Table of Contents
index
- 2nd Number Delimiter 5-9
- ad hoc 1-3
- agency compliance A-2
- cable
- null modem B-5
- proprietary 3-5, B-1
- Terminal/Modem 3-3, B-3
- cable connectors
- pinouts B-1
- cascading 1-3
- change password 5-3, 7-15
- Cisco Connection Online (CCO) xvii
- Cisco Documentation CD-ROM xvii
- component interactions 8-5
- conference ID 1-3
- configuration software
- navigation buttons (table) 4-4
- configuration software buttons 4-4
- configuration source
- Current 5-4
- Plug & Play 5-4
- Source 5-4
- configuration station requirements 4-2
- connecting to the LAN 3-5
- Date/Time Settings 5-6
- default router 5-7
- EIA/TIA-366 signalling 3-5
- eliminating the network 8-6
- features 1-5
- function buttons 4-3
- gatekeeper
- default 5-7
- port 5-7
- H.323 components
- gatekeeper 1-2
- gateway 1-3
- MCU 1-2
- terminal 1-2
- hardware specifications A-1
- Incoming Default Bandwidth 5-9
- installation
- connecting to the LAN 3-5
- power cable 3-8
- introduction 1-1
- LEDs 1-6
- colors 1-6
- indications 1-6
- LINK 1-7
- PWR 1-6
- SESSION 1-7
- SESSION (1) 1-7
- SESSION (2) 1-7
- TEST 1-6
- load balancing 1-3
- MCU 1-2
- multipoint control unit 1-2
- monitoring, the Gateway 7-4
- mounting kit 3-4
- multipoint controller
- MC 1-2
- multipoint processor
- MP 1-2
- network
- problems 8-7
- notes, usage in text xiv
- Outgoing Default Bandwidth 5-9
- package contents 3-2
- panel
- front 1-6
- rear 1-7
- phone number
- E.164 address 5-8
- ping command 8-4
- port
- EIA/TIA-366 signalling 3-5
- V.35 3-5
- ports
- gatekeeper 5-7
- LAN 1-8, 5-8
- serial 1-8
- power
- cable connection 3-8
- voltage 1-8
- problems
- network 8-7
- quick installation instructions 2-2
- Remote Diagnostic 7-5
- configuration status of all WAN ports 7-9
- configuration status per single WAN port 7-10
- LAN ports configuration 7-8
- LAN ports status 7-7
- VTA ports configuration 7-8
- VTA port status 7-6
- WAN ports configuration 7-9
- WAN ports status 7-7
- Remote Diagnostics Utility 7-4
- safety warnings xiv
- second number delimiter 5-9
- serial connector
- null modem cable B-3
- setting IP address 3-2
- setting up system 2-1
- setting up your system 2-1
- shortcut keys 4-3
- Software Upload Utility C-2
- Source 5-5
- source
- set 5-5
- stacking 1-3
- T.120 7-16
- technical specifications A-1
- terminal emulator 1-7
- Terminal ID 5-7
- troubleshooting 8-1
- Unit IP 5-2
- upgrading VTA software C-1
- uploading file to memory 5-12
- utilities
- Remote Diagnostics 7-4
- V.35 interface 3-5
- VTA
- features 1-5
- physical description 1-6







Posted: Mon Jun 5 13:36:32 PDT 2000
Copyright 1989 - 2000©Cisco Systems Inc.