cc/td/doc/product/l3sw/4840g/ios_12/120_10
hometocprevnextglossaryfeedbacksearchhelp
PDF

Table of Contents

Cisco IOS Commands Not Supported in SLB Switching Software

Cisco IOS Commands Not Supported in SLB Switching Software

This appendix lists the Cisco IOS commands not supported in Server Load Balancing (SLB) and Layer 3 switching software (see Table B-1 through Table B-3). In general, commands are not supported on this platform because they hamper performance or they do not fit into the architectural requirements of this product.


Table B-1: General Commands Not Supported

clear ip accounting

clear ip nat translation

clear ip nhrp

encapsulation sde

ip accounting

ip accounting-list

ip accounting-threshold

ip accounting-transits

ip cache-invalidate-delay

ip flow-export

ip gdp gdp

ip gdp igrp

ip gdp irdp

ip gdp rip

ip mtu

ip nat

ip nat inside destination

ip nat inside source

ip nat outside source

ip route cache

ip security add

ip security aeso

ip security dedicated

ip security eso-info

ip security eso-max

ip security eso-min

ip security extended-allowed

ip security first

ip security ignore-authorities

ip security implicit-labelling

ip security multilevel

ip security reserved-allowed

ip security strip

ip tcp chunk-size

ip tcp compression-connections

ip tcp header-compression

ip tcp path-mtu-discovery

ip unnumbered

show ip accounting

show ip cache

show ip cache flow

show ip nat statistics

show ip nat translations

show ip nhrp

show ip nhrp traffic

show ip tcp header-compression

show sse summary

transmit-interface

tunnel mode


Table B-2: Bridge Commands Not Supported

access-list

bridge acquire

bridge address

bridge circuit-group pause

bridge circuit-group source-based

bridge cmf

bridge crb

bridge domain

bridge-group cbus-bridging

bridge-group circuit-group

bridge-group input-lat-service-permit

bridge-group input-lsap-list

bridge-group input-pattern-list

bridge-group input-type-list

bridge-group lat-compression

bridge-group output-address-list

bridge-group output-lat-service-deny

bridge-group output-lat-service-permit

bridge-group output-lsap-list

bridge-group output-pattern-list

bridge-group output-type-list

bridge-group sse

bridge lat-service-filtering

bridge multicast-source

clear sse

encapsulation sse

encapsulation sde

ethernet-transit-oui

frame-relay map bridge broadcast

show bridge multicast

show interfaces crb

show sse summary

x25 map bridge


Table B-3: Miscellaneous Commands Not Supported

rmon native

standby MAC refresh


hometocprevnextglossaryfeedbacksearchhelp
Posted: Thu Sep 28 15:24:16 PDT 2000
Copyright 1989-2000©Cisco Systems Inc.