Table of Contents

Numerics
A
C
D
E
F
G
H
I
L
M
N
P
R
S
T
U
W

INDEX

Numerics

10/100BaseT line module          1-6

1000BaseT line module          1-7

100BaseFX line module          1-6

A

addresses, port          2-26

C

cable and port pinouts          B-1

cabling line modules          2-28

captive installation screws, line module          2-19

configuration

line modules          2-28

connecting route processor to network          2-13

console port

connections          2-15

pinouts          B-3

route processor          1-4, 2-14

copy flash tftp command          4-5

copy running-config tftp command          4-2

copy tftp flash command          4-9

copy tftp running-config command          4-4

D

distance limitations for network connections          2-6

E

EIA/TIA-232 port          2-14

electricity safety guidelines          2-3

electrostatic discharge damage

see ESD

ESD, preventing          2-4

Ethernet port

pinouts          B-2

route processor          1-3, 2-14

Ethernet UTP line module          1-6

F

fiber-optic connectors          2-7

fiber-optic line module          1-6

Flash memory card, installing          2-16

Flash memory SIMM

description          1-2

installing          4-7

removing          4-5

replacing          4-4

Flash PC card slots          1-3

G

GBIC

care and handling          4-13

installing          4-10

removing          4-13

replacing          4-10

Gigabit Ethernet line module

handling a GBIC          4-13

installing a GBIC          4-10

overview          1-7

removing a GBIC          4-13

replacing a GBIC          4-10

Gigabit Interface Carrier

See GBIC

H

hot swapping

line modules          2-18

I

installation

confirming          3-1

Flash memory card          2-16

Flash memory SIMM          4-7

GBIC          4-10

line module          2-18, 2-22

preparation          2-1

route processor          2-9

switch module          2-9

troubleshooting          3-3

L

LEDs

line module (figure)          2-29

route processor          3-4

route processor (figure)          1-2

switch module          3-4

switch module (figure)          1-4

line module

cabling          2-28

configuring          2-28

confirming installation          3-1

connecting cables          2-29

Ethernet port pinouts          B-2

Ethernet UTP          1-6

Gigabit Ethernet          1-7

hot swapping          2-18

installation screws          2-19

installing          2-18, 2-22

LEDs (figure)          2-29

multimode fiber          1-6

overview          1-5

pinouts          B-1

port addresses          2-26

port numbers          2-27

release levers          2-19

removing          2-18, 2-21

slot numbers          2-27

specifications          A-1

tools required for installation          2-20

troubleshooting          3-6

M

maximum transmission distances          2-7

MT-RJ connectors          2-7

multimode fiber Ethernet line module          1-6

N

network connections

connectors          2-7

distance limitations          2-6

maximum transmission distances          2-7

preparing          2-6

route processor          2-13

P

PAM

See line module

pinouts

cables and ports          B-1

console port          B-3

RJ-45 Ethernet port          B-2

port adapter

See line module

port addresses          2-26

port numbers, line module          2-27

preparing for installation          2-1

R

recommendations, safety          2-2

release levers, line module          2-19

removal

Flash memory SIMM          4-5

GBIC          4-13

line module          2-21

route processor          4-2

switch module          4-2

replacement

Flash memory SIMM          4-4

GBIC          4-10

route processor          4-2

switch module          4-2

RJ-45 connectors          2-7

route processor

confirming installation          3-1

console port          1-4

console port connection          2-14

console port pinouts          B-3

Ethernet port          1-3

Ethernet port connection          2-14

Ethernet port pinouts          B-2

Flash memory card          2-16

Flash memory SIMM          1-2

Flash PC card slots          1-3

installing          2-9

LEDs          3-4

LEDs (figure)          1-2

network connections          2-13

overview          1-1

pinouts          B-1

removing          4-2

replacing          4-2

replacing Flash memory SIMM          4-4

specifications          A-1

S

safety

electricity          2-3

general recommendations          2-2

safety warnings, translated          C-1

show configuration command          2-26

show hardware command          2-13

show interface command          2-26, 2-28

show interface ethernet command          2-28

slot numbers

line module          2-27

reserved          2-9

specifications

line module          A-1

route processor          A-1

switch module          A-1

switch module

installing          2-9

LEDs          3-4

LEDs (figure)          1-4

overview          1-4

removing          4-2

replacing          4-2

specifications          A-1

T

translated safety warnings          C-1

transmission distances, maximum          2-7

troubleshooting

installation flowchart          3-3

line modules          3-6

U

UTP line module          1-6

W

warnings, translated          C-1

Posted: Mon Jan 25 16:25:18 PST 1999
Copyright 1989-1999©Cisco Systems Inc.