- 1000BaseLX/LH 2-6
- 1000BaseSX 2-6
- 1000BaseX (Gigabit Ethernet) 1-1
- 1000BaseZX 2-6
- 100BaseT (Fast Ethernet) 1-1
- 10BaseT (Ethernet) 1-1
- airflow
- direction 1-5
- direction (figure) 1-5
- fan failure 1-5
- fans 1-5
- specifications A-2
- auxiliary ports
- description 1-2
- specifications A-4
- Catalyst 2948G-L3 switch router
- applications 1-1
- components 1-2
- labeling 1-3
- specifications A-1
- CCO
- access xii
- services xi
- chassis
- cooling 1-5
- dimensions A-2
- labeling 1-3
- commands
- show diag power-on 2-14
- show interface 2-12
- components
- fans 1-5
- GBICs 2-6
- power supplies 1-5
- switching A-1
- console ports
- description 1-2
- specifications A-3
- conventions
- cautions viii
- description viii
- notes viii
- warning viii
- customer service B-5
- differential mode delay
- See DMD
- dimensions
- chassis A-2
- equipment rack 2-4
- DMD
- advantages 2-8
- description 2-7
- occurrences 2-8
- solution 2-9
- documentation
- audience vii
- CCO xii
- CD-ROM xii
- conventions viii
- organization vii
- related viii
- environmental monitoring
- description 1-6
- power supplies 1-6
- Ethernet
- 10BaseT 1-1
- Fast (100BaseT) 1-1
- Gigabit (1000BaseX) 1-1
- fans
- airflow 1-5
- description 1-5
- failure 1-5
- troubleshooting B-2
- Fast Ethernet (100BaseT) 1-1
- GBICs
- care 2-10
- compliance 2-7
- description 2-6
- description (figure) 2-6
- handling 2-10
- installation 2-10
- lifetime 2-10
- maintenance 2-10
- plug removal (caution) 2-11
- removing 2-12
- third party vendors (note) 2-6
- Gigabit Ethernet (1000BaseX) 1-1
- Gigabit Ethernet ports
- connecting to 2-12
- connectors 2-12
- specifications A-5
- Gigabit Interface Converters
- See GBICs
- heat dissipation
- determining 2-3
- power 2-3
- installing
- GBICs 2-10
- patch cords 2-7
- L brackets
- attaching 2-4
- attaching (figure) 2-5
- laser transmission
- description 2-7 to 2-9
- figure 2-9
- LEDs
- description B-3
- description (table) 1-4
- link 1-3
- link status 1-3
- location 1-3
- port (figure) 1-3, 1-4
- power supplies 1-3, B-3
- RPSs 1-3
- switching port 1-3
- link status LEDs
- description (table) 1-4
- figure 1-3
- management ports
- auxiliary 1-2
- console 1-2
- mounting posts
- dimensions 2-4
- L brackets 2-5
- patch cords
- compliance 2-7
- description 2-6
- installing 2-7
- requirements 2-6
- pinouts
- auxiliary port A-4
- console port A-3
- ports
- 10/100BaseT 1-3
- auxiliary 1-2
- auxiliary pinouts (table) A-4
- configured 1-3
- console 1-2
- console pinouts (table) A-3
- Gigabit Ethernet 1-2
- labeling 1-3
- numbering 1-3
- numbering (figure) 1-3
- specifications A-3 to A-5
- switching 1-2
- power
- connecting 2-5
- general requirements 2-2
- heat dissipation 2-3
- loss prevention 2-2
- maximum load (caution) 2-3
- multiple connections (caution) 2-14
- redundant (note) 2-3
- site requirements 2-3
- specifications A-2
- troubleshooting B-2
- power supplies
- description 1-5
- environmental monitoring 1-6
- LEDs B-3
- redundant 1-5
- troubleshooting B-3, B-4
- rack-mounting
- figure 2-5
- guidelines 2-3
- preparing for 2-3
- system 2-3
- redundant power supply units
- See RPSs
- removing
- GBICs 2-12
- screws 2-4
- RPSs
- description 1-5
- LEDs 1-3
- troubleshooting B-4
- safety
- preinstall 2-1
- translated warnings C-1
- service and support B-5
- site planning
- general requirements 2-2
- overview 2-2
- specifications
- auxiliary ports A-4
- cable A-1
- Catalyst 2948G-L3 switch A-1
- Catalyst 2948G-L3 switch router A-1
- console ports A-3
- frequency A-2
- GBIC cabling (table) A-5
- Gigabit Ethernet ports A-5
- memory A-1
- power A-2
- status LEDs 1-4
- switch router
- See Catalyst 2948G-L3 switch router
- temperature
- ambient 2-2
- environmental monitor 2-2
- thresholds 2-2
- tools
- required 2-3
- troubleshooting
- contacting customer service B-5
- methodology B-2
- power supplies B-3, B-4
- warnings
- conventions ix
- description ix
- translated C-1
- weight, chassis A-2
Copyright 1989-1999
©
Cisco Systems Inc.
