Table of Contents
index
- 10/100BaseT line module 1-7
- 1000BaseT line module 1-8
- 100BaseFX line module 1-7
- access control list
- See ACL
- ACL
- daughter card (figure) 1-9
- description 1-8, 3-25
- installing 3-25
- interface modules supported 1-8
- removing 3-31
- tools needed 3-26
- additional documentation xi
- assistance
- See technical assistance
- audience, for this guide ix
- auxiliary port
- connections 2-9
- pinouts B-3
- route processor 1-5, 2-8
- cable and port pinouts B-1
- cabling interface modules 2-11
- captive installation screws, interface module 3-16
- chassis overview 1-1
- Cisco Connection Online xvii
- commands
- copy flash tftp 3-10
- copy running-config tftp 3-5
- copy tftp flash 3-9
- copy tftp running-config 3-5
- show configuration 3-19
- show interface 3-19
- connecting route processor to network 2-7
- console port
- connections 2-10
- pinouts B-4
- route processor 1-5, 2-8
- conventions, for this document xii
- copy flash tftp command 3-10
- copy running-config tftp command 3-5
- copy tftp flash command 3-9
- copy tftp running-config command 3-5
- distance limitations for network connections 2-6
- documentation
- CD-ROM xvi
- feedback xix
- ordering xvi
- related xi
- World Wide Web xvi
- EIA/TIA-232 ports 2-8
- ejector levers, interface module 3-16
- electricity safety guidelines 2-2
- ESD, preventing 2-3
- Ethernet port, route processor 1-5, 2-8
- Ethernet UTP line module 1-7
- fiber-optic line module 1-7
- Flash memory SIMM
- description 1-3
- installing 3-8
- GBIC
- cabling information B-5
- care and handling 3-23
- overview 1-8
- replacing 3-22
- Gigabit Interface Converter
- See GBIC
- help
- See technical assistance
- hot swapping interface modules 3-15
- installation
- ACL 3-25
- confirming 4-1
- Flash memory SIMM 3-8
- interface module 3-15, 3-17
- troubleshooting 4-3
- interface module
- cabling 2-11
- connecting cables 2-11
- ejector levers and installation screws 3-16
- hot swapping 3-15
- installing 3-15, 3-17
- LEDs 4-5
- pinouts B-1
- removing 3-15
- specifications A-1
- LEDs
- interface module 4-5
- route processor 1-4
- line module
- confirming installation 4-1
- Ethernet UTP 1-7
- Gigabit Ethernet 1-8
- multimode fiber 1-7
- overview 1-6
- troubleshooting 4-2
- network connections
- distance limitations 2-6
- preparing 2-6
- route processor 2-7
- new and changed information x
- organization x
- PC Card slots 1-5
- pinouts
- auxiliary port B-3
- cables and ports B-1
- console port B-4
- port adapter
- See interface module
- related documentation xi
- replacing
- Flash memory SIMM 3-7
- GBIC 3-22
- route processor 3-2
- replacing the route processor 3-2
- reset switch 1-4
- route processor
- auxiliary and console ports 1-5
- auxiliary port connection 2-8
- auxiliary port pinouts B-3
- confirming installation 4-1
- console port connection 2-8
- console port pinouts B-4
- Ethernet port 1-4
- Ethernet port connection 2-8
- Flash memory SIMM 1-3
- LEDs 1-4
- network connections 2-7
- overview 1-2
- PC Card slots 1-5
- pinouts B-1
- replacing Flash memory SIMM 3-7
- reset switch 1-4
- specifications A-1
- safety
- electricity 2-2
- safety warnings, translated C-1
- show configuration command 3-19
- show interface command 3-19
- slot numbers
- reserved 3-2
- SP
- See route processor
- specifications
- interface module A-1
- route processor A-1
- technical assistance xvi
- translated safety warnings C-1
- troubleshooting
- installation flowchart 4-3
- line modules 4-2
- UTP line module 1-7
- warnings, translated C-1
Posted: Mon Jun 26 07:45:28 PDT 2000
Copyright 1989 - 2000©Cisco Systems Inc.
