Multicast 4-15

Internetwork Packet Exchange

: See IPX

Inter-Switch Link protocol

: See ISL.

ip address command 4-11

IP addresses

: channel group and 1-5
: ISL configuration 4-9

IP multicast

: about 4-15
: IGMP 4-15
: PIM 4-15

ip multicast-routing command 4-16

ip pim command 4-16

IP routing protocols

: configuration tasks 4-9
: debugging commands 4-12
: NHRP and 4-10
: supported protocols 4-10

IPX

: characteristics of 4-12
: configuration tasks 4-13
: default encapsulation for 4-13
: encapsulation types 4-14
: external bridge 4-12
: network address 4-13
: network numbers 4-13
: NLSP not supported 4-13
: node numbers 4-13
: ODI compatibility 4-13
: parallel paths supported 4-13
: protocols and services used 4-13
: redistribution of route information with EIGRP 4-10
: subinterface configuration and 4-9

ipx maximum-paths command 4-14

ipx network command 4-14

ipx routing command 4-14

IRB 4-19

: BVI and 4-19
: configuration considerations 4-20
: configuration tasks 4-20
: displaying information about 4-21
: summary 1-11

ISL

: definition 4-7
: Fast EtherChannel and 4-22
: IP addresses and 4-9
: packet tagging 1-8
: summary of 1-8

L

: Layer 2 feature list 1-7
: Layer 3 feature list 1-9
: Layer 3 switch, functions of 1-4
: line module, ports on 4-4
: line vty command 2-3, 3-3
: load balancing 1-11

M

: MAC address of RP 3-3
: MAC address of SRP 2-3
: multicast, IP 4-15

N

: network command 4-11
: network layer feature list 1-9
: network numbers in IPX networks 4-13
: NHRP not supported 4-10
: NLSP not supported 4-13
: no boot system command 2-9, 3-9
: no channel-group command 4-24
: node numbers in IPX networks 4-13
: NVRAM 4-26

O

Open Shortest Path First

: See OSPF.

operating configuration, displaying 4-2

OSPF 4-10

: area concept in 4-10
: configuring 4-11
: network area command 4-12
: process ID 4-11

P

packet tagging 1-8

passwords, setting 2-4, 3-5

PCMCIA Flash memory slot 2-1, 3-1

physical port addresses 4-4

PIM 4-15

: configuration tasks 4-16
: dense mode 4-15
: rendezvous point 4-15
: reverse path forwarding 4-15
: sparse mode 4-15

port addresses 4-4

port channels 4-22

port speed, detecting 4-6

port-based snooping 1-6

powering on the system 2-2, 3-2

privileged EXEC mode 1-13

: tasks for 4-2

Protocol Independent Multicast

: See PIM.

pwd command 2-6, 3-6

Q

QoS

: about 1-5, 1-6
: assigning WRR-scheduling weights 5-4
: classes 5-1
: configuring 5-2
: finding effective bandwidth of circuit 5-2
: frame scheduling 5-1
: interface-level mapping 5-4
: queuing 5-1
: system-level mapping 5-3

qos mapping precedence command 5-3

Quality of Service

: See QoS.

R

reload command 2-3, 3-4

rendezvous point 4-15

reverse path forwarding 4-15

RIP 4-10

route processor

: about 3-1
: configuring 3-3
: MAC address, discovering 3-3

router eigrp command 4-11

router igrp command 4-11

router ospf command 4-11

router rip command 4-11

routing protocols supported 4-10

running configuration 4-26

: displaying 4-2

S

saving configuration changes 2-11, 3-12, 4-26

server response to bootload failure C-5

show arp 4-6

show bridge command 4-19

show bridge group 4-19

show bridge vlan 4-19

show controller 4-6

show epc cam int 4-17

show epc if-entry 4-16

show epc ipmcast 4-17

show epc patricia int 4-17

show hardware command 2-2, 3-2

show interface 4-6

show interface ethernet0 3-3

show interfaces bvi 4-21

show interfaces irb 4-21

show interfaces port-channel 4-26

show ip interfaces 4-12

show ip mroute 4-16

show ip protocol 4-12

show ip route 4-12

show ipx cache 4-14

show ipx interfaces 4-14

show ipx route 4-14

show ipx servers 4-14

show ipx traffic 4-14

show qos mapping 5-4

show qos switching 5-4

show running-config 4-26

show span 4-19

show vlan 4-9

show vlans 4-19

software configuration register

: boot command options C-4
: Break key, controlling C-5
: broadcast address
C-5
: changing C-2
: host portion of IP broadcast address C-5
: overview C-1
: server response to bootload failure C-5

sparse mode, PIM 4-15

speed auto command 4-6

squeeze command 2-7, 3-7

SRP

: Ethernet interface, configuring 2-2
: MAC address, discovering 2-3
: management port on 2-3

startup configuration 4-26

subinterface configuration, difference between IP and IPX 4-9

subinterfaces 1-13

switch route processor

: MAC address, discovering 2-3

switch router, functions of 1-4

system image

: backing up to TFTP server 2-10, 3-10
: copying to Flash memory card 2-11, 3-11
: does not fit on Flash memory card 2-8, 3-9

system power on 2-2, 3-2

T

: TFTP server, backing up system image to 2-10, 3-10
: trunk port 4-7

U

UDP turbo flooding 1-12

user EXEC mode

: tasks for 4-2
: usage 1-13

UTP Fast Ethernet line module 4-5

V

verifying

: 10/100BaseT configuration 4-6
: IP multicast operation 4-16
: IPX operation 4-14
: IRB operation 4-21
: VLAN operation 4-9

virtual circuit, effective bandwidth for 5-2

virtual LAN

: See VLAN.

VLAN

: about 1-7
: number per system 4-7
: routing 4-8
: trunk port 4-7

Table of Contents

INDEX