cc/td/doc/product/l3sw/8540/rel_12_0/w5_15
hometocprevnextglossaryfeedbacksearchhelp
PDF

Table of Contents

index

index

Numerics


10/100BaseT interface module
description   1-13
LEDs   4-9
memory capacity   1-13

100BaseFX interface module
description   1-13
LEDs   4-10
memory capacity   1-13

A


access control list. See ACL

ACL
built-in functionality   1-12
description   1-17, 3-30
general   1-17
hardware requirements   3-31
installing   3-30
interface modules supported   1-17
removing   3-36

ATM OC-12c uplink with enhanced Gigabit Ethernet interface module
description   1-14
LEDs   4-11
memory capacity   1-14

ATM OC-3c uplink with enhanced Gigabit Ethernet interface module
description   1-14
LEDs   4-11
memory capacity   1-14

C


cable and port pinouts   B-1

cabling interface modules   2-10

captive installation screws, interface module   3-19

Catalyst 8540 CSR description   1-1

commands
copy flash tftp   3-12
copy running-config tftp   3-7
copy tftp flash   3-14
show configuration   1-9, 3-24
show hardware   1-9, 3-31
show interface   1-9, 3-24

configuration, interface modules   3-24

connecting route processor to network   2-6

console port
connections   2-8
description   1-6
location   1-6
pinouts   B-4
route processor   1-6, 2-8

copy flash tftp command   3-12

copy running-config tftp command   3-7

copy tftp flash command   3-14

D


distance limitations for network connections   2-12

documentation
audience   xii
related   xv

E


EIA/TIA-232 port   2-8

eight-port interface module
description   1-10
LEDs   4-6
memory capacity   1-3
oversubscription factor (note)   1-10

electricity safety guidelines   2-2

electrostatic discharge damage, preventing   2-3

ESD, preventing   2-3

Ethernet port
pinouts   B-2
route processor   1-5, 2-7

F


fiber interface modules description   1-13

Figure   4-10, 4-11, 4-13

Flash memory SIMM
description   1-4
installing   3-10

Flash PC Cards
description   1-5
installing   3-15
placement   1-5
removing   3-16

G


GBIC
care and handling   3-28
installing   3-29
removing   3-30

Gigabit Ethernet
eight-port description   1-10
two-port description   1-11
two-port enhanced description   1-12

Gigabit Interface Converter. See GBIC

H


hot swapping
description   3-18
time limit (note)   3-18

I


IDs, port   1-8

installation
ACL   3-30
confirming   4-1
Flash memory SIMM   3-10
Flash PC Cards   3-15
GBIC   3-29
interface modules   3-21
route processor   3-2
switch processors   3-2
troubleshooting   4-3

interface modules
cabling   2-10
configuring   3-24
confirming installation   4-1
Ethernet   1-13
Ethernet port pinouts   B-2
Gigabit Ethernet   1-11, 1-12
installation screws   3-19
installing   3-21
interface names   1-8
multimode fiber   1-13, 1-14, 1-15
pinouts   B-1
placement   1-1
port numbers   1-8
release levers   3-19
removing   3-25
single-mode fiber   2-10
slot numbers   1-8
specifications   A-1
tools required for installation   3-20
troubleshooting   4-2

interface names   1-8

L


LEDs
10/100BaseT interface module   4-9
100BaseFX interface module   4-10
ATM OC-12c uplink with enhanced Gigabit Ethernet interface module   4-11
ATM OC-3c uplink with enhanced Gigabit Ethernet interface module   4-11
eight-port interface module   4-6
Packet-over-SONET OC-12c uplink with enhanced Gigabit Ethernet interface module   4-13
route processor   4-4
switch modules   4-4
two-port enhanced Gigabit Ethernet interface module   4-8
two-port Gigabit Ethernet interface module   4-7

line modules. See interface modules

M


Maximum dissipated power. See power, maximum dissipated

MT-RJ connectors   2-10, B-3

N


names, interface   1-8

network connections
connectors   2-10
distance limitations   2-12
preparing   2-6

P


Packet-over-SONET OC-12c uplink with enhanced Gigabit Ethernet interface module
description   1-15
LEDs   4-13
memory capacity   1-16

PAMs. See interface modules

pinouts
cables and ports   B-1
console port   B-4
RJ-45 Ethernet port   B-2

port adapter modules. See interface modules

port numbers, interface modules   1-8

POS uplink interface modules. See Packet-over-SONET uplink with enhanced Gigabit Ethernet interface module

Power, maximum dissipated   A-2

R


redundancy
description   1-3
route processor   1-3
switch processors   1-6

release levers, interface modules   3-19

removal
Flash memory SIMM   3-12
GBIC   3-30
interface modules   3-25
route processors   3-7
switch processors   3-7

RJ-45 connectors   2-10

route processor
confirming installation   4-1
console port   1-6
console port connection   2-8
console port pinouts   B-4
description   1-3
Ethernet port   1-5
Ethernet port connection   2-7
Ethernet port pinouts   B-2
Flash memory SIMM   1-4
Flash PC Cards   3-15
Flash PC Card slots   1-5
installing   3-2
LEDs   4-4
network connections   2-6
pinouts   B-1
placement   1-1
redundancy   1-3
removing   3-7
specifications   A-1

S


safety
electricity   2-2
preinstallation   2-1, 3-1
translated warnings   C-1

safety warnings, translated   C-1

show configuration command   1-9, 3-24

show hardware command   1-9, 3-31

show interface command   1-9, 3-24

slot numbers
interface module placement   1-1
interface modules   1-8
reserved   3-2
route processor placement   1-1
switch processor placement   1-1

specifications
interface modules   A-1
route processor   A-1
switch modules   A-1

switch modules
LEDs   4-4
specifications   A-1

switch processors
description   1-6
installing   3-2
placement   1-1
redundancy   1-6
removing   3-7

T


translated safety warnings   C-1

troubleshooting
installation flowchart   4-3
interface modules   4-2

two-port enhanced gigabit ethernet interface module
description   1-12
LEDs   4-8
memory capacity   1-12

two-port interface module
description   1-11
LEDs   4-7
memory capacity   1-11

W


warnings, translated   C-1

hometocprevnextglossaryfeedbacksearchhelp
Posted: Thu Aug 31 10:14:50 PDT 2000
Copyright 1989-2000©Cisco Systems Inc.